?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
usb: Netlogic: Use CPU_XLR in place of NLM_XLR
[zen-stable.git] / drivers / net / ethernet / marvell / sky2.c
blobfdc6c394c683ed64e9ecd456427e742d0f101bcd
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26
27 #include <linux/crc32.h>
28 #include <linux/kernel.h>
29 #include <linux/module.h>
30 #include <linux/netdevice.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/etherdevice.h>
33 #include <linux/ethtool.h>
34 #include <linux/pci.h>
35 #include <linux/interrupt.h>
36 #include <linux/ip.h>
37 #include <linux/slab.h>
38 #include <net/ip.h>
39 #include <linux/tcp.h>
40 #include <linux/in.h>
41 #include <linux/delay.h>
42 #include <linux/workqueue.h>
43 #include <linux/if_vlan.h>
44 #include <linux/prefetch.h>
45 #include <linux/debugfs.h>
46 #include <linux/mii.h>
47
48 #include <asm/irq.h>
49
50 #include "sky2.h"
51
52 #define DRV_NAME "sky2"
53 #define DRV_VERSION "1.29"
54
55 /*
56 * The Yukon II chipset takes 64 bit command blocks (called list elements)
57 * that are organized into three (receive, transmit, status) different rings
58 * similar to Tigon3.
59 */
60
61 #define RX_LE_SIZE 1024
62 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
63 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
64 #define RX_DEF_PENDING RX_MAX_PENDING
65
66 /* This is the worst case number of transmit list elements for a single skb:
67 VLAN:GSO + CKSUM + Data + skb_frags * DMA */
68 #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
69 #define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
70 #define TX_MAX_PENDING 1024
71 #define TX_DEF_PENDING 127
72
73 #define TX_WATCHDOG (5 * HZ)
74 #define NAPI_WEIGHT 64
75 #define PHY_RETRIES 1000
76
77 #define SKY2_EEPROM_MAGIC 0x9955aabb
78
79 #define RING_NEXT(x, s) (((x)+1) & ((s)-1))
80
81 static const u32 default_msg =
82 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
83 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
84 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
85
86 static int debug = -1; /* defaults above */
87 module_param(debug, int, 0);
88 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
89
90 static int copybreak __read_mostly = 128;
91 module_param(copybreak, int, 0);
92 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
93
94 static int disable_msi = 0;
95 module_param(disable_msi, int, 0);
96 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
97
98 static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
99 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
100 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
101 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
102 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
103 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
104 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
105 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
106 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
107 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
108 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
133 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
134 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
135 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
136 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
137 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
138 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
139 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
140 { 0 }
141 };
142
143 MODULE_DEVICE_TABLE(pci, sky2_id_table);
144
145 /* Avoid conditionals by using array */
146 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
147 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
148 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
149
150 static void sky2_set_multicast(struct net_device *dev);
151 static irqreturn_t sky2_intr(int irq, void *dev_id);
152
153 /* Access to PHY via serial interconnect */
154 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
155 {
156 int i;
157
158 gma_write16(hw, port, GM_SMI_DATA, val);
159 gma_write16(hw, port, GM_SMI_CTRL,
160 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
161
162 for (i = 0; i < PHY_RETRIES; i++) {
163 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
164 if (ctrl == 0xffff)
165 goto io_error;
166
167 if (!(ctrl & GM_SMI_CT_BUSY))
168 return 0;
169
170 udelay(10);
171 }
172
173 dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name);
174 return -ETIMEDOUT;
175
176 io_error:
177 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
178 return -EIO;
179 }
180
181 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
182 {
183 int i;
184
185 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
186 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
187
188 for (i = 0; i < PHY_RETRIES; i++) {
189 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
190 if (ctrl == 0xffff)
191 goto io_error;
192
193 if (ctrl & GM_SMI_CT_RD_VAL) {
194 *val = gma_read16(hw, port, GM_SMI_DATA);
195 return 0;
196 }
197
198 udelay(10);
199 }
200
201 dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
202 return -ETIMEDOUT;
203 io_error:
204 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
205 return -EIO;
206 }
207
208 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
209 {
210 u16 v;
211 __gm_phy_read(hw, port, reg, &v);
212 return v;
213 }
214
215
216 static void sky2_power_on(struct sky2_hw *hw)
217 {
218 /* switch power to VCC (WA for VAUX problem) */
219 sky2_write8(hw, B0_POWER_CTRL,
220 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
221
222 /* disable Core Clock Division, */
223 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
224
225 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
226 /* enable bits are inverted */
227 sky2_write8(hw, B2_Y2_CLK_GATE,
228 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
229 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
230 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
231 else
232 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
233
234 if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
235 u32 reg;
236
237 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
238
239 reg = sky2_pci_read32(hw, PCI_DEV_REG4);
240 /* set all bits to 0 except bits 15..12 and 8 */
241 reg &= P_ASPM_CONTROL_MSK;
242 sky2_pci_write32(hw, PCI_DEV_REG4, reg);
243
244 reg = sky2_pci_read32(hw, PCI_DEV_REG5);
245 /* set all bits to 0 except bits 28 & 27 */
246 reg &= P_CTL_TIM_VMAIN_AV_MSK;
247 sky2_pci_write32(hw, PCI_DEV_REG5, reg);
248
249 sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
250
251 sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
252
253 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
254 reg = sky2_read32(hw, B2_GP_IO);
255 reg |= GLB_GPIO_STAT_RACE_DIS;
256 sky2_write32(hw, B2_GP_IO, reg);
257
258 sky2_read32(hw, B2_GP_IO);
259 }
260
261 /* Turn on "driver loaded" LED */
262 sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
263 }
264
265 static void sky2_power_aux(struct sky2_hw *hw)
266 {
267 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
268 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
269 else
270 /* enable bits are inverted */
271 sky2_write8(hw, B2_Y2_CLK_GATE,
272 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
273 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
274 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
275
276 /* switch power to VAUX if supported and PME from D3cold */
277 if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
278 pci_pme_capable(hw->pdev, PCI_D3cold))
279 sky2_write8(hw, B0_POWER_CTRL,
280 (PC_VAUX_ENA | PC_VCC_ENA |
281 PC_VAUX_ON | PC_VCC_OFF));
282
283 /* turn off "driver loaded LED" */
284 sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
285 }
286
287 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
288 {
289 u16 reg;
290
291 /* disable all GMAC IRQ's */
292 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
293
294 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
295 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
296 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
297 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
298
299 reg = gma_read16(hw, port, GM_RX_CTRL);
300 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
301 gma_write16(hw, port, GM_RX_CTRL, reg);
302 }
303
304 /* flow control to advertise bits */
305 static const u16 copper_fc_adv[] = {
306 [FC_NONE] = 0,
307 [FC_TX] = PHY_M_AN_ASP,
308 [FC_RX] = PHY_M_AN_PC,
309 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
310 };
311
312 /* flow control to advertise bits when using 1000BaseX */
313 static const u16 fiber_fc_adv[] = {
314 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
315 [FC_TX] = PHY_M_P_ASYM_MD_X,
316 [FC_RX] = PHY_M_P_SYM_MD_X,
317 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
318 };
319
320 /* flow control to GMA disable bits */
321 static const u16 gm_fc_disable[] = {
322 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
323 [FC_TX] = GM_GPCR_FC_RX_DIS,
324 [FC_RX] = GM_GPCR_FC_TX_DIS,
325 [FC_BOTH] = 0,
326 };
327
328
329 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
330 {
331 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
332 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
333
334 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
335 !(hw->flags & SKY2_HW_NEWER_PHY)) {
336 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
337
338 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
339 PHY_M_EC_MAC_S_MSK);
340 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
341
342 /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
343 if (hw->chip_id == CHIP_ID_YUKON_EC)
344 /* set downshift counter to 3x and enable downshift */
345 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
346 else
347 /* set master & slave downshift counter to 1x */
348 ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
349
350 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
351 }
352
353 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
354 if (sky2_is_copper(hw)) {
355 if (!(hw->flags & SKY2_HW_GIGABIT)) {
356 /* enable automatic crossover */
357 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
358
359 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
360 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
361 u16 spec;
362
363 /* Enable Class A driver for FE+ A0 */
364 spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
365 spec |= PHY_M_FESC_SEL_CL_A;
366 gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
367 }
368 } else {
369 /* disable energy detect */
370 ctrl &= ~PHY_M_PC_EN_DET_MSK;
371
372 /* enable automatic crossover */
373 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
374
375 /* downshift on PHY 88E1112 and 88E1149 is changed */
376 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
377 (hw->flags & SKY2_HW_NEWER_PHY)) {
378 /* set downshift counter to 3x and enable downshift */
379 ctrl &= ~PHY_M_PC_DSC_MSK;
380 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
381 }
382 }
383 } else {
384 /* workaround for deviation #4.88 (CRC errors) */
385 /* disable Automatic Crossover */
386
387 ctrl &= ~PHY_M_PC_MDIX_MSK;
388 }
389
390 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
391
392 /* special setup for PHY 88E1112 Fiber */
393 if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
394 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
395
396 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
397 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
398 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
399 ctrl &= ~PHY_M_MAC_MD_MSK;
400 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
401 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
402
403 if (hw->pmd_type == 'P') {
404 /* select page 1 to access Fiber registers */
405 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
406
407 /* for SFP-module set SIGDET polarity to low */
408 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
409 ctrl |= PHY_M_FIB_SIGD_POL;
410 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
411 }
412
413 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
414 }
415
416 ctrl = PHY_CT_RESET;
417 ct1000 = 0;
418 adv = PHY_AN_CSMA;
419 reg = 0;
420
421 if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
422 if (sky2_is_copper(hw)) {
423 if (sky2->advertising & ADVERTISED_1000baseT_Full)
424 ct1000 |= PHY_M_1000C_AFD;
425 if (sky2->advertising & ADVERTISED_1000baseT_Half)
426 ct1000 |= PHY_M_1000C_AHD;
427 if (sky2->advertising & ADVERTISED_100baseT_Full)
428 adv |= PHY_M_AN_100_FD;
429 if (sky2->advertising & ADVERTISED_100baseT_Half)
430 adv |= PHY_M_AN_100_HD;
431 if (sky2->advertising & ADVERTISED_10baseT_Full)
432 adv |= PHY_M_AN_10_FD;
433 if (sky2->advertising & ADVERTISED_10baseT_Half)
434 adv |= PHY_M_AN_10_HD;
435
436 } else { /* special defines for FIBER (88E1040S only) */
437 if (sky2->advertising & ADVERTISED_1000baseT_Full)
438 adv |= PHY_M_AN_1000X_AFD;
439 if (sky2->advertising & ADVERTISED_1000baseT_Half)
440 adv |= PHY_M_AN_1000X_AHD;
441 }
442
443 /* Restart Auto-negotiation */
444 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
445 } else {
446 /* forced speed/duplex settings */
447 ct1000 = PHY_M_1000C_MSE;
448
449 /* Disable auto update for duplex flow control and duplex */
450 reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
451
452 switch (sky2->speed) {
453 case SPEED_1000:
454 ctrl |= PHY_CT_SP1000;
455 reg |= GM_GPCR_SPEED_1000;
456 break;
457 case SPEED_100:
458 ctrl |= PHY_CT_SP100;
459 reg |= GM_GPCR_SPEED_100;
460 break;
461 }
462
463 if (sky2->duplex == DUPLEX_FULL) {
464 reg |= GM_GPCR_DUP_FULL;
465 ctrl |= PHY_CT_DUP_MD;
466 } else if (sky2->speed < SPEED_1000)
467 sky2->flow_mode = FC_NONE;
468 }
469
470 if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
471 if (sky2_is_copper(hw))
472 adv |= copper_fc_adv[sky2->flow_mode];
473 else
474 adv |= fiber_fc_adv[sky2->flow_mode];
475 } else {
476 reg |= GM_GPCR_AU_FCT_DIS;
477 reg |= gm_fc_disable[sky2->flow_mode];
478
479 /* Forward pause packets to GMAC? */
480 if (sky2->flow_mode & FC_RX)
481 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
482 else
483 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
484 }
485
486 gma_write16(hw, port, GM_GP_CTRL, reg);
487
488 if (hw->flags & SKY2_HW_GIGABIT)
489 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
490
491 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
492 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
493
494 /* Setup Phy LED's */
495 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
496 ledover = 0;
497
498 switch (hw->chip_id) {
499 case CHIP_ID_YUKON_FE:
500 /* on 88E3082 these bits are at 11..9 (shifted left) */
501 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
502
503 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
504
505 /* delete ACT LED control bits */
506 ctrl &= ~PHY_M_FELP_LED1_MSK;
507 /* change ACT LED control to blink mode */
508 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
509 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
510 break;
511
512 case CHIP_ID_YUKON_FE_P:
513 /* Enable Link Partner Next Page */
514 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
515 ctrl |= PHY_M_PC_ENA_LIP_NP;
516
517 /* disable Energy Detect and enable scrambler */
518 ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
519 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
520
521 /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
522 ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
523 PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
524 PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
525
526 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
527 break;
528
529 case CHIP_ID_YUKON_XL:
530 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
531
532 /* select page 3 to access LED control register */
533 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
534
535 /* set LED Function Control register */
536 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
537 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
538 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
539 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
540 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
541
542 /* set Polarity Control register */
543 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
544 (PHY_M_POLC_LS1_P_MIX(4) |
545 PHY_M_POLC_IS0_P_MIX(4) |
546 PHY_M_POLC_LOS_CTRL(2) |
547 PHY_M_POLC_INIT_CTRL(2) |
548 PHY_M_POLC_STA1_CTRL(2) |
549 PHY_M_POLC_STA0_CTRL(2)));
550
551 /* restore page register */
552 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
553 break;
554
555 case CHIP_ID_YUKON_EC_U:
556 case CHIP_ID_YUKON_EX:
557 case CHIP_ID_YUKON_SUPR:
558 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
559
560 /* select page 3 to access LED control register */
561 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
562
563 /* set LED Function Control register */
564 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
565 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
566 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
567 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
568 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
569
570 /* set Blink Rate in LED Timer Control Register */
571 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
572 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
573 /* restore page register */
574 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
575 break;
576
577 default:
578 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
579 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
580
581 /* turn off the Rx LED (LED_RX) */
582 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
583 }
584
585 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
586 /* apply fixes in PHY AFE */
587 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
588
589 /* increase differential signal amplitude in 10BASE-T */
590 gm_phy_write(hw, port, 0x18, 0xaa99);
591 gm_phy_write(hw, port, 0x17, 0x2011);
592
593 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
594 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
595 gm_phy_write(hw, port, 0x18, 0xa204);
596 gm_phy_write(hw, port, 0x17, 0x2002);
597 }
598
599 /* set page register to 0 */
600 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
601 } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
602 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
603 /* apply workaround for integrated resistors calibration */
604 gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
605 gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
606 } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
607 /* apply fixes in PHY AFE */
608 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
609
610 /* apply RDAC termination workaround */
611 gm_phy_write(hw, port, 24, 0x2800);
612 gm_phy_write(hw, port, 23, 0x2001);
613
614 /* set page register back to 0 */
615 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
616 } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
617 hw->chip_id < CHIP_ID_YUKON_SUPR) {
618 /* no effect on Yukon-XL */
619 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
620
621 if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
622 sky2->speed == SPEED_100) {
623 /* turn on 100 Mbps LED (LED_LINK100) */
624 ledover |= PHY_M_LED_MO_100(MO_LED_ON);
625 }
626
627 if (ledover)
628 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
629
630 } else if (hw->chip_id == CHIP_ID_YUKON_PRM &&
631 (sky2_read8(hw, B2_MAC_CFG) & 0xf) == 0x7) {
632 int i;
633 /* This a phy register setup workaround copied from vendor driver. */
634 static const struct {
635 u16 reg, val;
636 } eee_afe[] = {
637 { 0x156, 0x58ce },
638 { 0x153, 0x99eb },
639 { 0x141, 0x8064 },
640 /* { 0x155, 0x130b },*/
641 { 0x000, 0x0000 },
642 { 0x151, 0x8433 },
643 { 0x14b, 0x8c44 },
644 { 0x14c, 0x0f90 },
645 { 0x14f, 0x39aa },
646 /* { 0x154, 0x2f39 },*/
647 { 0x14d, 0xba33 },
648 { 0x144, 0x0048 },
649 { 0x152, 0x2010 },
650 /* { 0x158, 0x1223 },*/
651 { 0x140, 0x4444 },
652 { 0x154, 0x2f3b },
653 { 0x158, 0xb203 },
654 { 0x157, 0x2029 },
655 };
656
657 /* Start Workaround for OptimaEEE Rev.Z0 */
658 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fb);
659
660 gm_phy_write(hw, port, 1, 0x4099);
661 gm_phy_write(hw, port, 3, 0x1120);
662 gm_phy_write(hw, port, 11, 0x113c);
663 gm_phy_write(hw, port, 14, 0x8100);
664 gm_phy_write(hw, port, 15, 0x112a);
665 gm_phy_write(hw, port, 17, 0x1008);
666
667 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fc);
668 gm_phy_write(hw, port, 1, 0x20b0);
669
670 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
671
672 for (i = 0; i < ARRAY_SIZE(eee_afe); i++) {
673 /* apply AFE settings */
674 gm_phy_write(hw, port, 17, eee_afe[i].val);
675 gm_phy_write(hw, port, 16, eee_afe[i].reg | 1u<<13);
676 }
677
678 /* End Workaround for OptimaEEE */
679 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
680
681 /* Enable 10Base-Te (EEE) */
682 if (hw->chip_id >= CHIP_ID_YUKON_PRM) {
683 reg = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
684 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL,
685 reg | PHY_M_10B_TE_ENABLE);
686 }
687 }
688
689 /* Enable phy interrupt on auto-negotiation complete (or link up) */
690 if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
691 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
692 else
693 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
694 }
695
696 static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
697 static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
698
699 static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
700 {
701 u32 reg1;
702
703 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
704 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
705 reg1 &= ~phy_power[port];
706
707 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
708 reg1 |= coma_mode[port];
709
710 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
711 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
712 sky2_pci_read32(hw, PCI_DEV_REG1);
713
714 if (hw->chip_id == CHIP_ID_YUKON_FE)
715 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
716 else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
717 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
718 }
719
720 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
721 {
722 u32 reg1;
723 u16 ctrl;
724
725 /* release GPHY Control reset */
726 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
727
728 /* release GMAC reset */
729 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
730
731 if (hw->flags & SKY2_HW_NEWER_PHY) {
732 /* select page 2 to access MAC control register */
733 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
734
735 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
