1 /* mga_dma.c -- DMA support for mga g200/g400 -*- linux-c -*-
2 * Created: Mon Dec 13 01:50:01 1999 by jhartmann@precisioninsight.com
4 * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
5 * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the "Software"),
10 * to deal in the Software without restriction, including without limitation
11 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
12 * and/or sell copies of the Software, and to permit persons to whom the
13 * Software is furnished to do so, subject to the following conditions:
15 * The above copyright notice and this permission notice (including the next
16 * paragraph) shall be included in all copies or substantial portions of the
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
22 * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
23 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
24 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
25 * DEALINGS IN THE SOFTWARE.
30 * DMA support for MGA G200 / G400.
32 * \author Rickard E. (Rik) Faith <faith@valinux.com>
33 * \author Jeff Hartmann <jhartmann@valinux.com>
34 * \author Keith Whitwell <keith@tungstengraphics.com>
35 * \author Gareth Hughes <gareth@valinux.com>
40 #include "drm_sarea.h"
44 #define MGA_DEFAULT_USEC_TIMEOUT 10000
45 #define MGA_FREELIST_DEBUG 0
47 #define MINIMAL_CLEANUP 0
48 #define FULL_CLEANUP 1
49 static int mga_do_cleanup_dma(struct drm_device
*dev
, int full_cleanup
);
51 /* ================================================================
55 int mga_do_wait_for_idle(drm_mga_private_t
* dev_priv
)
61 for (i
= 0; i
< dev_priv
->usec_timeout
; i
++) {
62 status
= MGA_READ(MGA_STATUS
) & MGA_ENGINE_IDLE_MASK
;
63 if (status
== MGA_ENDPRDMASTS
) {
64 MGA_WRITE8(MGA_CRTC_INDEX
, 0);
71 DRM_ERROR("failed!\n");
72 DRM_INFO(" status=0x%08x\n", status
);
77 static int mga_do_dma_reset(drm_mga_private_t
* dev_priv
)
79 drm_mga_sarea_t
*sarea_priv
= dev_priv
->sarea_priv
;
80 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
84 /* The primary DMA stream should look like new right about now.
87 primary
->space
= primary
->size
;
88 primary
->last_flush
= 0;
90 sarea_priv
->last_wrap
= 0;
92 /* FIXME: Reset counters, buffer ages etc...
95 /* FIXME: What else do we need to reinitialize? WARP stuff?
101 /* ================================================================
105 void mga_do_dma_flush(drm_mga_private_t
* dev_priv
)
107 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
114 /* We need to wait so that we can do an safe flush */
115 for (i
= 0; i
< dev_priv
->usec_timeout
; i
++) {
116 status
= MGA_READ(MGA_STATUS
) & MGA_ENGINE_IDLE_MASK
;
117 if (status
== MGA_ENDPRDMASTS
)
122 if (primary
->tail
== primary
->last_flush
) {
123 DRM_DEBUG(" bailing out...\n");
127 tail
= primary
->tail
+ dev_priv
->primary
->offset
;
129 /* We need to pad the stream between flushes, as the card
130 * actually (partially?) reads the first of these commands.
131 * See page 4-16 in the G400 manual, middle of the page or so.
135 DMA_BLOCK(MGA_DMAPAD
, 0x00000000,
136 MGA_DMAPAD
, 0x00000000,
137 MGA_DMAPAD
, 0x00000000, MGA_DMAPAD
, 0x00000000);
141 primary
->last_flush
= primary
->tail
;
143 head
= MGA_READ(MGA_PRIMADDRESS
);
146 primary
->space
= primary
->size
- primary
->tail
;
148 primary
->space
= head
- tail
;
151 DRM_DEBUG(" head = 0x%06lx\n", (unsigned long)(head
- dev_priv
->primary
->offset
));
152 DRM_DEBUG(" tail = 0x%06lx\n", (unsigned long)(tail
- dev_priv
->primary
->offset
));
153 DRM_DEBUG(" space = 0x%06x\n", primary
->space
);
155 mga_flush_write_combine();
