drivers/hid/hid-wacom.c

   1 /*
   2  *  Bluetooth Wacom Tablet support
   3  *
   4  *  Copyright (c) 1999 Andreas Gal
   5  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
   6  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
   7  *  Copyright (c) 2006-2007 Jiri Kosina
   8  *  Copyright (c) 2007 Paul Walmsley
   9  *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
  10  *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
  11  *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
  12  */
  13
  14 /*
  15  * This program is free software; you can redistribute it and/or modify it
  16  * under the terms of the GNU General Public License as published by the Free
  17  * Software Foundation; either version 2 of the License, or (at your option)
  18  * any later version.
  19  */
  20
  21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  22
  23 #include <linux/device.h>
  24 #include <linux/hid.h>
  25 #include <linux/module.h>
  26 #include <linux/slab.h>
  27 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  28 #include <linux/power_supply.h>
  29 #endif
  30
  31 #include "hid-ids.h"
  32
  33 struct wacom_data {
  34         __u16 tool;
  35         unsigned char butstate;
  36         unsigned char high_speed;
  37 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  38         int battery_capacity;
  39         struct power_supply battery;
  40         struct power_supply ac;
  41 #endif
  42 };
  43
  44 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  45 /*percent of battery capacity, 0 means AC online*/
  46 static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 };
  47
  48 static enum power_supply_property wacom_battery_props[] = {
  49         POWER_SUPPLY_PROP_PRESENT,
  50         POWER_SUPPLY_PROP_CAPACITY
  51 };
  52
  53 static enum power_supply_property wacom_ac_props[] = {
  54         POWER_SUPPLY_PROP_PRESENT,
  55         POWER_SUPPLY_PROP_ONLINE
  56 };
  57
  58 static int wacom_battery_get_property(struct power_supply *psy,
  59                                 enum power_supply_property psp,
  60                                 union power_supply_propval *val)
  61 {
  62         struct wacom_data *wdata = container_of(psy,
  63                                         struct wacom_data, battery);
  64         int power_state = batcap[wdata->battery_capacity];
  65         int ret = 0;
  66
  67         switch (psp) {
  68         case POWER_SUPPLY_PROP_PRESENT:
  69                 val->intval = 1;
  70                 break;
  71         case POWER_SUPPLY_PROP_CAPACITY:
  72                 /* show 100% battery capacity when charging */
  73                 if (power_state == 0)
  74                         val->intval = 100;
  75                 else
  76                         val->intval = power_state;
  77                 break;
  78         default:
  79                 ret = -EINVAL;
  80                 break;
  81         }
  82         return ret;
  83 }
  84
  85 static int wacom_ac_get_property(struct power_supply *psy,
  86                                 enum power_supply_property psp,
  87                                 union power_supply_propval *val)
  88 {
  89         struct wacom_data *wdata = container_of(psy, struct wacom_data, ac);
  90         int power_state = batcap[wdata->battery_capacity];
  91         int ret = 0;
  92
  93         switch (psp) {
  94         case POWER_SUPPLY_PROP_PRESENT:
  95                 /* fall through */
  96         case POWER_SUPPLY_PROP_ONLINE:
  97                 if (power_state == 0)
  98                         val->intval = 1;
  99                 else
 100                         val->intval = 0;
 101                 break;
 102         default:
 103                 ret = -EINVAL;
 104                 break;
 105         }
 106         return ret;
 107 }
 108 #endif
 109
 110 static void wacom_poke(struct hid_device *hdev, u8 speed)
 111 {
 112         struct wacom_data *wdata = hid_get_drvdata(hdev);
 113         int limit, ret;
 114         char rep_data[2];
 115
 116         rep_data[0] = 0x03 ; rep_data[1] = 0x00;
 117         limit = 3;
 118         do {
 119                 ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
 120                                 HID_FEATURE_REPORT);
 121         } while (ret < 0 && limit-- > 0);
 122
 123         if (ret >= 0) {
 124                 if (speed == 0)
 125                         rep_data[0] = 0x05;
 126                 else
 127                         rep_data[0] = 0x06;
