2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
26 * http://www.ivtvdriver.org
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
35 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
36 * using information from T.Adachi,Takeru KOMORIYA and others :-)
38 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
39 * version by T.Adachi. Special thanks Mr.Suzuki
42 #include "ivtv-driver.h"
43 #include "ivtv-version.h"
44 #include "ivtv-fileops.h"
46 #include "ivtv-firmware.h"
47 #include "ivtv-queue.h"
48 #include "ivtv-udma.h"
50 #include "ivtv-mailbox.h"
51 #include "ivtv-streams.h"
52 #include "ivtv-ioctl.h"
53 #include "ivtv-cards.h"
55 #include "ivtv-routing.h"
56 #include "ivtv-gpio.h"
58 #include <media/tveeprom.h>
59 #include <media/saa7115.h>
60 #include <media/v4l2-chip-ident.h>
61 #include "tuner-xc2028.h"
63 /* If you have already X v4l cards, then set this to X. This way
64 the device numbers stay matched. Example: you have a WinTV card
65 without radio and a PVR-350 with. Normally this would give a
66 video1 device together with a radio0 device for the PVR. By
67 setting this to 1 you ensure that radio0 is now also radio1. */
70 /* add your revision and whatnot here */
71 static struct pci_device_id ivtv_pci_tbl
[] __devinitdata
= {
72 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV15
,
73 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
74 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV16
,
75 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
79 MODULE_DEVICE_TABLE(pci
,ivtv_pci_tbl
);
81 /* ivtv instance counter */
82 static atomic_t ivtv_instance
= ATOMIC_INIT(0);
84 /* Parameter declarations */
85 static int cardtype
[IVTV_MAX_CARDS
];
86 static int tuner
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
87 -1, -1, -1, -1, -1, -1, -1, -1,
88 -1, -1, -1, -1, -1, -1, -1, -1,
89 -1, -1, -1, -1, -1, -1, -1, -1 };
90 static int radio
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
91 -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1 };
95 static unsigned int cardtype_c
= 1;
96 static unsigned int tuner_c
= 1;
97 static unsigned int radio_c
= 1;
98 static char pal
[] = "---";
99 static char secam
[] = "--";
100 static char ntsc
[] = "-";
104 /* DMA Buffers, Default size in MB allocated */
105 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
106 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
107 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
108 /* Exception: size in kB for this stream (MB is overkill) */
109 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
110 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
111 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
112 /* Exception: size in kB for this stream (MB is way overkill) */
113 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
115 static int enc_mpg_buffers
= IVTV_DEFAULT_ENC_MPG_BUFFERS
;
116 static int enc_yuv_buffers
= IVTV_DEFAULT_ENC_YUV_BUFFERS
;
117 static int enc_vbi_buffers
= IVTV_DEFAULT_ENC_VBI_BUFFERS
;
118 static int enc_pcm_buffers
= IVTV_DEFAULT_ENC_PCM_BUFFERS
;
119 static int dec_mpg_buffers
= IVTV_DEFAULT_DEC_MPG_BUFFERS
;
120 static int dec_yuv_buffers
= IVTV_DEFAULT_DEC_YUV_BUFFERS
;
121 static int dec_vbi_buffers
= IVTV_DEFAULT_DEC_VBI_BUFFERS
;
123 static int ivtv_yuv_mode
;
124 static int ivtv_yuv_threshold
= -1;
125 static int ivtv_pci_latency
= 1;
129 static int tunertype
= -1;
130 static int newi2c
= -1;
132 module_param_array(tuner
, int, &tuner_c
, 0644);
133 module_param_array(radio
, bool, &radio_c
, 0644);
134 module_param_array(cardtype
, int, &cardtype_c
, 0644);
135 module_param_string(pal
, pal
, sizeof(pal
), 0644);
136 module_param_string(secam
, secam
, sizeof(secam
), 0644);
137 module_param_string(ntsc
, ntsc
, sizeof(ntsc
), 0644);
138 module_param_named(debug
,ivtv_debug
, int, 0644);
139 module_param(ivtv_pci_latency
, int, 0644);
140 module_param(ivtv_yuv_mode
, int, 0644);
141 module_param(ivtv_yuv_threshold
, int, 0644);
142 module_param(ivtv_first_minor
, int, 0644);
144 module_param(enc_mpg_buffers
, int, 0644);
145 module_param(enc_yuv_buffers
, int, 0644);
146 module_param(enc_vbi_buffers
, int, 0644);
147 module_param(enc_pcm_buffers
, int, 0644);
148 module_param(dec_mpg_buffers
, int, 0644);
149 module_param(dec_yuv_buffers
, int, 0644);
150 module_param(dec_vbi_buffers
, int, 0644);
152 module_param(tunertype
, int, 0644);
153 module_param(newi2c
, int, 0644);
155 MODULE_PARM_DESC(tuner
, "Tuner type selection,\n"
156 "\t\t\tsee tuner.h for values");
157 MODULE_PARM_DESC(radio
,
158 "Enable or disable the radio. Use only if autodetection\n"
159 "\t\t\tfails. 0 = disable, 1 = enable");
160 MODULE_PARM_DESC(cardtype
,
161 "Only use this option if your card is not detected properly.\n"
162 "\t\tSpecify card type:\n"
163 "\t\t\t 1 = WinTV PVR 250\n"
164 "\t\t\t 2 = WinTV PVR 350\n"
165 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
166 "\t\t\t 4 = AVerMedia M179\n"
167 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
168 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
169 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
170 "\t\t\t 8 = Adaptec AVC-2410\n"
171 "\t\t\t 9 = Adaptec AVC-2010\n"
172 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
173 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
