Avoid beyond bounds copy while caching ACL
[zen-stable.git] / arch / x86 / kernel / step.c
blobc346d116148866758ca5e602684eb91fcb77f219
1 /*
2 * x86 single-step support code, common to 32-bit and 64-bit.
3 */
4 #include <linux/sched.h>
5 #include <linux/mm.h>
6 #include <linux/ptrace.h>
7 #include <asm/desc.h>
9 unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs)
11 unsigned long addr, seg;
13 addr = regs->ip;
14 seg = regs->cs & 0xffff;
15 if (v8086_mode(regs)) {
16 addr = (addr & 0xffff) + (seg << 4);
17 return addr;
21 * We'll assume that the code segments in the GDT
22 * are all zero-based. That is largely true: the
23 * TLS segments are used for data, and the PNPBIOS
24 * and APM bios ones we just ignore here.
26 if ((seg & SEGMENT_TI_MASK) == SEGMENT_LDT) {
27 struct desc_struct *desc;
28 unsigned long base;
30 seg &= ~7UL;
32 mutex_lock(&child->mm->context.lock);
33 if (unlikely((seg >> 3) >= child->mm->context.size))
34 addr = -1L; /* bogus selector, access would fault */
35 else {
36 desc = child->mm->context.ldt + seg;
37 base = get_desc_base(desc);
39 /* 16-bit code segment? */
40 if (!desc->d)
41 addr &= 0xffff;
42 addr += base;
44 mutex_unlock(&child->mm->context.lock);
47 return addr;
50 static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
52 int i, copied;
53 unsigned char opcode[15];
54 unsigned long addr = convert_ip_to_linear(child, regs);
56 copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0);
57 for (i = 0; i < copied; i++) {
58 switch (opcode[i]) {
59 /* popf and iret */
60 case 0x9d: case 0xcf:
61 return 1;
63 /* CHECKME: 64 65 */
65 /* opcode and address size prefixes */
66 case 0x66: case 0x67:
67 continue;
68 /* irrelevant prefixes (segment overrides and repeats) */
69 case 0x26: case 0x2e:
70 case 0x36: case 0x3e:
71 case 0x64: case 0x65:
72 case 0xf0: case 0xf2: case 0xf3:
73 continue;
75 #ifdef CONFIG_X86_64
76 case 0x40 ... 0x4f:
77 if (!user_64bit_mode(regs))
78 /* 32-bit mode: register increment */
79 return 0;
80 /* 64-bit mode: REX prefix */
81 continue;
82 #endif
84 /* CHECKME: f2, f3 */
87 * pushf: NOTE! We should probably not let
88 * the user see the TF bit being set. But
89 * it's more pain than it's worth to avoid
90 * it, and a debugger could emulate this
91 * all in user space if it _really_ cares.
93 case 0x9c:
94 default:
95 return 0;
98 return 0;
102 * Enable single-stepping. Return nonzero if user mode is not using TF itself.
104 static int enable_single_step(struct task_struct *child)
106 struct pt_regs *regs = task_pt_regs(child);
107 unsigned long oflags;
110 * If we stepped into a sysenter/syscall insn, it trapped in
111 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
112 * If user-mode had set TF itself, then it's still clear from
113 * do_debug() and we need to set it again to restore the user
114 * state so we don't wrongly set TIF_FORCED_TF below.
115 * If enable_single_step() was used last and that is what
116 * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are
117 * already set and our bookkeeping is fine.
119 if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP)))
120 regs->flags |= X86_EFLAGS_TF;
123 * Always set TIF_SINGLESTEP - this guarantees that
124 * we single-step system calls etc.. This will also
125 * cause us to set TF when returning to user mode.
127 set_tsk_thread_flag(child, TIF_SINGLESTEP);
129 oflags = regs->flags;
131 /* Set TF on the kernel stack.. */
132 regs->flags |= X86_EFLAGS_TF;
135 * ..but if TF is changed by the instruction we will trace,
136 * don't mark it as being "us" that set it, so that we
137 * won't clear it by hand later.
139 * Note that if we don't actually execute the popf because
140 * of a signal arriving right now or suchlike, we will lose
141 * track of the fact that it really was "us" that set it.
143 if (is_setting_trap_flag(child, regs)) {
144 clear_tsk_thread_flag(child, TIF_FORCED_TF);
145 return 0;
149 * If TF was already set, check whether it was us who set it.
150 * If not, we should never attempt a block step.
152 if (oflags & X86_EFLAGS_TF)
153 return test_tsk_thread_flag(child, TIF_FORCED_TF);
155 set_tsk_thread_flag(child, TIF_FORCED_TF);
157 return 1;
161 * Enable single or block step.
163 static void enable_step(struct task_struct *child, bool block)
166 * Make sure block stepping (BTF) is not enabled unless it should be.
167 * Note that we don't try to worry about any is_setting_trap_flag()
168 * instructions after the first when using block stepping.
169 * So no one should try to use debugger block stepping in a program
170 * that uses user-mode single stepping itself.
172 if (enable_single_step(child) && block) {
173 unsigned long debugctl = get_debugctlmsr();
175 debugctl |= DEBUGCTLMSR_BTF;
176 update_debugctlmsr(debugctl);
177 set_tsk_thread_flag(child, TIF_BLOCKSTEP);
178 } else if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) {
179 unsigned long debugctl = get_debugctlmsr();
181 debugctl &= ~DEBUGCTLMSR_BTF;
182 update_debugctlmsr(debugctl);
183 clear_tsk_thread_flag(child, TIF_BLOCKSTEP);
187 void user_enable_single_step(struct task_struct *child)
189 enable_step(child, 0);
192 void user_enable_block_step(struct task_struct *child)
194 enable_step(child, 1);
197 void user_disable_single_step(struct task_struct *child)
200 * Make sure block stepping (BTF) is disabled.
202 if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) {
203 unsigned long debugctl = get_debugctlmsr();
205 debugctl &= ~DEBUGCTLMSR_BTF;
206 update_debugctlmsr(debugctl);
207 clear_tsk_thread_flag(child, TIF_BLOCKSTEP);
210 /* Always clear TIF_SINGLESTEP... */
211 clear_tsk_thread_flag(child, TIF_SINGLESTEP);
213 /* But touch TF only if it was set by us.. */
214 if (test_and_clear_tsk_thread_flag(child, TIF_FORCED_TF))
215 task_pt_regs(child)->flags &= ~X86_EFLAGS_TF;