drivers/usb/host/ohci-s3c2410.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * USB Bus Glue for Samsung S3C2410
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Russell King et al.
  12  *
  13  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
  14  *      by Ben Dooks, <ben@simtec.co.uk>
  15  *      Copyright (C) 2004 Simtec Electronics
  16  *
  17  * Thanks to basprog@mail.ru for updates to newer kernels
  18  *
  19  * This file is licenced under the GPL.
  20 */
  21
  22 #include <linux/platform_device.h>
  23 #include <linux/clk.h>
  24 #include <plat/usb-control.h>
  25
  26 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
  27
  28 /* clock device associated with the hcd */
  29
  30 static struct clk *clk;
  31 static struct clk *usb_clk;
  32
  33 /* forward definitions */
  34
  35 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
  36
  37 /* conversion functions */
  38
  39 static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
  40 {
  41         return hcd->self.controller->platform_data;
  42 }
  43
  44 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
  45 {
  46         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  47
  48         dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
  49
  50         clk_enable(usb_clk);
  51         mdelay(2);                      /* let the bus clock stabilise */
  52
  53         clk_enable(clk);
  54
  55         if (info != NULL) {
  56                 info->hcd       = hcd;
  57                 info->report_oc = s3c2410_hcd_oc;
  58
  59                 if (info->enable_oc != NULL)
  60                         (info->enable_oc)(info, 1);
  61         }
  62 }
  63
  64 static void s3c2410_stop_hc(struct platform_device *dev)
  65 {
  66         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  67
  68         dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
  69
  70         if (info != NULL) {
  71                 info->report_oc = NULL;
  72                 info->hcd       = NULL;
  73
  74                 if (info->enable_oc != NULL)
  75                         (info->enable_oc)(info, 0);
  76         }
  77
  78         clk_disable(clk);
  79         clk_disable(usb_clk);
  80 }
  81
  82 /* ohci_s3c2410_hub_status_data
  83  *
  84  * update the status data from the hub with anything that
  85  * has been detected by our system
  86 */
  87
  88 static int
  89 ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf)
  90 {
  91         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
  92         struct s3c2410_hcd_port *port;
  93         int orig;
  94         int portno;
  95
  96         orig  = ohci_hub_status_data(hcd, buf);
  97
  98         if (info == NULL)
  99                 return orig;
 100
 101         port = &info->port[0];
 102
 103         /* mark any changed port as changed */
 104
 105         for (portno = 0; portno < 2; port++, portno++) {
 106                 if (port->oc_changed == 1 &&
 107                     port->flags & S3C_HCDFLG_USED) {
 108                         dev_dbg(hcd->self.controller,
 109                                 "oc change on port %d\n", portno);
 110
 111                         if (orig < 1)
 112                                 orig = 1;
 113
 114                         buf[0] |= 1<<(portno+1);
 115                 }
 116         }
 117
 118         return orig;
 119 }
 120
 121 /* s3c2410_usb_set_power
 122  *
 123  * configure the power on a port, by calling the platform device
 124  * routine registered with the platform device
 125 */
 126
 127 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
 128                                   int port, int to)
 129 {
 130         if (info == NULL)
 131                 return;
 132
 133         if (info->power_control != NULL) {
 134                 info->port[port-1].power = to;
 135                 (info->power_control)(port-1, to);
 136         }
 137 }
 138
 139 /* ohci_s3c2410_hub_control
 140  *
 141  * look at control requests to the hub, and see if we need
 142  * to take any action or over-ride the results from the
 143  * request.