174 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
175 "\t\t\t13 = I/O Data GV-MVP/RX\n"
176 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
177 "\t\t\t15 = GOTVIEW PCI DVD\n"
178 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
179 "\t\t\t17 = Yuan MPC622\n"
180 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
181 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
182 "\t\t\t20 = Club3D ZAP-TV1x01\n"
183 "\t\t\t21 = AverTV MCE 116 Plus\n"
184 "\t\t\t22 = ASUS Falcon2\n"
185 "\t\t\t23 = AverMedia PVR-150 Plus\n"
186 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
187 "\t\t\t25 = AverMedia M104 (not yet working)\n"
188 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
189 "\t\t\t 0 = Autodetect (default)\n"
190 "\t\t\t-1 = Ignore this card\n\t\t");
191 MODULE_PARM_DESC(pal
, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
192 MODULE_PARM_DESC(secam
, "Set SECAM standard: BGH, DK, L, LC");
193 MODULE_PARM_DESC(ntsc
, "Set NTSC standard: M, J (Japan), K (South Korea)");
194 MODULE_PARM_DESC(tunertype
,
195 "Specify tuner type:\n"
196 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
197 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
198 "\t\t\t-1 = Autodetect (default)\n");
199 MODULE_PARM_DESC(debug
,
200 "Debug level (bitmask). Default: 0\n"
201 "\t\t\t 1/0x0001: warning\n"
202 "\t\t\t 2/0x0002: info\n"
203 "\t\t\t 4/0x0004: mailbox\n"
204 "\t\t\t 8/0x0008: ioctl\n"
205 "\t\t\t 16/0x0010: file\n"
206 "\t\t\t 32/0x0020: dma\n"
207 "\t\t\t 64/0x0040: irq\n"
208 "\t\t\t 128/0x0080: decoder\n"
209 "\t\t\t 256/0x0100: yuv\n"
210 "\t\t\t 512/0x0200: i2c\n"
211 "\t\t\t1024/0x0400: high volume\n");
212 MODULE_PARM_DESC(ivtv_pci_latency
,
213 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
214 "\t\t\tDefault: Yes");
215 MODULE_PARM_DESC(ivtv_yuv_mode
,
216 "Specify the yuv playback mode:\n"
217 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
218 "\t\t\tDefault: 0 (interlaced)");
219 MODULE_PARM_DESC(ivtv_yuv_threshold
,
220 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
221 "\t\t\tDefault: 480");;
222 MODULE_PARM_DESC(enc_mpg_buffers
,
223 "Encoder MPG Buffers (in MB)\n"
224 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS
));
225 MODULE_PARM_DESC(enc_yuv_buffers
,
226 "Encoder YUV Buffers (in MB)\n"
227 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS
));
228 MODULE_PARM_DESC(enc_vbi_buffers
,
229 "Encoder VBI Buffers (in MB)\n"
230 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS
));
231 MODULE_PARM_DESC(enc_pcm_buffers
,
232 "Encoder PCM buffers (in kB)\n"
233 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS
));
234 MODULE_PARM_DESC(dec_mpg_buffers
,
235 "Decoder MPG buffers (in MB)\n"
236 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS
));
237 MODULE_PARM_DESC(dec_yuv_buffers
,
238 "Decoder YUV buffers (in MB)\n"
239 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS
));
240 MODULE_PARM_DESC(dec_vbi_buffers
,
241 "Decoder VBI buffers (in kB)\n"
242 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS
));
243 MODULE_PARM_DESC(newi2c
,
244 "Use new I2C implementation\n"
245 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
246 "\t\t\tDefault is autodetect");
248 MODULE_PARM_DESC(ivtv_first_minor
, "Set kernel number assigned to first card");
250 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
251 MODULE_DESCRIPTION("CX23415/CX23416 driver");
252 MODULE_SUPPORTED_DEVICE
253 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
254 "\t\t\tYuan MPG series and similar)");
255 MODULE_LICENSE("GPL");
257 MODULE_VERSION(IVTV_VERSION
);
259 void ivtv_clear_irq_mask(struct ivtv
*itv
, u32 mask
)
261 itv
->irqmask
&= ~mask
;
262 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
265 void ivtv_set_irq_mask(struct ivtv
*itv
, u32 mask
)
267 itv
->irqmask
|= mask
;
268 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
271 int ivtv_set_output_mode(struct ivtv
*itv
, int mode
)
275 spin_lock(&itv
->lock
);
276 old_mode
= itv
->output_mode
;
278 itv
->output_mode
= old_mode
= mode
;
279 spin_unlock(&itv
->lock
);
283 struct ivtv_stream
*ivtv_get_output_stream(struct ivtv
*itv
)
285 switch (itv
->output_mode
) {
287 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_MPG
];
289 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_YUV
];
295 int ivtv_waitq(wait_queue_head_t
*waitq
)
299 prepare_to_wait(waitq
, &wait
, TASK_INTERRUPTIBLE
);
301 finish_wait(waitq
, &wait
);
302 return signal_pending(current
) ? -EINTR
: 0;
305 /* Generic utility functions */
306 int ivtv_msleep_timeout(unsigned int msecs
, int intr
)
308 int timeout
= msecs_to_jiffies(msecs
);
311 set_current_state(intr
? TASK_INTERRUPTIBLE
: TASK_UNINTERRUPTIBLE
);
312 timeout
= schedule_timeout(timeout
);
314 int ret
= signal_pending(current
);
323 /* Release ioremapped memory */
324 static void ivtv_iounmap(struct ivtv
*itv
)
329 /* Release registers memory */
330 if (itv
->reg_mem
!= NULL
) {
331 IVTV_DEBUG_INFO("releasing reg_mem\n");
332 iounmap(itv
->reg_mem
);
335 /* Release io memory */
336 if (itv
->has_cx23415
&& itv
->dec_mem
!= NULL
) {
337 IVTV_DEBUG_INFO("releasing dec_mem\n");
338 iounmap(itv
->dec_mem
);
342 /* Release io memory */
343 if (itv
->enc_mem
!= NULL
) {
344 IVTV_DEBUG_INFO("releasing enc_mem\n");
345 iounmap(itv
->enc_mem
);
350 /* Hauppauge card? get values from tveeprom */