156 MGA_WRITE(MGA_PRIMEND
, tail
| dev_priv
->dma_access
);
158 DRM_DEBUG("done.\n");
161 void mga_do_dma_wrap_start(drm_mga_private_t
* dev_priv
)
163 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
170 DMA_BLOCK(MGA_DMAPAD
, 0x00000000,
171 MGA_DMAPAD
, 0x00000000,
172 MGA_DMAPAD
, 0x00000000, MGA_DMAPAD
, 0x00000000);
176 tail
= primary
->tail
+ dev_priv
->primary
->offset
;
179 primary
->last_flush
= 0;
180 primary
->last_wrap
++;
182 head
= MGA_READ(MGA_PRIMADDRESS
);
184 if (head
== dev_priv
->primary
->offset
) {
185 primary
->space
= primary
->size
;
187 primary
->space
= head
- dev_priv
->primary
->offset
;
190 DRM_DEBUG(" head = 0x%06lx\n", (unsigned long)(head
- dev_priv
->primary
->offset
));
191 DRM_DEBUG(" tail = 0x%06x\n", primary
->tail
);
192 DRM_DEBUG(" wrap = %d\n", primary
->last_wrap
);
193 DRM_DEBUG(" space = 0x%06x\n", primary
->space
);
195 mga_flush_write_combine();
196 MGA_WRITE(MGA_PRIMEND
, tail
| dev_priv
->dma_access
);
198 set_bit(0, &primary
->wrapped
);
199 DRM_DEBUG("done.\n");
202 void mga_do_dma_wrap_end(drm_mga_private_t
* dev_priv
)
204 drm_mga_primary_buffer_t
*primary
= &dev_priv
->prim
;
205 drm_mga_sarea_t
*sarea_priv
= dev_priv
->sarea_priv
;
206 u32 head
= dev_priv
->primary
->offset
;
209 sarea_priv
->last_wrap
++;
210 DRM_DEBUG(" wrap = %d\n", sarea_priv
->last_wrap
);
212 mga_flush_write_combine();
213 MGA_WRITE(MGA_PRIMADDRESS
, head
| MGA_DMA_GENERAL
);
215 clear_bit(0, &primary
->wrapped
);
216 DRM_DEBUG("done.\n");
219 /* ================================================================
220 * Freelist management
223 #define MGA_BUFFER_USED ~0
224 #define MGA_BUFFER_FREE 0
226 #if MGA_FREELIST_DEBUG
227 static void mga_freelist_print(struct drm_device
* dev
)
229 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
230 drm_mga_freelist_t
*entry
;
233 DRM_INFO("current dispatch: last=0x%x done=0x%x\n",
234 dev_priv
->sarea_priv
->last_dispatch
,
235 (unsigned int)(MGA_READ(MGA_PRIMADDRESS
) -
236 dev_priv
->primary
->offset
));
237 DRM_INFO("current freelist:\n");
239 for (entry
= dev_priv
->head
->next
; entry
; entry
= entry
->next
) {
240 DRM_INFO(" %p idx=%2d age=0x%x 0x%06lx\n",
241 entry
, entry
->buf
->idx
, entry
->age
.head
,
242 (unsigned long)(entry
->age
.head
- dev_priv
->primary
->offset
));
248 static int mga_freelist_init(struct drm_device
* dev
, drm_mga_private_t
* dev_priv
)
250 struct drm_device_dma
*dma
= dev
->dma
;
252 drm_mga_buf_priv_t
*buf_priv
;
253 drm_mga_freelist_t
*entry
;
255 DRM_DEBUG("count=%d\n", dma
->buf_count
);
257 dev_priv
->head
= kzalloc(sizeof(drm_mga_freelist_t
), GFP_KERNEL
);
258 if (dev_priv
->head
== NULL
)
261 SET_AGE(&dev_priv
->head
->age
, MGA_BUFFER_USED
, 0);
263 for (i
= 0; i
< dma
->buf_count
; i
++) {
264 buf
= dma
->buflist
[i
];
265 buf_priv
= buf
->dev_private
;
267 entry
= kzalloc(sizeof(drm_mga_freelist_t
), GFP_KERNEL
);
271 entry
->next
= dev_priv
->head
->next
;
272 entry
->prev
= dev_priv
->head
;
273 SET_AGE(&entry
->age
, MGA_BUFFER_FREE
, 0);
276 if (dev_priv
->head
->next
!= NULL
)
277 dev_priv
->head
->next
->prev
= entry
;
278 if (entry
->next
== NULL
)
279 dev_priv
->tail
= entry
;
281 buf_priv
->list_entry
= entry
;
282 buf_priv
->discard
= 0;
283 buf_priv
->dispatched
= 0;
285 dev_priv
->head
->next
= entry
;
291 static void mga_freelist_cleanup(struct drm_device
* dev
)
293 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
294 drm_mga_freelist_t
*entry
;
295 drm_mga_freelist_t
*next
;
298 entry
= dev_priv
->head
;
305 dev_priv
->head
= dev_priv
->tail
= NULL
;
309 /* FIXME: Still needed?
