USB: serial: fix whitespace issues
[zen-stable.git] / drivers / usb / host / ohci-au1xxx.c
blob9b66df8278f3816e04931c07cecb6a146e873566
1 /*
2 * OHCI HCD (Host Controller Driver) for USB.
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 * (C) Copyright 2002 Hewlett-Packard Company
8 * Bus Glue for AMD Alchemy Au1xxx
10 * Written by Christopher Hoover <ch@hpl.hp.com>
11 * Based on fragments of previous driver by Russell King et al.
13 * Modified for LH7A404 from ohci-sa1111.c
14 * by Durgesh Pattamatta <pattamattad@sharpsec.com>
15 * Modified for AMD Alchemy Au1xxx
16 * by Matt Porter <mporter@kernel.crashing.org>
18 * This file is licenced under the GPL.
21 #include <linux/platform_device.h>
22 #include <linux/signal.h>
24 #include <asm/mach-au1x00/au1000.h>
27 extern int usb_disabled(void);
29 static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
31 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
32 int ret;
34 ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci);
36 if ((ret = ohci_init(ohci)) < 0)
37 return ret;
39 if ((ret = ohci_run(ohci)) < 0) {
40 err ("can't start %s", hcd->self.bus_name);
41 ohci_stop(hcd);
42 return ret;
45 return 0;
48 static const struct hc_driver ohci_au1xxx_hc_driver = {
49 .description = hcd_name,
50 .product_desc = "Au1xxx OHCI",
51 .hcd_priv_size = sizeof(struct ohci_hcd),
54 * generic hardware linkage
56 .irq = ohci_irq,
57 .flags = HCD_USB11 | HCD_MEMORY,
60 * basic lifecycle operations
62 .start = ohci_au1xxx_start,
63 .stop = ohci_stop,
64 .shutdown = ohci_shutdown,
67 * managing i/o requests and associated device resources
69 .urb_enqueue = ohci_urb_enqueue,
70 .urb_dequeue = ohci_urb_dequeue,
71 .endpoint_disable = ohci_endpoint_disable,
74 * scheduling support
76 .get_frame_number = ohci_get_frame,
79 * root hub support
81 .hub_status_data = ohci_hub_status_data,
82 .hub_control = ohci_hub_control,
83 #ifdef CONFIG_PM
84 .bus_suspend = ohci_bus_suspend,
85 .bus_resume = ohci_bus_resume,
86 #endif
87 .start_port_reset = ohci_start_port_reset,
90 static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
92 int ret;
93 struct usb_hcd *hcd;
95 if (usb_disabled())
96 return -ENODEV;
98 if (pdev->resource[1].flags != IORESOURCE_IRQ) {
99 pr_debug("resource[1] is not IORESOURCE_IRQ\n");
100 return -ENOMEM;
103 hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx");
104 if (!hcd)
105 return -ENOMEM;
107 hcd->rsrc_start = pdev->resource[0].start;
108 hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
110 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
111 pr_debug("request_mem_region failed\n");
112 ret = -EBUSY;
113 goto err1;
116 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
117 if (!hcd->regs) {
118 pr_debug("ioremap failed\n");
119 ret = -ENOMEM;
120 goto err2;
123 if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
124 printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
125 ret = -ENODEV;
126 goto err3;
129 ohci_hcd_init(hcd_to_ohci(hcd));
131 ret = usb_add_hcd(hcd, pdev->resource[1].start,
132 IRQF_SHARED);
133 if (ret == 0) {
134 platform_set_drvdata(pdev, hcd);
135 return ret;
138 alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
139 err3:
140 iounmap(hcd->regs);
141 err2:
142 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
143 err1:
144 usb_put_hcd(hcd);
145 return ret;
148 static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
150 struct usb_hcd *hcd = platform_get_drvdata(pdev);
152 usb_remove_hcd(hcd);
153 alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
154 iounmap(hcd->regs);
155 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
156 usb_put_hcd(hcd);
157 platform_set_drvdata(pdev, NULL);
159 return 0;
162 #ifdef CONFIG_PM
163 static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
165 struct usb_hcd *hcd = dev_get_drvdata(dev);
166 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
167 unsigned long flags;
168 int rc;
170 rc = 0;
172 /* Root hub was already suspended. Disable irq emission and
173 * mark HW unaccessible, bail out if RH has been resumed. Use
174 * the spinlock to properly synchronize with possible pending
175 * RH suspend or resume activity.
177 * This is still racy as hcd->state is manipulated outside of
178 * any locks =P But that will be a different fix.
180 spin_lock_irqsave(&ohci->lock, flags);
181 if (hcd->state != HC_STATE_SUSPENDED) {
182 rc = -EINVAL;
183 goto bail;
185 ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
186 (void)ohci_readl(ohci, &ohci->regs->intrdisable);
188 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
190 alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
191 bail:
192 spin_unlock_irqrestore(&ohci->lock, flags);
194 return rc;
197 static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
199 struct usb_hcd *hcd = dev_get_drvdata(dev);
201 alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
203 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
204 ohci_finish_controller_resume(hcd);
206 return 0;
209 static const struct dev_pm_ops au1xxx_ohci_pmops = {
210 .suspend = ohci_hcd_au1xxx_drv_suspend,
211 .resume = ohci_hcd_au1xxx_drv_resume,
214 #define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops
216 #else
217 #define AU1XXX_OHCI_PMOPS NULL
218 #endif
220 static struct platform_driver ohci_hcd_au1xxx_driver = {
221 .probe = ohci_hcd_au1xxx_drv_probe,
222 .remove = ohci_hcd_au1xxx_drv_remove,
223 .shutdown = usb_hcd_platform_shutdown,
224 .driver = {
225 .name = "au1xxx-ohci",
226 .owner = THIS_MODULE,
227 .pm = AU1XXX_OHCI_PMOPS,
231 MODULE_ALIAS("platform:au1xxx-ohci");