i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / usb / musb / musb_core.h
blob3d28fb8a2dc949d3aa7605a5b80c2471da18c565
1 /*
2 * MUSB OTG driver defines
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #ifndef __MUSB_CORE_H__
36 #define __MUSB_CORE_H__
38 #include <linux/slab.h>
39 #include <linux/list.h>
40 #include <linux/interrupt.h>
41 #include <linux/errno.h>
42 #include <linux/timer.h>
43 #include <linux/device.h>
44 #include <linux/usb/ch9.h>
45 #include <linux/usb/gadget.h>
46 #include <linux/usb.h>
47 #include <linux/usb/otg.h>
48 #include <linux/usb/musb.h>
50 struct musb;
51 struct musb_hw_ep;
52 struct musb_ep;
54 /* Helper defines for struct musb->hwvers */
55 #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f)
56 #define MUSB_HWVERS_MINOR(x) (x & 0x3ff)
57 #define MUSB_HWVERS_RC 0x8000
58 #define MUSB_HWVERS_1300 0x52C
59 #define MUSB_HWVERS_1400 0x590
60 #define MUSB_HWVERS_1800 0x720
61 #define MUSB_HWVERS_1900 0x784
62 #define MUSB_HWVERS_2000 0x800
64 #include "musb_debug.h"
65 #include "musb_dma.h"
67 #include "musb_io.h"
68 #include "musb_regs.h"
70 #include "musb_gadget.h"
71 #include <linux/usb/hcd.h>
72 #include "musb_host.h"
74 #define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST)
75 #define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL)
76 #define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG)
78 /* NOTE: otg and peripheral-only state machines start at B_IDLE.
79 * OTG or host-only go to A_IDLE when ID is sensed.
81 #define is_peripheral_active(m) (!(m)->is_host)
82 #define is_host_active(m) ((m)->is_host)
84 #ifndef CONFIG_HAVE_CLK
85 /* Dummy stub for clk framework */
86 #define clk_get(dev, id) NULL
87 #define clk_put(clock) do {} while (0)
88 #define clk_enable(clock) do {} while (0)
89 #define clk_disable(clock) do {} while (0)
90 #endif
92 #ifdef CONFIG_PROC_FS
93 #include <linux/fs.h>
94 #define MUSB_CONFIG_PROC_FS
95 #endif
97 /****************************** PERIPHERAL ROLE *****************************/
99 #define is_peripheral_capable() (1)
101 extern irqreturn_t musb_g_ep0_irq(struct musb *);
102 extern void musb_g_tx(struct musb *, u8);
103 extern void musb_g_rx(struct musb *, u8);
104 extern void musb_g_reset(struct musb *);
105 extern void musb_g_suspend(struct musb *);
106 extern void musb_g_resume(struct musb *);
107 extern void musb_g_wakeup(struct musb *);
108 extern void musb_g_disconnect(struct musb *);
110 /****************************** HOST ROLE ***********************************/
112 #define is_host_capable() (1)
114 extern irqreturn_t musb_h_ep0_irq(struct musb *);
115 extern void musb_host_tx(struct musb *, u8);
116 extern void musb_host_rx(struct musb *, u8);
118 /****************************** CONSTANTS ********************************/
120 #ifndef MUSB_C_NUM_EPS
121 #define MUSB_C_NUM_EPS ((u8)16)
122 #endif
124 #ifndef MUSB_MAX_END0_PACKET
125 #define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
126 #endif
128 /* host side ep0 states */
129 enum musb_h_ep0_state {
130 MUSB_EP0_IDLE,
131 MUSB_EP0_START, /* expect ack of setup */
132 MUSB_EP0_IN, /* expect IN DATA */
133 MUSB_EP0_OUT, /* expect ack of OUT DATA */
134 MUSB_EP0_STATUS, /* expect ack of STATUS */
135 } __attribute__ ((packed));
137 /* peripheral side ep0 states */
138 enum musb_g_ep0_state {
139 MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */
140 MUSB_EP0_STAGE_SETUP, /* received SETUP */
141 MUSB_EP0_STAGE_TX, /* IN data */
142 MUSB_EP0_STAGE_RX, /* OUT data */
143 MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */
144 MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */
145 MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */
146 } __attribute__ ((packed));
149 * OTG protocol constants. See USB OTG 1.3 spec,
150 * sections 5.5 "Device Timings" and 6.6.5 "Timers".