 128
 129                 rep_data[1] = 0x00;
 130                 limit = 3;
 131                 do {
 132                         ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
 133                                         HID_FEATURE_REPORT);
 134                 } while (ret < 0 && limit-- > 0);
 135
 136                 if (ret >= 0) {
 137                         wdata->high_speed = speed;
 138                         return;
 139                 }
 140         }
 141
 142         /*
 143          * Note that if the raw queries fail, it's not a hard failure and it
 144          * is safe to continue
 145          */
 146         hid_warn(hdev, "failed to poke device, command %d, err %d\n",
 147                  rep_data[0], ret);
 148         return;
 149 }
 150
 151 static ssize_t wacom_show_speed(struct device *dev,
 152                                 struct device_attribute
 153                                 *attr, char *buf)
 154 {
 155         struct wacom_data *wdata = dev_get_drvdata(dev);
 156
 157         return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed);
 158 }
 159
 160 static ssize_t wacom_store_speed(struct device *dev,
 161                                 struct device_attribute *attr,
 162                                 const char *buf, size_t count)
 163 {
 164         struct hid_device *hdev = container_of(dev, struct hid_device, dev);
 165         int new_speed;
 166
 167         if (sscanf(buf, "%1d", &new_speed ) != 1)
 168                 return -EINVAL;
 169
 170         if (new_speed == 0 || new_speed == 1) {
 171                 wacom_poke(hdev, new_speed);
 172                 return strnlen(buf, PAGE_SIZE);
 173         } else
 174                 return -EINVAL;
 175 }
 176
 177 static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP,
 178                 wacom_show_speed, wacom_store_speed);
 179
 180 static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 181                 u8 *raw_data, int size)
 182 {
 183         struct wacom_data *wdata = hid_get_drvdata(hdev);
 184         struct hid_input *hidinput;
 185         struct input_dev *input;
 186         unsigned char *data = (unsigned char *) raw_data;
 187         int tool, x, y, rw;
 188
 189         if (!(hdev->claimed & HID_CLAIMED_INPUT))
 190                 return 0;
 191
 192         tool = 0;
 193         hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 194         input = hidinput->input;
 195
 196         /* Check if this is a tablet report */
 197         if (data[0] != 0x03)
 198                 return 0;
 199
 200         /* Get X & Y positions */
 201         x = le16_to_cpu(*(__le16 *) &data[2]);
 202         y = le16_to_cpu(*(__le16 *) &data[4]);
 203
 204         /* Get current tool identifier */
 205         if (data[1] & 0x90) { /* If pen is in the in/active area */
 206                 switch ((data[1] >> 5) & 3) {
 207                 case 0: /* Pen */
 208                         tool = BTN_TOOL_PEN;
 209                         break;
 210
 211                 case 1: /* Rubber */
 212                         tool = BTN_TOOL_RUBBER;
 213                         break;
 214
 215                 case 2: /* Mouse with wheel */
 216                 case 3: /* Mouse without wheel */
 217                         tool = BTN_TOOL_MOUSE;
 218                         break;
 219                 }
 220
 221                 /* Reset tool if out of active tablet area */
 222                 if (!(data[1] & 0x10))
 223                         tool = 0;
 224         }
 225
 226         /* If tool changed, notify input subsystem */
 227         if (wdata->tool != tool) {
 228                 if (wdata->tool) {
 229                         /* Completely reset old tool state */
 230                         if (wdata->tool == BTN_TOOL_MOUSE) {
 231                                 input_report_key(input, BTN_LEFT, 0);
 232                                 input_report_key(input, BTN_RIGHT, 0);
 233                                 input_report_key(input, BTN_MIDDLE, 0);
 234                                 input_report_abs(input, ABS_DISTANCE,
 235                                         input_abs_get_max(input, ABS_DISTANCE));
 236                         } else {
 237                                 input_report_key(input, BTN_TOUCH, 0);
 238                                 input_report_key(input, BTN_STYLUS, 0);
 239                                 input_report_key(input, BTN_STYLUS2, 0);