311 static void mga_freelist_reset(struct drm_device
* dev
)
313 struct drm_device_dma
*dma
= dev
->dma
;
315 drm_mga_buf_priv_t
*buf_priv
;
318 for (i
= 0; i
< dma
->buf_count
; i
++) {
319 buf
= dma
->buflist
[i
];
320 buf_priv
= buf
->dev_private
;
321 SET_AGE(&buf_priv
->list_entry
->age
, MGA_BUFFER_FREE
, 0);
326 static struct drm_buf
*mga_freelist_get(struct drm_device
* dev
)
328 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
329 drm_mga_freelist_t
*next
;
330 drm_mga_freelist_t
*prev
;
331 drm_mga_freelist_t
*tail
= dev_priv
->tail
;
335 head
= MGA_READ(MGA_PRIMADDRESS
);
336 wrap
= dev_priv
->sarea_priv
->last_wrap
;
338 DRM_DEBUG(" tail=0x%06lx %d\n",
340 (unsigned long)(tail
->age
.head
- dev_priv
->primary
->offset
) : 0,
342 DRM_DEBUG(" head=0x%06lx %d\n",
343 (unsigned long)(head
- dev_priv
->primary
->offset
), wrap
);
345 if (TEST_AGE(&tail
->age
, head
, wrap
)) {
346 prev
= dev_priv
->tail
->prev
;
347 next
= dev_priv
->tail
;
349 next
->prev
= next
->next
= NULL
;
350 dev_priv
->tail
= prev
;
351 SET_AGE(&next
->age
, MGA_BUFFER_USED
, 0);
355 DRM_DEBUG("returning NULL!\n");
359 int mga_freelist_put(struct drm_device
* dev
, struct drm_buf
* buf
)
361 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
362 drm_mga_buf_priv_t
*buf_priv
= buf
->dev_private
;
363 drm_mga_freelist_t
*head
, *entry
, *prev
;
365 DRM_DEBUG("age=0x%06lx wrap=%d\n",
366 (unsigned long)(buf_priv
->list_entry
->age
.head
-
367 dev_priv
->primary
->offset
),
368 buf_priv
->list_entry
->age
.wrap
);
370 entry
= buf_priv
->list_entry
;
371 head
= dev_priv
->head
;
373 if (buf_priv
->list_entry
->age
.head
== MGA_BUFFER_USED
) {
374 SET_AGE(&entry
->age
, MGA_BUFFER_FREE
, 0);
375 prev
= dev_priv
->tail
;
390 /* ================================================================
391 * DMA initialization, cleanup
394 int mga_driver_load(struct drm_device
* dev
, unsigned long flags
)
396 drm_mga_private_t
*dev_priv
;
399 dev_priv
= kzalloc(sizeof(drm_mga_private_t
), GFP_KERNEL
);
403 dev
->dev_private
= (void *)dev_priv
;
405 dev_priv
->usec_timeout
= MGA_DEFAULT_USEC_TIMEOUT
;
406 dev_priv
->chipset
= flags
;
408 dev_priv
->mmio_base
= drm_get_resource_start(dev
, 1);
409 dev_priv
->mmio_size
= drm_get_resource_len(dev
, 1);
412 dev
->types
[6] = _DRM_STAT_IRQ
;
413 dev
->types
[7] = _DRM_STAT_PRIMARY
;
414 dev
->types
[8] = _DRM_STAT_SECONDARY
;
416 ret
= drm_vblank_init(dev
, 1);
419 (void) mga_driver_unload(dev
);
428 * Bootstrap the driver for AGP DMA.
431 * Investigate whether there is any benifit to storing the WARP microcode in
432 * AGP memory. If not, the microcode may as well always be put in PCI
436 * This routine needs to set dma_bs->agp_mode to the mode actually configured
437 * in the hardware. Looking just at the Linux AGP driver code, I don't see
438 * an easy way to determine this.
440 * \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap
442 static int mga_do_agp_dma_bootstrap(struct drm_device
* dev
,
443 drm_mga_dma_bootstrap_t
* dma_bs
)
445 drm_mga_private_t
*const dev_priv
=
446 (drm_mga_private_t
*) dev
->dev_private
;
447 unsigned int warp_size
= mga_warp_microcode_size(dev_priv
);
450 const unsigned secondary_size
= dma_bs
->secondary_bin_count
451 * dma_bs
->secondary_bin_size
;
452 const unsigned agp_size
= (dma_bs
->agp_size
<< 20);
453 struct drm_buf_desc req
;
454 struct drm_agp_mode mode
;
455 struct drm_agp_info info
;
456 struct drm_agp_buffer agp_req
;
457 struct drm_agp_binding bind_req
;
460 err
= drm_agp_acquire(dev
);
462 DRM_ERROR("Unable to acquire AGP: %d\n", err
);
466 err
= drm_agp_info(dev
, &info
);
468 DRM_ERROR("Unable to get AGP info: %d\n", err
);
472 mode
.mode
= (info
.mode
& ~0x07) | dma_bs
->agp_mode
;
473 err
= drm_agp_enable(dev
, mode
);
475 DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode
.mode
);
479 /* In addition to the usual AGP mode configuration, the G200 AGP cards
480 * need to have the AGP mode "manually" set.