152 #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */
153 #define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */
154 #define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
155 #define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
158 /*************************** REGISTER ACCESS ********************************/
160 /* Endpoint registers (other than dynfifo setup) can be accessed either
161 * directly with the "flat" model, or after setting up an index register.
164 #if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
165 || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
166 || defined(CONFIG_ARCH_OMAP4)
167 /* REVISIT indexed access seemed to
168 * misbehave (on DaVinci) for at least peripheral IN ...
170 #define MUSB_FLAT_REG
171 #endif
173 /* TUSB mapping: "flat" plus ep0 special cases */
174 #if defined(CONFIG_USB_MUSB_TUSB6010) || \
175 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
176 #define musb_ep_select(_mbase, _epnum) \
177 musb_writeb((_mbase), MUSB_INDEX, (_epnum))
178 #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
180 /* "flat" mapping: each endpoint has its own i/o address */
181 #elif defined(MUSB_FLAT_REG)
182 #define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum)))
183 #define MUSB_EP_OFFSET MUSB_FLAT_OFFSET
185 /* "indexed" mapping: INDEX register controls register bank select */
186 #else
187 #define musb_ep_select(_mbase, _epnum) \
188 musb_writeb((_mbase), MUSB_INDEX, (_epnum))
189 #define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET
190 #endif
192 /****************************** FUNCTIONS ********************************/
194 #define MUSB_HST_MODE(_musb)\
195 { (_musb)->is_host = true; }
196 #define MUSB_DEV_MODE(_musb) \
197 { (_musb)->is_host = false; }
199 #define test_devctl_hst_mode(_x) \
200 (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
202 #define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
204 /******************************** TYPES *************************************/
207 * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
208 * @init: turns on clocks, sets up platform-specific registers, etc
209 * @exit: undoes @init
210 * @set_mode: forcefully changes operating mode
211 * @try_ilde: tries to idle the IP
212 * @vbus_status: returns vbus status if possible
213 * @set_vbus: forces vbus status
214 * @adjust_channel_params: pre check for standard dma channel_program func
216 struct musb_platform_ops {
217 int (*init)(struct musb *musb);
218 int (*exit)(struct musb *musb);
220 void (*enable)(struct musb *musb);
221 void (*disable)(struct musb *musb);
223 int (*set_mode)(struct musb *musb, u8 mode);
224 void (*try_idle)(struct musb *musb, unsigned long timeout);
226 int (*vbus_status)(struct musb *musb);
227 void (*set_vbus)(struct musb *musb, int on);
229 int (*adjust_channel_params)(struct dma_channel *channel,
230 u16 packet_sz, u8 *mode,
231 dma_addr_t *dma_addr, u32 *len);
235 * struct musb_hw_ep - endpoint hardware (bidirectional)
237 * Ordered slightly for better cacheline locality.
239 struct musb_hw_ep {
240 struct musb *musb;
241 void __iomem *fifo;
242 void __iomem *regs;
244 #if defined(CONFIG_USB_MUSB_TUSB6010) || \
245 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
246 void __iomem *conf;
247 #endif
249 /* index in musb->endpoints[] */
250 u8 epnum;
252 /* hardware configuration, possibly dynamic */
253 bool is_shared_fifo;
254 bool tx_double_buffered;
255 bool rx_double_buffered;
256 u16 max_packet_sz_tx;
257 u16 max_packet_sz_rx;
259 struct dma_channel *tx_channel;
260 struct dma_channel *rx_channel;
262 #if defined(CONFIG_USB_MUSB_TUSB6010) || \
263 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
264 /* TUSB has "asynchronous" and "synchronous" dma modes */
265 dma_addr_t fifo_async;
266 dma_addr_t fifo_sync;
267 void __iomem *fifo_sync_va;
268 #endif
270 void __iomem *target_regs;
272 /* currently scheduled peripheral endpoint */
273 struct musb_qh *in_qh;
274 struct musb_qh *out_qh;
276 u8 rx_reinit;
277 u8 tx_reinit;
279 /* peripheral side */
280 struct musb_ep ep_in; /* TX */
281 struct musb_ep ep_out; /* RX */
284 static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep)
286 return next_request(&hw_ep->ep_in);
289 static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep)
291 return next_request(&hw_ep->ep_out);
294 struct musb_csr_regs {
295 /* FIFO registers */
296 u16 txmaxp, txcsr, rxmaxp, rxcsr;
297 u16 rxfifoadd, txfifoadd;
298 u8 txtype, txinterval, rxtype, rxinterval;
299 u8 rxfifosz, txfifosz;
300 u8 txfunaddr, txhubaddr, txhubport;
301 u8 rxfunaddr, rxhubaddr, rxhubport;
304 struct musb_context_registers {
306 u8 power;
307 u16 intrtxe, intrrxe;
308 u8 intrusbe;
309 u16 frame;
310 u8 index, testmode;
312 u8 devctl, busctl, misc;
313 u32 otg_interfsel;
315 struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
319 * struct musb - Driver instance data.