351 void ivtv_read_eeprom(struct ivtv
*itv
, struct tveeprom
*tv
)
355 itv
->i2c_client
.addr
= 0xA0 >> 1;
356 tveeprom_read(&itv
->i2c_client
, eedata
, sizeof(eedata
));
357 tveeprom_hauppauge_analog(&itv
->i2c_client
, tv
, eedata
);
360 static void ivtv_process_eeprom(struct ivtv
*itv
)
363 int pci_slot
= PCI_SLOT(itv
->pdev
->devfn
);
365 ivtv_read_eeprom(itv
, &tv
);
367 /* Many thanks to Steven Toth from Hauppauge for providing the
370 /* In a few cases the PCI subsystem IDs do not correctly
371 identify the card. A better method is to check the
372 model number from the eeprom instead. */
373 case 30012 ... 30039: /* Low profile PVR250 */
374 case 32000 ... 32999:
375 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
376 case 48400 ... 48599:
377 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_250
);
379 case 48100 ... 48399:
380 case 48600 ... 48999:
381 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350
);
383 case 23000 ... 23999: /* PVR500 */
384 case 25000 ... 25999: /* Low profile PVR150 */
385 case 26000 ... 26999: /* Regular PVR150 */
386 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
389 IVTV_ERR("Invalid EEPROM\n");
392 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv
.model
);
393 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
398 /* Old style PVR350 (with an saa7114) uses this input for
401 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350_V1
);
407 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
408 itv
->card_name
= itv
->card
->name
;
409 itv
->card_i2c
= itv
->card
->i2c
;
411 /* If this is a PVR500 then it should be possible to detect whether it is the
412 first or second unit by looking at the subsystem device ID: is bit 4 is
413 set, then it is the second unit (according to info from Hauppauge).
415 However, while this works for most cards, I have seen a few PVR500 cards
416 where both units have the same subsystem ID.
418 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
419 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
420 it is the second unit. It is possible that it is a different slot when ivtv is
421 used in Xen, in that case I ignore this card here. The worst that can happen
422 is that the card presents itself with a non-working radio device.
424 This detection is needed since the eeprom reports incorrectly that a radio is
425 present on the second unit. */
426 if (tv
.model
/ 1000 == 23) {
427 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio
= {
428 .radio
= { 0x60, I2C_CLIENT_END
},
429 .demod
= { 0x43, I2C_CLIENT_END
},
430 .tv
= { 0x61, I2C_CLIENT_END
},
433 itv
->card_name
= "WinTV PVR 500";
434 itv
->card_i2c
= &ivtv_i2c_radio
;
435 if (pci_slot
== 8 || pci_slot
== 9) {
436 int is_first
= (pci_slot
& 1) == 0;
438 itv
->card_name
= is_first
? "WinTV PVR 500 (unit #1)" :
439 "WinTV PVR 500 (unit #2)";
441 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
446 IVTV_INFO("Autodetected %s\n", itv
->card_name
);
448 switch (tv
.tuner_hauppauge_model
) {
452 itv
->pvr150_workaround
= 1;
457 if (tv
.tuner_type
== TUNER_ABSENT
)
458 IVTV_ERR("tveeprom cannot autodetect tuner!\n");
460 if (itv
->options
.tuner
== -1)
461 itv
->options
.tuner
= tv
.tuner_type
;
462 if (itv
->options
.radio
== -1)
463 itv
->options
.radio
= (tv
.has_radio
!= 0);
464 /* only enable newi2c if an IR blaster is present */
465 if (itv
->options
.newi2c
== -1 && tv
.has_ir
) {
466 itv
->options
.newi2c
= (tv
.has_ir
& 4) ? 1 : 0;
467 if (itv
->options
.newi2c
) {
468 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
475 /* user specified tuner standard */
478 /* autodetect tuner standard */
479 if (tv
.tuner_formats
& V4L2_STD_PAL
) {
480 IVTV_DEBUG_INFO("PAL tuner detected\n");
481 itv
->std
|= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
482 } else if (tv
.tuner_formats
& V4L2_STD_NTSC
) {
483 IVTV_DEBUG_INFO("NTSC tuner detected\n");
484 itv
->std
|= V4L2_STD_NTSC_M
;
485 } else if (tv
.tuner_formats
& V4L2_STD_SECAM
) {
486 IVTV_DEBUG_INFO("SECAM tuner detected\n");
487 itv
->std
|= V4L2_STD_SECAM_L
;
489 IVTV_INFO("No tuner detected, default to NTSC-M\n");
490 itv
->std
|= V4L2_STD_NTSC_M
;
494 static v4l2_std_id
ivtv_parse_std(struct ivtv
*itv
)
499 return V4L2_STD_PAL_60
;
507 return V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
511 if (pal
[1] == 'c' || pal
[1] == 'C')
512 return V4L2_STD_PAL_Nc
;
513 return V4L2_STD_PAL_N
;
517 return V4L2_STD_PAL_I
;
523 return V4L2_STD_PAL_DK
;
527 return V4L2_STD_PAL_M
;
531 IVTV_WARN("pal= argument not recognised\n");
543 return V4L2_STD_SECAM_B
| V4L2_STD_SECAM_G
| V4L2_STD_SECAM_H
;
549 return V4L2_STD_SECAM_DK
;
553 if (secam
[1] == 'C' || secam
[1] == 'c')
554 return V4L2_STD_SECAM_LC
;
555 return V4L2_STD_SECAM_L
;
559 IVTV_WARN("secam= argument not recognised\n");
567 return V4L2_STD_NTSC_M
;
571 return V4L2_STD_NTSC_M_JP
;
575 return V4L2_STD_NTSC_M_KR
;
579 IVTV_WARN("ntsc= argument not recognised\n");
587 static void ivtv_process_options(struct ivtv
*itv
)
589 const char *chipname
;
592 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_MPG
] = enc_mpg_buffers
* 1024;
593 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_YUV
] = enc_yuv_buffers
* 1024;
594 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_VBI
] = enc_vbi_buffers
* 1024;
595 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_PCM