736 /* allow GMII Power Down */
737 ctrl &= ~PHY_M_MAC_GMIF_PUP;
738 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
739
740 /* set page register back to 0 */
741 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
742 }
743
744 /* setup General Purpose Control Register */
745 gma_write16(hw, port, GM_GP_CTRL,
746 GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
747 GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
748 GM_GPCR_AU_SPD_DIS);
749
750 if (hw->chip_id != CHIP_ID_YUKON_EC) {
751 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
752 /* select page 2 to access MAC control register */
753 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
754
755 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
756 /* enable Power Down */
757 ctrl |= PHY_M_PC_POW_D_ENA;
758 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
759
760 /* set page register back to 0 */
761 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
762 }
763
764 /* set IEEE compatible Power Down Mode (dev. #4.99) */
765 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
766 }
767
768 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
769 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
770 reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
771 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
772 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
773 }
774
775 /* configure IPG according to used link speed */
776 static void sky2_set_ipg(struct sky2_port *sky2)
777 {
778 u16 reg;
779
780 reg = gma_read16(sky2->hw, sky2->port, GM_SERIAL_MODE);
781 reg &= ~GM_SMOD_IPG_MSK;
782 if (sky2->speed > SPEED_100)
783 reg |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
784 else
785 reg |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
786 gma_write16(sky2->hw, sky2->port, GM_SERIAL_MODE, reg);
787 }
788
789 /* Enable Rx/Tx */
790 static void sky2_enable_rx_tx(struct sky2_port *sky2)
791 {
792 struct sky2_hw *hw = sky2->hw;
793 unsigned port = sky2->port;
794 u16 reg;
795
796 reg = gma_read16(hw, port, GM_GP_CTRL);
797 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
798 gma_write16(hw, port, GM_GP_CTRL, reg);
799 }
800
801 /* Force a renegotiation */
802 static void sky2_phy_reinit(struct sky2_port *sky2)
803 {
804 spin_lock_bh(&sky2->phy_lock);
805 sky2_phy_init(sky2->hw, sky2->port);
806 sky2_enable_rx_tx(sky2);
807 spin_unlock_bh(&sky2->phy_lock);
808 }
809
810 /* Put device in state to listen for Wake On Lan */
811 static void sky2_wol_init(struct sky2_port *sky2)
812 {
813 struct sky2_hw *hw = sky2->hw;
814 unsigned port = sky2->port;
815 enum flow_control save_mode;
816 u16 ctrl;
817
818 /* Bring hardware out of reset */
819 sky2_write16(hw, B0_CTST, CS_RST_CLR);
820 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
821
822 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
823 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
824
825 /* Force to 10/100
826 * sky2_reset will re-enable on resume
827 */
828 save_mode = sky2->flow_mode;
829 ctrl = sky2->advertising;
830
831 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
832 sky2->flow_mode = FC_NONE;
833
834 spin_lock_bh(&sky2->phy_lock);
835 sky2_phy_power_up(hw, port);
836 sky2_phy_init(hw, port);
837 spin_unlock_bh(&sky2->phy_lock);
838
839 sky2->flow_mode = save_mode;
840 sky2->advertising = ctrl;
841
842 /* Set GMAC to no flow control and auto update for speed/duplex */
843 gma_write16(hw, port, GM_GP_CTRL,
844 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
845 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
846
847 /* Set WOL address */
848 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
849 sky2->netdev->dev_addr, ETH_ALEN);
850
851 /* Turn on appropriate WOL control bits */
852 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
853 ctrl = 0;
854 if (sky2->wol & WAKE_PHY)
855 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
856 else
857 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
858
859 if (sky2->wol & WAKE_MAGIC)
860 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
861 else
862 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
863
864 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
865 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
866
867 /* Disable PiG firmware */
868 sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
869
870 /* block receiver */
871 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
872 }
873
874 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
875 {
876 struct net_device *dev = hw->dev[port];
877
878 if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
879 hw->chip_rev != CHIP_REV_YU_EX_A0) ||
880 hw->chip_id >= CHIP_ID_YUKON_FE_P) {
881 /* Yukon-Extreme B0 and further Extreme devices */
882 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
883 } else if (dev->mtu > ETH_DATA_LEN) {
884 /* set Tx GMAC FIFO Almost Empty Threshold */
885 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
886 (ECU_JUMBO_WM << 16) | ECU_AE_THR);
887
888 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
889 } else
890 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
891 }
892
893 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
894 {
895 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
896 u16 reg;
897 u32 rx_reg;
898 int i;
899 const u8 *addr = hw->dev[port]->dev_addr;
900
901 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
902 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
903
904 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
905
906 if (hw->chip_id == CHIP_ID_YUKON_XL &&
907 hw->chip_rev == CHIP_REV_YU_XL_A0 &&
908 port == 1) {
909 /* WA DEV_472 -- looks like crossed wires on port 2 */
910 /* clear GMAC 1 Control reset */
911 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
912 do {
913 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
914 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
915 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
916 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
917 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
918 }
919
920 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
921
922 /* Enable Transmit FIFO Underrun */
923 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
924
925 spin_lock_bh(&sky2->phy_lock);
926 sky2_phy_power_up(hw, port);
927 sky2_phy_init(hw, port);
928 spin_unlock_bh(&sky2->phy_lock);
929
930 /* MIB clear */
931 reg = gma_read16(hw, port, GM_PHY_ADDR);
932 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
933
934 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
935 gma_read16(hw, port, i);
936 gma_write16(hw, port, GM_PHY_ADDR, reg);
937
938 /* transmit control */
939 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
940
941 /* receive control reg: unicast + multicast + no FCS */
942 gma_write16(hw, port, GM_RX_CTRL,
943 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
944
945 /* transmit flow control */
946 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
947
948 /* transmit parameter */
949 gma_write16(hw, port, GM_TX_PARAM,
950 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
951 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
952 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
953 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
954
955 /* serial mode register */
956 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
957 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF_1000);
958
959 if (hw->dev[port]->mtu > ETH_DATA_LEN)
960 reg |= GM_SMOD_JUMBO_ENA;
961
962 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
963 hw->chip_rev == CHIP_REV_YU_EC_U_B1)
964 reg |= GM_NEW_FLOW_CTRL;
965
966 gma_write16(hw, port, GM_SERIAL_MODE, reg);
967
968 /* virtual address for data */
969 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
970
971 /* physical address: used for pause frames */
972 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
973
974 /* ignore counter overflows */
975 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
976 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
977 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
978
979 /* Configure Rx MAC FIFO */
980 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
981 rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
982 if (hw->chip_id == CHIP_ID_YUKON_EX ||
983 hw->chip_id == CHIP_ID_YUKON_FE_P)
984 rx_reg |= GMF_RX_OVER_ON;
985
986 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
987
988 if (hw->chip_id == CHIP_ID_YUKON_XL) {
989 /* Hardware errata - clear flush mask */
990 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
991 } else {
992 /* Flush Rx MAC FIFO on any flow control or error */
993 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
994 }
995
996 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
997 reg = RX_GMF_FL_THR_DEF + 1;
998 /* Another magic mystery workaround from sk98lin */
999 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1000 hw->chip_rev == CHIP_REV_YU_FE2_A0)
1001 reg = 0x178;
1002 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
1003
1004 /* Configure Tx MAC FIFO */
1005 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
1006 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
1007
1008 /* On chips without ram buffer, pause is controlled by MAC level */
1009 if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
1010 /* Pause threshold is scaled by 8 in bytes */
1011 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1012 hw->chip_rev == CHIP_REV_YU_FE2_A0)
1013 reg = 1568 / 8;
1014 else
1015 reg = 1024 / 8;
1016 sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
1017 sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
1018
1019 sky2_set_tx_stfwd(hw, port);
1020 }
1021
1022 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1023 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
1024 /* disable dynamic watermark */
1025 reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
1026 reg &= ~TX_DYN_WM_ENA;
1027 sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
1028 }
1029 }
1030
1031 /* Assign Ram Buffer allocation to queue */
1032 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
1033 {
1034 u32 end;
1035
1036 /* convert from K bytes to qwords used for hw register */
1037 start *= 1024/8;
1038 space *= 1024/8;
1039 end = start + space - 1;
1040
1041 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
1042 sky2_write32(hw, RB_ADDR(q, RB_START), start);
1043 sky2_write32(hw, RB_ADDR(q, RB_END), end);
1044 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
1045 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
1046
1047 if (q == Q_R1 || q == Q_R2) {
1048 u32 tp = space - space/4;
1049
1050 /* On receive queue's set the thresholds
1051 * give receiver priority when > 3/4 full
1052 * send pause when down to 2K
1053 */
1054 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
1055 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
1056
1057 tp = space - 2048/8;
1058 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
1059 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
1060 } else {
1061 /* Enable store & forward on Tx queue's because
1062 * Tx FIFO is only 1K on Yukon
1063 */
1064 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
1065 }
1066
1067 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
1068 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
1069 }
1070
1071 /* Setup Bus Memory Interface */
1072 static void sky2_qset(struct sky2_hw *hw, u16 q)
1073 {
1074 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
1075 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
1076 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
1077 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
1078 }
1079
1080 /* Setup prefetch unit registers. This is the interface between
1081 * hardware and driver list elements
1082 */
1083 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
1084 dma_addr_t addr, u32 last)
1085 {
1086 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1087 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
1088 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr));
1089 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr));
1090 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
1091 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
1092
1093 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
1094 }
1095
1096 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
1097 {
1098 struct sky2_tx_le *le = sky2->tx_le + *slot;
1099
1100 *slot = RING_NEXT(*slot, sky2->tx_ring_size);
1101 le->ctrl = 0;
1102 return le;
1103 }
1104
1105 static void tx_init(struct sky2_port *sky2)
1106 {
1107 struct sky2_tx_le *le;
1108
1109 sky2->tx_prod = sky2->tx_cons = 0;
1110 sky2->tx_tcpsum = 0;
1111 sky2->tx_last_mss = 0;
1112
1113 le = get_tx_le(sky2, &sky2->tx_prod);
1114 le->addr = 0;
1115 le->opcode = OP_ADDR64 | HW_OWNER;
1116 sky2->tx_last_upper = 0;
1117 }
1118
1119 /* Update chip's next pointer */
1120 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
1121 {
1122 /* Make sure write' to descriptors are complete before we tell hardware */
1123 wmb();
1124 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
1125
1126 /* Synchronize I/O on since next processor may write to tail */
1127 mmiowb();
1128 }
1129
1130
1131 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
1132 {
1133 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
1134 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
1135 le->ctrl = 0;
1136 return le;
1137 }
1138
1139 static unsigned sky2_get_rx_threshold(struct sky2_port *sky2)
1140 {
1141 unsigned size;
1142
1143 /* Space needed for frame data + headers rounded up */
1144 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1145
1146 /* Stopping point for hardware truncation */
1147 return (size - 8) / sizeof(u32);
1148 }
1149
1150 static unsigned sky2_get_rx_data_size(struct sky2_port *sky2)
1151 {
1152 struct rx_ring_info *re;
1153 unsigned size;
1154
1155 /* Space needed for frame data + headers rounded up */
1156 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1157
1158 sky2->rx_nfrags = size >> PAGE_SHIFT;
1159 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1160
1161 /* Compute residue after pages */
1162 size -= sky2->rx_nfrags << PAGE_SHIFT;
1163
1164 /* Optimize to handle small packets and headers */
1165 if (size < copybreak)
1166 size = copybreak;
1167 if (size < ETH_HLEN)
1168 size = ETH_HLEN;
1169
1170 return size;
1171 }
1172
1173 /* Build description to hardware for one receive segment */
1174 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
1175 dma_addr_t map, unsigned len)
1176 {
1177 struct sky2_rx_le *le;
1178
1179 if (sizeof(dma_addr_t) > sizeof(u32)) {
1180 le = sky2_next_rx(sky2);
1181 le->addr = cpu_to_le32(upper_32_bits(map));
1182 le->opcode = OP_ADDR64 | HW_OWNER;
1183 }
1184
1185 le = sky2_next_rx(sky2);
1186 le->addr = cpu_to_le32(lower_32_bits(map));
1187 le->length = cpu_to_le16(len);
1188 le->opcode = op | HW_OWNER;
1189 }
1190
1191 /* Build description to hardware for one possibly fragmented skb */
1192 static void sky2_rx_submit(struct sky2_port *sky2,
1193 const struct rx_ring_info *re)
1194 {
1195 int i;
1196
1197 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
1198
1199 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
1200 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
1201 }
1202
1203
1204 static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
1205 unsigned size)
1206 {
1207 struct sk_buff *skb = re->skb;
1208 int i;
1209
1210 re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
1211 if (pci_dma_mapping_error(pdev, re->data_addr))
1212 goto mapping_error;
1213
1214 dma_unmap_len_set(re, data_size, size);
1215
1216 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1217 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1218
1219 re->frag_addr[i] = skb_frag_dma_map(&pdev->dev, frag, 0,
1220 skb_frag_size(frag),
1221 DMA_FROM_DEVICE);
1222
1223 if (dma_mapping_error(&pdev->dev, re->frag_addr[i]))
1224 goto map_page_error;
1225 }
1226 return 0;
1227
1228 map_page_error:
1229 while (--i >= 0) {
1230 pci_unmap_page(pdev, re->frag_addr[i],
1231 skb_frag_size(&skb_shinfo(skb)->frags[i]),
1232 PCI_DMA_FROMDEVICE);
1233 }
1234
1235 pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
1236 PCI_DMA_FROMDEVICE);
1237
1238 mapping_error:
1239 if (net_ratelimit())
1240 dev_warn(&pdev->dev, "%s: rx mapping error\n",
1241 skb->dev->name);
1242 return -EIO;
1243 }
1244
1245 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
1246 {
1247 struct sk_buff *skb = re->skb;
1248 int i;
1249
1250 pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
1251 PCI_DMA_FROMDEVICE);
1252
1253 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1254 pci_unmap_page(pdev, re->frag_addr[i],
1255 skb_frag_size(&skb_shinfo(skb)->frags[i]),
1256 PCI_DMA_FROMDEVICE);
1257 }
1258
1259 /* Tell chip where to start receive checksum.
1260 * Actually has two checksums, but set both same to avoid possible byte
1261 * order problems.
1262 */
1263 static void rx_set_checksum(struct sky2_port *sky2)
1264 {
1265 struct sky2_rx_le *le = sky2_next_rx(sky2);
1266
1267 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
1268 le->ctrl = 0;
1269 le->opcode = OP_TCPSTART | HW_OWNER;
1270
1271 sky2_write32(sky2->hw,
1272 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1273 (sky2->netdev->features & NETIF_F_RXCSUM)
1274 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
1275 }
1276
1277 /* Enable/disable receive hash calculation (RSS) */
1278 static void rx_set_rss(struct net_device *dev, u32 features)
1279 {
1280 struct sky2_port *sky2 = netdev_priv(dev);
1281 struct sky2_hw *hw = sky2->hw;
1282 int i, nkeys = 4;
1283
1284 /* Supports IPv6 and other modes */
1285 if (hw->flags & SKY2_HW_NEW_LE) {
1286 nkeys = 10;
1287 sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL);
1288 }
1289
1290 /* Program RSS initial values */
1291 if (features & NETIF_F_RXHASH) {
1292 u32 key[nkeys];
1293
1294 get_random_bytes(key, nkeys * sizeof(u32));
1295 for (i = 0; i < nkeys; i++)
1296 sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
1297 key[i]);
1298
1299 /* Need to turn on (undocumented) flag to make hashing work */
1300 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
1301 RX_STFW_ENA);
1302
1303 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1304 BMU_ENA_RX_RSS_HASH);
1305 } else
1306 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1307 BMU_DIS_RX_RSS_HASH);
1308 }
1309
1310 /*
1311 * The RX Stop command will not work for Yukon-2 if the BMU does not
1312 * reach the end of packet and since we can't make sure that we have
1313 * incoming data, we must reset the BMU while it is not doing a DMA
1314 * transfer. Since it is possible that the RX path is still active,
1315 * the RX RAM buffer will be stopped first, so any possible incoming
1316 * data will not trigger a DMA. After the RAM buffer is stopped, the
1317 * BMU is polled until any DMA in progress is ended and only then it
1318 * will be reset.
1319 */
1320 static void sky2_rx_stop(struct sky2_port *sky2)
1321 {
1322 struct sky2_hw *hw = sky2->hw;
1323 unsigned rxq = rxqaddr[sky2->port];
1324 int i;
1325
1326 /* disable the RAM Buffer receive queue */
1327 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
1328
1329 for (i = 0; i < 0xffff; i++)
1330 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
1331 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
1332 goto stopped;
1333
1334 netdev_warn(sky2->netdev, "receiver stop failed\n");
1335 stopped:
1336 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
1337
1338 /* reset the Rx prefetch unit */
1339 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1340 mmiowb();
1341 }
1342
1343 /* Clean out receive buffer area, assumes receiver hardware stopped */
1344 static void sky2_rx_clean(struct sky2_port *sky2)
1345 {
1346 unsigned i;
1347
1348 memset(sky2->rx_le, 0, RX_LE_BYTES);
1349 for (i = 0; i < sky2->rx_pending; i++) {
1350 struct rx_ring_info *re = sky2->rx_ring + i;
1351
1352 if (re->skb) {
1353 sky2_rx_unmap_skb(sky2->hw->pdev, re);
1354 kfree_skb(re->skb);
1355 re->skb = NULL;
1356 }
1357 }
1358 }
1359
1360 /* Basic MII support */
1361 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1362 {
1363 struct mii_ioctl_data *data = if_mii(ifr);
1364 struct sky2_port *sky2 = netdev_priv(dev);
1365 struct sky2_hw *hw = sky2->hw;
1366 int err = -EOPNOTSUPP;
1367
1368 if (!netif_running(dev))
1369 return -ENODEV; /* Phy still in reset */
1370
1371 switch (cmd) {
1372 case SIOCGMIIPHY:
1373 data->phy_id = PHY_ADDR_MARV;
1374
1375 /* fallthru */
1376 case SIOCGMIIREG: {
1377 u16 val = 0;
1378
1379 spin_lock_bh(&sky2->phy_lock);
1380 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
1381 spin_unlock_bh(&sky2->phy_lock);
1382
1383 data->val_out = val;
1384 break;
1385 }
1386
1387 case SIOCSMIIREG:
1388 spin_lock_bh(&sky2->phy_lock);
1389 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
1390 data->val_in);
1391 spin_unlock_bh(&sky2->phy_lock);
1392 break;
1393 }
1394 return err;
1395 }
1396
1397 #define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO)
1398
1399 static void sky2_vlan_mode(struct net_device *dev, u32 features)
1400 {
1401 struct sky2_port *sky2 = netdev_priv(dev);
1402 struct sky2_hw *hw = sky2->hw;
1403 u16 port = sky2->port;
1404
1405 if (features & NETIF_F_HW_VLAN_RX)
1406 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1407 RX_VLAN_STRIP_ON);
1408 else
1409 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1410 RX_VLAN_STRIP_OFF);
1411
1412 if (features & NETIF_F_HW_VLAN_TX) {
1413 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1414 TX_VLAN_TAG_ON);
1415
1416 dev->vlan_features |= SKY2_VLAN_OFFLOADS;
1417 } else {
1418 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1419 TX_VLAN_TAG_OFF);
1420
1421 /* Can't do transmit offload of vlan without hw vlan */
1422 dev->vlan_features &= ~SKY2_VLAN_OFFLOADS;
1423 }
1424 }
1425
1426 /* Amount of required worst case padding in rx buffer */
1427 static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
1428 {
1429 return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
1430 }
1431
1432 /*
1433 * Allocate an skb for receiving. If the MTU is large enough
1434 * make the skb non-linear with a fragment list of pages.
1435 */
1436 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, gfp_t gfp)
1437 {
1438 struct sk_buff *skb;
1439 int i;
1440
1441 skb = __netdev_alloc_skb(sky2->netdev,
1442 sky2->rx_data_size + sky2_rx_pad(sky2->hw),
1443 gfp);
1444 if (!skb)
1445 goto nomem;
1446
1447 if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
1448 unsigned char *start;
1449 /*
1450 * Workaround for a bug in FIFO that cause hang
1451 * if the FIFO if the receive buffer is not 64 byte aligned.
1452 * The buffer returned from netdev_alloc_skb is
1453 * aligned except if slab debugging is enabled.