483 if (dev_priv
->chipset
== MGA_CARD_TYPE_G200
) {
484 if (mode
.mode
& 0x02) {
485 MGA_WRITE(MGA_AGP_PLL
, MGA_AGP2XPLL_ENABLE
);
487 MGA_WRITE(MGA_AGP_PLL
, MGA_AGP2XPLL_DISABLE
);
491 /* Allocate and bind AGP memory. */
492 agp_req
.size
= agp_size
;
494 err
= drm_agp_alloc(dev
, &agp_req
);
496 dev_priv
->agp_size
= 0;
497 DRM_ERROR("Unable to allocate %uMB AGP memory\n",
502 dev_priv
->agp_size
= agp_size
;
503 dev_priv
->agp_handle
= agp_req
.handle
;
505 bind_req
.handle
= agp_req
.handle
;
507 err
= drm_agp_bind(dev
, &bind_req
);
509 DRM_ERROR("Unable to bind AGP memory: %d\n", err
);
513 /* Make drm_addbufs happy by not trying to create a mapping for less
516 if (warp_size
< PAGE_SIZE
)
517 warp_size
= PAGE_SIZE
;
520 err
= drm_addmap(dev
, offset
, warp_size
,
521 _DRM_AGP
, _DRM_READ_ONLY
, &dev_priv
->warp
);
523 DRM_ERROR("Unable to map WARP microcode: %d\n", err
);
528 err
= drm_addmap(dev
, offset
, dma_bs
->primary_size
,
529 _DRM_AGP
, _DRM_READ_ONLY
, &dev_priv
->primary
);
531 DRM_ERROR("Unable to map primary DMA region: %d\n", err
);
535 offset
+= dma_bs
->primary_size
;
536 err
= drm_addmap(dev
, offset
, secondary_size
,
537 _DRM_AGP
, 0, &dev
->agp_buffer_map
);
539 DRM_ERROR("Unable to map secondary DMA region: %d\n", err
);
543 (void)memset(&req
, 0, sizeof(req
));
544 req
.count
= dma_bs
->secondary_bin_count
;
545 req
.size
= dma_bs
->secondary_bin_size
;
546 req
.flags
= _DRM_AGP_BUFFER
;
547 req
.agp_start
= offset
;
549 err
= drm_addbufs_agp(dev
, &req
);
551 DRM_ERROR("Unable to add secondary DMA buffers: %d\n", err
);
556 struct drm_map_list
*_entry
;
557 unsigned long agp_token
= 0;
559 list_for_each_entry(_entry
, &dev
->maplist
, head
) {
560 if (_entry
->map
== dev
->agp_buffer_map
)
561 agp_token
= _entry
->user_token
;
566 dev
->agp_buffer_token
= agp_token
;
569 offset
+= secondary_size
;
570 err
= drm_addmap(dev
, offset
, agp_size
- offset
,
571 _DRM_AGP
, 0, &dev_priv
->agp_textures
);
573 DRM_ERROR("Unable to map AGP texture region %d\n", err
);
577 drm_core_ioremap(dev_priv
->warp
, dev
);
578 drm_core_ioremap(dev_priv
->primary
, dev
);
579 drm_core_ioremap(dev
->agp_buffer_map
, dev
);
581 if (!dev_priv
->warp
->handle
||
582 !dev_priv
->primary
->handle
|| !dev
->agp_buffer_map
->handle
) {
583 DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n",
584 dev_priv
->warp
->handle
, dev_priv
->primary
->handle
,
585 dev
->agp_buffer_map
->handle
);
589 dev_priv
->dma_access
= MGA_PAGPXFER
;
590 dev_priv
->wagp_enable
= MGA_WAGP_ENABLE
;
592 DRM_INFO("Initialized card for AGP DMA.\n");
596 static int mga_do_agp_dma_bootstrap(struct drm_device
* dev
,
597 drm_mga_dma_bootstrap_t
* dma_bs
)
604 * Bootstrap the driver for PCI DMA.
607 * The algorithm for decreasing the size of the primary DMA buffer could be
608 * better. The size should be rounded up to the nearest page size, then
609 * decrease the request size by a single page each pass through the loop.
612 * Determine whether the maximum address passed to drm_pci_alloc is correct.