 240                                 input_report_abs(input, ABS_PRESSURE, 0);
 241                         }
 242                         input_report_key(input, wdata->tool, 0);
 243                         input_sync(input);
 244                 }
 245                 wdata->tool = tool;
 246                 if (tool)
 247                         input_report_key(input, tool, 1);
 248         }
 249
 250         if (tool) {
 251                 input_report_abs(input, ABS_X, x);
 252                 input_report_abs(input, ABS_Y, y);
 253
 254                 switch ((data[1] >> 5) & 3) {
 255                 case 2: /* Mouse with wheel */
 256                         input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
 257                         rw = (data[6] & 0x01) ? -1 :
 258                                 (data[6] & 0x02) ? 1 : 0;
 259                         input_report_rel(input, REL_WHEEL, rw);
 260                         /* fall through */
 261
 262                 case 3: /* Mouse without wheel */
 263                         input_report_key(input, BTN_LEFT, data[1] & 0x01);
 264                         input_report_key(input, BTN_RIGHT, data[1] & 0x02);
 265                         /* Compute distance between mouse and tablet */
 266                         rw = 44 - (data[6] >> 2);
 267                         if (rw < 0)
 268                                 rw = 0;
 269                         else if (rw > 31)
 270                                 rw = 31;
 271                         input_report_abs(input, ABS_DISTANCE, rw);
 272                         break;
 273
 274                 default:
 275                         input_report_abs(input, ABS_PRESSURE,
 276                                         data[6] | (((__u16) (data[1] & 0x08)) << 5));
 277                         input_report_key(input, BTN_TOUCH, data[1] & 0x01);
 278                         input_report_key(input, BTN_STYLUS, data[1] & 0x02);
 279                         input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
 280                         break;
 281                 }
 282
 283                 input_sync(input);
 284         }
 285
 286         /* Report the state of the two buttons at the top of the tablet
 287          * as two extra fingerpad keys (buttons 4 & 5). */
 288         rw = data[7] & 0x03;
 289         if (rw != wdata->butstate) {
 290                 wdata->butstate = rw;
 291                 input_report_key(input, BTN_0, rw & 0x02);
 292                 input_report_key(input, BTN_1, rw & 0x01);
 293                 input_report_key(input, BTN_TOOL_FINGER, 0xf0);
 294                 input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
 295                 input_sync(input);
 296         }
 297
 298 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 299         /* Store current battery capacity */
 300         rw = (data[7] >> 2 & 0x07);
 301         if (rw != wdata->battery_capacity)
 302                 wdata->battery_capacity = rw;
 303 #endif
 304         return 1;
 305 }
 306
 307 static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 308         struct hid_field *field, struct hid_usage *usage, unsigned long **bit,
 309                                                                 int *max)
 310 {
 311         struct input_dev *input = hi->input;
 312
 313         __set_bit(INPUT_PROP_POINTER, input->propbit);
 314
 315         /* Basics */
 316         input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
 317
 318         __set_bit(REL_WHEEL, input->relbit);
 319
 320         __set_bit(BTN_TOOL_PEN, input->keybit);
 321         __set_bit(BTN_TOUCH, input->keybit);
 322         __set_bit(BTN_STYLUS, input->keybit);
 323         __set_bit(BTN_STYLUS2, input->keybit);
 324         __set_bit(BTN_LEFT, input->keybit);
 325         __set_bit(BTN_RIGHT, input->keybit);
 326         __set_bit(BTN_MIDDLE, input->keybit);
 327
 328         /* Pad */
 329         input->evbit[0] |= BIT(EV_MSC);
 330
 331         __set_bit(MSC_SERIAL, input->mscbit);
 332
 333         __set_bit(BTN_0, input->keybit);
 334         __set_bit(BTN_1, input->keybit);
 335         __set_bit(BTN_TOOL_FINGER, input->keybit);
 336
 337         /* Distance, rubber and mouse */
 338         __set_bit(BTN_TOOL_RUBBER, input->keybit);
 339         __set_bit(BTN_TOOL_MOUSE, input->keybit);
 340
 341         input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
 342         input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