] = enc_pcm_buffers
;
596 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_MPG
] = dec_mpg_buffers
* 1024;
597 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_YUV
] = dec_yuv_buffers
* 1024;
598 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_VBI
] = dec_vbi_buffers
;
599 itv
->options
.cardtype
= cardtype
[itv
->instance
];
600 itv
->options
.tuner
= tuner
[itv
->instance
];
601 itv
->options
.radio
= radio
[itv
->instance
];
602 itv
->options
.newi2c
= newi2c
;
603 if (tunertype
< -1 || tunertype
> 1) {
604 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
607 itv
->std
= ivtv_parse_std(itv
);
608 if (itv
->std
== 0 && tunertype
>= 0)
609 itv
->std
= tunertype
? V4L2_STD_MN
: (V4L2_STD_ALL
& ~V4L2_STD_MN
);
610 itv
->has_cx23415
= (itv
->pdev
->device
== PCI_DEVICE_ID_IVTV15
);
611 chipname
= itv
->has_cx23415
? "cx23415" : "cx23416";
612 if (itv
->options
.cardtype
== -1) {
613 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname
);
616 if ((itv
->card
= ivtv_get_card(itv
->options
.cardtype
- 1))) {
617 IVTV_INFO("User specified %s card (detected %s based chip)\n",
618 itv
->card
->name
, chipname
);
619 } else if (itv
->options
.cardtype
!= 0) {
620 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
622 if (itv
->card
== NULL
) {
623 if (itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE
||
624 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT1
||
625 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT2
) {
626 itv
->card
= ivtv_get_card(itv
->has_cx23415
? IVTV_CARD_PVR_350
: IVTV_CARD_PVR_150
);
627 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
631 if (itv
->card
== NULL
) {
632 for (i
= 0; (itv
->card
= ivtv_get_card(i
)); i
++) {
633 if (itv
->card
->pci_list
== NULL
)
635 for (j
= 0; itv
->card
->pci_list
[j
].device
; j
++) {
636 if (itv
->pdev
->device
!=
637 itv
->card
->pci_list
[j
].device
)
639 if (itv
->pdev
->subsystem_vendor
!=
640 itv
->card
->pci_list
[j
].subsystem_vendor
)
642 if (itv
->pdev
->subsystem_device
!=
643 itv
->card
->pci_list
[j
].subsystem_device
)
645 IVTV_INFO("Autodetected %s card (%s based)\n",
646 itv
->card
->name
, chipname
);
653 if (itv
->card
== NULL
) {
654 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
655 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
656 itv
->pdev
->vendor
, itv
->pdev
->device
);
657 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
658 itv
->pdev
->subsystem_vendor
, itv
->pdev
->subsystem_device
);
659 IVTV_ERR(" %s based\n", chipname
);
660 IVTV_ERR("Defaulting to %s card\n", itv
->card
->name
);
661 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
662 IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
663 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
665 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
666 itv
->card_name
= itv
->card
->name
;
667 itv
->card_i2c
= itv
->card
->i2c
;
670 /* Precondition: the ivtv structure has been memset to 0. Only
671 the dev and num fields have been filled in.
672 No assumptions on the card type may be made here (see ivtv_init_struct2
675 static int __devinit
ivtv_init_struct1(struct ivtv
*itv
)
677 itv
->base_addr
= pci_resource_start(itv
->pdev
, 0);
678 itv
->enc_mbox
.max_mbox
= 2; /* the encoder has 3 mailboxes (0-2) */
679 itv
->dec_mbox
.max_mbox
= 1; /* the decoder has 2 mailboxes (0-1) */
681 mutex_init(&itv
->serialize_lock
);
682 mutex_init(&itv
->i2c_bus_lock
);
683 mutex_init(&itv
->udma
.lock
);
685 spin_lock_init(&itv
->lock
);
686 spin_lock_init(&itv
->dma_reg_lock
);
688 itv
->irq_work_queues
= create_singlethread_workqueue(itv
->v4l2_dev
.name
);
689 if (itv
->irq_work_queues
== NULL
) {
690 IVTV_ERR("Could not create ivtv workqueue\n");
694 INIT_WORK(&itv
->irq_work_queue
, ivtv_irq_work_handler
);
696 /* start counting open_id at 1 */
699 /* Initial settings */
700 cx2341x_fill_defaults(&itv
->params
);
701 itv
->params
.port
= CX2341X_PORT_MEMORY
;
702 itv
->params
.capabilities
= CX2341X_CAP_HAS_SLICED_VBI
;
703 init_waitqueue_head(&itv
->eos_waitq
);
704 init_waitqueue_head(&itv
->event_waitq
);
705 init_waitqueue_head(&itv
->vsync_waitq
);
706 init_waitqueue_head(&itv
->dma_waitq
);
707 init_timer(&itv
->dma_timer
);
708 itv
->dma_timer
.function
= ivtv_unfinished_dma
;
709 itv
->dma_timer
.data
= (unsigned long)itv
;
711 itv
->cur_dma_stream
= -1;
712 itv
->cur_pio_stream
= -1;
713 itv
->audio_stereo_mode
= AUDIO_STEREO
;
714 itv
->audio_bilingual_mode
= AUDIO_MONO_LEFT
;
720 itv
->vbi
.in
.type
= V4L2_BUF_TYPE_VBI_CAPTURE
;
721 itv
->vbi
.sliced_in
= &itv
->vbi
.in
.fmt
.sliced
;
723 /* Init the sg table for osd/yuv output */
724 sg_init_table(itv
->udma
.SGlist
, IVTV_DMA_SG_OSD_ENT
);
727 itv
->osd_global_alpha_state
= 1;
728 itv
->osd_global_alpha
= 255;
731 atomic_set(&itv
->yuv_info
.next_dma_frame
, -1);
732 itv
->yuv_info
.lace_mode
= ivtv_yuv_mode
;
733 itv
->yuv_info
.lace_threshold
= ivtv_yuv_threshold
;
734 itv
->yuv_info
.max_frames_buffered
= 3;
735 itv
->yuv_info
.track_osd
= 1;
739 /* Second initialization part. Here the card type has been
741 static void __devinit
ivtv_init_struct2(struct ivtv
*itv
)
745 for (i
= 0; i
< IVTV_CARD_MAX_VIDEO_INPUTS
; i
++)
746 if (itv
->card
->video_inputs
[i
].video_type
== 0)
749 for (i
= 0; i
< IVTV_CARD_MAX_AUDIO_INPUTS
; i
++)
750 if (itv
->card
