i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / usb / serial / usb_wwan.c
blobc88657dd31c88495a65a49f0aff2aca047f89481
1 /*
2 USB Driver layer for GSM modems
4 Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
6 This driver is free software; you can redistribute it and/or modify
7 it under the terms of Version 2 of the GNU General Public License as
8 published by the Free Software Foundation.
10 Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
12 History: see the git log.
14 Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
16 This driver exists because the "normal" serial driver doesn't work too well
17 with GSM modems. Issues:
18 - data loss -- one single Receive URB is not nearly enough
19 - controlling the baud rate doesn't make sense
22 #define DRIVER_VERSION "v0.7.2"
23 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
24 #define DRIVER_DESC "USB Driver for GSM modems"
26 #include <linux/kernel.h>
27 #include <linux/jiffies.h>
28 #include <linux/errno.h>
29 #include <linux/slab.h>
30 #include <linux/tty.h>
31 #include <linux/tty_flip.h>
32 #include <linux/module.h>
33 #include <linux/bitops.h>
34 #include <linux/uaccess.h>
35 #include <linux/usb.h>
36 #include <linux/usb/serial.h>
37 #include <linux/serial.h>
38 #include "usb-wwan.h"
40 static bool debug;
42 void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
44 struct usb_serial *serial = port->serial;
45 struct usb_wwan_port_private *portdata;
47 struct usb_wwan_intf_private *intfdata;
49 dbg("%s", __func__);
51 intfdata = port->serial->private;
53 if (!intfdata->send_setup)
54 return;
56 portdata = usb_get_serial_port_data(port);
57 mutex_lock(&serial->disc_mutex);
58 portdata->rts_state = on;
59 portdata->dtr_state = on;
60 if (serial->dev)
61 intfdata->send_setup(port);
62 mutex_unlock(&serial->disc_mutex);
64 EXPORT_SYMBOL(usb_wwan_dtr_rts);
66 void usb_wwan_set_termios(struct tty_struct *tty,
67 struct usb_serial_port *port,
68 struct ktermios *old_termios)
70 struct usb_wwan_intf_private *intfdata = port->serial->private;
72 dbg("%s", __func__);
74 /* Doesn't support option setting */
75 tty_termios_copy_hw(tty->termios, old_termios);
77 if (intfdata->send_setup)
78 intfdata->send_setup(port);
80 EXPORT_SYMBOL(usb_wwan_set_termios);
82 int usb_wwan_tiocmget(struct tty_struct *tty)
84 struct usb_serial_port *port = tty->driver_data;
85 unsigned int value;
86 struct usb_wwan_port_private *portdata;
88 portdata = usb_get_serial_port_data(port);
90 value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
91 ((portdata->dtr_state) ? TIOCM_DTR : 0) |
92 ((portdata->cts_state) ? TIOCM_CTS : 0) |
93 ((portdata->dsr_state) ? TIOCM_DSR : 0) |
94 ((portdata->dcd_state) ? TIOCM_CAR : 0) |
95 ((portdata->ri_state) ? TIOCM_RNG : 0);
97 return value;
99 EXPORT_SYMBOL(usb_wwan_tiocmget);
101 int usb_wwan_tiocmset(struct tty_struct *tty,
102 unsigned int set, unsigned int clear)
104 struct usb_serial_port *port = tty->driver_data;
105 struct usb_wwan_port_private *portdata;
106 struct usb_wwan_intf_private *intfdata;
108 portdata = usb_get_serial_port_data(port);
109 intfdata = port->serial->private;
111 if (!intfdata->send_setup)
112 return -EINVAL;
114 /* FIXME: what locks portdata fields ? */
115 if (set & TIOCM_RTS)
116 portdata->rts_state = 1;
117 if (set & TIOCM_DTR)