 343         input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
 344         input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
 345
 346         return 0;
 347 }
 348
 349 static int wacom_probe(struct hid_device *hdev,
 350                 const struct hid_device_id *id)
 351 {
 352         struct wacom_data *wdata;
 353         int ret;
 354
 355         wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
 356         if (wdata == NULL) {
 357                 hid_err(hdev, "can't alloc wacom descriptor\n");
 358                 return -ENOMEM;
 359         }
 360
 361         hid_set_drvdata(hdev, wdata);
 362
 363         /* Parse the HID report now */
 364         ret = hid_parse(hdev);
 365         if (ret) {
 366                 hid_err(hdev, "parse failed\n");
 367                 goto err_free;
 368         }
 369
 370         ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 371         if (ret) {
 372                 hid_err(hdev, "hw start failed\n");
 373                 goto err_free;
 374         }
 375
 376         ret = device_create_file(&hdev->dev, &dev_attr_speed);
 377         if (ret)
 378                 hid_warn(hdev,
 379                          "can't create sysfs speed attribute err: %d\n", ret);
 380
 381         /* Set Wacom mode 2 with high reporting speed */
 382         wacom_poke(hdev, 1);
 383
 384 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 385         wdata->battery.properties = wacom_battery_props;
 386         wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
 387         wdata->battery.get_property = wacom_battery_get_property;
 388         wdata->battery.name = "wacom_battery";
 389         wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
 390         wdata->battery.use_for_apm = 0;
 391
 392         ret = power_supply_register(&hdev->dev, &wdata->battery);
 393         if (ret) {
 394                 hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n",
 395                          ret);
 396                 goto err_battery;
 397         }
 398
 399         wdata->ac.properties = wacom_ac_props;
 400         wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
 401         wdata->ac.get_property = wacom_ac_get_property;
 402         wdata->ac.name = "wacom_ac";
 403         wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
 404         wdata->ac.use_for_apm = 0;
 405
 406         ret = power_supply_register(&hdev->dev, &wdata->ac);
 407         if (ret) {
 408                 hid_warn(hdev,
 409                          "can't create ac battery attribute, err: %d\n", ret);
 410                 goto err_ac;
 411         }
 412 #endif
 413         return 0;
 414
 415 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 416 err_ac:
 417         power_supply_unregister(&wdata->battery);
 418 err_battery:
 419         device_remove_file(&hdev->dev, &dev_attr_speed);
 420         hid_hw_stop(hdev);
 421 #endif
 422 err_free:
 423         kfree(wdata);
 424         return ret;
 425 }
 426
 427 static void wacom_remove(struct hid_device *hdev)
 428 {
 429 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 430         struct wacom_data *wdata = hid_get_drvdata(hdev);
 431 #endif
 432         device_remove_file(&hdev->dev, &dev_attr_speed);
 433         hid_hw_stop(hdev);
 434
 435 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 436         power_supply_unregister(&wdata->battery);
 437         power_supply_unregister(&wdata->ac);
 438 #endif
 439         kfree(hid_get_drvdata(hdev));
 440 }
 441
 442 static const struct hid_device_id wacom_devices[] = {
 443         { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
 444
 445         { }
 446 };
 447 MODULE_DEVICE_TABLE(hid, wacom_devices);
 448
 449 static struct hid_driver wacom_driver = {
 450         .name = "wacom",
 451         .id_table = wacom_devices,
 452         .probe = wacom_probe,
 453         .remove = wacom_remove,
 454         .raw_event = wacom_raw_event,
 455         .input_mapped = wacom_input_mapped,
 456 };
 457
 458 static int __init wacom_init(void)
 459 {
 460         int ret;
 461
 462         ret = hid_register_driver(&wacom_driver);
 463         if (ret)
 464                 pr_err("can't register wacom driver\n");
 465         return ret;
 466 }
 467
 468 static void __exit wacom_exit(void)
 469 {
 470         hid_unregister_driver(&wacom_driver);
 471 }
 472
 473 module_init(wacom_init);
 474 module_exit(wacom_exit);
 475 MODULE_LICENSE("GPL");
 476