321 struct musb {
322 /* device lock */
323 spinlock_t lock;
325 const struct musb_platform_ops *ops;
326 struct musb_context_registers context;
328 irqreturn_t (*isr)(int, void *);
329 struct work_struct irq_work;
330 struct work_struct otg_notifier_work;
331 u16 hwvers;
333 /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
334 #define MUSB_PORT_STAT_RESUME (1 << 31)
336 u32 port1_status;
338 unsigned long rh_timer;
340 enum musb_h_ep0_state ep0_stage;
342 /* bulk traffic normally dedicates endpoint hardware, and each
343 * direction has its own ring of host side endpoints.
344 * we try to progress the transfer at the head of each endpoint's
345 * queue until it completes or NAKs too much; then we try the next
346 * endpoint.
348 struct musb_hw_ep *bulk_ep;
350 struct list_head control; /* of musb_qh */
351 struct list_head in_bulk; /* of musb_qh */
352 struct list_head out_bulk; /* of musb_qh */
354 struct timer_list otg_timer;
355 struct notifier_block nb;
357 struct dma_controller *dma_controller;
359 struct device *controller;
360 void __iomem *ctrl_base;
361 void __iomem *mregs;
363 #if defined(CONFIG_USB_MUSB_TUSB6010) || \
364 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
365 dma_addr_t async;
366 dma_addr_t sync;
367 void __iomem *sync_va;
368 #endif
370 /* passed down from chip/board specific irq handlers */
371 u8 int_usb;
372 u16 int_rx;
373 u16 int_tx;
375 struct otg_transceiver *xceiv;
376 u8 xceiv_event;
378 int nIrq;
379 unsigned irq_wake:1;
381 struct musb_hw_ep endpoints[MUSB_C_NUM_EPS];
382 #define control_ep endpoints
384 #define VBUSERR_RETRY_COUNT 3
385 u16 vbuserr_retry;
386 u16 epmask;
387 u8 nr_endpoints;
389 u8 board_mode; /* enum musb_mode */
390 int (*board_set_power)(int state);
392 u8 min_power; /* vbus for periph, in mA/2 */
394 bool is_host;
396 int a_wait_bcon; /* VBUS timeout in msecs */
397 unsigned long idle_timeout; /* Next timeout in jiffies */
399 /* active means connected and not suspended */
400 unsigned is_active:1;
402 unsigned is_multipoint:1;
403 unsigned ignore_disconnect:1; /* during bus resets */
405 unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
406 unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
407 unsigned dyn_fifo:1; /* dynamic FIFO supported? */
409 unsigned bulk_split:1;
410 #define can_bulk_split(musb,type) \
411 (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
413 unsigned bulk_combine:1;
414 #define can_bulk_combine(musb,type) \
415 (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
417 /* is_suspended means USB B_PERIPHERAL suspend */
418 unsigned is_suspended:1;
420 /* may_wakeup means remote wakeup is enabled */
421 unsigned may_wakeup:1;
423 /* is_self_powered is reported in device status and the
424 * config descriptor. is_bus_powered means B_PERIPHERAL
425 * draws some VBUS current; both can be true.