118 portdata->dtr_state = 1;
120 if (clear & TIOCM_RTS)
121 portdata->rts_state = 0;
122 if (clear & TIOCM_DTR)
123 portdata->dtr_state = 0;
124 return intfdata->send_setup(port);
126 EXPORT_SYMBOL(usb_wwan_tiocmset);
128 static int get_serial_info(struct usb_serial_port *port,
129 struct serial_struct __user *retinfo)
131 struct serial_struct tmp;
133 if (!retinfo)
134 return -EFAULT;
136 memset(&tmp, 0, sizeof(tmp));
137 tmp.line = port->serial->minor;
138 tmp.port = port->number;
139 tmp.baud_base = tty_get_baud_rate(port->port.tty);
140 tmp.close_delay = port->port.close_delay / 10;
141 tmp.closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
142 ASYNC_CLOSING_WAIT_NONE :
143 port->port.closing_wait / 10;
145 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
146 return -EFAULT;
147 return 0;
150 static int set_serial_info(struct usb_serial_port *port,
151 struct serial_struct __user *newinfo)
153 struct serial_struct new_serial;
154 unsigned int closing_wait, close_delay;
155 int retval = 0;
157 if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
158 return -EFAULT;
160 close_delay = new_serial.close_delay * 10;
161 closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
162 ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
164 mutex_lock(&port->port.mutex);
166 if (!capable(CAP_SYS_ADMIN)) {
167 if ((close_delay != port->port.close_delay) ||
168 (closing_wait != port->port.closing_wait))
169 retval = -EPERM;
170 else
171 retval = -EOPNOTSUPP;
172 } else {
173 port->port.close_delay = close_delay;
174 port->port.closing_wait = closing_wait;
177 mutex_unlock(&port->port.mutex);
178 return retval;
181 int usb_wwan_ioctl(struct tty_struct *tty,
182 unsigned int cmd, unsigned long arg)
184 struct usb_serial_port *port = tty->driver_data;
186 dbg("%s cmd 0x%04x", __func__, cmd);
188 switch (cmd) {
189 case TIOCGSERIAL:
190 return get_serial_info(port,
191 (struct serial_struct __user *) arg);
192 case TIOCSSERIAL:
193 return set_serial_info(port,
194 (struct serial_struct __user *) arg);
195 default:
196 break;
199 dbg("%s arg not supported", __func__);
201 return -ENOIOCTLCMD;
203 EXPORT_SYMBOL(usb_wwan_ioctl);
205 /* Write */
206 int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
207 const unsigned char *buf, int count)
209 struct usb_wwan_port_private *portdata;
210 struct usb_wwan_intf_private *intfdata;
211 int i;
212 int left, todo;
213 struct urb *this_urb = NULL; /* spurious */
214 int err;
215 unsigned long flags;
217 portdata = usb_get_serial_port_data(port);
218 intfdata = port->serial->private;
220 dbg("%s: write (%d chars)", __func__, count);
222 i = 0;
223 left = count;
224 for (i = 0; left > 0 && i < N_OUT_URB; i++) {
225 todo = left;
226 if (todo > OUT_BUFLEN)
227 todo = OUT_BUFLEN;
229 this_urb = portdata->out_urbs[i];
230 if (test_and_set_bit(i, &portdata->out_busy)) {
231 if (time_before(jiffies,
232 portdata->tx_start_time[i] + 10 * HZ))
233 continue;
234 usb_unlink_urb(this_urb);
235 continue;
237 dbg("%s: endpoint %d buf %d", __func__,
238 usb_pipeendpoint(this_urb->pipe), i);
240 err = usb_autopm_get_interface_async(port->serial->interface);
241 if (err < 0)
242 break;
244 /* send the data */
245 memcpy(this_urb->transfer_buffer, buf, todo);
246 this_urb->transfer_buffer_length = todo;