613 * The same goes for drm_addbufs_pci.
615 * \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap
617 static int mga_do_pci_dma_bootstrap(struct drm_device
* dev
,
618 drm_mga_dma_bootstrap_t
* dma_bs
)
620 drm_mga_private_t
*const dev_priv
=
621 (drm_mga_private_t
*) dev
->dev_private
;
622 unsigned int warp_size
= mga_warp_microcode_size(dev_priv
);
623 unsigned int primary_size
;
624 unsigned int bin_count
;
626 struct drm_buf_desc req
;
628 if (dev
->dma
== NULL
) {
629 DRM_ERROR("dev->dma is NULL\n");
633 /* Make drm_addbufs happy by not trying to create a mapping for less
636 if (warp_size
< PAGE_SIZE
)
637 warp_size
= PAGE_SIZE
;
639 /* The proper alignment is 0x100 for this mapping */
640 err
= drm_addmap(dev
, 0, warp_size
, _DRM_CONSISTENT
,
641 _DRM_READ_ONLY
, &dev_priv
->warp
);
643 DRM_ERROR("Unable to create mapping for WARP microcode: %d\n",
648 /* Other than the bottom two bits being used to encode other
649 * information, there don't appear to be any restrictions on the
650 * alignment of the primary or secondary DMA buffers.
653 for (primary_size
= dma_bs
->primary_size
; primary_size
!= 0;
654 primary_size
>>= 1) {
655 /* The proper alignment for this mapping is 0x04 */
656 err
= drm_addmap(dev
, 0, primary_size
, _DRM_CONSISTENT
,
657 _DRM_READ_ONLY
, &dev_priv
->primary
);
663 DRM_ERROR("Unable to allocate primary DMA region: %d\n", err
);
667 if (dev_priv
->primary
->size
!= dma_bs
->primary_size
) {
668 DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n",
669 dma_bs
->primary_size
,
670 (unsigned)dev_priv
->primary
->size
);
671 dma_bs
->primary_size
= dev_priv
->primary
->size
;
674 for (bin_count
= dma_bs
->secondary_bin_count
; bin_count
> 0;
676 (void)memset(&req
, 0, sizeof(req
));
677 req
.count
= bin_count
;
678 req
.size
= dma_bs
->secondary_bin_size
;
680 err
= drm_addbufs_pci(dev
, &req
);
686 if (bin_count
== 0) {
687 DRM_ERROR("Unable to add secondary DMA buffers: %d\n", err
);
691 if (bin_count
!= dma_bs
->secondary_bin_count
) {
692 DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u "
693 "to %u.\n", dma_bs
->secondary_bin_count
, bin_count
);
695 dma_bs
->secondary_bin_count
= bin_count
;
698 dev_priv
->dma_access
= 0;
699 dev_priv
->wagp_enable
= 0;
701 dma_bs
->agp_mode
= 0;
703 DRM_INFO("Initialized card for PCI DMA.\n");
707 static int mga_do_dma_bootstrap(struct drm_device
* dev
,
708 drm_mga_dma_bootstrap_t
* dma_bs
)
710 const int is_agp
= (dma_bs
->agp_mode
!= 0) && drm_device_is_agp(dev
);
712 drm_mga_private_t
*const dev_priv
=
713 (drm_mga_private_t
*) dev
->dev_private
;
715 dev_priv
->used_new_dma_init
= 1;
717 /* The first steps are the same for both PCI and AGP based DMA. Map
718 * the cards MMIO registers and map a status page.
720 err
= drm_addmap(dev
, dev_priv
->mmio_base
, dev_priv
->mmio_size
,
721 _DRM_REGISTERS
, _DRM_READ_ONLY
, &dev_priv
->mmio
);
723 DRM_ERROR("Unable to map MMIO region: %d\n", err
);
727 err
= drm_addmap(dev
, 0, SAREA_MAX
, _DRM_SHM
,
728 _DRM_READ_ONLY
| _DRM_LOCKED
| _DRM_KERNEL
,
731 DRM_ERROR("Unable to map status region: %d\n", err
);
735 /* The DMA initialization procedure is slightly different for PCI and
736 * AGP cards. AGP cards just allocate a large block of AGP memory and
737 * carve off portions of it for internal uses. The remaining memory
738 * is returned to user-mode to be used for AGP textures.
741 err
= mga_do_agp_dma_bootstrap(dev
, dma_bs
);
744 /* If we attempted to initialize the card for AGP DMA but failed,
745 * clean-up any mess that may have been created.