1454 */
1455 start = PTR_ALIGN(skb->data, 8);
1456 skb_reserve(skb, start - skb->data);
1457 } else
1458 skb_reserve(skb, NET_IP_ALIGN);
1459
1460 for (i = 0; i < sky2->rx_nfrags; i++) {
1461 struct page *page = alloc_page(gfp);
1462
1463 if (!page)
1464 goto free_partial;
1465 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1466 }
1467
1468 return skb;
1469 free_partial:
1470 kfree_skb(skb);
1471 nomem:
1472 return NULL;
1473 }
1474
1475 static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
1476 {
1477 sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
1478 }
1479
1480 static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
1481 {
1482 struct sky2_hw *hw = sky2->hw;
1483 unsigned i;
1484
1485 sky2->rx_data_size = sky2_get_rx_data_size(sky2);
1486
1487 /* Fill Rx ring */
1488 for (i = 0; i < sky2->rx_pending; i++) {
1489 struct rx_ring_info *re = sky2->rx_ring + i;
1490
1491 re->skb = sky2_rx_alloc(sky2, GFP_KERNEL);
1492 if (!re->skb)
1493 return -ENOMEM;
1494
1495 if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
1496 dev_kfree_skb(re->skb);
1497 re->skb = NULL;
1498 return -ENOMEM;
1499 }
1500 }
1501 return 0;
1502 }
1503
1504 /*
1505 * Setup receiver buffer pool.
1506 * Normal case this ends up creating one list element for skb
1507 * in the receive ring. Worst case if using large MTU and each
1508 * allocation falls on a different 64 bit region, that results
1509 * in 6 list elements per ring entry.
1510 * One element is used for checksum enable/disable, and one
1511 * extra to avoid wrap.
1512 */
1513 static void sky2_rx_start(struct sky2_port *sky2)
1514 {
1515 struct sky2_hw *hw = sky2->hw;
1516 struct rx_ring_info *re;
1517 unsigned rxq = rxqaddr[sky2->port];
1518 unsigned i, thresh;
1519
1520 sky2->rx_put = sky2->rx_next = 0;
1521 sky2_qset(hw, rxq);
1522
1523 /* On PCI express lowering the watermark gives better performance */
1524 if (pci_is_pcie(hw->pdev))
1525 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1526
1527 /* These chips have no ram buffer?
1528 * MAC Rx RAM Read is controlled by hardware */
1529 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1530 hw->chip_rev > CHIP_REV_YU_EC_U_A0)
1531 sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
1532
1533 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1534
1535 if (!(hw->flags & SKY2_HW_NEW_LE))
1536 rx_set_checksum(sky2);
1537
1538 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
1539 rx_set_rss(sky2->netdev, sky2->netdev->features);
1540
1541 /* submit Rx ring */
1542 for (i = 0; i < sky2->rx_pending; i++) {
1543 re = sky2->rx_ring + i;
1544 sky2_rx_submit(sky2, re);
1545 }
1546
1547 /*
1548 * The receiver hangs if it receives frames larger than the
1549 * packet buffer. As a workaround, truncate oversize frames, but
1550 * the register is limited to 9 bits, so if you do frames > 2052
1551 * you better get the MTU right!
1552 */
1553 thresh = sky2_get_rx_threshold(sky2);
1554 if (thresh > 0x1ff)
1555 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1556 else {
1557 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1558 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1559 }
1560
1561 /* Tell chip about available buffers */
1562 sky2_rx_update(sky2, rxq);
1563
1564 if (hw->chip_id == CHIP_ID_YUKON_EX ||
1565 hw->chip_id == CHIP_ID_YUKON_SUPR) {
1566 /*
1567 * Disable flushing of non ASF packets;
1568 * must be done after initializing the BMUs;
1569 * drivers without ASF support should do this too, otherwise
1570 * it may happen that they cannot run on ASF devices;
1571 * remember that the MAC FIFO isn't reset during initialization.
1572 */
1573 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
1574 }
1575
1576 if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
1577 /* Enable RX Home Address & Routing Header checksum fix */
1578 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
1579 RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
1580
1581 /* Enable TX Home Address & Routing Header checksum fix */
1582 sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
1583 TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
1584 }
1585 }
1586
1587 static int sky2_alloc_buffers(struct sky2_port *sky2)
1588 {
1589 struct sky2_hw *hw = sky2->hw;
1590
1591 /* must be power of 2 */
1592 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1593 sky2->tx_ring_size *
1594 sizeof(struct sky2_tx_le),
1595 &sky2->tx_le_map);
1596 if (!sky2->tx_le)
1597 goto nomem;
1598
1599 sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info),
1600 GFP_KERNEL);
1601 if (!sky2->tx_ring)
1602 goto nomem;
1603
1604 sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
1605 &sky2->rx_le_map);
1606 if (!sky2->rx_le)
1607 goto nomem;
1608 memset(sky2->rx_le, 0, RX_LE_BYTES);
1609
1610 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
1611 GFP_KERNEL);
1612 if (!sky2->rx_ring)
1613 goto nomem;
1614
1615 return sky2_alloc_rx_skbs(sky2);
1616 nomem:
1617 return -ENOMEM;
1618 }
1619
1620 static void sky2_free_buffers(struct sky2_port *sky2)
1621 {
1622 struct sky2_hw *hw = sky2->hw;
1623
1624 sky2_rx_clean(sky2);
1625
1626 if (sky2->rx_le) {
1627 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1628 sky2->rx_le, sky2->rx_le_map);
1629 sky2->rx_le = NULL;
1630 }
1631 if (sky2->tx_le) {
1632 pci_free_consistent(hw->pdev,
1633 sky2->tx_ring_size * sizeof(struct sky2_tx_le),
1634 sky2->tx_le, sky2->tx_le_map);
1635 sky2->tx_le = NULL;
1636 }
1637 kfree(sky2->tx_ring);
1638 kfree(sky2->rx_ring);
1639
1640 sky2->tx_ring = NULL;
1641 sky2->rx_ring = NULL;
1642 }
1643
1644 static void sky2_hw_up(struct sky2_port *sky2)
1645 {
1646 struct sky2_hw *hw = sky2->hw;
1647 unsigned port = sky2->port;
1648 u32 ramsize;
1649 int cap;
1650 struct net_device *otherdev = hw->dev[sky2->port^1];
1651
1652 tx_init(sky2);
1653
1654 /*
1655 * On dual port PCI-X card, there is an problem where status
1656 * can be received out of order due to split transactions
1657 */
1658 if (otherdev && netif_running(otherdev) &&
1659 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1660 u16 cmd;
1661
1662 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1663 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1664 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1665 }
1666
1667 sky2_mac_init(hw, port);
1668
1669 /* Register is number of 4K blocks on internal RAM buffer. */
1670 ramsize = sky2_read8(hw, B2_E_0) * 4;
1671 if (ramsize > 0) {
1672 u32 rxspace;
1673
1674 netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
1675 if (ramsize < 16)
1676 rxspace = ramsize / 2;
1677 else
1678 rxspace = 8 + (2*(ramsize - 16))/3;
1679
1680 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1681 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1682
1683 /* Make sure SyncQ is disabled */
1684 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1685 RB_RST_SET);
1686 }
1687
1688 sky2_qset(hw, txqaddr[port]);
1689
1690 /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
1691 if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
1692 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
1693
1694 /* Set almost empty threshold */
1695 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1696 hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1697 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
1698
1699 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1700 sky2->tx_ring_size - 1);
1701
1702 sky2_vlan_mode(sky2->netdev, sky2->netdev->features);
1703 netdev_update_features(sky2->netdev);
1704
1705 sky2_rx_start(sky2);
1706 }
1707
1708 /* Setup device IRQ and enable napi to process */
1709 static int sky2_setup_irq(struct sky2_hw *hw, const char *name)
1710 {
1711 struct pci_dev *pdev = hw->pdev;
1712 int err;
1713
1714 err = request_irq(pdev->irq, sky2_intr,
1715 (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
1716 name, hw);
1717 if (err)
1718 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
1719 else {
1720 napi_enable(&hw->napi);
1721 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
1722 sky2_read32(hw, B0_IMSK);
1723 }
1724
1725 return err;
1726 }
1727
1728
1729 /* Bring up network interface. */
1730 static int sky2_up(struct net_device *dev)
1731 {
1732 struct sky2_port *sky2 = netdev_priv(dev);
1733 struct sky2_hw *hw = sky2->hw;
1734 unsigned port = sky2->port;
1735 u32 imask;
1736 int err;
1737
1738 netif_carrier_off(dev);
1739
1740 err = sky2_alloc_buffers(sky2);
1741 if (err)
1742 goto err_out;
1743
1744 /* With single port, IRQ is setup when device is brought up */
1745 if (hw->ports == 1 && (err = sky2_setup_irq(hw, dev->name)))
1746 goto err_out;
1747
1748 sky2_hw_up(sky2);
1749
1750 /* Enable interrupts from phy/mac for port */
1751 imask = sky2_read32(hw, B0_IMSK);
1752 imask |= portirq_msk[port];
1753 sky2_write32(hw, B0_IMSK, imask);
1754 sky2_read32(hw, B0_IMSK);
1755
1756 netif_info(sky2, ifup, dev, "enabling interface\n");
1757
1758 return 0;
1759
1760 err_out:
1761 sky2_free_buffers(sky2);
1762 return err;
1763 }
1764
1765 /* Modular subtraction in ring */
1766 static inline int tx_inuse(const struct sky2_port *sky2)
1767 {
1768 return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1);
1769 }
1770
1771 /* Number of list elements available for next tx */
1772 static inline int tx_avail(const struct sky2_port *sky2)
1773 {
1774 return sky2->tx_pending - tx_inuse(sky2);
1775 }
1776
1777 /* Estimate of number of transmit list elements required */
1778 static unsigned tx_le_req(const struct sk_buff *skb)
1779 {
1780 unsigned count;
1781
1782 count = (skb_shinfo(skb)->nr_frags + 1)
1783 * (sizeof(dma_addr_t) / sizeof(u32));
1784
1785 if (skb_is_gso(skb))
1786 ++count;
1787 else if (sizeof(dma_addr_t) == sizeof(u32))
1788 ++count; /* possible vlan */
1789
1790 if (skb->ip_summed == CHECKSUM_PARTIAL)
1791 ++count;
1792
1793 return count;
1794 }
1795
1796 static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
1797 {
1798 if (re->flags & TX_MAP_SINGLE)
1799 pci_unmap_single(pdev, dma_unmap_addr(re, mapaddr),
1800 dma_unmap_len(re, maplen),
1801 PCI_DMA_TODEVICE);
1802 else if (re->flags & TX_MAP_PAGE)
1803 pci_unmap_page(pdev, dma_unmap_addr(re, mapaddr),
1804 dma_unmap_len(re, maplen),
1805 PCI_DMA_TODEVICE);
1806 re->flags = 0;
1807 }
1808
1809 /*
1810 * Put one packet in ring for transmit.
1811 * A single packet can generate multiple list elements, and
1812 * the number of ring elements will probably be less than the number
1813 * of list elements used.
1814 */
1815 static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
1816 struct net_device *dev)
1817 {
1818 struct sky2_port *sky2 = netdev_priv(dev);
1819 struct sky2_hw *hw = sky2->hw;
1820 struct sky2_tx_le *le = NULL;
1821 struct tx_ring_info *re;
1822 unsigned i, len;
1823 dma_addr_t mapping;
1824 u32 upper;
1825 u16 slot;
1826 u16 mss;
1827 u8 ctrl;
1828
1829 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1830 return NETDEV_TX_BUSY;
1831
1832 len = skb_headlen(skb);
1833 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1834
1835 if (pci_dma_mapping_error(hw->pdev, mapping))
1836 goto mapping_error;
1837
1838 slot = sky2->tx_prod;
1839 netif_printk(sky2, tx_queued, KERN_DEBUG, dev,
1840 "tx queued, slot %u, len %d\n", slot, skb->len);
1841
1842 /* Send high bits if needed */
1843 upper = upper_32_bits(mapping);
1844 if (upper != sky2->tx_last_upper) {
1845 le = get_tx_le(sky2, &slot);
1846 le->addr = cpu_to_le32(upper);
1847 sky2->tx_last_upper = upper;
1848 le->opcode = OP_ADDR64 | HW_OWNER;
1849 }
1850
1851 /* Check for TCP Segmentation Offload */
1852 mss = skb_shinfo(skb)->gso_size;
1853 if (mss != 0) {
1854
1855 if (!(hw->flags & SKY2_HW_NEW_LE))
1856 mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
1857
1858 if (mss != sky2->tx_last_mss) {
1859 le = get_tx_le(sky2, &slot);
1860 le->addr = cpu_to_le32(mss);
1861
1862 if (hw->flags & SKY2_HW_NEW_LE)
1863 le->opcode = OP_MSS | HW_OWNER;
1864 else
1865 le->opcode = OP_LRGLEN | HW_OWNER;
1866 sky2->tx_last_mss = mss;
1867 }
1868 }
1869
1870 ctrl = 0;
1871
1872 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1873 if (vlan_tx_tag_present(skb)) {
1874 if (!le) {
1875 le = get_tx_le(sky2, &slot);
1876 le->addr = 0;
1877 le->opcode = OP_VLAN|HW_OWNER;
1878 } else
1879 le->opcode |= OP_VLAN;
1880 le->length = cpu_to_be16(vlan_tx_tag_get(skb));
1881 ctrl |= INS_VLAN;
1882 }
1883
1884 /* Handle TCP checksum offload */
1885 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1886 /* On Yukon EX (some versions) encoding change. */
1887 if (hw->flags & SKY2_HW_AUTO_TX_SUM)
1888 ctrl |= CALSUM; /* auto checksum */
1889 else {
1890 const unsigned offset = skb_transport_offset(skb);
1891 u32 tcpsum;
1892
1893 tcpsum = offset << 16; /* sum start */
1894 tcpsum |= offset + skb->csum_offset; /* sum write */
1895
1896 ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1897 if (ip_hdr(skb)->protocol == IPPROTO_UDP)
1898 ctrl |= UDPTCP;
1899
1900 if (tcpsum != sky2->tx_tcpsum) {
1901 sky2->tx_tcpsum = tcpsum;
1902
1903 le = get_tx_le(sky2, &slot);
1904 le->addr = cpu_to_le32(tcpsum);
1905 le->length = 0; /* initial checksum value */
1906 le->ctrl = 1; /* one packet */
1907 le->opcode = OP_TCPLISW | HW_OWNER;
1908 }
1909 }
1910 }
1911
1912 re = sky2->tx_ring + slot;
1913 re->flags = TX_MAP_SINGLE;
1914 dma_unmap_addr_set(re, mapaddr, mapping);
1915 dma_unmap_len_set(re, maplen, len);
1916
1917 le = get_tx_le(sky2, &slot);
1918 le->addr = cpu_to_le32(lower_32_bits(mapping));
1919 le->length = cpu_to_le16(len);
1920 le->ctrl = ctrl;
1921 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1922
1923
1924 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1925 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1926
1927 mapping = skb_frag_dma_map(&hw->pdev->dev, frag, 0,
1928 skb_frag_size(frag), DMA_TO_DEVICE);
1929
1930 if (dma_mapping_error(&hw->pdev->dev, mapping))
1931 goto mapping_unwind;
1932
1933 upper = upper_32_bits(mapping);
1934 if (upper != sky2->tx_last_upper) {
1935 le = get_tx_le(sky2, &slot);
1936 le->addr = cpu_to_le32(upper);
1937 sky2->tx_last_upper = upper;
1938 le->opcode = OP_ADDR64 | HW_OWNER;
1939 }
1940
1941 re = sky2->tx_ring + slot;
1942 re->flags = TX_MAP_PAGE;
1943 dma_unmap_addr_set(re, mapaddr, mapping);
1944 dma_unmap_len_set(re, maplen, skb_frag_size(frag));
1945
1946 le = get_tx_le(sky2, &slot);
1947 le->addr = cpu_to_le32(lower_32_bits(mapping));
1948 le->length = cpu_to_le16(skb_frag_size(frag));
1949 le->ctrl = ctrl;
1950 le->opcode = OP_BUFFER | HW_OWNER;
1951 }
1952
1953 re->skb = skb;
1954 le->ctrl |= EOP;
1955
1956 sky2->tx_prod = slot;
1957
1958 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1959 netif_stop_queue(dev);
1960
1961 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1962
1963 return NETDEV_TX_OK;
1964
1965 mapping_unwind:
1966 for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) {
1967 re = sky2->tx_ring + i;
1968
1969 sky2_tx_unmap(hw->pdev, re);
1970 }
1971
1972 mapping_error:
1973 if (net_ratelimit())
1974 dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
1975 dev_kfree_skb(skb);
1976 return NETDEV_TX_OK;
1977 }
1978
1979 /*
1980 * Free ring elements from starting at tx_cons until "done"
1981 *
1982 * NB:
1983 * 1. The hardware will tell us about partial completion of multi-part
1984 * buffers so make sure not to free skb to early.