248 spin_lock_irqsave(&intfdata->susp_lock, flags);
249 if (intfdata->suspended) {
250 usb_anchor_urb(this_urb, &portdata->delayed);
251 spin_unlock_irqrestore(&intfdata->susp_lock, flags);
252 } else {
253 intfdata->in_flight++;
254 spin_unlock_irqrestore(&intfdata->susp_lock, flags);
255 err = usb_submit_urb(this_urb, GFP_ATOMIC);
256 if (err) {
257 dbg("usb_submit_urb %p (write bulk) failed "
258 "(%d)", this_urb, err);
259 clear_bit(i, &portdata->out_busy);
260 spin_lock_irqsave(&intfdata->susp_lock, flags);
261 intfdata->in_flight--;
262 spin_unlock_irqrestore(&intfdata->susp_lock,
263 flags);
264 usb_autopm_put_interface_async(port->serial->interface);
265 break;
269 portdata->tx_start_time[i] = jiffies;
270 buf += todo;
271 left -= todo;
274 count -= left;
275 dbg("%s: wrote (did %d)", __func__, count);
276 return count;
278 EXPORT_SYMBOL(usb_wwan_write);
280 static void usb_wwan_indat_callback(struct urb *urb)
282 int err;
283 int endpoint;
284 struct usb_serial_port *port;
285 struct tty_struct *tty;
286 unsigned char *data = urb->transfer_buffer;
287 int status = urb->status;
289 dbg("%s: %p", __func__, urb);
291 endpoint = usb_pipeendpoint(urb->pipe);
292 port = urb->context;
294 if (status) {
295 dbg("%s: nonzero status: %d on endpoint %02x.",
296 __func__, status, endpoint);
297 } else {
298 tty = tty_port_tty_get(&port->port);
299 if (tty) {
300 if (urb->actual_length) {
301 tty_insert_flip_string(tty, data,
302 urb->actual_length);
303 tty_flip_buffer_push(tty);
304 } else
305 dbg("%s: empty read urb received", __func__);
306 tty_kref_put(tty);
309 /* Resubmit urb so we continue receiving */
310 if (status != -ESHUTDOWN) {
311 err = usb_submit_urb(urb, GFP_ATOMIC);
312 if (err) {
313 if (err != -EPERM) {
314 printk(KERN_ERR "%s: resubmit read urb failed. "
315 "(%d)", __func__, err);
316 /* busy also in error unless we are killed */
317 usb_mark_last_busy(port->serial->dev);
319 } else {
320 usb_mark_last_busy(port->serial->dev);
327 static void usb_wwan_outdat_callback(struct urb *urb)
329 struct usb_serial_port *port;
330 struct usb_wwan_port_private *portdata;
331 struct usb_wwan_intf_private *intfdata;
332 int i;
334 dbg("%s", __func__);
336 port = urb->context;
337 intfdata = port->serial->private;
339 usb_serial_port_softint(port);
340 usb_autopm_put_interface_async(port->serial->interface);
341 portdata = usb_get_serial_port_data(port);
342 spin_lock(&intfdata->susp_lock);
343 intfdata->in_flight--;
344 spin_unlock(&intfdata->susp_lock);
346 for (i = 0; i < N_OUT_URB; ++i) {
347 if (portdata->out_urbs[i] == urb) {
348 smp_mb__before_clear_bit();
349 clear_bit(i, &portdata->out_busy);
350 break;
355 int usb_wwan_write_room(struct tty_struct *tty)
357 struct usb_serial_port *port = tty->driver_data;
358 struct usb_wwan_port_private *portdata;
359 int i;
360 int data_len = 0;
361 struct urb *this_urb;
363 portdata = usb_get_serial_port_data(port);
365 for (i = 0; i < N_OUT_URB; i++) {
366 this_urb = portdata->out_urbs[i];
367 if (this_urb && !test_bit(i, &portdata->out_busy))
368 data_len += OUT_BUFLEN;
371 dbg("%s: %d", __func__, data_len);
372 return data_len;
374 EXPORT_SYMBOL(usb_wwan_write_room);
376 int usb_wwan_chars_in_buffer(struct tty_struct *tty)
378 struct usb_serial_port *port = tty->driver_data;
379 struct usb_wwan_port_private *portdata;