749 mga_do_cleanup_dma(dev
, MINIMAL_CLEANUP
);
752 /* Not only do we want to try and initialized PCI cards for PCI DMA,
753 * but we also try to initialized AGP cards that could not be
754 * initialized for AGP DMA. This covers the case where we have an AGP
755 * card in a system with an unsupported AGP chipset. In that case the
756 * card will be detected as AGP, but we won't be able to allocate any
760 if (!is_agp
|| err
) {
761 err
= mga_do_pci_dma_bootstrap(dev
, dma_bs
);
767 int mga_dma_bootstrap(struct drm_device
*dev
, void *data
,
768 struct drm_file
*file_priv
)
770 drm_mga_dma_bootstrap_t
*bootstrap
= data
;
772 static const int modes
[] = { 0, 1, 2, 2, 4, 4, 4, 4 };
773 const drm_mga_private_t
*const dev_priv
=
774 (drm_mga_private_t
*) dev
->dev_private
;
776 err
= mga_do_dma_bootstrap(dev
, bootstrap
);
778 mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
782 if (dev_priv
->agp_textures
!= NULL
) {
783 bootstrap
->texture_handle
= dev_priv
->agp_textures
->offset
;
784 bootstrap
->texture_size
= dev_priv
->agp_textures
->size
;
786 bootstrap
->texture_handle
= 0;
787 bootstrap
->texture_size
= 0;
790 bootstrap
->agp_mode
= modes
[bootstrap
->agp_mode
& 0x07];
795 static int mga_do_init_dma(struct drm_device
* dev
, drm_mga_init_t
* init
)
797 drm_mga_private_t
*dev_priv
;
801 dev_priv
= dev
->dev_private
;
804 dev_priv
->clear_cmd
= MGA_DWGCTL_CLEAR
| MGA_ATYPE_BLK
;
806 dev_priv
->clear_cmd
= MGA_DWGCTL_CLEAR
| MGA_ATYPE_RSTR
;
808 dev_priv
->maccess
= init
->maccess
;
810 dev_priv
->fb_cpp
= init
->fb_cpp
;
811 dev_priv
->front_offset
= init
->front_offset
;
812 dev_priv
->front_pitch
= init
->front_pitch
;
813 dev_priv
->back_offset
= init
->back_offset
;
814 dev_priv
->back_pitch
= init
->back_pitch
;
816 dev_priv
->depth_cpp
= init
->depth_cpp
;
817 dev_priv
->depth_offset
= init
->depth_offset
;
818 dev_priv
->depth_pitch
= init
->depth_pitch
;
820 /* FIXME: Need to support AGP textures...
822 dev_priv
->texture_offset
= init
->texture_offset
[0];
823 dev_priv
->texture_size
= init
->texture_size
[0];
825 dev_priv
->sarea
= drm_getsarea(dev
);
826 if (!dev_priv
->sarea
) {
827 DRM_ERROR("failed to find sarea!\n");
831 if (!dev_priv
->used_new_dma_init
) {
833 dev_priv
->dma_access
= MGA_PAGPXFER
;
834 dev_priv
->wagp_enable
= MGA_WAGP_ENABLE
;
836 dev_priv
->status
= drm_core_findmap(dev
, init
->status_offset
);
837 if (!dev_priv
->status
) {
838 DRM_ERROR("failed to find status page!\n");
841 dev_priv
->mmio
= drm_core_findmap(dev
, init
->mmio_offset
);
842 if (!dev_priv
->mmio
) {
843 DRM_ERROR("failed to find mmio region!\n");
846 dev_priv
->warp
= drm_core_findmap(dev
, init
->warp_offset
);
847 if (!dev_priv
->warp
) {
848 DRM_ERROR("failed to find warp microcode region!\n");
851 dev_priv
->primary
= drm_core_findmap(dev
, init
->primary_offset
);
852 if (!dev_priv
->primary
) {
853 DRM_ERROR("failed to find primary dma region!\n");
856 dev
->agp_buffer_token
= init
->buffers_offset
;
857 dev
->agp_buffer_map
=
858 drm_core_findmap(dev
, init
->buffers_offset
);
859 if (!dev
->agp_buffer_map
) {
860 DRM_ERROR("failed to find dma buffer region!\n");
864 drm_core_ioremap(dev_priv
->warp
, dev
);
865 drm_core_ioremap(dev_priv
->primary
, dev
);
866 drm_core_ioremap(dev
->agp_buffer_map
, dev
);
869 dev_priv
->sarea_priv
=
870 (drm_mga_sarea_t
*) ((u8
*) dev_priv
->sarea
->handle
+
871 init
->sarea_priv_offset
);
873 if (!dev_priv
->warp
->handle
||
874 !dev_priv
->primary
->handle
||
875 ((dev_priv
->dma_access
!= 0) &&
876 ((dev
->agp_buffer_map
== NULL
) ||
877 (dev
->agp_buffer_map
->handle
== NULL
)))) {
878 DRM_ERROR("failed to ioremap agp regions!\n");
882 ret
= mga_warp_install_microcode(dev_priv
);
884 DRM_ERROR("failed to install WARP ucode!: %d\n", ret
);
888 ret
= mga_warp_init(dev_priv
);
890 DRM_ERROR("failed to init WARP engine!: %d\n", ret
);
894 dev_priv
->prim
.status
= (u32
*) dev_priv
->status
->handle
;
896 mga_do_wait_for_idle(dev_priv
);
898 /* Init the primary DMA registers.