1985 * 2. This may run in parallel start_xmit because the it only
1986 * looks at the tail of the queue of FIFO (tx_cons), not
1987 * the head (tx_prod)
1988 */
1989 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
1990 {
1991 struct net_device *dev = sky2->netdev;
1992 unsigned idx;
1993
1994 BUG_ON(done >= sky2->tx_ring_size);
1995
1996 for (idx = sky2->tx_cons; idx != done;
1997 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
1998 struct tx_ring_info *re = sky2->tx_ring + idx;
1999 struct sk_buff *skb = re->skb;
2000
2001 sky2_tx_unmap(sky2->hw->pdev, re);
2002
2003 if (skb) {
2004 netif_printk(sky2, tx_done, KERN_DEBUG, dev,
2005 "tx done %u\n", idx);
2006
2007 u64_stats_update_begin(&sky2->tx_stats.syncp);
2008 ++sky2->tx_stats.packets;
2009 sky2->tx_stats.bytes += skb->len;
2010 u64_stats_update_end(&sky2->tx_stats.syncp);
2011
2012 re->skb = NULL;
2013 dev_kfree_skb_any(skb);
2014
2015 sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
2016 }
2017 }
2018
2019 sky2->tx_cons = idx;
2020 smp_mb();
2021 }
2022
2023 static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
2024 {
2025 /* Disable Force Sync bit and Enable Alloc bit */
2026 sky2_write8(hw, SK_REG(port, TXA_CTRL),
2027 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
2028
2029 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
2030 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
2031 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
2032
2033 /* Reset the PCI FIFO of the async Tx queue */
2034 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
2035 BMU_RST_SET | BMU_FIFO_RST);
2036
2037 /* Reset the Tx prefetch units */
2038 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
2039 PREF_UNIT_RST_SET);
2040
2041 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
2042 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
2043 }
2044
2045 static void sky2_hw_down(struct sky2_port *sky2)
2046 {
2047 struct sky2_hw *hw = sky2->hw;
2048 unsigned port = sky2->port;
2049 u16 ctrl;
2050
2051 /* Force flow control off */
2052 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
2053
2054 /* Stop transmitter */
2055 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
2056 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
2057
2058 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
2059 RB_RST_SET | RB_DIS_OP_MD);
2060
2061 ctrl = gma_read16(hw, port, GM_GP_CTRL);
2062 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
2063 gma_write16(hw, port, GM_GP_CTRL, ctrl);
2064
2065 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
2066
2067 /* Workaround shared GMAC reset */
2068 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 &&
2069 port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
2070 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
2071
2072 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
2073
2074 /* Force any delayed status interrupt and NAPI */
2075 sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
2076 sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
2077 sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
2078 sky2_read8(hw, STAT_ISR_TIMER_CTRL);
2079
2080 sky2_rx_stop(sky2);
2081
2082 spin_lock_bh(&sky2->phy_lock);
2083 sky2_phy_power_down(hw, port);
2084 spin_unlock_bh(&sky2->phy_lock);
2085
2086 sky2_tx_reset(hw, port);
2087
2088 /* Free any pending frames stuck in HW queue */
2089 sky2_tx_complete(sky2, sky2->tx_prod);
2090 }
2091
2092 /* Network shutdown */
2093 static int sky2_down(struct net_device *dev)
2094 {
2095 struct sky2_port *sky2 = netdev_priv(dev);
2096 struct sky2_hw *hw = sky2->hw;
2097
2098 /* Never really got started! */
2099 if (!sky2->tx_le)
2100 return 0;
2101
2102 netif_info(sky2, ifdown, dev, "disabling interface\n");
2103
2104 /* Disable port IRQ */
2105 sky2_write32(hw, B0_IMSK,
2106 sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
2107 sky2_read32(hw, B0_IMSK);
2108
2109 if (hw->ports == 1) {
2110 napi_disable(&hw->napi);
2111 free_irq(hw->pdev->irq, hw);
2112 } else {
2113 synchronize_irq(hw->pdev->irq);
2114 napi_synchronize(&hw->napi);
2115 }
2116
2117 sky2_hw_down(sky2);
2118
2119 sky2_free_buffers(sky2);
2120
2121 return 0;
2122 }
2123
2124 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
2125 {
2126 if (hw->flags & SKY2_HW_FIBRE_PHY)
2127 return SPEED_1000;
2128
2129 if (!(hw->flags & SKY2_HW_GIGABIT)) {
2130 if (aux & PHY_M_PS_SPEED_100)
2131 return SPEED_100;
2132 else
2133 return SPEED_10;
2134 }
2135
2136 switch (aux & PHY_M_PS_SPEED_MSK) {
2137 case PHY_M_PS_SPEED_1000:
2138 return SPEED_1000;
2139 case PHY_M_PS_SPEED_100:
2140 return SPEED_100;
2141 default:
2142 return SPEED_10;
2143 }
2144 }
2145
2146 static void sky2_link_up(struct sky2_port *sky2)
2147 {
2148 struct sky2_hw *hw = sky2->hw;
2149 unsigned port = sky2->port;
2150 static const char *fc_name[] = {
2151 [FC_NONE] = "none",
2152 [FC_TX] = "tx",
2153 [FC_RX] = "rx",
2154 [FC_BOTH] = "both",
2155 };
2156
2157 sky2_set_ipg(sky2);
2158
2159 sky2_enable_rx_tx(sky2);
2160
2161 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
2162
2163 netif_carrier_on(sky2->netdev);
2164
2165 mod_timer(&hw->watchdog_timer, jiffies + 1);
2166
2167 /* Turn on link LED */
2168 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
2169 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
2170
2171 netif_info(sky2, link, sky2->netdev,
2172 "Link is up at %d Mbps, %s duplex, flow control %s\n",
2173 sky2->speed,
2174 sky2->duplex == DUPLEX_FULL ? "full" : "half",
2175 fc_name[sky2->flow_status]);
2176 }
2177
2178 static void sky2_link_down(struct sky2_port *sky2)
2179 {
2180 struct sky2_hw *hw = sky2->hw;
2181 unsigned port = sky2->port;
2182 u16 reg;
2183
2184 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
2185
2186 reg = gma_read16(hw, port, GM_GP_CTRL);
2187 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
2188 gma_write16(hw, port, GM_GP_CTRL, reg);
2189
2190 netif_carrier_off(sky2->netdev);
2191
2192 /* Turn off link LED */
2193 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
2194
2195 netif_info(sky2, link, sky2->netdev, "Link is down\n");
2196
2197 sky2_phy_init(hw, port);
2198 }
2199
2200 static enum flow_control sky2_flow(int rx, int tx)
2201 {
2202 if (rx)
2203 return tx ? FC_BOTH : FC_RX;
2204 else
2205 return tx ? FC_TX : FC_NONE;
2206 }
2207
2208 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
2209 {
2210 struct sky2_hw *hw = sky2->hw;
2211 unsigned port = sky2->port;
2212 u16 advert, lpa;
2213
2214 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
2215 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
2216 if (lpa & PHY_M_AN_RF) {
2217 netdev_err(sky2->netdev, "remote fault\n");
2218 return -1;
2219 }
2220
2221 if (!(aux & PHY_M_PS_SPDUP_RES)) {
2222 netdev_err(sky2->netdev, "speed/duplex mismatch\n");
2223 return -1;
2224 }
2225
2226 sky2->speed = sky2_phy_speed(hw, aux);
2227 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2228
2229 /* Since the pause result bits seem to in different positions on
2230 * different chips. look at registers.
2231 */
2232 if (hw->flags & SKY2_HW_FIBRE_PHY) {
2233 /* Shift for bits in fiber PHY */
2234 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
2235 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
2236
2237 if (advert & ADVERTISE_1000XPAUSE)
2238 advert |= ADVERTISE_PAUSE_CAP;
2239 if (advert & ADVERTISE_1000XPSE_ASYM)
2240 advert |= ADVERTISE_PAUSE_ASYM;
2241 if (lpa & LPA_1000XPAUSE)
2242 lpa |= LPA_PAUSE_CAP;
2243 if (lpa & LPA_1000XPAUSE_ASYM)
2244 lpa |= LPA_PAUSE_ASYM;
2245 }
2246
2247 sky2->flow_status = FC_NONE;
2248 if (advert & ADVERTISE_PAUSE_CAP) {
2249 if (lpa & LPA_PAUSE_CAP)
2250 sky2->flow_status = FC_BOTH;
2251 else if (advert & ADVERTISE_PAUSE_ASYM)
2252 sky2->flow_status = FC_RX;
2253 } else if (advert & ADVERTISE_PAUSE_ASYM) {
2254 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
2255 sky2->flow_status = FC_TX;
2256 }
2257
2258 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 &&
2259 !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
2260 sky2->flow_status = FC_NONE;
2261
2262 if (sky2->flow_status & FC_TX)
2263 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
2264 else
2265 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
2266
2267 return 0;
2268 }
2269
2270 /* Interrupt from PHY */
2271 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
2272 {
2273 struct net_device *dev = hw->dev[port];
2274 struct sky2_port *sky2 = netdev_priv(dev);
2275 u16 istatus, phystat;
2276
2277 if (!netif_running(dev))
2278 return;
2279
2280 spin_lock(&sky2->phy_lock);
2281 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
2282 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
2283
2284 netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n",
2285 istatus, phystat);
2286
2287 if (istatus & PHY_M_IS_AN_COMPL) {
2288 if (sky2_autoneg_done(sky2, phystat) == 0 &&
2289 !netif_carrier_ok(dev))
2290 sky2_link_up(sky2);
2291 goto out;
2292 }
2293
2294 if (istatus & PHY_M_IS_LSP_CHANGE)
2295 sky2->speed = sky2_phy_speed(hw, phystat);
2296
2297 if (istatus & PHY_M_IS_DUP_CHANGE)
2298 sky2->duplex =
2299 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2300
2301 if (istatus & PHY_M_IS_LST_CHANGE) {
2302 if (phystat & PHY_M_PS_LINK_UP)
2303 sky2_link_up(sky2);
2304 else
2305 sky2_link_down(sky2);
2306 }
2307 out:
2308 spin_unlock(&sky2->phy_lock);
2309 }
2310
2311 /* Special quick link interrupt (Yukon-2 Optima only) */
2312 static void sky2_qlink_intr(struct sky2_hw *hw)
2313 {
2314 struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
2315 u32 imask;
2316 u16 phy;
2317
2318 /* disable irq */
2319 imask = sky2_read32(hw, B0_IMSK);
2320 imask &= ~Y2_IS_PHY_QLNK;
2321 sky2_write32(hw, B0_IMSK, imask);
2322
2323 /* reset PHY Link Detect */
2324 phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
2325 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2326 sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
2327 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2328
2329 sky2_link_up(sky2);
2330 }
2331
2332 /* Transmit timeout is only called if we are running, carrier is up
2333 * and tx queue is full (stopped).
2334 */
2335 static void sky2_tx_timeout(struct net_device *dev)
2336 {
2337 struct sky2_port *sky2 = netdev_priv(dev);
2338 struct sky2_hw *hw = sky2->hw;
2339
2340 netif_err(sky2, timer, dev, "tx timeout\n");
2341
2342 netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
2343 sky2->tx_cons, sky2->tx_prod,
2344 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
2345 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
2346
2347 /* can't restart safely under softirq */
2348 schedule_work(&hw->restart_work);
2349 }
2350
2351 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
2352 {
2353 struct sky2_port *sky2 = netdev_priv(dev);
2354 struct sky2_hw *hw = sky2->hw;
2355 unsigned port = sky2->port;
2356 int err;
2357 u16 ctl, mode;
2358 u32 imask;
2359
2360 /* MTU size outside the spec */
2361 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
2362 return -EINVAL;
2363
2364 /* MTU > 1500 on yukon FE and FE+ not allowed */
2365 if (new_mtu > ETH_DATA_LEN &&
2366 (hw->chip_id == CHIP_ID_YUKON_FE ||
2367 hw->chip_id == CHIP_ID_YUKON_FE_P))
2368 return -EINVAL;
2369
2370 if (!netif_running(dev)) {
2371 dev->mtu = new_mtu;
2372 netdev_update_features(dev);
2373 return 0;
2374 }
2375
2376 imask = sky2_read32(hw, B0_IMSK);
2377 sky2_write32(hw, B0_IMSK, 0);
2378
2379 dev->trans_start = jiffies; /* prevent tx timeout */
2380 napi_disable(&hw->napi);
2381 netif_tx_disable(dev);
2382
2383 synchronize_irq(hw->pdev->irq);
2384
2385 if (!(hw->flags & SKY2_HW_RAM_BUFFER))
2386 sky2_set_tx_stfwd(hw, port);
2387
2388 ctl = gma_read16(hw, port, GM_GP_CTRL);
2389 gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
2390 sky2_rx_stop(sky2);
2391 sky2_rx_clean(sky2);
2392
2393 dev->mtu = new_mtu;
2394 netdev_update_features(dev);
2395
2396 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA;
2397 if (sky2->speed > SPEED_100)
2398 mode |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
2399 else
2400 mode |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
2401
2402 if (dev->mtu > ETH_DATA_LEN)
2403 mode |= GM_SMOD_JUMBO_ENA;
2404
2405 gma_write16(hw, port, GM_SERIAL_MODE, mode);
2406
2407 sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
2408
2409 err = sky2_alloc_rx_skbs(sky2);
2410 if (!err)
2411 sky2_rx_start(sky2);
2412 else
2413 sky2_rx_clean(sky2);
2414 sky2_write32(hw, B0_IMSK, imask);
2415
2416 sky2_read32(hw, B0_Y2_SP_LISR);
2417 napi_enable(&hw->napi);
2418
2419 if (err)
2420 dev_close(dev);
2421 else {
2422 gma_write16(hw, port, GM_GP_CTRL, ctl);
2423
2424 netif_wake_queue(dev);
2425 }
2426
2427 return err;
2428 }
2429
2430 /* For small just reuse existing skb for next receive */
2431 static struct sk_buff *receive_copy(struct sky2_port *sky2,
2432 const struct rx_ring_info *re,
2433 unsigned length)
2434 {
2435 struct sk_buff *skb;
2436
2437 skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
2438 if (likely(skb)) {
2439 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
2440 length, PCI_DMA_FROMDEVICE);
2441 skb_copy_from_linear_data(re->skb, skb->data, length);
2442 skb->ip_summed = re->skb->ip_summed;
2443 skb->csum = re->skb->csum;
2444 pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
2445 length, PCI_DMA_FROMDEVICE);
2446 re->skb->ip_summed = CHECKSUM_NONE;
2447 skb_put(skb, length);
2448 }
2449 return skb;
2450 }
2451
2452 /* Adjust length of skb with fragments to match received data */
2453 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
2454 unsigned int length)
2455 {
2456 int i, num_frags;
2457 unsigned int size;
2458
2459 /* put header into skb */
2460 size = min(length, hdr_space);
2461 skb->tail += size;
2462 skb->len += size;
2463 length -= size;
2464
2465 num_frags = skb_shinfo(skb)->nr_frags;
2466 for (i = 0; i < num_frags; i++) {
2467 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2468
2469 if (length == 0) {
2470 /* don't need this page */
2471 __skb_frag_unref(frag);
2472 --skb_shinfo(skb)->nr_frags;
2473 } else {
2474 size = min(length, (unsigned) PAGE_SIZE);
2475
2476 skb_frag_size_set(frag, size);
2477 skb->data_len += size;
2478 skb->truesize += PAGE_SIZE;
2479 skb->len += size;
2480 length -= size;
2481 }
2482 }
2483 }
2484
2485 /* Normal packet - take skb from ring element and put in a new one */
2486 static struct sk_buff *receive_new(struct sky2_port *sky2,
2487 struct rx_ring_info *re,
2488 unsigned int length)
2489 {
2490 struct sk_buff *skb;
2491 struct rx_ring_info nre;
2492 unsigned hdr_space = sky2->rx_data_size;
2493
2494 nre.skb = sky2_rx_alloc(sky2, GFP_ATOMIC);
2495 if (unlikely(!nre.skb))
2496 goto nobuf;
2497
2498 if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space))
2499 goto nomap;
2500
2501 skb = re->skb;
2502 sky2_rx_unmap_skb(sky2->hw->pdev, re);
2503 prefetch(skb->data);
2504 *re = nre;
2505
2506 if (skb_shinfo(skb)->nr_frags)
2507 skb_put_frags(skb, hdr_space, length);
2508 else
2509 skb_put(skb, length);
2510 return skb;
2511
2512 nomap:
2513 dev_kfree_skb(nre.skb);
2514 nobuf:
2515 return NULL;
2516 }
2517
2518 /*
2519 * Receive one packet.
2520 * For larger packets, get new buffer.
2521 */
2522 static struct sk_buff *sky2_receive(struct net_device *dev,
2523 u16 length, u32 status)
2524 {
2525 struct sky2_port *sky2 = netdev_priv(dev);
2526 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
2527 struct sk_buff *skb = NULL;
2528 u16 count = (status & GMR_FS_LEN) >> 16;
2529
2530 if (status & GMR_FS_VLAN)
2531 count -= VLAN_HLEN; /* Account for vlan tag */
2532
2533 netif_printk(sky2, rx_status, KERN_DEBUG, dev,
2534 "rx slot %u status 0x%x len %d\n",
2535 sky2->rx_next, status, length);
2536
2537 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
2538 prefetch(sky2->rx_ring + sky2->rx_next);
2539
2540 /* This chip has hardware problems that generates bogus status.
2541 * So do only marginal checking and expect higher level protocols
2542 * to handle crap frames.
2543 */
2544 if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
2545 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
2546 length != count)
2547 goto okay;
2548
2549 if (status & GMR_FS_ANY_ERR)
2550 goto error;
2551
2552 if (!(status & GMR_FS_RX_OK))
2553 goto resubmit;
2554
2555 /* if length reported by DMA does not match PHY, packet was truncated */
2556 if (length != count)
2557 goto error;
2558
2559 okay:
2560 if (length < copybreak)
2561 skb = receive_copy(sky2, re, length);
2562 else
2563 skb = receive_new(sky2, re, length);
2564
2565 dev->stats.rx_dropped += (skb == NULL);
2566
2567 resubmit:
2568 sky2_rx_submit(sky2, re);
2569
2570 return skb;
2571
2572 error:
2573 ++dev->stats.rx_errors;
2574
2575 if (net_ratelimit())
2576 netif_info(sky2, rx_err, dev,
2577 "rx error, status 0x%x length %d\n", status, length);
2578
2579 goto resubmit;
2580 }
2581
2582 /* Transmit complete */
2583 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2584 {
2585 struct sky2_port *sky2 = netdev_priv(dev);
2586
2587 if (netif_running(dev)) {
2588 sky2_tx_complete(sky2, last);
2589
2590 /* Wake unless it's detached, and called e.g. from sky2_down() */
2591 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
2592 netif_wake_queue(dev);
2593 }
2594 }
2595
2596 static inline void sky2_skb_rx(const struct sky2_port *sky2,
2597 u32 status, struct sk_buff *skb)
2598 {
2599 if (status & GMR_FS_VLAN)
2600 __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag));
2601
2602 if (skb->ip_summed == CHECKSUM_NONE)
2603 netif_receive_skb(skb);
2604 else
2605 napi_gro_receive(&sky2->hw->napi, skb);
2606 }
2607
2608 static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
2609 unsigned packets, unsigned bytes)
2610 {
2611 struct net_device *dev = hw->dev[port];
2612 struct sky2_port *sky2 = netdev_priv(dev);
2613
2614 if (packets == 0)
2615 return;
2616
2617 u64_stats_update_begin(&sky2->rx_stats.syncp);
2618 sky2->rx_stats.packets += packets;
2619 sky2->rx_stats.bytes += bytes;
2620 u64_stats_update_end(&sky2->rx_stats.syncp);
2621
2622 dev->last_rx = jiffies;
2623 sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
2624 }
2625
2626 static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
2627 {
2628 /* If this happens then driver assuming wrong format for chip type */
2629 BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE);
2630
2631 /* Both checksum counters are programmed to start at
2632 * the same offset, so unless there is a problem they
2633 * should match. This failure is an early indication that
2634 * hardware receive checksumming won't work.