427 unsigned is_self_powered:1;
428 unsigned is_bus_powered:1;
430 unsigned set_address:1;
431 unsigned test_mode:1;
432 unsigned softconnect:1;
434 u8 address;
435 u8 test_mode_nr;
436 u16 ackpend; /* ep0 */
437 enum musb_g_ep0_state ep0_state;
438 struct usb_gadget g; /* the gadget */
439 struct usb_gadget_driver *gadget_driver; /* its driver */
442 * FIXME: Remove this flag.
444 * This is only added to allow Blackfin to work
445 * with current driver. For some unknown reason
446 * Blackfin doesn't work with double buffering
447 * and that's enabled by default.
449 * We added this flag to forcefully disable double
450 * buffering until we get it working.
452 unsigned double_buffer_not_ok:1 __deprecated;
454 struct musb_hdrc_config *config;
456 #ifdef MUSB_CONFIG_PROC_FS
457 struct proc_dir_entry *proc_entry;
458 #endif
461 static inline struct musb *gadget_to_musb(struct usb_gadget *g)
463 return container_of(g, struct musb, g);
466 #ifdef CONFIG_BLACKFIN
467 static inline int musb_read_fifosize(struct musb *musb,
468 struct musb_hw_ep *hw_ep, u8 epnum)
470 musb->nr_endpoints++;
471 musb->epmask |= (1 << epnum);
473 if (epnum < 5) {
474 hw_ep->max_packet_sz_tx = 128;
475 hw_ep->max_packet_sz_rx = 128;
476 } else {
477 hw_ep->max_packet_sz_tx = 1024;
478 hw_ep->max_packet_sz_rx = 1024;
480 hw_ep->is_shared_fifo = false;
482 return 0;
485 static inline void musb_configure_ep0(struct musb *musb)
487 musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
488 musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
489 musb->endpoints[0].is_shared_fifo = true;
492 #else
494 static inline int musb_read_fifosize(struct musb *musb,
495 struct musb_hw_ep *hw_ep, u8 epnum)
497 void *mbase = musb->mregs;
498 u8 reg = 0;
500 /* read from core using indexed model */
501 reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
502 /* 0's returned when no more endpoints */
503 if (!reg)
504 return -ENODEV;
506 musb->nr_endpoints++;
507 musb->epmask |= (1 << epnum);
509 hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
511 /* shared TX/RX FIFO? */
512 if ((reg & 0xf0) == 0xf0) {
513 hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
514 hw_ep->is_shared_fifo = true;
515 return 0;
516 } else {
517 hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
518 hw_ep->is_shared_fifo = false;
521 return 0;
524 static inline void musb_configure_ep0(struct musb *musb)
526 musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
527 musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
528 musb->endpoints[0].is_shared_fifo = true;
530 #endif /* CONFIG_BLACKFIN */
533 /***************************** Glue it together *****************************/
535 extern const char musb_driver_name[];
537 extern void musb_start(struct musb *musb);
538 extern void musb_stop(struct musb *musb);
540 extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
541 extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
543 extern void musb_load_testpacket(struct musb *);
545 extern irqreturn_t musb_interrupt(struct musb *);
547 extern void musb_hnp_stop(struct musb *musb);
549 static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
551 if (musb->ops->set_vbus)
552 musb->ops->set_vbus(musb, is_on);
555 static inline void musb_platform_enable(struct musb *musb)
557 if (musb->ops->enable)
558 musb->ops->enable(musb);
561 static inline void musb_platform_disable(struct musb *musb)
563 if (musb->ops->disable)
564 musb->ops->disable(musb);
567 static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
569 if (!musb->ops->set_mode)
570 return 0;
572 return musb->ops->set_mode(musb, mode);
575 static inline void musb_platform_try_idle(struct musb *musb,
576 unsigned long timeout)
578 if (musb->ops->try_idle)
579 musb->ops->try_idle(musb, timeout);
582 static inline int musb_platform_get_vbus_status(struct musb *musb)
584 if (!musb->ops->vbus_status)
585 return 0;
587 return musb->ops->vbus_status(musb);
590 static inline int musb_platform_init(struct musb *musb)
592 if (!musb->ops->init)
593 return -EINVAL;
595 return musb->ops->init(musb);
598 static inline int musb_platform_exit(struct musb *musb)
600 if (!musb->ops->exit)
601 return -EINVAL;
603 return musb->ops->exit(musb);
606 #endif /* __MUSB_CORE_H__ */