 144 */
 145
 146 static int ohci_s3c2410_hub_control(
 147         struct usb_hcd  *hcd,
 148         u16             typeReq,
 149         u16             wValue,
 150         u16             wIndex,
 151         char            *buf,
 152         u16             wLength)
 153 {
 154         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
 155         struct usb_hub_descriptor *desc;
 156         int ret = -EINVAL;
 157         u32 *data = (u32 *)buf;
 158
 159         dev_dbg(hcd->self.controller,
 160                 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 161                 hcd, typeReq, wValue, wIndex, buf, wLength);
 162
 163         /* if we are only an humble host without any special capabilities
 164          * process the request straight away and exit */
 165
 166         if (info == NULL) {
 167                 ret = ohci_hub_control(hcd, typeReq, wValue,
 168                                        wIndex, buf, wLength);
 169                 goto out;
 170         }
 171
 172         /* check the request to see if it needs handling */
 173
 174         switch (typeReq) {
 175         case SetPortFeature:
 176                 if (wValue == USB_PORT_FEAT_POWER) {
 177                         dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
 178                         s3c2410_usb_set_power(info, wIndex, 1);
 179                         goto out;
 180                 }
 181                 break;
 182
 183         case ClearPortFeature:
 184                 switch (wValue) {
 185                 case USB_PORT_FEAT_C_OVER_CURRENT:
 186                         dev_dbg(hcd->self.controller,
 187                                 "ClearPortFeature: C_OVER_CURRENT\n");
 188
 189                         if (valid_port(wIndex)) {
 190                                 info->port[wIndex-1].oc_changed = 0;
 191                                 info->port[wIndex-1].oc_status = 0;
 192                         }
 193
 194                         goto out;
 195
 196                 case USB_PORT_FEAT_OVER_CURRENT:
 197                         dev_dbg(hcd->self.controller,
 198                                 "ClearPortFeature: OVER_CURRENT\n");
 199
 200                         if (valid_port(wIndex))
 201                                 info->port[wIndex-1].oc_status = 0;
 202
 203                         goto out;
 204
 205                 case USB_PORT_FEAT_POWER:
 206                         dev_dbg(hcd->self.controller,
 207                                 "ClearPortFeature: POWER\n");
 208
 209                         if (valid_port(wIndex)) {
 210                                 s3c2410_usb_set_power(info, wIndex, 0);
 211                                 return 0;
 212                         }
 213                 }
 214                 break;
 215         }
 216
 217         ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 218         if (ret)
 219                 goto out;
 220
 221         switch (typeReq) {
 222         case GetHubDescriptor:
 223
 224                 /* update the hub's descriptor */
 225
 226                 desc = (struct usb_hub_descriptor *)buf;
 227
 228                 if (info->power_control == NULL)
 229                         return ret;
 230
 231                 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
 232                         desc->wHubCharacteristics);
 233
 234                 /* remove the old configurations for power-switching, and
 235                  * over-current protection, and insert our new configuration
 236                  */
 237
 238                 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
 239                 desc->wHubCharacteristics |= cpu_to_le16(0x0001);
 240
 241                 if (info->enable_oc) {
 242                         desc->wHubCharacteristics &= ~cpu_to_le16(
 243                                 HUB_CHAR_OCPM);
 244                         desc->wHubCharacteristics |=  cpu_to_le16(
 245                                 0x0008 |
 246                                 0x0001);
 247                 }
 248
 249                 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
 250                         desc->wHubCharacteristics);
 251
 252                 return ret;
 253
 254         case GetPortStatus:
 255                 /* check port status */
 256
 257                 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
 258
 259                 if (valid_port(wIndex)) {
 260                         if (info->port[wIndex-1].oc_changed)
 261                                 *data |= cpu_to_le32(RH_PS_OCIC);
 262
 263                         if (info->port[wIndex-1].oc_status)
 264                                 *data |= cpu_to_le32(RH_PS_POCI);
 265                 }
 266         }
 267
 268  out:
 269         return ret;
 270 }
 271
 272 /* s3c2410_hcd_oc
 273  *
 274  * handle an over-current report
 275 */
 276
 277 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
 278 {
 279         struct s3c2410_hcd_port *port;
 280         struct usb_hcd *hcd;
 281         unsigned long flags;
 282         int portno;
 283
 284         if (info == NULL)
 285                 return;
 286
 287         port = &info->port[0];
 288         hcd = info->hcd;
 289
 290         local_irq_save(flags);
 291
 292         for (portno = 0; portno < 2; port++, portno++) {
 293                 if (port_oc & (1<<portno) &&
 294                     port->flags & S3C_HCDFLG_USED) {
 295                         port->oc_status = 1;
 296                         port->oc_changed = 1;
 297
 298                         /* ok, once over-current is detected,
 299                            the port needs to be powered down */
 300                         s3c2410_usb_set_power(info, portno+1, 0);
 301                 }
 302         }
 303
 304         local_irq_restore(flags);
 305 }
 306
 307 /* may be called without controller electrically present */
 308 /* may be called with controller, bus, and devices active */
 309
 310 /*
 311  * usb_hcd_s3c2410_remove - shutdown processing for HCD
 312  * @dev: USB Host Controller being removed
 313  * Context: !in_interrupt()
 314  *
 315  * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
 316  * the HCD's stop() method.  It is always called from a thread
 317  * context, normally "rmmod", "apmd", or something similar.