380 int i;
381 int data_len = 0;
382 struct urb *this_urb;
384 portdata = usb_get_serial_port_data(port);
386 for (i = 0; i < N_OUT_URB; i++) {
387 this_urb = portdata->out_urbs[i];
388 /* FIXME: This locking is insufficient as this_urb may
389 go unused during the test */
390 if (this_urb && test_bit(i, &portdata->out_busy))
391 data_len += this_urb->transfer_buffer_length;
393 dbg("%s: %d", __func__, data_len);
394 return data_len;
396 EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
398 int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
400 struct usb_wwan_port_private *portdata;
401 struct usb_wwan_intf_private *intfdata;
402 struct usb_serial *serial = port->serial;
403 int i, err;
404 struct urb *urb;
406 portdata = usb_get_serial_port_data(port);
407 intfdata = serial->private;
409 dbg("%s", __func__);
411 /* Start reading from the IN endpoint */
412 for (i = 0; i < N_IN_URB; i++) {
413 urb = portdata->in_urbs[i];
414 if (!urb)
415 continue;
416 err = usb_submit_urb(urb, GFP_KERNEL);
417 if (err) {
418 dbg("%s: submit urb %d failed (%d) %d",
419 __func__, i, err, urb->transfer_buffer_length);
423 if (intfdata->send_setup)
424 intfdata->send_setup(port);
426 serial->interface->needs_remote_wakeup = 1;
427 spin_lock_irq(&intfdata->susp_lock);
428 portdata->opened = 1;
429 spin_unlock_irq(&intfdata->susp_lock);
430 /* this balances a get in the generic USB serial code */
431 usb_autopm_put_interface(serial->interface);
433 return 0;
435 EXPORT_SYMBOL(usb_wwan_open);
437 void usb_wwan_close(struct usb_serial_port *port)
439 int i;
440 struct usb_serial *serial = port->serial;
441 struct usb_wwan_port_private *portdata;
442 struct usb_wwan_intf_private *intfdata = port->serial->private;
444 dbg("%s", __func__);
445 portdata = usb_get_serial_port_data(port);
447 if (serial->dev) {
448 /* Stop reading/writing urbs */
449 spin_lock_irq(&intfdata->susp_lock);
450 portdata->opened = 0;
451 spin_unlock_irq(&intfdata->susp_lock);
453 for (i = 0; i < N_IN_URB; i++)
454 usb_kill_urb(portdata->in_urbs[i]);
455 for (i = 0; i < N_OUT_URB; i++)
456 usb_kill_urb(portdata->out_urbs[i]);
457 /* balancing - important as an error cannot be handled*/
458 usb_autopm_get_interface_no_resume(serial->interface);
459 serial->interface->needs_remote_wakeup = 0;
462 EXPORT_SYMBOL(usb_wwan_close);
464 /* Helper functions used by usb_wwan_setup_urbs */
465 static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
466 int dir, void *ctx, char *buf, int len,
467 void (*callback) (struct urb *))
469 struct urb *urb;
471 if (endpoint == -1)
472 return NULL; /* endpoint not needed */
474 urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
475 if (urb == NULL) {
476 dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
477 return NULL;
480 /* Fill URB using supplied data. */
481 usb_fill_bulk_urb(urb, serial->dev,
482 usb_sndbulkpipe(serial->dev, endpoint) | dir,
483 buf, len, callback, ctx);
485 return urb;
488 /* Setup urbs */
489 static void usb_wwan_setup_urbs(struct usb_serial *serial)
491 int i, j;
492 struct usb_serial_port *port;
493 struct usb_wwan_port_private *portdata;
495 dbg("%s", __func__);
497 for (i = 0; i < serial->num_ports; i++) {
498 port = serial->port[i];
499 portdata = usb_get_serial_port_data(port);
501 /* Do indat endpoints first */