->audio_inputs
[i
].audio_type
== 0)
752 itv
->nof_audio_inputs
= i
;
754 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
755 itv
->vbi
.sliced_size
= 288; /* multiple of 16, real size = 284 */
757 itv
->vbi
.sliced_size
= 64; /* multiple of 16, real size = 52 */
760 /* Find tuner input */
761 for (i
= 0; i
< itv
->nof_inputs
; i
++) {
762 if (itv
->card
->video_inputs
[i
].video_type
==
763 IVTV_CARD_INPUT_VID_TUNER
)
766 if (i
== itv
->nof_inputs
)
768 itv
->active_input
= i
;
769 itv
->audio_input
= itv
->card
->video_inputs
[i
].audio_index
;
772 static int ivtv_setup_pci(struct ivtv
*itv
, struct pci_dev
*pdev
,
773 const struct pci_device_id
*pci_id
)
777 unsigned char pci_latency
;
779 IVTV_DEBUG_INFO("Enabling pci device\n");
781 if (pci_enable_device(pdev
)) {
782 IVTV_ERR("Can't enable device!\n");
785 if (pci_set_dma_mask(pdev
, 0xffffffff)) {
786 IVTV_ERR("No suitable DMA available.\n");
789 if (!request_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
, "ivtv encoder")) {
790 IVTV_ERR("Cannot request encoder memory region.\n");
794 if (!request_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
,
795 IVTV_REG_SIZE
, "ivtv registers")) {
796 IVTV_ERR("Cannot request register memory region.\n");
797 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
801 if (itv
->has_cx23415
&&
802 !request_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
803 IVTV_DECODER_SIZE
, "ivtv decoder")) {
804 IVTV_ERR("Cannot request decoder memory region.\n");
805 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
806 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
810 /* Check for bus mastering */
811 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
812 if (!(cmd
& PCI_COMMAND_MASTER
)) {
813 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
814 pci_set_master(pdev
);
815 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
816 if (!(cmd
& PCI_COMMAND_MASTER
)) {
817 IVTV_ERR("Bus Mastering is not enabled\n");
821 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
823 pci_read_config_byte(pdev
, PCI_CLASS_REVISION
, &card_rev
);
824 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
826 if (pci_latency
< 64 && ivtv_pci_latency
) {
827 IVTV_INFO("Unreasonably low latency timer, "
828 "setting to 64 (was %d)\n", pci_latency
);
829 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 64);
830 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
832 /* This config space value relates to DMA latencies. The
833 default value 0x8080 is too low however and will lead
834 to DMA errors. 0xffff is the max value which solves
836 pci_write_config_dword(pdev
, 0x40, 0xffff);
838 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
839 "irq: %d, latency: %d, memory: 0x%lx\n",
840 pdev
->device
, card_rev
, pdev
->bus
->number
,
841 PCI_SLOT(pdev
->devfn
), PCI_FUNC(pdev
->devfn
),
842 pdev
->irq
, pci_latency
, (unsigned long)itv
->base_addr
);
847 static void ivtv_load_and_init_modules(struct ivtv
*itv
)
849 u32 hw
= itv
->card
->hw_all
;
852 /* check which i2c devices are actually found */
853 for (i
= 0; i
< 32; i
++) {
858 if (device
== IVTV_HW_GPIO
|| device
== IVTV_HW_TVEEPROM
) {
859 /* GPIO and TVEEPROM do not use i2c probing */
860 itv
->hw_flags
|= device
;
863 if (ivtv_i2c_register(itv
, i
) == 0)
864 itv
->hw_flags
|= device
;
867 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
868 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_CX25840
);
869 else if (itv
->card
->hw_all
& IVTV_HW_SAA717X
)
870 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA717X
);
871 else if (itv
->card
->hw_all
& IVTV_HW_SAA7114
)
872 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7114
);
874 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7115
);
875 itv
->sd_audio
= ivtv_find_hw(itv
, itv
->card
->hw_audio_ctrl
);
876 itv
->sd_muxer
= ivtv_find_hw(itv
, itv
->card
->hw_muxer
);
880 if (itv
->card
->type
== IVTV_CARD_CX23416GYC
) {
881 /* Several variations of this card exist, detect which card
882 type should be used. */
883 if ((hw
& (IVTV_HW_UPD64031A
| IVTV_HW_UPD6408X
)) == 0)
884 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS
);
885 else if ((hw
& IVTV_HW_UPD64031A
) == 0)
886 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR
);
888 else if (itv
->card
->type
== IVTV_CARD_GV_MVPRX
||
889 itv
->card
->type
== IVTV_CARD_GV_MVPRX2E
) {
890 /* The crystal frequency of GVMVPRX is 24.576MHz */
891 v4l2_subdev_call(itv
->sd_video
, video
, s_crystal_freq
,
892 SAA7115_FREQ_24_576_MHZ
, SAA7115_FREQ_FL_UCGC
);
895 if (hw
& IVTV_HW_CX25840
) {
896 itv
->vbi
.raw_decoder_line_size
= 1444;
897 itv
->vbi
.raw_decoder_sav_odd_field
= 0x20;
898 itv
->vbi
.raw_decoder_sav_even_field
= 0x60;
899 itv
->vbi
.sliced_decoder_line_size
= 272;
900 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xB0;
901 itv
->vbi
.sliced_decoder_sav_even_field
= 0xF0;
904 if (hw
& IVTV_HW_SAA711X
) {
905 struct v4l2_dbg_chip_ident v
;
907 /* determine the exact saa711x model */
908 itv
->hw_flags
&= ~IVTV_HW_SAA711X
;
910 v
.match
.type
= V4L2_CHIP_MATCH_I2C_DRIVER
;
911 strlcpy(v
.match
.name
, "saa7115", sizeof(v
.match
.name
));
912 ivtv_call_hw(itv
, IVTV_HW_SAA711X
, core
, g_chip_ident
, &v
);
913 if (v
.ident
== V4L2_IDENT_SAA7114
) {
914 itv
->hw_flags
|= IVTV_HW_SAA7114
;
915 /* VBI is not yet supported by the saa7114 driver. */