 318  *
 319 */
 320
 321 static void
 322 usb_hcd_s3c2410_remove(struct usb_hcd *hcd, struct platform_device *dev)
 323 {
 324         usb_remove_hcd(hcd);
 325         s3c2410_stop_hc(dev);
 326         iounmap(hcd->regs);
 327         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 328         usb_put_hcd(hcd);
 329 }
 330
 331 /**
 332  * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
 333  * Context: !in_interrupt()
 334  *
 335  * Allocates basic resources for this USB host controller, and
 336  * then invokes the start() method for the HCD associated with it
 337  * through the hotplug entry's driver_data.
 338  *
 339  */
 340 static int usb_hcd_s3c2410_probe(const struct hc_driver *driver,
 341                                   struct platform_device *dev)
 342 {
 343         struct usb_hcd *hcd = NULL;
 344         int retval;
 345
 346         s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
 347         s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
 348
 349         hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
 350         if (hcd == NULL)
 351                 return -ENOMEM;
 352
 353         hcd->rsrc_start = dev->resource[0].start;
 354         hcd->rsrc_len   = resource_size(&dev->resource[0]);
 355
 356         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 357                 dev_err(&dev->dev, "request_mem_region failed\n");
 358                 retval = -EBUSY;
 359                 goto err_put;
 360         }
 361
 362         clk = clk_get(&dev->dev, "usb-host");
 363         if (IS_ERR(clk)) {
 364                 dev_err(&dev->dev, "cannot get usb-host clock\n");
 365                 retval = PTR_ERR(clk);
 366                 goto err_mem;
 367         }
 368
 369         usb_clk = clk_get(&dev->dev, "usb-bus-host");
 370         if (IS_ERR(usb_clk)) {
 371                 dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
 372                 retval = PTR_ERR(usb_clk);
 373                 goto err_clk;
 374         }
 375
 376         s3c2410_start_hc(dev, hcd);
 377
 378         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 379         if (!hcd->regs) {
 380                 dev_err(&dev->dev, "ioremap failed\n");
 381                 retval = -ENOMEM;
 382                 goto err_ioremap;
 383         }
 384
 385         ohci_hcd_init(hcd_to_ohci(hcd));
 386
 387         retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
 388         if (retval != 0)
 389                 goto err_ioremap;
 390
 391         return 0;
 392
 393  err_ioremap:
 394         s3c2410_stop_hc(dev);
 395         iounmap(hcd->regs);
 396         clk_put(usb_clk);
 397
 398  err_clk:
 399         clk_put(clk);
 400
 401  err_mem:
 402         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 403
 404  err_put:
 405         usb_put_hcd(hcd);
 406         return retval;
 407 }
 408
 409 /*-------------------------------------------------------------------------*/
 410
 411 static int
 412 ohci_s3c2410_start(struct usb_hcd *hcd)
 413 {
 414         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 415         int ret;
 416
 417         ret = ohci_init(ohci);
 418         if (ret < 0)
 419                 return ret;
 420
 421         ret = ohci_run(ohci);
 422         if (ret < 0) {
 423                 err("can't start %s", hcd->self.bus_name);
 424                 ohci_stop(hcd);
 425                 return ret;
 426         }
 427
 428         return 0;
 429 }
 430
 431
 432 static const struct hc_driver ohci_s3c2410_hc_driver = {
 433         .description =          hcd_name,
 434         .product_desc =         "S3C24XX OHCI",
 435         .hcd_priv_size =        sizeof(struct ohci_hcd),
 436
 437         /*
 438          * generic hardware linkage
 439          */
 440         .irq =                  ohci_irq,