502 for (j = 0; j < N_IN_URB; ++j) {
503 portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
504 port->
505 bulk_in_endpointAddress,
506 USB_DIR_IN,
507 port,
508 portdata->
509 in_buffer[j],
510 IN_BUFLEN,
511 usb_wwan_indat_callback);
514 /* outdat endpoints */
515 for (j = 0; j < N_OUT_URB; ++j) {
516 portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
517 port->
518 bulk_out_endpointAddress,
519 USB_DIR_OUT,
520 port,
521 portdata->
522 out_buffer
523 [j],
524 OUT_BUFLEN,
525 usb_wwan_outdat_callback);
530 int usb_wwan_startup(struct usb_serial *serial)
532 int i, j, err;
533 struct usb_serial_port *port;
534 struct usb_wwan_port_private *portdata;
535 u8 *buffer;
537 dbg("%s", __func__);
539 /* Now setup per port private data */
540 for (i = 0; i < serial->num_ports; i++) {
541 port = serial->port[i];
542 portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
543 if (!portdata) {
544 dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.",
545 __func__, i);
546 return 1;
548 init_usb_anchor(&portdata->delayed);
550 for (j = 0; j < N_IN_URB; j++) {
551 buffer = (u8 *) __get_free_page(GFP_KERNEL);
552 if (!buffer)
553 goto bail_out_error;
554 portdata->in_buffer[j] = buffer;
557 for (j = 0; j < N_OUT_URB; j++) {
558 buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
559 if (!buffer)
560 goto bail_out_error2;
561 portdata->out_buffer[j] = buffer;
564 usb_set_serial_port_data(port, portdata);
566 if (!port->interrupt_in_urb)
567 continue;
568 err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
569 if (err)
570 dbg("%s: submit irq_in urb failed %d", __func__, err);
572 usb_wwan_setup_urbs(serial);
573 return 0;
575 bail_out_error2:
576 for (j = 0; j < N_OUT_URB; j++)
577 kfree(portdata->out_buffer[j]);
578 bail_out_error:
579 for (j = 0; j < N_IN_URB; j++)
580 if (portdata->in_buffer[j])
581 free_page((unsigned long)portdata->in_buffer[j]);
582 kfree(portdata);
583 return 1;
585 EXPORT_SYMBOL(usb_wwan_startup);
587 static void stop_read_write_urbs(struct usb_serial *serial)
589 int i, j;
590 struct usb_serial_port *port;
591 struct usb_wwan_port_private *portdata;
593 /* Stop reading/writing urbs */
594 for (i = 0; i < serial->num_ports; ++i) {
595 port = serial->port[i];
596 portdata = usb_get_serial_port_data(port);
597 for (j = 0; j < N_IN_URB; j++)
598 usb_kill_urb(portdata->in_urbs[j]);
599 for (j = 0; j < N_OUT_URB; j++)
600 usb_kill_urb(portdata->out_urbs[j]);
604 void usb_wwan_disconnect(struct usb_serial *serial)
606 dbg("%s", __func__);
608 stop_read_write_urbs(serial);
610 EXPORT_SYMBOL(usb_wwan_disconnect);
612 void usb_wwan_release(struct usb_serial *serial)
614 int i, j;
615 struct usb_serial_port *port;
616 struct usb_wwan_port_private *portdata;
618 dbg("%s", __func__);
620 /* Now free them */
621 for (i = 0; i < serial->num_ports; ++i) {
622 port = serial->port[i];
623 portdata = usb_get_serial_port_data(port);
625 for (j = 0; j < N_IN_URB; j++) {
626 usb_free_urb(portdata->in_urbs[j]);
627 free_page((unsigned long)
628 portdata->in_buffer[j]);
629 portdata->in_urbs[j] = NULL;
631 for (j = 0; j < N_OUT_URB; j++) {
632 usb_free_urb(portdata->out_urbs[j]);
633 kfree(portdata->out_buffer[j]);
634 portdata->out_urbs[j] = NULL;
638 /* Now free per port private data */
639 for (i = 0; i < serial->num_ports; i++) {