2635 */
2636 if (likely((u16)(status >> 16) == (u16)status)) {
2637 struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb;
2638 skb->ip_summed = CHECKSUM_COMPLETE;
2639 skb->csum = le16_to_cpu(status);
2640 } else {
2641 dev_notice(&sky2->hw->pdev->dev,
2642 "%s: receive checksum problem (status = %#x)\n",
2643 sky2->netdev->name, status);
2644
2645 /* Disable checksum offload
2646 * It will be reenabled on next ndo_set_features, but if it's
2647 * really broken, will get disabled again
2648 */
2649 sky2->netdev->features &= ~NETIF_F_RXCSUM;
2650 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
2651 BMU_DIS_RX_CHKSUM);
2652 }
2653 }
2654
2655 static void sky2_rx_hash(struct sky2_port *sky2, u32 status)
2656 {
2657 struct sk_buff *skb;
2658
2659 skb = sky2->rx_ring[sky2->rx_next].skb;
2660 skb->rxhash = le32_to_cpu(status);
2661 }
2662
2663 /* Process status response ring */
2664 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
2665 {
2666 int work_done = 0;
2667 unsigned int total_bytes[2] = { 0 };
2668 unsigned int total_packets[2] = { 0 };
2669
2670 rmb();
2671 do {
2672 struct sky2_port *sky2;
2673 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2674 unsigned port;
2675 struct net_device *dev;
2676 struct sk_buff *skb;
2677 u32 status;
2678 u16 length;
2679 u8 opcode = le->opcode;
2680
2681 if (!(opcode & HW_OWNER))
2682 break;
2683
2684 hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size);
2685
2686 port = le->css & CSS_LINK_BIT;
2687 dev = hw->dev[port];
2688 sky2 = netdev_priv(dev);
2689 length = le16_to_cpu(le->length);
2690 status = le32_to_cpu(le->status);
2691
2692 le->opcode = 0;
2693 switch (opcode & ~HW_OWNER) {
2694 case OP_RXSTAT:
2695 total_packets[port]++;
2696 total_bytes[port] += length;
2697
2698 skb = sky2_receive(dev, length, status);
2699 if (!skb)
2700 break;
2701
2702 /* This chip reports checksum status differently */
2703 if (hw->flags & SKY2_HW_NEW_LE) {
2704 if ((dev->features & NETIF_F_RXCSUM) &&
2705 (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
2706 (le->css & CSS_TCPUDPCSOK))
2707 skb->ip_summed = CHECKSUM_UNNECESSARY;
2708 else
2709 skb->ip_summed = CHECKSUM_NONE;
2710 }
2711
2712 skb->protocol = eth_type_trans(skb, dev);
2713
2714 sky2_skb_rx(sky2, status, skb);
2715
2716 /* Stop after net poll weight */
2717 if (++work_done >= to_do)
2718 goto exit_loop;
2719 break;
2720
2721 case OP_RXVLAN:
2722 sky2->rx_tag = length;
2723 break;
2724
2725 case OP_RXCHKSVLAN:
2726 sky2->rx_tag = length;
2727 /* fall through */
2728 case OP_RXCHKS:
2729 if (likely(dev->features & NETIF_F_RXCSUM))
2730 sky2_rx_checksum(sky2, status);
2731 break;
2732
2733 case OP_RSS_HASH:
2734 sky2_rx_hash(sky2, status);
2735 break;
2736
2737 case OP_TXINDEXLE:
2738 /* TX index reports status for both ports */
2739 sky2_tx_done(hw->dev[0], status & 0xfff);
2740 if (hw->dev[1])
2741 sky2_tx_done(hw->dev[1],
2742 ((status >> 24) & 0xff)
2743 | (u16)(length & 0xf) << 8);
2744 break;
2745
2746 default:
2747 if (net_ratelimit())
2748 pr_warning("unknown status opcode 0x%x\n", opcode);
2749 }
2750 } while (hw->st_idx != idx);
2751
2752 /* Fully processed status ring so clear irq */
2753 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2754
2755 exit_loop:
2756 sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
2757 sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
2758
2759 return work_done;
2760 }
2761
2762 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2763 {
2764 struct net_device *dev = hw->dev[port];
2765
2766 if (net_ratelimit())
2767 netdev_info(dev, "hw error interrupt status 0x%x\n", status);
2768
2769 if (status & Y2_IS_PAR_RD1) {
2770 if (net_ratelimit())
2771 netdev_err(dev, "ram data read parity error\n");
2772 /* Clear IRQ */
2773 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2774 }
2775
2776 if (status & Y2_IS_PAR_WR1) {
2777 if (net_ratelimit())
2778 netdev_err(dev, "ram data write parity error\n");
2779
2780 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2781 }
2782
2783 if (status & Y2_IS_PAR_MAC1) {
2784 if (net_ratelimit())
2785 netdev_err(dev, "MAC parity error\n");
2786 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2787 }
2788
2789 if (status & Y2_IS_PAR_RX1) {
2790 if (net_ratelimit())
2791 netdev_err(dev, "RX parity error\n");
2792 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2793 }
2794
2795 if (status & Y2_IS_TCP_TXA1) {
2796 if (net_ratelimit())
2797 netdev_err(dev, "TCP segmentation error\n");
2798 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2799 }
2800 }
2801
2802 static void sky2_hw_intr(struct sky2_hw *hw)
2803 {
2804 struct pci_dev *pdev = hw->pdev;
2805 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2806 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2807
2808 status &= hwmsk;
2809
2810 if (status & Y2_IS_TIST_OV)
2811 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2812
2813 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2814 u16 pci_err;
2815
2816 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2817 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2818 if (net_ratelimit())
2819 dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
2820 pci_err);
2821
2822 sky2_pci_write16(hw, PCI_STATUS,
2823 pci_err | PCI_STATUS_ERROR_BITS);
2824 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2825 }
2826
2827 if (status & Y2_IS_PCI_EXP) {
2828 /* PCI-Express uncorrectable Error occurred */
2829 u32 err;
2830
2831 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2832 err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2833 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2834 0xfffffffful);
2835 if (net_ratelimit())
2836 dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
2837
2838 sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2839 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2840 }
2841
2842 if (status & Y2_HWE_L1_MASK)
2843 sky2_hw_error(hw, 0, status);
2844 status >>= 8;
2845 if (status & Y2_HWE_L1_MASK)
2846 sky2_hw_error(hw, 1, status);
2847 }
2848
2849 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2850 {
2851 struct net_device *dev = hw->dev[port];
2852 struct sky2_port *sky2 = netdev_priv(dev);
2853 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2854
2855 netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status);
2856
2857 if (status & GM_IS_RX_CO_OV)
2858 gma_read16(hw, port, GM_RX_IRQ_SRC);
2859
2860 if (status & GM_IS_TX_CO_OV)
2861 gma_read16(hw, port, GM_TX_IRQ_SRC);
2862
2863 if (status & GM_IS_RX_FF_OR) {
2864 ++dev->stats.rx_fifo_errors;
2865 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2866 }
2867
2868 if (status & GM_IS_TX_FF_UR) {
2869 ++dev->stats.tx_fifo_errors;
2870 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2871 }
2872 }
2873
2874 /* This should never happen it is a bug. */
2875 static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
2876 {
2877 struct net_device *dev = hw->dev[port];
2878 u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
2879
2880 dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
2881 dev->name, (unsigned) q, (unsigned) idx,
2882 (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
2883
2884 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
2885 }
2886
2887 static int sky2_rx_hung(struct net_device *dev)
2888 {
2889 struct sky2_port *sky2 = netdev_priv(dev);
2890 struct sky2_hw *hw = sky2->hw;
2891 unsigned port = sky2->port;
2892 unsigned rxq = rxqaddr[port];
2893 u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
2894 u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
2895 u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
2896 u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
2897
2898 /* If idle and MAC or PCI is stuck */
2899 if (sky2->check.last == dev->last_rx &&
2900 ((mac_rp == sky2->check.mac_rp &&
2901 mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
2902 /* Check if the PCI RX hang */
2903 (fifo_rp == sky2->check.fifo_rp &&
2904 fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
2905 netdev_printk(KERN_DEBUG, dev,
2906 "hung mac %d:%d fifo %d (%d:%d)\n",
2907 mac_lev, mac_rp, fifo_lev,
2908 fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
2909 return 1;
2910 } else {
2911 sky2->check.last = dev->last_rx;
2912 sky2->check.mac_rp = mac_rp;
2913 sky2->check.mac_lev = mac_lev;
2914 sky2->check.fifo_rp = fifo_rp;
2915 sky2->check.fifo_lev = fifo_lev;
2916 return 0;
2917 }
2918 }
2919
2920 static void sky2_watchdog(unsigned long arg)
2921 {
2922 struct sky2_hw *hw = (struct sky2_hw *) arg;
2923
2924 /* Check for lost IRQ once a second */
2925 if (sky2_read32(hw, B0_ISRC)) {
2926 napi_schedule(&hw->napi);
2927 } else {
2928 int i, active = 0;
2929
2930 for (i = 0; i < hw->ports; i++) {
2931 struct net_device *dev = hw->dev[i];
2932 if (!netif_running(dev))
2933 continue;
2934 ++active;
2935
2936 /* For chips with Rx FIFO, check if stuck */
2937 if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
2938 sky2_rx_hung(dev)) {
2939 netdev_info(dev, "receiver hang detected\n");
2940 schedule_work(&hw->restart_work);
2941 return;
2942 }
2943 }
2944
2945 if (active == 0)
2946 return;
2947 }
2948
2949 mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
2950 }
2951
2952 /* Hardware/software error handling */
2953 static void sky2_err_intr(struct sky2_hw *hw, u32 status)
2954 {
2955 if (net_ratelimit())
2956 dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
2957
2958 if (status & Y2_IS_HW_ERR)
2959 sky2_hw_intr(hw);
2960
2961 if (status & Y2_IS_IRQ_MAC1)
2962 sky2_mac_intr(hw, 0);
2963
2964 if (status & Y2_IS_IRQ_MAC2)
2965 sky2_mac_intr(hw, 1);
2966
2967 if (status & Y2_IS_CHK_RX1)
2968 sky2_le_error(hw, 0, Q_R1);
2969
2970 if (status & Y2_IS_CHK_RX2)
2971 sky2_le_error(hw, 1, Q_R2);
2972
2973 if (status & Y2_IS_CHK_TXA1)
2974 sky2_le_error(hw, 0, Q_XA1);
2975
2976 if (status & Y2_IS_CHK_TXA2)
2977 sky2_le_error(hw, 1, Q_XA2);
2978 }
2979
2980 static int sky2_poll(struct napi_struct *napi, int work_limit)
2981 {
2982 struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
2983 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
2984 int work_done = 0;
2985 u16 idx;
2986
2987 if (unlikely(status & Y2_IS_ERROR))
2988 sky2_err_intr(hw, status);
2989
2990 if (status & Y2_IS_IRQ_PHY1)
2991 sky2_phy_intr(hw, 0);
2992
2993 if (status & Y2_IS_IRQ_PHY2)
2994 sky2_phy_intr(hw, 1);
2995
2996 if (status & Y2_IS_PHY_QLNK)
2997 sky2_qlink_intr(hw);
2998
2999 while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
3000 work_done += sky2_status_intr(hw, work_limit - work_done, idx);
3001
3002 if (work_done >= work_limit)
3003 goto done;
3004 }
3005
3006 napi_complete(napi);
3007 sky2_read32(hw, B0_Y2_SP_LISR);
3008 done:
3009
3010 return work_done;
3011 }
3012
3013 static irqreturn_t sky2_intr(int irq, void *dev_id)
3014 {
3015 struct sky2_hw *hw = dev_id;
3016 u32 status;
3017
3018 /* Reading this mask interrupts as side effect */
3019 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
3020 if (status == 0 || status == ~0)
3021 return IRQ_NONE;
3022
3023 prefetch(&hw->st_le[hw->st_idx]);
3024
3025 napi_schedule(&hw->napi);
3026
3027 return IRQ_HANDLED;
3028 }
3029
3030 #ifdef CONFIG_NET_POLL_CONTROLLER
3031 static void sky2_netpoll(struct net_device *dev)
3032 {
3033 struct sky2_port *sky2 = netdev_priv(dev);
3034
3035 napi_schedule(&sky2->hw->napi);
3036 }
3037 #endif
3038
3039 /* Chip internal frequency for clock calculations */
3040 static u32 sky2_mhz(const struct sky2_hw *hw)
3041 {
3042 switch (hw->chip_id) {
3043 case CHIP_ID_YUKON_EC:
3044 case CHIP_ID_YUKON_EC_U:
3045 case CHIP_ID_YUKON_EX:
3046 case CHIP_ID_YUKON_SUPR:
3047 case CHIP_ID_YUKON_UL_2:
3048 case CHIP_ID_YUKON_OPT:
3049 case CHIP_ID_YUKON_PRM:
3050 case CHIP_ID_YUKON_OP_2:
3051 return 125;
3052
3053 case CHIP_ID_YUKON_FE:
3054 return 100;
3055
3056 case CHIP_ID_YUKON_FE_P:
3057 return 50;
3058
3059 case CHIP_ID_YUKON_XL:
3060 return 156;
3061
3062 default:
3063 BUG();
3064 }
3065 }
3066
3067 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
3068 {
3069 return sky2_mhz(hw) * us;
3070 }
3071
3072 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
3073 {
3074 return clk / sky2_mhz(hw);
3075 }
3076
3077
3078 static int __devinit sky2_init(struct sky2_hw *hw)
3079 {
3080 u8 t8;
3081
3082 /* Enable all clocks and check for bad PCI access */
3083 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
3084
3085 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3086
3087 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
3088 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
3089
3090 switch (hw->chip_id) {
3091 case CHIP_ID_YUKON_XL:
3092 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
3093 if (hw->chip_rev < CHIP_REV_YU_XL_A2)
3094 hw->flags |= SKY2_HW_RSS_BROKEN;
3095 break;
3096
3097 case CHIP_ID_YUKON_EC_U:
3098 hw->flags = SKY2_HW_GIGABIT
3099 | SKY2_HW_NEWER_PHY
3100 | SKY2_HW_ADV_POWER_CTL;
3101 break;
3102
3103 case CHIP_ID_YUKON_EX:
3104 hw->flags = SKY2_HW_GIGABIT
3105 | SKY2_HW_NEWER_PHY
3106 | SKY2_HW_NEW_LE
3107 | SKY2_HW_ADV_POWER_CTL
3108 | SKY2_HW_RSS_CHKSUM;
3109
3110 /* New transmit checksum */
3111 if (hw->chip_rev != CHIP_REV_YU_EX_B0)
3112 hw->flags |= SKY2_HW_AUTO_TX_SUM;
3113 break;
3114
3115 case CHIP_ID_YUKON_EC:
3116 /* This rev is really old, and requires untested workarounds */
3117 if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
3118 dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
3119 return -EOPNOTSUPP;
3120 }
3121 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN;
3122 break;
3123
3124 case CHIP_ID_YUKON_FE:
3125 hw->flags = SKY2_HW_RSS_BROKEN;
3126 break;
3127
3128 case CHIP_ID_YUKON_FE_P:
3129 hw->flags = SKY2_HW_NEWER_PHY
3130 | SKY2_HW_NEW_LE
3131 | SKY2_HW_AUTO_TX_SUM
3132 | SKY2_HW_ADV_POWER_CTL;
3133
3134 /* The workaround for status conflicts VLAN tag detection. */
3135 if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
3136 hw->flags |= SKY2_HW_VLAN_BROKEN | SKY2_HW_RSS_CHKSUM;
3137 break;
3138
3139 case CHIP_ID_YUKON_SUPR:
3140 hw->flags = SKY2_HW_GIGABIT
3141 | SKY2_HW_NEWER_PHY
3142 | SKY2_HW_NEW_LE
3143 | SKY2_HW_AUTO_TX_SUM
3144 | SKY2_HW_ADV_POWER_CTL;
3145
3146 if (hw->chip_rev == CHIP_REV_YU_SU_A0)
3147 hw->flags |= SKY2_HW_RSS_CHKSUM;
3148 break;
3149
3150 case CHIP_ID_YUKON_UL_2:
3151 hw->flags = SKY2_HW_GIGABIT
3152 | SKY2_HW_ADV_POWER_CTL;
3153 break;
3154
3155 case CHIP_ID_YUKON_OPT:
3156 case CHIP_ID_YUKON_PRM:
3157 case CHIP_ID_YUKON_OP_2:
3158 hw->flags = SKY2_HW_GIGABIT
3159 | SKY2_HW_NEW_LE
3160 | SKY2_HW_ADV_POWER_CTL;
3161 break;
3162
3163 default:
3164 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
3165 hw->chip_id);
3166 return -EOPNOTSUPP;
3167 }
3168
3169 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
3170 if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
3171 hw->flags |= SKY2_HW_FIBRE_PHY;
3172
3173 hw->ports = 1;
3174 t8 = sky2_read8(hw, B2_Y2_HW_RES);
3175 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
3176 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
3177 ++hw->ports;
3178 }
3179
3180 if (sky2_read8(hw, B2_E_0))
3181 hw->flags |= SKY2_HW_RAM_BUFFER;
3182
3183 return 0;
3184 }
3185
3186 static void sky2_reset(struct sky2_hw *hw)
3187 {
3188 struct pci_dev *pdev = hw->pdev;
3189 u16 status;
3190 int i;
3191 u32 hwe_mask = Y2_HWE_ALL_MASK;
3192
3193 /* disable ASF */
3194 if (hw->chip_id == CHIP_ID_YUKON_EX
3195 || hw->chip_id == CHIP_ID_YUKON_SUPR) {
3196 sky2_write32(hw, CPU_WDOG, 0);
3197 status = sky2_read16(hw, HCU_CCSR);
3198 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
3199 HCU_CCSR_UC_STATE_MSK);
3200 /*
3201 * CPU clock divider shouldn't be used because
3202 * - ASF firmware may malfunction
3203 * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks
3204 */
3205 status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK;
3206 sky2_write16(hw, HCU_CCSR, status);
3207 sky2_write32(hw, CPU_WDOG, 0);
3208 } else
3209 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
3210 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
3211
3212 /* do a SW reset */
3213 sky2_write8(hw, B0_CTST, CS_RST_SET);
3214 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3215
3216 /* allow writes to PCI config */
3217 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3218
3219 /* clear PCI errors, if any */
3220 status = sky2_pci_read16(hw, PCI_STATUS);
3221 status |= PCI_STATUS_ERROR_BITS;
3222 sky2_pci_write16(hw, PCI_STATUS, status);
3223
3224 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
3225
3226 if (pci_is_pcie(pdev)) {
3227 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
3228 0xfffffffful);
3229
3230 /* If error bit is stuck on ignore it */
3231 if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
3232 dev_info(&pdev->dev, "ignoring stuck error report bit\n");
3233 else
3234 hwe_mask |= Y2_IS_PCI_EXP;
3235 }
3236
3237 sky2_power_on(hw);
3238 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3239
3240 for (i = 0; i < hw->ports; i++) {
3241 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
3242 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
3243
3244 if (hw->chip_id == CHIP_ID_YUKON_EX ||
3245 hw->chip_id == CHIP_ID_YUKON_SUPR)
3246 sky2_write16(hw, SK_REG(i, GMAC_CTRL),
3247 GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
3248 | GMC_BYP_RETR_ON);
3249
3250 }
3251
3252 if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
3253 /* enable MACSec clock gating */
3254 sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
3255 }
3256
3257 if (hw->chip_id == CHIP_ID_YUKON_OPT ||
3258 hw->chip_id == CHIP_ID_YUKON_PRM ||
3259 hw->chip_id == CHIP_ID_YUKON_OP_2) {
3260 u16 reg;
3261 u32 msk;
3262
3263 if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
3264 /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
3265 sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
3266
3267 /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
3268 reg = 10;
3269
3270 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
3271 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
3272 } else {
3273 /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
3274 reg = 3;
3275 }
3276
3277 reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
3278 reg |= PSM_CONFIG_REG4_RST_PHY_LINK_DETECT;
3279
3280 /* reset PHY Link Detect */
3281 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3282 sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
3283
3284 /* enable PHY Quick Link */
3285 msk = sky2_read32(hw, B0_IMSK);
3286 msk |= Y2_IS_PHY_QLNK;
3287 sky2_write32(hw, B0_IMSK, msk);
3288
3289 /* check if PSMv2 was running before */
3290 reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
3291 if (reg & PCI_EXP_LNKCTL_ASPMC)
3292 /* restore the PCIe Link Control register */
3293 sky2_pci_write16(hw, pdev->pcie_cap + PCI_EXP_LNKCTL,
3294 reg);
3295
3296 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3297
3298 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
3299 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
3300 }
3301
3302 /* Clear I2C IRQ noise */
3303 sky2_write32(hw, B2_I2C_IRQ, 1);
3304
3305 /* turn off hardware timer (unused) */
3306 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
3307 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
3308
3309 /* Turn off descriptor polling */
3310 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
3311
3312 /* Turn off receive timestamp */
3313 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
3314 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
3315
3316 /* enable the Tx Arbiters */
3317 for (i = 0; i < hw->ports; i++)
3318 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
3319
3320 /* Initialize ram interface */
3321 for (i = 0; i < hw->ports; i++) {
3322 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
3323
3324 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
3325 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
3326 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
3327 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
3328 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
3329 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
3330 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
3331 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
3332 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
3333 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
3334 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
3335 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
3336 }
3337
3338 sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
3339
3340 for (i = 0; i < hw->ports; i++)
3341 sky2_gmac_reset(hw, i);
3342
3343 memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le));
3344 hw->st_idx = 0;
3345
3346 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
3347 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
3348
3349 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
3350 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
3351
3352 /* Set the list last index */
3353 sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1);
3354
3355 sky2_write16(hw, STAT_TX_IDX_TH, 10);
3356 sky2_write8(hw, STAT_FIFO_WM, 16);
3357
3358 /* set Status-FIFO ISR watermark */
3359 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
3360 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
3361 else
3362 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
3363
3364 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
3365 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
3366 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
3367
3368 /* enable status unit */
3369 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
3370
3371 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3372 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3373 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3374 }
3375
3376 /* Take device down (offline).