916 itv
->v4l2_cap
&= ~(V4L2_CAP_SLICED_VBI_CAPTURE
|V4L2_CAP_VBI_CAPTURE
);
918 itv
->hw_flags
|= IVTV_HW_SAA7115
;
920 itv
->vbi
.raw_decoder_line_size
= 1443;
921 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
922 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
923 itv
->vbi
.sliced_decoder_line_size
= 51;
924 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
925 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
928 if (hw
& IVTV_HW_SAA717X
) {
929 itv
->vbi
.raw_decoder_line_size
= 1443;
930 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
931 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
932 itv
->vbi
.sliced_decoder_line_size
= 51;
933 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
934 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
938 static int __devinit
ivtv_probe(struct pci_dev
*pdev
,
939 const struct pci_device_id
*pci_id
)
945 itv
= kzalloc(sizeof(struct ivtv
), GFP_ATOMIC
);
949 itv
->instance
= v4l2_device_set_name(&itv
->v4l2_dev
, "ivtv",
952 retval
= v4l2_device_register(&pdev
->dev
, &itv
->v4l2_dev
);
957 IVTV_INFO("Initializing card %d\n", itv
->instance
);
959 ivtv_process_options(itv
);
960 if (itv
->options
.cardtype
== -1) {
964 if (ivtv_init_struct1(itv
)) {
969 IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv
->base_addr
);
971 /* PCI Device Setup */
972 retval
= ivtv_setup_pci(itv
, pdev
, pci_id
);
975 if (retval
== -ENXIO
)
979 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
980 itv
->base_addr
+ IVTV_ENCODER_OFFSET
, IVTV_ENCODER_SIZE
);
981 itv
->enc_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_ENCODER_OFFSET
,
984 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
985 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
990 if (itv
->has_cx23415
) {
991 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
992 itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
993 itv
->dec_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
996 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
997 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
1003 itv
->dec_mem
= itv
->enc_mem
;
1006 /* map registers memory */
1007 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1008 itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1010 ioremap_nocache(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1011 if (!itv
->reg_mem
) {
1012 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
1013 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
1018 retval
= ivtv_gpio_init(itv
);
1023 IVTV_DEBUG_INFO("activating i2c...\n");
1024 if (init_ivtv_i2c(itv
)) {
1025 IVTV_ERR("Could not initialize i2c\n");
1029 if (itv
->card
->hw_all
& IVTV_HW_TVEEPROM
) {
1030 /* Based on the model number the cardtype may be changed.
1031 The PCI IDs are not always reliable. */
1032 ivtv_process_eeprom(itv
);
1034 if (itv
->card
->comment
)
1035 IVTV_INFO("%s", itv
->card
->comment
);
1036 if (itv
->card
->v4l2_capabilities
== 0) {
1037 /* card was detected but is not supported */
1042 if (itv
->std
== 0) {
1043 itv
->std
= V4L2_STD_NTSC_M
;
1046 if (itv
->options
.tuner
== -1) {
1049 for (i
= 0; i
< IVTV_CARD_MAX_TUNERS
; i
++) {
1050 if ((itv
->std
& itv
->card
->tuners
[i
].std
) == 0)
1052 itv
->options
.tuner
= itv
->card
->tuners
[i
].tuner
;
1056 /* if no tuner was found, then pick the first tuner in the card list */
1057 if (itv
->options
.tuner
== -1 && itv
->card
->tuners
[0].std
) {
1058 itv
->std
= itv
->card
->tuners
[0].std
;
1059 if (itv
->std
& V4L2_STD_PAL
)
1060 itv
->std
= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
1061 else if (itv
->std
& V4L2_STD_NTSC
)
1062 itv
->std
= V4L2_STD_NTSC_M
;
1063 else if (itv
->std
& V4L2_STD_SECAM
)
1064 itv
->std
= V4L2_STD_SECAM_L
;
1065 itv
->options
.tuner
= itv
->card
->tuners
[0].tuner
;
1067 if (itv
->options
.radio
== -1)
1068 itv
->options
.radio
= (itv
->card
->radio_input
.audio_type
!= 0);
1070 /* The card is now fully identified, continue with card-specific
1072 ivtv_init_struct2(itv
);
1074 ivtv_load_and_init_modules(itv
);
1076 if (itv
->std
& V4L2_STD_525_60
) {
1078 itv
->is_out_60hz
= 1;
1081 itv
->is_out_50hz
= 1;
1084 itv
->yuv_info
.osd_full_w
= 720;
1085 itv
->yuv_info
.osd_full_h
= itv
->is_out_50hz
? 576 : 480;
1086 itv
->yuv_info
.v4l2_src_w
= itv
->yuv_info
.osd_full_w
;
1087 itv
->yuv_info
.v4l2_src_h
= itv
->yuv_info
.osd_full_h
;
1089 itv
->params
.video_gop_size
= itv
->is_60hz
? 15 : 12;
1091 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_MPG
] = 0x08000;
1092 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_PCM
] = 0x01200;
1093 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_MPG
] = 0x10000;
1094 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_YUV
] = 0x10000;
1095 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_YUV
] = 0x08000;
1097 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1098 It is possible to switch between PAL and NTSC, so we need to
1099 take the largest size here. */
1100 /* 1456 is multiple of 16, real size = 1444 */
1101 itv
->vbi
.raw_size
= 1456;
1102 /* We use a buffer size of 1/2 of the total size needed for a
1103 frame. This is actually very useful, since we now receive
1104 a field at a time and that makes 'compressing' the raw data
1105 down to size by stripping off the SAV codes a lot easier.