 441         .flags =                HCD_USB11 | HCD_MEMORY,
 442
 443         /*
 444          * basic lifecycle operations
 445          */
 446         .start =                ohci_s3c2410_start,
 447         .stop =                 ohci_stop,
 448         .shutdown =             ohci_shutdown,
 449
 450         /*
 451          * managing i/o requests and associated device resources
 452          */
 453         .urb_enqueue =          ohci_urb_enqueue,
 454         .urb_dequeue =          ohci_urb_dequeue,
 455         .endpoint_disable =     ohci_endpoint_disable,
 456
 457         /*
 458          * scheduling support
 459          */
 460         .get_frame_number =     ohci_get_frame,
 461
 462         /*
 463          * root hub support
 464          */
 465         .hub_status_data =      ohci_s3c2410_hub_status_data,
 466         .hub_control =          ohci_s3c2410_hub_control,
 467 #ifdef  CONFIG_PM
 468         .bus_suspend =          ohci_bus_suspend,
 469         .bus_resume =           ohci_bus_resume,
 470 #endif
 471         .start_port_reset =     ohci_start_port_reset,
 472 };
 473
 474 /* device driver */
 475
 476 static int __devinit ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
 477 {
 478         return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
 479 }
 480
 481 static int __devexit ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
 482 {
 483         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 484
 485         usb_hcd_s3c2410_remove(hcd, pdev);
 486         return 0;
 487 }
 488
 489 #ifdef CONFIG_PM
 490 static int ohci_hcd_s3c2410_drv_suspend(struct device *dev)
 491 {
 492         struct usb_hcd *hcd = dev_get_drvdata(dev);
 493         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 494         struct platform_device *pdev = to_platform_device(dev);
 495         unsigned long flags;
 496         int rc = 0;
 497
 498         /*
 499          * Root hub was already suspended. Disable irq emission and
 500          * mark HW unaccessible, bail out if RH has been resumed. Use
 501          * the spinlock to properly synchronize with possible pending
 502          * RH suspend or resume activity.
 503          */
 504         spin_lock_irqsave(&ohci->lock, flags);
 505         if (ohci->rh_state != OHCI_RH_SUSPENDED) {
 506                 rc = -EINVAL;
 507                 goto bail;
 508         }
 509
 510         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 511
 512         s3c2410_stop_hc(pdev);
 513 bail:
 514         spin_unlock_irqrestore(&ohci->lock, flags);
 515
 516         return rc;
 517 }
 518
 519 static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
 520 {
 521         struct usb_hcd *hcd = dev_get_drvdata(dev);
 522         struct platform_device *pdev = to_platform_device(dev);
 523
 524         s3c2410_start_hc(pdev, hcd);
 525
 526         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 527         ohci_finish_controller_resume(hcd);
 528
 529         return 0;
 530 }
 531 #else
 532 #define ohci_hcd_s3c2410_drv_suspend    NULL
 533 #define ohci_hcd_s3c2410_drv_resume     NULL
 534 #endif
 535
 536 static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = {
 537         .suspend        = ohci_hcd_s3c2410_drv_suspend,
 538         .resume         = ohci_hcd_s3c2410_drv_resume,
 539 };
 540
 541 static struct platform_driver ohci_hcd_s3c2410_driver = {
 542         .probe          = ohci_hcd_s3c2410_drv_probe,
 543         .remove         = __devexit_p(ohci_hcd_s3c2410_drv_remove),
 544         .shutdown       = usb_hcd_platform_shutdown,
 545         .driver         = {
 546                 .owner  = THIS_MODULE,
 547                 .name   = "s3c2410-ohci",
 548                 .pm     = &ohci_hcd_s3c2410_pm_ops,
 549         },
 550 };
 551
 552 MODULE_ALIAS("platform:s3c2410-ohci");