3377 * Equivalent to doing dev_stop() but this does not
3378 * inform upper layers of the transition.
3379 */
3380 static void sky2_detach(struct net_device *dev)
3381 {
3382 if (netif_running(dev)) {
3383 netif_tx_lock(dev);
3384 netif_device_detach(dev); /* stop txq */
3385 netif_tx_unlock(dev);
3386 sky2_down(dev);
3387 }
3388 }
3389
3390 /* Bring device back after doing sky2_detach */
3391 static int sky2_reattach(struct net_device *dev)
3392 {
3393 int err = 0;
3394
3395 if (netif_running(dev)) {
3396 err = sky2_up(dev);
3397 if (err) {
3398 netdev_info(dev, "could not restart %d\n", err);
3399 dev_close(dev);
3400 } else {
3401 netif_device_attach(dev);
3402 sky2_set_multicast(dev);
3403 }
3404 }
3405
3406 return err;
3407 }
3408
3409 static void sky2_all_down(struct sky2_hw *hw)
3410 {
3411 int i;
3412
3413 sky2_read32(hw, B0_IMSK);
3414 sky2_write32(hw, B0_IMSK, 0);
3415 synchronize_irq(hw->pdev->irq);
3416 napi_disable(&hw->napi);
3417
3418 for (i = 0; i < hw->ports; i++) {
3419 struct net_device *dev = hw->dev[i];
3420 struct sky2_port *sky2 = netdev_priv(dev);
3421
3422 if (!netif_running(dev))
3423 continue;
3424
3425 netif_carrier_off(dev);
3426 netif_tx_disable(dev);
3427 sky2_hw_down(sky2);
3428 }
3429 }
3430
3431 static void sky2_all_up(struct sky2_hw *hw)
3432 {
3433 u32 imask = Y2_IS_BASE;
3434 int i;
3435
3436 for (i = 0; i < hw->ports; i++) {
3437 struct net_device *dev = hw->dev[i];
3438 struct sky2_port *sky2 = netdev_priv(dev);
3439
3440 if (!netif_running(dev))
3441 continue;
3442
3443 sky2_hw_up(sky2);
3444 sky2_set_multicast(dev);
3445 imask |= portirq_msk[i];
3446 netif_wake_queue(dev);
3447 }
3448
3449 sky2_write32(hw, B0_IMSK, imask);
3450 sky2_read32(hw, B0_IMSK);
3451
3452 sky2_read32(hw, B0_Y2_SP_LISR);
3453 napi_enable(&hw->napi);
3454 }
3455
3456 static void sky2_restart(struct work_struct *work)
3457 {
3458 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
3459
3460 rtnl_lock();
3461
3462 sky2_all_down(hw);
3463 sky2_reset(hw);
3464 sky2_all_up(hw);
3465
3466 rtnl_unlock();
3467 }
3468
3469 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
3470 {
3471 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
3472 }
3473
3474 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3475 {
3476 const struct sky2_port *sky2 = netdev_priv(dev);
3477
3478 wol->supported = sky2_wol_supported(sky2->hw);
3479 wol->wolopts = sky2->wol;
3480 }
3481
3482 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3483 {
3484 struct sky2_port *sky2 = netdev_priv(dev);
3485 struct sky2_hw *hw = sky2->hw;
3486 bool enable_wakeup = false;
3487 int i;
3488
3489 if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
3490 !device_can_wakeup(&hw->pdev->dev))
3491 return -EOPNOTSUPP;
3492
3493 sky2->wol = wol->wolopts;
3494
3495 for (i = 0; i < hw->ports; i++) {
3496 struct net_device *dev = hw->dev[i];
3497 struct sky2_port *sky2 = netdev_priv(dev);
3498
3499 if (sky2->wol)
3500 enable_wakeup = true;
3501 }
3502 device_set_wakeup_enable(&hw->pdev->dev, enable_wakeup);
3503
3504 return 0;
3505 }
3506
3507 static u32 sky2_supported_modes(const struct sky2_hw *hw)
3508 {
3509 if (sky2_is_copper(hw)) {
3510 u32 modes = SUPPORTED_10baseT_Half
3511 | SUPPORTED_10baseT_Full
3512 | SUPPORTED_100baseT_Half
3513 | SUPPORTED_100baseT_Full;
3514
3515 if (hw->flags & SKY2_HW_GIGABIT)
3516 modes |= SUPPORTED_1000baseT_Half
3517 | SUPPORTED_1000baseT_Full;
3518 return modes;
3519 } else
3520 return SUPPORTED_1000baseT_Half
3521 | SUPPORTED_1000baseT_Full;
3522 }
3523
3524 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3525 {
3526 struct sky2_port *sky2 = netdev_priv(dev);
3527 struct sky2_hw *hw = sky2->hw;
3528
3529 ecmd->transceiver = XCVR_INTERNAL;
3530 ecmd->supported = sky2_supported_modes(hw);
3531 ecmd->phy_address = PHY_ADDR_MARV;
3532 if (sky2_is_copper(hw)) {
3533 ecmd->port = PORT_TP;
3534 ethtool_cmd_speed_set(ecmd, sky2->speed);
3535 ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
3536 } else {
3537 ethtool_cmd_speed_set(ecmd, SPEED_1000);
3538 ecmd->port = PORT_FIBRE;
3539 ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
3540 }
3541
3542 ecmd->advertising = sky2->advertising;
3543 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
3544 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
3545 ecmd->duplex = sky2->duplex;
3546 return 0;
3547 }
3548
3549 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3550 {
3551 struct sky2_port *sky2 = netdev_priv(dev);
3552 const struct sky2_hw *hw = sky2->hw;
3553 u32 supported = sky2_supported_modes(hw);
3554
3555 if (ecmd->autoneg == AUTONEG_ENABLE) {
3556 if (ecmd->advertising & ~supported)
3557 return -EINVAL;
3558
3559 if (sky2_is_copper(hw))
3560 sky2->advertising = ecmd->advertising |
3561 ADVERTISED_TP |
3562 ADVERTISED_Autoneg;
3563 else
3564 sky2->advertising = ecmd->advertising |
3565 ADVERTISED_FIBRE |
3566 ADVERTISED_Autoneg;
3567
3568 sky2->flags |= SKY2_FLAG_AUTO_SPEED;
3569 sky2->duplex = -1;
3570 sky2->speed = -1;
3571 } else {
3572 u32 setting;
3573 u32 speed = ethtool_cmd_speed(ecmd);
3574
3575 switch (speed) {
3576 case SPEED_1000:
3577 if (ecmd->duplex == DUPLEX_FULL)
3578 setting = SUPPORTED_1000baseT_Full;
3579 else if (ecmd->duplex == DUPLEX_HALF)
3580 setting = SUPPORTED_1000baseT_Half;
3581 else
3582 return -EINVAL;
3583 break;
3584 case SPEED_100:
3585 if (ecmd->duplex == DUPLEX_FULL)
3586 setting = SUPPORTED_100baseT_Full;
3587 else if (ecmd->duplex == DUPLEX_HALF)
3588 setting = SUPPORTED_100baseT_Half;
3589 else
3590 return -EINVAL;
3591 break;
3592
3593 case SPEED_10:
3594 if (ecmd->duplex == DUPLEX_FULL)
3595 setting = SUPPORTED_10baseT_Full;
3596 else if (ecmd->duplex == DUPLEX_HALF)
3597 setting = SUPPORTED_10baseT_Half;
3598 else
3599 return -EINVAL;
3600 break;
3601 default:
3602 return -EINVAL;
3603 }
3604
3605 if ((setting & supported) == 0)
3606 return -EINVAL;
3607
3608 sky2->speed = speed;
3609 sky2->duplex = ecmd->duplex;
3610 sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
3611 }
3612
3613 if (netif_running(dev)) {
3614 sky2_phy_reinit(sky2);
3615 sky2_set_multicast(dev);
3616 }
3617
3618 return 0;
3619 }
3620
3621 static void sky2_get_drvinfo(struct net_device *dev,
3622 struct ethtool_drvinfo *info)
3623 {
3624 struct sky2_port *sky2 = netdev_priv(dev);
3625
3626 strcpy(info->driver, DRV_NAME);
3627 strcpy(info->version, DRV_VERSION);
3628 strcpy(info->fw_version, "N/A");
3629 strcpy(info->bus_info, pci_name(sky2->hw->pdev));
3630 }
3631
3632 static const struct sky2_stat {
3633 char name[ETH_GSTRING_LEN];
3634 u16 offset;
3635 } sky2_stats[] = {
3636 { "tx_bytes", GM_TXO_OK_HI },
3637 { "rx_bytes", GM_RXO_OK_HI },
3638 { "tx_broadcast", GM_TXF_BC_OK },
3639 { "rx_broadcast", GM_RXF_BC_OK },
3640 { "tx_multicast", GM_TXF_MC_OK },
3641 { "rx_multicast", GM_RXF_MC_OK },
3642 { "tx_unicast", GM_TXF_UC_OK },
3643 { "rx_unicast", GM_RXF_UC_OK },
3644 { "tx_mac_pause", GM_TXF_MPAUSE },
3645 { "rx_mac_pause", GM_RXF_MPAUSE },
3646 { "collisions", GM_TXF_COL },
3647 { "late_collision",GM_TXF_LAT_COL },
3648 { "aborted", GM_TXF_ABO_COL },
3649 { "single_collisions", GM_TXF_SNG_COL },
3650 { "multi_collisions", GM_TXF_MUL_COL },
3651
3652 { "rx_short", GM_RXF_SHT },
3653 { "rx_runt", GM_RXE_FRAG },
3654 { "rx_64_byte_packets", GM_RXF_64B },
3655 { "rx_65_to_127_byte_packets", GM_RXF_127B },
3656 { "rx_128_to_255_byte_packets", GM_RXF_255B },
3657 { "rx_256_to_511_byte_packets", GM_RXF_511B },
3658 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
3659 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
3660 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
3661 { "rx_too_long", GM_RXF_LNG_ERR },
3662 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
3663 { "rx_jabber", GM_RXF_JAB_PKT },
3664 { "rx_fcs_error", GM_RXF_FCS_ERR },
3665
3666 { "tx_64_byte_packets", GM_TXF_64B },
3667 { "tx_65_to_127_byte_packets", GM_TXF_127B },
3668 { "tx_128_to_255_byte_packets", GM_TXF_255B },
3669 { "tx_256_to_511_byte_packets", GM_TXF_511B },
3670 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
3671 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
3672 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
3673 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
3674 };
3675
3676 static u32 sky2_get_msglevel(struct net_device *netdev)
3677 {
3678 struct sky2_port *sky2 = netdev_priv(netdev);
3679 return sky2->msg_enable;
3680 }
3681
3682 static int sky2_nway_reset(struct net_device *dev)
3683 {
3684 struct sky2_port *sky2 = netdev_priv(dev);
3685
3686 if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED))
3687 return -EINVAL;
3688
3689 sky2_phy_reinit(sky2);
3690 sky2_set_multicast(dev);
3691
3692 return 0;
3693 }
3694
3695 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
3696 {
3697 struct sky2_hw *hw = sky2->hw;
3698 unsigned port = sky2->port;
3699 int i;
3700
3701 data[0] = get_stats64(hw, port, GM_TXO_OK_LO);
3702 data[1] = get_stats64(hw, port, GM_RXO_OK_LO);
3703
3704 for (i = 2; i < count; i++)
3705 data[i] = get_stats32(hw, port, sky2_stats[i].offset);
3706 }
3707
3708 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
3709 {
3710 struct sky2_port *sky2 = netdev_priv(netdev);
3711 sky2->msg_enable = value;
3712 }
3713
3714 static int sky2_get_sset_count(struct net_device *dev, int sset)
3715 {
3716 switch (sset) {
3717 case ETH_SS_STATS:
3718 return ARRAY_SIZE(sky2_stats);
3719 default:
3720 return -EOPNOTSUPP;
3721 }
3722 }
3723
3724 static void sky2_get_ethtool_stats(struct net_device *dev,
3725 struct ethtool_stats *stats, u64 * data)
3726 {
3727 struct sky2_port *sky2 = netdev_priv(dev);
3728
3729 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
3730 }
3731
3732 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
3733 {
3734 int i;
3735
3736 switch (stringset) {
3737 case ETH_SS_STATS:
3738 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
3739 memcpy(data + i * ETH_GSTRING_LEN,
3740 sky2_stats[i].name, ETH_GSTRING_LEN);
3741 break;
3742 }
3743 }
3744
3745 static int sky2_set_mac_address(struct net_device *dev, void *p)
3746 {
3747 struct sky2_port *sky2 = netdev_priv(dev);
3748 struct sky2_hw *hw = sky2->hw;
3749 unsigned port = sky2->port;
3750 const struct sockaddr *addr = p;
3751
3752 if (!is_valid_ether_addr(addr->sa_data))
3753 return -EADDRNOTAVAIL;
3754
3755 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
3756 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
3757 dev->dev_addr, ETH_ALEN);
3758 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
3759 dev->dev_addr, ETH_ALEN);
3760
3761 /* virtual address for data */
3762 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
3763
3764 /* physical address: used for pause frames */
3765 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
3766
3767 return 0;
3768 }
3769
3770 static inline void sky2_add_filter(u8 filter[8], const u8 *addr)
3771 {
3772 u32 bit;
3773
3774 bit = ether_crc(ETH_ALEN, addr) & 63;
3775 filter[bit >> 3] |= 1 << (bit & 7);
3776 }
3777
3778 static void sky2_set_multicast(struct net_device *dev)
3779 {
3780 struct sky2_port *sky2 = netdev_priv(dev);
3781 struct sky2_hw *hw = sky2->hw;
3782 unsigned port = sky2->port;
3783 struct netdev_hw_addr *ha;
3784 u16 reg;
3785 u8 filter[8];
3786 int rx_pause;
3787 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
3788
3789 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
3790 memset(filter, 0, sizeof(filter));
3791
3792 reg = gma_read16(hw, port, GM_RX_CTRL);
3793 reg |= GM_RXCR_UCF_ENA;
3794
3795 if (dev->flags & IFF_PROMISC) /* promiscuous */
3796 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
3797 else if (dev->flags & IFF_ALLMULTI)
3798 memset(filter, 0xff, sizeof(filter));
3799 else if (netdev_mc_empty(dev) && !rx_pause)
3800 reg &= ~GM_RXCR_MCF_ENA;
3801 else {
3802 reg |= GM_RXCR_MCF_ENA;
3803
3804 if (rx_pause)
3805 sky2_add_filter(filter, pause_mc_addr);
3806
3807 netdev_for_each_mc_addr(ha, dev)
3808 sky2_add_filter(filter, ha->addr);
3809 }
3810
3811 gma_write16(hw, port, GM_MC_ADDR_H1,
3812 (u16) filter[0] | ((u16) filter[1] << 8));
3813 gma_write16(hw, port, GM_MC_ADDR_H2,
3814 (u16) filter[2] | ((u16) filter[3] << 8));
3815 gma_write16(hw, port, GM_MC_ADDR_H3,
3816 (u16) filter[4] | ((u16) filter[5] << 8));
3817 gma_write16(hw, port, GM_MC_ADDR_H4,
3818 (u16) filter[6] | ((u16) filter[7] << 8));
3819
3820 gma_write16(hw, port, GM_RX_CTRL, reg);
3821 }
3822
3823 static struct rtnl_link_stats64 *sky2_get_stats(struct net_device *dev,
3824 struct rtnl_link_stats64 *stats)
3825 {
3826 struct sky2_port *sky2 = netdev_priv(dev);
3827 struct sky2_hw *hw = sky2->hw;
3828 unsigned port = sky2->port;
3829 unsigned int start;
3830 u64 _bytes, _packets;
3831
3832 do {
3833 start = u64_stats_fetch_begin_bh(&sky2->rx_stats.syncp);
3834 _bytes = sky2->rx_stats.bytes;
3835 _packets = sky2->rx_stats.packets;
3836 } while (u64_stats_fetch_retry_bh(&sky2->rx_stats.syncp, start));
3837
3838 stats->rx_packets = _packets;
3839 stats->rx_bytes = _bytes;
3840
3841 do {
3842 start = u64_stats_fetch_begin_bh(&sky2->tx_stats.syncp);
3843 _bytes = sky2->tx_stats.bytes;
3844 _packets = sky2->tx_stats.packets;
3845 } while (u64_stats_fetch_retry_bh(&sky2->tx_stats.syncp, start));
3846
3847 stats->tx_packets = _packets;
3848 stats->tx_bytes = _bytes;
3849
3850 stats->multicast = get_stats32(hw, port, GM_RXF_MC_OK)
3851 + get_stats32(hw, port, GM_RXF_BC_OK);
3852
3853 stats->collisions = get_stats32(hw, port, GM_TXF_COL);
3854
3855 stats->rx_length_errors = get_stats32(hw, port, GM_RXF_LNG_ERR);
3856 stats->rx_crc_errors = get_stats32(hw, port, GM_RXF_FCS_ERR);
3857 stats->rx_frame_errors = get_stats32(hw, port, GM_RXF_SHT)
3858 + get_stats32(hw, port, GM_RXE_FRAG);
3859 stats->rx_over_errors = get_stats32(hw, port, GM_RXE_FIFO_OV);
3860
3861 stats->rx_dropped = dev->stats.rx_dropped;
3862 stats->rx_fifo_errors = dev->stats.rx_fifo_errors;
3863 stats->tx_fifo_errors = dev->stats.tx_fifo_errors;
3864
3865 return stats;
3866 }
3867
3868 /* Can have one global because blinking is controlled by
3869 * ethtool and that is always under RTNL mutex
3870 */
3871 static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
3872 {
3873 struct sky2_hw *hw = sky2->hw;
3874 unsigned port = sky2->port;
3875
3876 spin_lock_bh(&sky2->phy_lock);
3877 if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
3878 hw->chip_id == CHIP_ID_YUKON_EX ||
3879 hw->chip_id == CHIP_ID_YUKON_SUPR) {
3880 u16 pg;
3881 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3882 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3883
3884 switch (mode) {
3885 case MO_LED_OFF:
3886 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3887 PHY_M_LEDC_LOS_CTRL(8) |
3888 PHY_M_LEDC_INIT_CTRL(8) |
3889 PHY_M_LEDC_STA1_CTRL(8) |
3890 PHY_M_LEDC_STA0_CTRL(8));
3891 break;
3892 case MO_LED_ON:
3893 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3894 PHY_M_LEDC_LOS_CTRL(9) |
3895 PHY_M_LEDC_INIT_CTRL(9) |
3896 PHY_M_LEDC_STA1_CTRL(9) |
3897 PHY_M_LEDC_STA0_CTRL(9));
3898 break;
3899 case MO_LED_BLINK:
3900 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3901 PHY_M_LEDC_LOS_CTRL(0xa) |
3902 PHY_M_LEDC_INIT_CTRL(0xa) |
3903 PHY_M_LEDC_STA1_CTRL(0xa) |
3904 PHY_M_LEDC_STA0_CTRL(0xa));
3905 break;
3906 case MO_LED_NORM:
3907 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3908 PHY_M_LEDC_LOS_CTRL(1) |
3909 PHY_M_LEDC_INIT_CTRL(8) |
3910 PHY_M_LEDC_STA1_CTRL(7) |
3911 PHY_M_LEDC_STA0_CTRL(7));
3912 }
3913
3914 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3915 } else
3916 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
3917 PHY_M_LED_MO_DUP(mode) |
3918 PHY_M_LED_MO_10(mode) |
3919 PHY_M_LED_MO_100(mode) |
3920 PHY_M_LED_MO_1000(mode) |
3921 PHY_M_LED_MO_RX(mode) |
3922 PHY_M_LED_MO_TX(mode));
3923
3924 spin_unlock_bh(&sky2->phy_lock);
3925 }
3926
3927 /* blink LED's for finding board */
3928 static int sky2_set_phys_id(struct net_device *dev,
3929 enum ethtool_phys_id_state state)
3930 {
3931 struct sky2_port *sky2 = netdev_priv(dev);
3932
3933 switch (state) {
3934 case ETHTOOL_ID_ACTIVE:
3935 return 1; /* cycle on/off once per second */
3936 case ETHTOOL_ID_INACTIVE:
3937 sky2_led(sky2, MO_LED_NORM);
3938 break;
3939 case ETHTOOL_ID_ON:
3940 sky2_led(sky2, MO_LED_ON);
3941 break;
3942 case ETHTOOL_ID_OFF:
3943 sky2_led(sky2, MO_LED_OFF);
3944 break;
3945 }
3946
3947 return 0;
3948 }
3949
3950 static void sky2_get_pauseparam(struct net_device *dev,
3951 struct ethtool_pauseparam *ecmd)
3952 {
3953 struct sky2_port *sky2 = netdev_priv(dev);
3954
3955 switch (sky2->flow_mode) {
3956 case FC_NONE:
3957 ecmd->tx_pause = ecmd->rx_pause = 0;