1106 Note: having two different buffer sizes prevents standard
1107 switching on the fly. We need to find a better solution... */
1108 vbi_buf_size
= itv
->vbi
.raw_size
* (itv
->is_60hz
? 24 : 36) / 2;
1109 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_VBI
] = vbi_buf_size
;
1110 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_VBI
] = sizeof(struct v4l2_sliced_vbi_data
) * 36;
1112 if (itv
->options
.radio
> 0)
1113 itv
->v4l2_cap
|= V4L2_CAP_RADIO
;
1115 if (itv
->options
.tuner
> -1) {
1116 struct tuner_setup setup
;
1118 setup
.addr
= ADDR_UNSET
;
1119 setup
.type
= itv
->options
.tuner
;
1120 setup
.mode_mask
= T_ANALOG_TV
; /* matches TV tuners */
1121 setup
.tuner_callback
= (setup
.type
== TUNER_XC2028
) ?
1122 ivtv_reset_tuner_gpio
: NULL
;
1123 ivtv_call_all(itv
, tuner
, s_type_addr
, &setup
);
1124 if (setup
.type
== TUNER_XC2028
) {
1125 static struct xc2028_ctrl ctrl
= {
1126 .fname
= XC2028_DEFAULT_FIRMWARE
,
1129 struct v4l2_priv_tun_config cfg
= {
1130 .tuner
= itv
->options
.tuner
,
1133 ivtv_call_all(itv
, tuner
, s_config
, &cfg
);
1137 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1139 itv
->tuner_std
= itv
->std
;
1141 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1142 ivtv_call_all(itv
, video
, s_std_output
, itv
->std
);
1143 /* Turn off the output signal. The mpeg decoder is not yet
1144 active so without this you would get a green image until the
1145 mpeg decoder becomes active. */
1146 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1149 /* clear interrupt mask, effectively disabling interrupts */
1150 ivtv_set_irq_mask(itv
, 0xffffffff);
1153 retval
= request_irq(itv
->pdev
->irq
, ivtv_irq_handler
,
1154 IRQF_SHARED
| IRQF_DISABLED
, itv
->v4l2_dev
.name
, (void *)itv
);
1156 IVTV_ERR("Failed to register irq %d\n", retval
);
1160 retval
= ivtv_streams_setup(itv
);
1162 IVTV_ERR("Error %d setting up streams\n", retval
);
1165 retval
= ivtv_streams_register(itv
);
1167 IVTV_ERR("Error %d registering devices\n", retval
);
1170 IVTV_INFO("Initialized card: %s\n", itv
->card_name
);
1174 ivtv_streams_cleanup(itv
, 1);
1176 free_irq(itv
->pdev
->irq
, (void *)itv
);
1182 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1183 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1184 if (itv
->has_cx23415
)
1185 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1187 destroy_workqueue(itv
->irq_work_queues
);
1191 IVTV_ERR("Error %d on initialization\n", retval
);
1193 v4l2_device_unregister(&itv
->v4l2_dev
);
1198 int ivtv_init_on_first_open(struct ivtv
*itv
)
1200 struct v4l2_frequency vf
;
1201 /* Needed to call ioctls later */
1202 struct ivtv_open_id fh
;
1203 int fw_retry_count
= 3;
1208 if (test_bit(IVTV_F_I_FAILED
, &itv
->i_flags
))
1211 if (test_and_set_bit(IVTV_F_I_INITED
, &itv
->i_flags
))
1214 while (--fw_retry_count
> 0) {
1216 if (ivtv_firmware_init(itv
) == 0)
1218 if (fw_retry_count
> 1)
1219 IVTV_WARN("Retry loading firmware\n");
1222 if (fw_retry_count
== 0) {
1223 set_bit(IVTV_F_I_FAILED
, &itv
->i_flags
);
1227 /* Try and get firmware versions */
1228 IVTV_DEBUG_INFO("Getting firmware version..\n");
1229 ivtv_firmware_versions(itv
);
1231 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
1232 struct v4l2_control ctrl
;
1234 v4l2_subdev_call(itv
->sd_video
, core
, load_fw
);
1235 /* CX25840_CID_ENABLE_PVR150_WORKAROUND */
1236 ctrl
.id
= V4L2_CID_PRIVATE_BASE
;
1237 ctrl
.value
= itv
->pvr150_workaround
;
1238 v4l2_subdev_call(itv
->sd_video
, core
, s_ctrl
, &ctrl
);
1242 vf
.type
= V4L2_TUNER_ANALOG_TV
;
1243 vf
.frequency
= 6400; /* the tuner 'baseline' frequency */
1245 /* Set initial frequency. For PAL/SECAM broadcasts no
1246 'default' channel exists AFAIK. */
1247 if (itv
->std
== V4L2_STD_NTSC_M_JP
) {
1248 vf
.frequency
= 1460; /* ch. 1 91250*16/1000 */
1250 else if (itv
->std
& V4L2_STD_NTSC_M
) {
1251 vf
.frequency
= 1076; /* ch. 4 67250*16/1000 */
1254 video_input
= itv
->active_input
;
1255 itv
->active_input
++; /* Force update of input */
1256 ivtv_s_input(NULL
, &fh
, video_input
);
1258 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1260 itv
->std
++; /* Force full standard initialization */
1261 itv
->std_out
= itv
->std
;
1262 ivtv_s_frequency(NULL
, &fh
, &vf
);
1264 if (itv
->card
->v4l2_capabilities
& V4L2_CAP_VIDEO_OUTPUT
) {
1265 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1266 the mpeg decoder so now the saa7127 receives a proper
1268 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 1);
1269 ivtv_init_mpeg_decoder(itv
);
1271 ivtv_s_std(NULL
, &fh
, &itv
->tuner_std
);
1273 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1274 if (!itv
->has_cx23415
)
1275 write_reg_sync(0x03, IVTV_REG_DMACONTROL
);
1277 /* Default interrupts enabled. For the PVR350 this includes the
1278 decoder VSYNC interrupt, which is always on. It is not only used
1279 during decoding but also by the OSD.