900 MGA_WRITE(MGA_PRIMADDRESS
, dev_priv
->primary
->offset
| MGA_DMA_GENERAL
);
902 MGA_WRITE(MGA_PRIMPTR
, virt_to_bus((void *)dev_priv
->prim
.status
) | MGA_PRIMPTREN0
| /* Soft trap, SECEND, SETUPEND */
903 MGA_PRIMPTREN1
); /* DWGSYNC */
906 dev_priv
->prim
.start
= (u8
*) dev_priv
->primary
->handle
;
907 dev_priv
->prim
.end
= ((u8
*) dev_priv
->primary
->handle
908 + dev_priv
->primary
->size
);
909 dev_priv
->prim
.size
= dev_priv
->primary
->size
;
911 dev_priv
->prim
.tail
= 0;
912 dev_priv
->prim
.space
= dev_priv
->prim
.size
;
913 dev_priv
->prim
.wrapped
= 0;
915 dev_priv
->prim
.last_flush
= 0;
916 dev_priv
->prim
.last_wrap
= 0;
918 dev_priv
->prim
.high_mark
= 256 * DMA_BLOCK_SIZE
;
920 dev_priv
->prim
.status
[0] = dev_priv
->primary
->offset
;
921 dev_priv
->prim
.status
[1] = 0;
923 dev_priv
->sarea_priv
->last_wrap
= 0;
924 dev_priv
->sarea_priv
->last_frame
.head
= 0;
925 dev_priv
->sarea_priv
->last_frame
.wrap
= 0;
927 if (mga_freelist_init(dev
, dev_priv
) < 0) {
928 DRM_ERROR("could not initialize freelist\n");
935 static int mga_do_cleanup_dma(struct drm_device
*dev
, int full_cleanup
)
940 /* Make sure interrupts are disabled here because the uninstall ioctl
941 * may not have been called from userspace and after dev_private
942 * is freed, it's too late.
944 if (dev
->irq_enabled
)
945 drm_irq_uninstall(dev
);
947 if (dev
->dev_private
) {
948 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
950 if ((dev_priv
->warp
!= NULL
)
951 && (dev_priv
->warp
->type
!= _DRM_CONSISTENT
))
952 drm_core_ioremapfree(dev_priv
->warp
, dev
);
954 if ((dev_priv
->primary
!= NULL
)
955 && (dev_priv
->primary
->type
!= _DRM_CONSISTENT
))
956 drm_core_ioremapfree(dev_priv
->primary
, dev
);
958 if (dev
->agp_buffer_map
!= NULL
)
959 drm_core_ioremapfree(dev
->agp_buffer_map
, dev
);
961 if (dev_priv
->used_new_dma_init
) {
963 if (dev_priv
->agp_handle
!= 0) {
964 struct drm_agp_binding unbind_req
;
965 struct drm_agp_buffer free_req
;
967 unbind_req
.handle
= dev_priv
->agp_handle
;
968 drm_agp_unbind(dev
, &unbind_req
);
970 free_req
.handle
= dev_priv
->agp_handle
;
971 drm_agp_free(dev
, &free_req
);
973 dev_priv
->agp_textures
= NULL
;
974 dev_priv
->agp_size
= 0;
975 dev_priv
->agp_handle
= 0;
978 if ((dev
->agp
!= NULL
) && dev
->agp
->acquired
) {
979 err
= drm_agp_release(dev
);
984 dev_priv
->warp
= NULL
;
985 dev_priv
->primary
= NULL
;
986 dev_priv
->sarea
= NULL
;
987 dev_priv
->sarea_priv
= NULL
;
988 dev
->agp_buffer_map
= NULL
;
991 dev_priv
->mmio
= NULL
;
992 dev_priv
->status
= NULL
;
993 dev_priv
->used_new_dma_init
= 0;
996 memset(&dev_priv
->prim
, 0, sizeof(dev_priv
->prim
));
997 dev_priv
->warp_pipe
= 0;
998 memset(dev_priv
->warp_pipe_phys
, 0,
999 sizeof(dev_priv
->warp_pipe_phys
));
1001 if (dev_priv
->head
!= NULL
) {
1002 mga_freelist_cleanup(dev
);
1009 int mga_dma_init(struct drm_device
*dev
, void *data
,
1010 struct drm_file
*file_priv
)
1012 drm_mga_init_t
*init
= data
;
1015 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1017 switch (init
->func
) {
1019 err
= mga_do_init_dma(dev
, init
);
1021 (void)mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