3958 break;
3959 case FC_TX:
3960 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
3961 break;
3962 case FC_RX:
3963 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
3964 break;
3965 case FC_BOTH:
3966 ecmd->tx_pause = ecmd->rx_pause = 1;
3967 }
3968
3969 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE)
3970 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
3971 }
3972
3973 static int sky2_set_pauseparam(struct net_device *dev,
3974 struct ethtool_pauseparam *ecmd)
3975 {
3976 struct sky2_port *sky2 = netdev_priv(dev);
3977
3978 if (ecmd->autoneg == AUTONEG_ENABLE)
3979 sky2->flags |= SKY2_FLAG_AUTO_PAUSE;
3980 else
3981 sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE;
3982
3983 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
3984
3985 if (netif_running(dev))
3986 sky2_phy_reinit(sky2);
3987
3988 return 0;
3989 }
3990
3991 static int sky2_get_coalesce(struct net_device *dev,
3992 struct ethtool_coalesce *ecmd)
3993 {
3994 struct sky2_port *sky2 = netdev_priv(dev);
3995 struct sky2_hw *hw = sky2->hw;
3996
3997 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
3998 ecmd->tx_coalesce_usecs = 0;
3999 else {
4000 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
4001 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
4002 }
4003 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
4004
4005 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
4006 ecmd->rx_coalesce_usecs = 0;
4007 else {
4008 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
4009 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
4010 }
4011 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
4012
4013 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
4014 ecmd->rx_coalesce_usecs_irq = 0;
4015 else {
4016 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
4017 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
4018 }
4019
4020 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
4021
4022 return 0;
4023 }
4024
4025 /* Note: this affect both ports */
4026 static int sky2_set_coalesce(struct net_device *dev,
4027 struct ethtool_coalesce *ecmd)
4028 {
4029 struct sky2_port *sky2 = netdev_priv(dev);
4030 struct sky2_hw *hw = sky2->hw;
4031 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
4032
4033 if (ecmd->tx_coalesce_usecs > tmax ||
4034 ecmd->rx_coalesce_usecs > tmax ||
4035 ecmd->rx_coalesce_usecs_irq > tmax)
4036 return -EINVAL;
4037
4038 if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1)
4039 return -EINVAL;
4040 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
4041 return -EINVAL;
4042 if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING)
4043 return -EINVAL;
4044
4045 if (ecmd->tx_coalesce_usecs == 0)
4046 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
4047 else {
4048 sky2_write32(hw, STAT_TX_TIMER_INI,
4049 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
4050 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
4051 }
4052 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
4053
4054 if (ecmd->rx_coalesce_usecs == 0)
4055 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
4056 else {
4057 sky2_write32(hw, STAT_LEV_TIMER_INI,
4058 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
4059 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
4060 }
4061 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
4062
4063 if (ecmd->rx_coalesce_usecs_irq == 0)
4064 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
4065 else {
4066 sky2_write32(hw, STAT_ISR_TIMER_INI,
4067 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
4068 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
4069 }
4070 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
4071 return 0;
4072 }
4073
4074 static void sky2_get_ringparam(struct net_device *dev,
4075 struct ethtool_ringparam *ering)
4076 {
4077 struct sky2_port *sky2 = netdev_priv(dev);
4078
4079 ering->rx_max_pending = RX_MAX_PENDING;
4080 ering->tx_max_pending = TX_MAX_PENDING;
4081
4082 ering->rx_pending = sky2->rx_pending;
4083 ering->tx_pending = sky2->tx_pending;
4084 }
4085
4086 static int sky2_set_ringparam(struct net_device *dev,
4087 struct ethtool_ringparam *ering)
4088 {
4089 struct sky2_port *sky2 = netdev_priv(dev);
4090
4091 if (ering->rx_pending > RX_MAX_PENDING ||
4092 ering->rx_pending < 8 ||
4093 ering->tx_pending < TX_MIN_PENDING ||
4094 ering->tx_pending > TX_MAX_PENDING)
4095 return -EINVAL;
4096
4097 sky2_detach(dev);
4098
4099 sky2->rx_pending = ering->rx_pending;
4100 sky2->tx_pending = ering->tx_pending;
4101 sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
4102
4103 return sky2_reattach(dev);
4104 }
4105
4106 static int sky2_get_regs_len(struct net_device *dev)
4107 {
4108 return 0x4000;
4109 }
4110
4111 static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b)
4112 {
4113 /* This complicated switch statement is to make sure and
4114 * only access regions that are unreserved.
4115 * Some blocks are only valid on dual port cards.
4116 */
4117 switch (b) {
4118 /* second port */
4119 case 5: /* Tx Arbiter 2 */
4120 case 9: /* RX2 */
4121 case 14 ... 15: /* TX2 */
4122 case 17: case 19: /* Ram Buffer 2 */
4123 case 22 ... 23: /* Tx Ram Buffer 2 */
4124 case 25: /* Rx MAC Fifo 1 */
4125 case 27: /* Tx MAC Fifo 2 */
4126 case 31: /* GPHY 2 */
4127 case 40 ... 47: /* Pattern Ram 2 */
4128 case 52: case 54: /* TCP Segmentation 2 */
4129 case 112 ... 116: /* GMAC 2 */
4130 return hw->ports > 1;
4131
4132 case 0: /* Control */
4133 case 2: /* Mac address */
4134 case 4: /* Tx Arbiter 1 */
4135 case 7: /* PCI express reg */
4136 case 8: /* RX1 */
4137 case 12 ... 13: /* TX1 */
4138 case 16: case 18:/* Rx Ram Buffer 1 */
4139 case 20 ... 21: /* Tx Ram Buffer 1 */
4140 case 24: /* Rx MAC Fifo 1 */
4141 case 26: /* Tx MAC Fifo 1 */
4142 case 28 ... 29: /* Descriptor and status unit */
4143 case 30: /* GPHY 1*/
4144 case 32 ... 39: /* Pattern Ram 1 */
4145 case 48: case 50: /* TCP Segmentation 1 */
4146 case 56 ... 60: /* PCI space */
4147 case 80 ... 84: /* GMAC 1 */
4148 return 1;
4149
4150 default:
4151 return 0;
4152 }
4153 }
4154
4155 /*
4156 * Returns copy of control register region
4157 * Note: ethtool_get_regs always provides full size (16k) buffer
4158 */
4159 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
4160 void *p)
4161 {
4162 const struct sky2_port *sky2 = netdev_priv(dev);
4163 const void __iomem *io = sky2->hw->regs;
4164 unsigned int b;
4165
4166 regs->version = 1;
4167
4168 for (b = 0; b < 128; b++) {
4169 /* skip poisonous diagnostic ram region in block 3 */
4170 if (b == 3)
4171 memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
4172 else if (sky2_reg_access_ok(sky2->hw, b))
4173 memcpy_fromio(p, io, 128);
4174 else
4175 memset(p, 0, 128);
4176
4177 p += 128;
4178 io += 128;
4179 }
4180 }
4181
4182 static int sky2_get_eeprom_len(struct net_device *dev)
4183 {
4184 struct sky2_port *sky2 = netdev_priv(dev);
4185 struct sky2_hw *hw = sky2->hw;
4186 u16 reg2;
4187
4188 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
4189 return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
4190 }
4191
4192 static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
4193 {
4194 unsigned long start = jiffies;
4195
4196 while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
4197 /* Can take up to 10.6 ms for write */
4198 if (time_after(jiffies, start + HZ/4)) {
4199 dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
4200 return -ETIMEDOUT;
4201 }
4202 mdelay(1);
4203 }
4204
4205 return 0;
4206 }
4207
4208 static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data,
4209 u16 offset, size_t length)
4210 {
4211 int rc = 0;
4212
4213 while (length > 0) {
4214 u32 val;
4215
4216 sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
4217 rc = sky2_vpd_wait(hw, cap, 0);
4218 if (rc)
4219 break;
4220
4221 val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
4222
4223 memcpy(data, &val, min(sizeof(val), length));
4224 offset += sizeof(u32);
4225 data += sizeof(u32);
4226 length -= sizeof(u32);
4227 }
4228
4229 return rc;
4230 }
4231
4232 static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data,
4233 u16 offset, unsigned int length)
4234 {
4235 unsigned int i;
4236 int rc = 0;
4237
4238 for (i = 0; i < length; i += sizeof(u32)) {
4239 u32 val = *(u32 *)(data + i);
4240
4241 sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
4242 sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
4243
4244 rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F);
4245 if (rc)
4246 break;
4247 }
4248 return rc;
4249 }
4250
4251 static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4252 u8 *data)
4253 {
4254 struct sky2_port *sky2 = netdev_priv(dev);
4255 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
4256
4257 if (!cap)
4258 return -EINVAL;
4259
4260 eeprom->magic = SKY2_EEPROM_MAGIC;
4261
4262 return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len);
4263 }
4264
4265 static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4266 u8 *data)
4267 {
4268 struct sky2_port *sky2 = netdev_priv(dev);
4269 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
4270
4271 if (!cap)
4272 return -EINVAL;
4273
4274 if (eeprom->magic != SKY2_EEPROM_MAGIC)
4275 return -EINVAL;
4276
4277 /* Partial writes not supported */
4278 if ((eeprom->offset & 3) || (eeprom->len & 3))
4279 return -EINVAL;
4280
4281 return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
4282 }
4283
4284 static u32 sky2_fix_features(struct net_device *dev, u32 features)
4285 {
4286 const struct sky2_port *sky2 = netdev_priv(dev);
4287 const struct sky2_hw *hw = sky2->hw;
4288
4289 /* In order to do Jumbo packets on these chips, need to turn off the
4290 * transmit store/forward. Therefore checksum offload won't work.
4291 */
4292 if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U) {
4293 netdev_info(dev, "checksum offload not possible with jumbo frames\n");
4294 features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
4295 }
4296
4297 /* Some hardware requires receive checksum for RSS to work. */
4298 if ( (features & NETIF_F_RXHASH) &&
4299 !(features & NETIF_F_RXCSUM) &&
4300 (sky2->hw->flags & SKY2_HW_RSS_CHKSUM)) {
4301 netdev_info(dev, "receive hashing forces receive checksum\n");
4302 features |= NETIF_F_RXCSUM;
4303 }
4304
4305 return features;
4306 }
4307
4308 static int sky2_set_features(struct net_device *dev, u32 features)
4309 {
4310 struct sky2_port *sky2 = netdev_priv(dev);
4311 u32 changed = dev->features ^ features;
4312
4313 if (changed & NETIF_F_RXCSUM) {
4314 u32 on = features & NETIF_F_RXCSUM;
4315 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
4316 on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
4317 }
4318
4319 if (changed & NETIF_F_RXHASH)
4320 rx_set_rss(dev, features);
4321
4322 if (changed & (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX))
4323 sky2_vlan_mode(dev, features);
4324
4325 return 0;
4326 }
4327
4328 static const struct ethtool_ops sky2_ethtool_ops = {
4329 .get_settings = sky2_get_settings,
4330 .set_settings = sky2_set_settings,
4331 .get_drvinfo = sky2_get_drvinfo,
4332 .get_wol = sky2_get_wol,
4333 .set_wol = sky2_set_wol,
4334 .get_msglevel = sky2_get_msglevel,
4335 .set_msglevel = sky2_set_msglevel,
4336 .nway_reset = sky2_nway_reset,
4337 .get_regs_len = sky2_get_regs_len,
4338 .get_regs = sky2_get_regs,
4339 .get_link = ethtool_op_get_link,
4340 .get_eeprom_len = sky2_get_eeprom_len,
4341 .get_eeprom = sky2_get_eeprom,
4342 .set_eeprom = sky2_set_eeprom,
4343 .get_strings = sky2_get_strings,
4344 .get_coalesce = sky2_get_coalesce,
4345 .set_coalesce = sky2_set_coalesce,
4346 .get_ringparam = sky2_get_ringparam,
4347 .set_ringparam = sky2_set_ringparam,
4348 .get_pauseparam = sky2_get_pauseparam,
4349 .set_pauseparam = sky2_set_pauseparam,
4350 .set_phys_id = sky2_set_phys_id,
4351 .get_sset_count = sky2_get_sset_count,
4352 .get_ethtool_stats = sky2_get_ethtool_stats,
4353 };
4354
4355 #ifdef CONFIG_SKY2_DEBUG
4356
4357 static struct dentry *sky2_debug;
4358
4359
4360 /*
4361 * Read and parse the first part of Vital Product Data
4362 */
4363 #define VPD_SIZE 128
4364 #define VPD_MAGIC 0x82
4365
4366 static const struct vpd_tag {
4367 char tag[2];
4368 char *label;
4369 } vpd_tags[] = {
4370 { "PN", "Part Number" },
4371 { "EC", "Engineering Level" },
4372 { "MN", "Manufacturer" },
4373 { "SN", "Serial Number" },
4374 { "YA", "Asset Tag" },
4375 { "VL", "First Error Log Message" },
4376 { "VF", "Second Error Log Message" },
4377 { "VB", "Boot Agent ROM Configuration" },
4378 { "VE", "EFI UNDI Configuration" },
4379 };
4380
4381 static void sky2_show_vpd(struct seq_file *seq, struct sky2_hw *hw)
4382 {
4383 size_t vpd_size;
4384 loff_t offs;
4385 u8 len;
4386 unsigned char *buf;
4387 u16 reg2;
4388
4389 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
4390 vpd_size = 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
4391
4392 seq_printf(seq, "%s Product Data\n", pci_name(hw->pdev));
4393 buf = kmalloc(vpd_size, GFP_KERNEL);
4394 if (!buf) {
4395 seq_puts(seq, "no memory!\n");
4396 return;
4397 }
4398
4399 if (pci_read_vpd(hw->pdev, 0, vpd_size, buf) < 0) {
4400 seq_puts(seq, "VPD read failed\n");
4401 goto out;
4402 }
4403
4404 if (buf[0] != VPD_MAGIC) {
4405 seq_printf(seq, "VPD tag mismatch: %#x\n", buf[0]);
4406 goto out;
4407 }
4408 len = buf[1];
4409 if (len == 0 || len > vpd_size - 4) {
4410 seq_printf(seq, "Invalid id length: %d\n", len);
4411 goto out;
4412 }
4413
4414 seq_printf(seq, "%.*s\n", len, buf + 3);
4415 offs = len + 3;
4416
4417 while (offs < vpd_size - 4) {
4418 int i;
4419
4420 if (!memcmp("RW", buf + offs, 2)) /* end marker */
4421 break;
4422 len = buf[offs + 2];
4423 if (offs + len + 3 >= vpd_size)
4424 break;
4425
4426 for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) {
4427 if (!memcmp(vpd_tags[i].tag, buf + offs, 2)) {
4428 seq_printf(seq, " %s: %.*s\n",
4429 vpd_tags[i].label, len, buf + offs + 3);
4430 break;
4431 }
4432 }
4433 offs += len + 3;
4434 }
4435 out:
4436 kfree(buf);
4437 }
4438
4439 static int sky2_debug_show(struct seq_file *seq, void *v)
4440 {
4441 struct net_device *dev = seq->private;
4442 const struct sky2_port *sky2 = netdev_priv(dev);
4443 struct sky2_hw *hw = sky2->hw;
4444 unsigned port = sky2->port;
4445 unsigned idx, last;
4446 int sop;
4447
4448 sky2_show_vpd(seq, hw);
4449
4450 seq_printf(seq, "\nIRQ src=%x mask=%x control=%x\n",
4451 sky2_read32(hw, B0_ISRC),
4452 sky2_read32(hw, B0_IMSK),
4453 sky2_read32(hw, B0_Y2_SP_ICR));
4454
4455 if (!netif_running(dev)) {
4456 seq_printf(seq, "network not running\n");
4457 return 0;
4458 }
4459
4460 napi_disable(&hw->napi);
4461 last = sky2_read16(hw, STAT_PUT_IDX);
4462
4463 seq_printf(seq, "Status ring %u\n", hw->st_size);
4464 if (hw->st_idx == last)
4465 seq_puts(seq, "Status ring (empty)\n");
4466 else {
4467 seq_puts(seq, "Status ring\n");
4468 for (idx = hw->st_idx; idx != last && idx < hw->st_size;
4469 idx = RING_NEXT(idx, hw->st_size)) {
4470 const struct sky2_status_le *le = hw->st_le + idx;
4471 seq_printf(seq, "[%d] %#x %d %#x\n",
4472 idx, le->opcode, le->length, le->status);
4473 }
4474 seq_puts(seq, "\n");
4475 }
4476
4477 seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
4478 sky2->tx_cons, sky2->tx_prod,
4479 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
4480 sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
4481
4482 /* Dump contents of tx ring */
4483 sop = 1;
4484 for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size;
4485 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
4486 const struct sky2_tx_le *le = sky2->tx_le + idx;
4487 u32 a = le32_to_cpu(le->addr);
4488
4489 if (sop)
4490 seq_printf(seq, "%u:", idx);
4491 sop = 0;
4492
4493 switch (le->opcode & ~HW_OWNER) {
4494 case OP_ADDR64:
4495 seq_printf(seq, " %#x:", a);
4496 break;
4497 case OP_LRGLEN:
4498 seq_printf(seq, " mtu=%d", a);
4499 break;
4500 case OP_VLAN:
4501 seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
4502 break;
4503 case OP_TCPLISW:
4504 seq_printf(seq, " csum=%#x", a);
4505 break;
4506 case OP_LARGESEND:
4507 seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
4508 break;
4509 case OP_PACKET:
4510 seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
4511 break;
4512 case OP_BUFFER:
4513 seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
4514 break;
4515 default:
4516 seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
4517 a, le16_to_cpu(le->length));
4518 }
4519
4520 if (le->ctrl & EOP) {
4521 seq_putc(seq, '\n');
4522 sop = 1;
4523 }
4524 }
4525
4526 seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