1280 Some old PVR250 cards had a cx23415, so testing for that is too
1281 general. Instead test if the card has video output capability. */
1282 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1283 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
| IVTV_IRQ_DEC_VSYNC
);
1284 ivtv_set_osd_alpha(itv
);
1287 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
);
1291 static void ivtv_remove(struct pci_dev
*pdev
)
1293 struct v4l2_device
*v4l2_dev
= dev_get_drvdata(&pdev
->dev
);
1294 struct ivtv
*itv
= to_ivtv(v4l2_dev
);
1297 IVTV_DEBUG_INFO("Removing card\n");
1299 if (test_bit(IVTV_F_I_INITED
, &itv
->i_flags
)) {
1300 /* Stop all captures */
1301 IVTV_DEBUG_INFO("Stopping all streams\n");
1302 if (atomic_read(&itv
->capturing
) > 0)
1303 ivtv_stop_all_captures(itv
);
1305 /* Stop all decoding */
1306 IVTV_DEBUG_INFO("Stopping decoding\n");
1308 /* Turn off the TV-out */
1309 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
)
1310 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1311 if (atomic_read(&itv
->decoding
) > 0) {
1314 if (test_bit(IVTV_F_I_DEC_YUV
, &itv
->i_flags
))
1315 type
= IVTV_DEC_STREAM_TYPE_YUV
;
1317 type
= IVTV_DEC_STREAM_TYPE_MPG
;
1318 ivtv_stop_v4l2_decode_stream(&itv
->streams
[type
],
1319 VIDEO_CMD_STOP_TO_BLACK
| VIDEO_CMD_STOP_IMMEDIATELY
, 0);
1321 ivtv_halt_firmware(itv
);
1325 ivtv_set_irq_mask(itv
, 0xffffffff);
1326 del_timer_sync(&itv
->dma_timer
);
1328 /* Stop all Work Queues */
1329 flush_workqueue(itv
->irq_work_queues
);
1330 destroy_workqueue(itv
->irq_work_queues
);
1332 ivtv_streams_cleanup(itv
, 1);
1333 ivtv_udma_free(itv
);
1337 free_irq(itv
->pdev
->irq
, (void *)itv
);
1340 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1341 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1342 if (itv
->has_cx23415
)
1343 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1345 pci_disable_device(itv
->pdev
);
1346 for (i
= 0; i
< IVTV_VBI_FRAMES
; i
++)
1347 kfree(itv
->vbi
.sliced_mpeg_data
[i
]);
1349 printk(KERN_INFO
"ivtv: Removed %s\n", itv
->card_name
);
1351 v4l2_device_unregister(&itv
->v4l2_dev
);
1355 /* define a pci_driver for card detection */
1356 static struct pci_driver ivtv_pci_driver
= {
1358 .id_table
= ivtv_pci_tbl
,
1359 .probe
= ivtv_probe
,
1360 .remove
= ivtv_remove
,
1363 static int module_start(void)
1365 printk(KERN_INFO
"ivtv: Start initialization, version %s\n", IVTV_VERSION
);
1367 /* Validate parameters */
1368 if (ivtv_first_minor
< 0 || ivtv_first_minor
>= IVTV_MAX_CARDS
) {
1369 printk(KERN_ERR
"ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n",
1370 IVTV_MAX_CARDS
- 1);
1374 if (ivtv_debug
< 0 || ivtv_debug
> 2047) {
1376 printk(KERN_INFO
"ivtv: Debug value must be >= 0 and <= 2047\n");
1379 if (pci_register_driver(&ivtv_pci_driver
)) {
1380 printk(KERN_ERR
"ivtv: Error detecting PCI card\n");
1383 printk(KERN_INFO
"ivtv: End initialization\n");
1387 static void module_cleanup(void)
1389 pci_unregister_driver(&ivtv_pci_driver
);
1392 /* Note: These symbols are exported because they are used by the ivtvfb
1393 framebuffer module and an infrared module for the IR-blaster. */
1394 EXPORT_SYMBOL(ivtv_set_irq_mask
);
1395 EXPORT_SYMBOL(ivtv_api
);
1396 EXPORT_SYMBOL(ivtv_vapi
);
1397 EXPORT_SYMBOL(ivtv_vapi_result
);
1398 EXPORT_SYMBOL(ivtv_clear_irq_mask
);
1399 EXPORT_SYMBOL(ivtv_debug
);
1400 EXPORT_SYMBOL(ivtv_reset_ir_gpio
);
1401 EXPORT_SYMBOL(ivtv_udma_setup
);
1402 EXPORT_SYMBOL(ivtv_udma_unmap
);
1403 EXPORT_SYMBOL(ivtv_udma_alloc
);
1404 EXPORT_SYMBOL(ivtv_udma_prepare
);
1405 EXPORT_SYMBOL(ivtv_init_on_first_open
);
1407 module_init(module_start
);
1408 module_exit(module_cleanup
);