640 port = serial->port[i];
641 kfree(usb_get_serial_port_data(port));
644 EXPORT_SYMBOL(usb_wwan_release);
646 #ifdef CONFIG_PM
647 int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
649 struct usb_wwan_intf_private *intfdata = serial->private;
650 int b;
652 dbg("%s entered", __func__);
654 if (PMSG_IS_AUTO(message)) {
655 spin_lock_irq(&intfdata->susp_lock);
656 b = intfdata->in_flight;
657 spin_unlock_irq(&intfdata->susp_lock);
659 if (b)
660 return -EBUSY;
663 spin_lock_irq(&intfdata->susp_lock);
664 intfdata->suspended = 1;
665 spin_unlock_irq(&intfdata->susp_lock);
666 stop_read_write_urbs(serial);
668 return 0;
670 EXPORT_SYMBOL(usb_wwan_suspend);
672 static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata)
674 int i;
676 for (i = 0; i < N_OUT_URB; i++) {
677 if (urb == portdata->out_urbs[i]) {
678 clear_bit(i, &portdata->out_busy);
679 break;
684 static void play_delayed(struct usb_serial_port *port)
686 struct usb_wwan_intf_private *data;
687 struct usb_wwan_port_private *portdata;
688 struct urb *urb;
689 int err;
691 portdata = usb_get_serial_port_data(port);
692 data = port->serial->private;
693 while ((urb = usb_get_from_anchor(&portdata->delayed))) {
694 err = usb_submit_urb(urb, GFP_ATOMIC);
695 if (!err) {
696 data->in_flight++;
697 } else {
698 /* we have to throw away the rest */
699 do {
700 unbusy_queued_urb(urb, portdata);
701 usb_autopm_put_interface_no_suspend(port->serial->interface);
702 } while ((urb = usb_get_from_anchor(&portdata->delayed)));
703 break;
708 int usb_wwan_resume(struct usb_serial *serial)
710 int i, j;
711 struct usb_serial_port *port;
712 struct usb_wwan_intf_private *intfdata = serial->private;
713 struct usb_wwan_port_private *portdata;
714 struct urb *urb;
715 int err = 0;
717 dbg("%s entered", __func__);
718 /* get the interrupt URBs resubmitted unconditionally */
719 for (i = 0; i < serial->num_ports; i++) {
720 port = serial->port[i];
721 if (!port->interrupt_in_urb) {
722 dbg("%s: No interrupt URB for port %d", __func__, i);
723 continue;
725 err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
726 dbg("Submitted interrupt URB for port %d (result %d)", i, err);
727 if (err < 0) {
728 err("%s: Error %d for interrupt URB of port%d",
729 __func__, err, i);
730 goto err_out;
734 for (i = 0; i < serial->num_ports; i++) {
735 /* walk all ports */
736 port = serial->port[i];
737 portdata = usb_get_serial_port_data(port);
739 /* skip closed ports */
740 spin_lock_irq(&intfdata->susp_lock);
741 if (!portdata->opened) {
742 spin_unlock_irq(&intfdata->susp_lock);
743 continue;
746 for (j = 0; j < N_IN_URB; j++) {
747 urb = portdata->in_urbs[j];
748 err = usb_submit_urb(urb, GFP_ATOMIC);
749 if (err < 0) {
750 err("%s: Error %d for bulk URB %d",
751 __func__, err, i);
752 spin_unlock_irq(&intfdata->susp_lock);
753 goto err_out;
756 play_delayed(port);
757 spin_unlock_irq(&intfdata->susp_lock);
759 spin_lock_irq(&intfdata->susp_lock);
760 intfdata->suspended = 0;
761 spin_unlock_irq(&intfdata->susp_lock);
762 err_out:
763 return err;
765 EXPORT_SYMBOL(usb_wwan_resume);
766 #endif
768 MODULE_AUTHOR(DRIVER_AUTHOR);
769 MODULE_DESCRIPTION(DRIVER_DESC);
770 MODULE_VERSION(DRIVER_VERSION);
771 MODULE_LICENSE("GPL");
773 module_param(debug, bool, S_IRUGO | S_IWUSR);
774 MODULE_PARM_DESC(debug, "Debug messages");