4527 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
4528 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
4529 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
4530
4531 sky2_read32(hw, B0_Y2_SP_LISR);
4532 napi_enable(&hw->napi);
4533 return 0;
4534 }
4535
4536 static int sky2_debug_open(struct inode *inode, struct file *file)
4537 {
4538 return single_open(file, sky2_debug_show, inode->i_private);
4539 }
4540
4541 static const struct file_operations sky2_debug_fops = {
4542 .owner = THIS_MODULE,
4543 .open = sky2_debug_open,
4544 .read = seq_read,
4545 .llseek = seq_lseek,
4546 .release = single_release,
4547 };
4548
4549 /*
4550 * Use network device events to create/remove/rename
4551 * debugfs file entries
4552 */
4553 static int sky2_device_event(struct notifier_block *unused,
4554 unsigned long event, void *ptr)
4555 {
4556 struct net_device *dev = ptr;
4557 struct sky2_port *sky2 = netdev_priv(dev);
4558
4559 if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
4560 return NOTIFY_DONE;
4561
4562 switch (event) {
4563 case NETDEV_CHANGENAME:
4564 if (sky2->debugfs) {
4565 sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
4566 sky2_debug, dev->name);
4567 }
4568 break;
4569
4570 case NETDEV_GOING_DOWN:
4571 if (sky2->debugfs) {
4572 netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
4573 debugfs_remove(sky2->debugfs);
4574 sky2->debugfs = NULL;
4575 }
4576 break;
4577
4578 case NETDEV_UP:
4579 sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
4580 sky2_debug, dev,
4581 &sky2_debug_fops);
4582 if (IS_ERR(sky2->debugfs))
4583 sky2->debugfs = NULL;
4584 }
4585
4586 return NOTIFY_DONE;
4587 }
4588
4589 static struct notifier_block sky2_notifier = {
4590 .notifier_call = sky2_device_event,
4591 };
4592
4593
4594 static __init void sky2_debug_init(void)
4595 {
4596 struct dentry *ent;
4597
4598 ent = debugfs_create_dir("sky2", NULL);
4599 if (!ent || IS_ERR(ent))
4600 return;
4601
4602 sky2_debug = ent;
4603 register_netdevice_notifier(&sky2_notifier);
4604 }
4605
4606 static __exit void sky2_debug_cleanup(void)
4607 {
4608 if (sky2_debug) {
4609 unregister_netdevice_notifier(&sky2_notifier);
4610 debugfs_remove(sky2_debug);
4611 sky2_debug = NULL;
4612 }
4613 }
4614
4615 #else
4616 #define sky2_debug_init()
4617 #define sky2_debug_cleanup()
4618 #endif
4619
4620 /* Two copies of network device operations to handle special case of
4621 not allowing netpoll on second port */
4622 static const struct net_device_ops sky2_netdev_ops[2] = {
4623 {
4624 .ndo_open = sky2_up,
4625 .ndo_stop = sky2_down,
4626 .ndo_start_xmit = sky2_xmit_frame,
4627 .ndo_do_ioctl = sky2_ioctl,
4628 .ndo_validate_addr = eth_validate_addr,
4629 .ndo_set_mac_address = sky2_set_mac_address,
4630 .ndo_set_rx_mode = sky2_set_multicast,
4631 .ndo_change_mtu = sky2_change_mtu,
4632 .ndo_fix_features = sky2_fix_features,
4633 .ndo_set_features = sky2_set_features,
4634 .ndo_tx_timeout = sky2_tx_timeout,
4635 .ndo_get_stats64 = sky2_get_stats,
4636 #ifdef CONFIG_NET_POLL_CONTROLLER
4637 .ndo_poll_controller = sky2_netpoll,
4638 #endif
4639 },
4640 {
4641 .ndo_open = sky2_up,
4642 .ndo_stop = sky2_down,
4643 .ndo_start_xmit = sky2_xmit_frame,
4644 .ndo_do_ioctl = sky2_ioctl,
4645 .ndo_validate_addr = eth_validate_addr,
4646 .ndo_set_mac_address = sky2_set_mac_address,
4647 .ndo_set_rx_mode = sky2_set_multicast,
4648 .ndo_change_mtu = sky2_change_mtu,
4649 .ndo_fix_features = sky2_fix_features,
4650 .ndo_set_features = sky2_set_features,
4651 .ndo_tx_timeout = sky2_tx_timeout,
4652 .ndo_get_stats64 = sky2_get_stats,
4653 },
4654 };
4655
4656 /* Initialize network device */
4657 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
4658 unsigned port,
4659 int highmem, int wol)
4660 {
4661 struct sky2_port *sky2;
4662 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
4663
4664 if (!dev) {
4665 dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
4666 return NULL;
4667 }
4668
4669 SET_NETDEV_DEV(dev, &hw->pdev->dev);
4670 dev->irq = hw->pdev->irq;
4671 SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
4672 dev->watchdog_timeo = TX_WATCHDOG;
4673 dev->netdev_ops = &sky2_netdev_ops[port];
4674
4675 sky2 = netdev_priv(dev);
4676 sky2->netdev = dev;
4677 sky2->hw = hw;
4678 sky2->msg_enable = netif_msg_init(debug, default_msg);
4679
4680 /* Auto speed and flow control */
4681 sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
4682 if (hw->chip_id != CHIP_ID_YUKON_XL)
4683 dev->hw_features |= NETIF_F_RXCSUM;
4684
4685 sky2->flow_mode = FC_BOTH;
4686
4687 sky2->duplex = -1;
4688 sky2->speed = -1;
4689 sky2->advertising = sky2_supported_modes(hw);
4690 sky2->wol = wol;
4691
4692 spin_lock_init(&sky2->phy_lock);
4693
4694 sky2->tx_pending = TX_DEF_PENDING;
4695 sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
4696 sky2->rx_pending = RX_DEF_PENDING;
4697
4698 hw->dev[port] = dev;
4699
4700 sky2->port = port;
4701
4702 dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
4703
4704 if (highmem)
4705 dev->features |= NETIF_F_HIGHDMA;
4706
4707 /* Enable receive hashing unless hardware is known broken */
4708 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
4709 dev->hw_features |= NETIF_F_RXHASH;
4710
4711 if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) {
4712 dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
4713 dev->vlan_features |= SKY2_VLAN_OFFLOADS;
4714 }
4715
4716 dev->features |= dev->hw_features;
4717
4718 /* read the mac address */
4719 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
4720 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
4721
4722 return dev;
4723 }
4724
4725 static void __devinit sky2_show_addr(struct net_device *dev)
4726 {
4727 const struct sky2_port *sky2 = netdev_priv(dev);
4728
4729 netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr);
4730 }
4731
4732 /* Handle software interrupt used during MSI test */
4733 static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
4734 {
4735 struct sky2_hw *hw = dev_id;
4736 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
4737
4738 if (status == 0)
4739 return IRQ_NONE;
4740
4741 if (status & Y2_IS_IRQ_SW) {
4742 hw->flags |= SKY2_HW_USE_MSI;
4743 wake_up(&hw->msi_wait);
4744 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4745 }
4746 sky2_write32(hw, B0_Y2_SP_ICR, 2);
4747
4748 return IRQ_HANDLED;
4749 }
4750
4751 /* Test interrupt path by forcing a a software IRQ */
4752 static int __devinit sky2_test_msi(struct sky2_hw *hw)
4753 {
4754 struct pci_dev *pdev = hw->pdev;
4755 int err;
4756
4757 init_waitqueue_head(&hw->msi_wait);
4758
4759 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
4760
4761 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
4762 if (err) {
4763 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4764 return err;
4765 }
4766
4767 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
4768 sky2_read8(hw, B0_CTST);
4769
4770 wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
4771
4772 if (!(hw->flags & SKY2_HW_USE_MSI)) {
4773 /* MSI test failed, go back to INTx mode */
4774 dev_info(&pdev->dev, "No interrupt generated using MSI, "
4775 "switching to INTx mode.\n");
4776
4777 err = -EOPNOTSUPP;
4778 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4779 }
4780
4781 sky2_write32(hw, B0_IMSK, 0);
4782 sky2_read32(hw, B0_IMSK);
4783
4784 free_irq(pdev->irq, hw);
4785
4786 return err;
4787 }
4788
4789 /* This driver supports yukon2 chipset only */
4790 static const char *sky2_name(u8 chipid, char *buf, int sz)
4791 {
4792 const char *name[] = {
4793 "XL", /* 0xb3 */
4794 "EC Ultra", /* 0xb4 */
4795 "Extreme", /* 0xb5 */
4796 "EC", /* 0xb6 */
4797 "FE", /* 0xb7 */
4798 "FE+", /* 0xb8 */
4799 "Supreme", /* 0xb9 */
4800 "UL 2", /* 0xba */
4801 "Unknown", /* 0xbb */
4802 "Optima", /* 0xbc */
4803 "Optima Prime", /* 0xbd */
4804 "Optima 2", /* 0xbe */
4805 };
4806
4807 if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OP_2)
4808 strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
4809 else
4810 snprintf(buf, sz, "(chip %#x)", chipid);
4811 return buf;
4812 }
4813
4814 static int __devinit sky2_probe(struct pci_dev *pdev,
4815 const struct pci_device_id *ent)
4816 {
4817 struct net_device *dev, *dev1;
4818 struct sky2_hw *hw;
4819 int err, using_dac = 0, wol_default;
4820 u32 reg;
4821 char buf1[16];
4822
4823 err = pci_enable_device(pdev);
4824 if (err) {
4825 dev_err(&pdev->dev, "cannot enable PCI device\n");
4826 goto err_out;
4827 }
4828
4829 /* Get configuration information
4830 * Note: only regular PCI config access once to test for HW issues
4831 * other PCI access through shared memory for speed and to
4832 * avoid MMCONFIG problems.
4833 */
4834 err = pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
4835 if (err) {
4836 dev_err(&pdev->dev, "PCI read config failed\n");
4837 goto err_out;
4838 }
4839
4840 if (~reg == 0) {
4841 dev_err(&pdev->dev, "PCI configuration read error\n");
4842 goto err_out;
4843 }
4844
4845 err = pci_request_regions(pdev, DRV_NAME);
4846 if (err) {
4847 dev_err(&pdev->dev, "cannot obtain PCI resources\n");
4848 goto err_out_disable;
4849 }
4850
4851 pci_set_master(pdev);
4852
4853 if (sizeof(dma_addr_t) > sizeof(u32) &&
4854 !(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))) {
4855 using_dac = 1;
4856 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
4857 if (err < 0) {
4858 dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
4859 "for consistent allocations\n");
4860 goto err_out_free_regions;
4861 }
4862 } else {
4863 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
4864 if (err) {
4865 dev_err(&pdev->dev, "no usable DMA configuration\n");
4866 goto err_out_free_regions;
4867 }
4868 }
4869
4870
4871 #ifdef __BIG_ENDIAN
4872 /* The sk98lin vendor driver uses hardware byte swapping but
4873 * this driver uses software swapping.
4874 */
4875 reg &= ~PCI_REV_DESC;
4876 err = pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
4877 if (err) {
4878 dev_err(&pdev->dev, "PCI write config failed\n");
4879 goto err_out_free_regions;
4880 }
4881 #endif
4882
4883 wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
4884
4885 err = -ENOMEM;
4886
4887 hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
4888 + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
4889 if (!hw) {
4890 dev_err(&pdev->dev, "cannot allocate hardware struct\n");
4891 goto err_out_free_regions;
4892 }
4893
4894 hw->pdev = pdev;
4895 sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
4896
4897 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
4898 if (!hw->regs) {
4899 dev_err(&pdev->dev, "cannot map device registers\n");
4900 goto err_out_free_hw;
4901 }
4902
4903 err = sky2_init(hw);
4904 if (err)
4905 goto err_out_iounmap;
4906
4907 /* ring for status responses */
4908 hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING);
4909 hw->st_le = pci_alloc_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
4910 &hw->st_dma);
4911 if (!hw->st_le)
4912 goto err_out_reset;
4913
4914 dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
4915 sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
4916
4917 sky2_reset(hw);
4918
4919 dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
4920 if (!dev) {
4921 err = -ENOMEM;
4922 goto err_out_free_pci;
4923 }
4924
4925 if (!disable_msi && pci_enable_msi(pdev) == 0) {
4926 err = sky2_test_msi(hw);
4927 if (err == -EOPNOTSUPP)
4928 pci_disable_msi(pdev);
4929 else if (err)
4930 goto err_out_free_netdev;
4931 }
4932
4933 err = register_netdev(dev);
4934 if (err) {
4935 dev_err(&pdev->dev, "cannot register net device\n");
4936 goto err_out_free_netdev;
4937 }
4938
4939 netif_carrier_off(dev);
4940
4941 netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
4942
4943 sky2_show_addr(dev);
4944
4945 if (hw->ports > 1) {
4946 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
4947 if (!dev1) {
4948 err = -ENOMEM;
4949 goto err_out_unregister;
4950 }
4951
4952 err = register_netdev(dev1);
4953 if (err) {
4954 dev_err(&pdev->dev, "cannot register second net device\n");
4955 goto err_out_free_dev1;
4956 }
4957
4958 err = sky2_setup_irq(hw, hw->irq_name);
4959 if (err)
4960 goto err_out_unregister_dev1;
4961
4962 sky2_show_addr(dev1);
4963 }
4964
4965 setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
4966 INIT_WORK(&hw->restart_work, sky2_restart);
4967
4968 pci_set_drvdata(pdev, hw);
4969 pdev->d3_delay = 150;
4970
4971 return 0;
4972
4973 err_out_unregister_dev1:
4974 unregister_netdev(dev1);
4975 err_out_free_dev1:
4976 free_netdev(dev1);
4977 err_out_unregister:
4978 if (hw->flags & SKY2_HW_USE_MSI)
4979 pci_disable_msi(pdev);
4980 unregister_netdev(dev);
4981 err_out_free_netdev:
4982 free_netdev(dev);
4983 err_out_free_pci:
4984 pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
4985 hw->st_le, hw->st_dma);
4986 err_out_reset:
4987 sky2_write8(hw, B0_CTST, CS_RST_SET);
4988 err_out_iounmap:
4989 iounmap(hw->regs);
4990 err_out_free_hw:
4991 kfree(hw);
4992 err_out_free_regions:
4993 pci_release_regions(pdev);
4994 err_out_disable:
4995 pci_disable_device(pdev);
4996 err_out:
4997 pci_set_drvdata(pdev, NULL);
4998 return err;
4999 }
5000
5001 static void __devexit sky2_remove(struct pci_dev *pdev)
5002 {
5003 struct sky2_hw *hw = pci_get_drvdata(pdev);
5004 int i;
5005
5006 if (!hw)
5007 return;
5008
5009 del_timer_sync(&hw->watchdog_timer);
5010 cancel_work_sync(&hw->restart_work);
5011
5012 for (i = hw->ports-1; i >= 0; --i)
5013 unregister_netdev(hw->dev[i]);
5014
5015 sky2_write32(hw, B0_IMSK, 0);
5016 sky2_read32(hw, B0_IMSK);
5017
5018 sky2_power_aux(hw);
5019
5020 sky2_write8(hw, B0_CTST, CS_RST_SET);
5021 sky2_read8(hw, B0_CTST);
5022
5023 if (hw->ports > 1) {
5024 napi_disable(&hw->napi);
5025 free_irq(pdev->irq, hw);
5026 }
5027
5028 if (hw->flags & SKY2_HW_USE_MSI)
5029 pci_disable_msi(pdev);
5030 pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
5031 hw->st_le, hw->st_dma);
5032 pci_release_regions(pdev);
5033 pci_disable_device(pdev);
5034
5035 for (i = hw->ports-1; i >= 0; --i)
5036 free_netdev(hw->dev[i]);
5037
5038 iounmap(hw->regs);
5039 kfree(hw);
5040
5041 pci_set_drvdata(pdev, NULL);
5042 }
5043
5044 static int sky2_suspend(struct device *dev)
5045 {
5046 struct pci_dev *pdev = to_pci_dev(dev);
5047 struct sky2_hw *hw = pci_get_drvdata(pdev);
5048 int i;
5049
5050 if (!hw)
5051 return 0;
5052
5053 del_timer_sync(&hw->watchdog_timer);
5054 cancel_work_sync(&hw->restart_work);
5055
5056 rtnl_lock();
5057
5058 sky2_all_down(hw);
5059 for (i = 0; i < hw->ports; i++) {
5060 struct net_device *dev = hw->dev[i];
5061 struct sky2_port *sky2 = netdev_priv(dev);
5062
5063 if (sky2->wol)
5064 sky2_wol_init(sky2);
5065 }
5066
5067 sky2_power_aux(hw);
5068 rtnl_unlock();
5069
5070 return 0;
5071 }
5072
5073 #ifdef CONFIG_PM_SLEEP
5074 static int sky2_resume(struct device *dev)
5075 {
5076 struct pci_dev *pdev = to_pci_dev(dev);
5077 struct sky2_hw *hw = pci_get_drvdata(pdev);
5078 int err;
5079
5080 if (!hw)
5081 return 0;
5082
5083 /* Re-enable all clocks */
5084 err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
5085 if (err) {
5086 dev_err(&pdev->dev, "PCI write config failed\n");
5087 goto out;
5088 }
5089
5090 rtnl_lock();
5091 sky2_reset(hw);
5092 sky2_all_up(hw);
5093 rtnl_unlock();
5094
5095 return 0;
5096 out:
5097
5098 dev_err(&pdev->dev, "resume failed (%d)\n", err);
5099 pci_disable_device(pdev);
5100 return err;
5101 }
5102
5103 static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume);
5104 #define SKY2_PM_OPS (&sky2_pm_ops)
5105
5106 #else
5107
5108 #define SKY2_PM_OPS NULL
5109 #endif
5110
5111 static void sky2_shutdown(struct pci_dev *pdev)
5112 {
5113 sky2_suspend(&pdev->dev);
5114 pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
5115 pci_set_power_state(pdev, PCI_D3hot);
5116 }
5117
5118 static struct pci_driver sky2_driver = {
5119 .name = DRV_NAME,
5120 .id_table = sky2_id_table,
5121 .probe = sky2_probe,
5122 .remove = __devexit_p(sky2_remove),
5123 .shutdown = sky2_shutdown,
5124 .driver.pm = SKY2_PM_OPS,
5125 };
5126
5127 static int __init sky2_init_module(void)
5128 {
5129 pr_info("driver version " DRV_VERSION "\n");
5130
5131 sky2_debug_init();
5132 return pci_register_driver(&sky2_driver);
5133 }
5134
5135 static void __exit sky2_cleanup_module(void)
5136 {
5137 pci_unregister_driver(&sky2_driver);
5138 sky2_debug_cleanup();
5139 }
5140
5141 module_init(sky2_init_module);
5142 module_exit(sky2_cleanup_module);
5143
5144 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
5145 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
5146 MODULE_LICENSE("GPL");
5147 MODULE_VERSION(DRV_VERSION);