1024 case MGA_CLEANUP_DMA
:
1025 return mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
1031 /* ================================================================
1032 * Primary DMA stream management
1035 int mga_dma_flush(struct drm_device
*dev
, void *data
,
1036 struct drm_file
*file_priv
)
1038 drm_mga_private_t
*dev_priv
= (drm_mga_private_t
*) dev
->dev_private
;
1039 struct drm_lock
*lock
= data
;
1041 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1043 DRM_DEBUG("%s%s%s\n",
1044 (lock
->flags
& _DRM_LOCK_FLUSH
) ? "flush, " : "",
1045 (lock
->flags
& _DRM_LOCK_FLUSH_ALL
) ? "flush all, " : "",
1046 (lock
->flags
& _DRM_LOCK_QUIESCENT
) ? "idle, " : "");
1048 WRAP_WAIT_WITH_RETURN(dev_priv
);
1050 if (lock
->flags
& (_DRM_LOCK_FLUSH
| _DRM_LOCK_FLUSH_ALL
)) {
1051 mga_do_dma_flush(dev_priv
);
1054 if (lock
->flags
& _DRM_LOCK_QUIESCENT
) {
1056 int ret
= mga_do_wait_for_idle(dev_priv
);
1058 DRM_INFO("-EBUSY\n");
1061 return mga_do_wait_for_idle(dev_priv
);
1068 int mga_dma_reset(struct drm_device
*dev
, void *data
,
1069 struct drm_file
*file_priv
)
1071 drm_mga_private_t
*dev_priv
= (drm_mga_private_t
*) dev
->dev_private
;
1073 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1075 return mga_do_dma_reset(dev_priv
);
1078 /* ================================================================
1079 * DMA buffer management
1082 static int mga_dma_get_buffers(struct drm_device
* dev
,
1083 struct drm_file
*file_priv
, struct drm_dma
* d
)
1085 struct drm_buf
*buf
;
1088 for (i
= d
->granted_count
; i
< d
->request_count
; i
++) {
1089 buf
= mga_freelist_get(dev
);
1093 buf
->file_priv
= file_priv
;
1095 if (DRM_COPY_TO_USER(&d
->request_indices
[i
],
1096 &buf
->idx
, sizeof(buf
->idx
)))
1098 if (DRM_COPY_TO_USER(&d
->request_sizes
[i
],
1099 &buf
->total
, sizeof(buf
->total
)))
1107 int mga_dma_buffers(struct drm_device
*dev
, void *data
,
1108 struct drm_file
*file_priv
)
1110 struct drm_device_dma
*dma
= dev
->dma
;
1111 drm_mga_private_t
*dev_priv
= (drm_mga_private_t
*) dev
->dev_private
;
1112 struct drm_dma
*d
= data
;
1115 LOCK_TEST_WITH_RETURN(dev
, file_priv
);
1117 /* Please don't send us buffers.
1119 if (d
->send_count
!= 0) {
1120 DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n",
1121 DRM_CURRENTPID
, d
->send_count
);
1125 /* We'll send you buffers.
1127 if (d
->request_count
< 0 || d
->request_count
> dma
->buf_count
) {
1128 DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n",
1129 DRM_CURRENTPID
, d
->request_count
, dma
->buf_count
);
1133 WRAP_TEST_WITH_RETURN(dev_priv
);
1135 d
->granted_count
= 0;
1137 if (d
->request_count
) {
1138 ret
= mga_dma_get_buffers(dev
, file_priv
, d
);
1145 * Called just before the module is unloaded.
1147 int mga_driver_unload(struct drm_device
* dev
)
1149 kfree(dev
->dev_private
);
1150 dev
->dev_private
= NULL
;
1156 * Called when the last opener of the device is closed.
1158 void mga_driver_lastclose(struct drm_device
* dev
)
1160 mga_do_cleanup_dma(dev
, FULL_CLEANUP
);
1163 int mga_driver_dma_quiescent(struct drm_device
* dev
)
1165 drm_mga_private_t
*dev_priv
= dev
->dev_private
;
1166 return mga_do_wait_for_idle(dev_priv
);