drivers/ata/pata_atp867x.c

   1 /*
   2  * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
   3  *
   4  *      (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
   5  *
   6  * Per Atp867 data sheet rev 1.2, Acard.
   7  * Based in part on early ide code from
   8  *      2003-2004 by Eric Uhrhane, Google, Inc.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  23  *
  24  *
  25  * TODO:
  26  *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
  27  */
  28
  29 #include <linux/kernel.h>
  30 #include <linux/module.h>
  31 #include <linux/pci.h>
  32 #include <linux/init.h>
  33 #include <linux/blkdev.h>
  34 #include <linux/delay.h>
  35 #include <linux/device.h>
  36 #include <linux/gfp.h>
  37 #include <scsi/scsi_host.h>
  38 #include <linux/libata.h>
  39
  40 #define DRV_NAME        "pata_atp867x"
  41 #define DRV_VERSION     "0.7.5"
  42
  43 /*
  44  * IO Registers
  45  * Note that all runtime hot priv ports are cached in ap private_data
  46  */
  47
  48 enum {
  49         ATP867X_IO_CHANNEL_OFFSET       = 0x10,
  50
  51         /*
  52          * IO Register Bitfields
  53          */
  54
  55         ATP867X_IO_PIOSPD_ACTIVE_SHIFT  = 4,
  56         ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
  57
  58         ATP867X_IO_DMAMODE_MSTR_SHIFT   = 0,
  59         ATP867X_IO_DMAMODE_MSTR_MASK    = 0x07,
  60         ATP867X_IO_DMAMODE_SLAVE_SHIFT  = 4,
  61         ATP867X_IO_DMAMODE_SLAVE_MASK   = 0x70,
  62
  63         ATP867X_IO_DMAMODE_UDMA_6       = 0x07,
  64         ATP867X_IO_DMAMODE_UDMA_5       = 0x06,
  65         ATP867X_IO_DMAMODE_UDMA_4       = 0x05,
  66         ATP867X_IO_DMAMODE_UDMA_3       = 0x04,
  67         ATP867X_IO_DMAMODE_UDMA_2       = 0x03,
  68         ATP867X_IO_DMAMODE_UDMA_1       = 0x02,
  69         ATP867X_IO_DMAMODE_UDMA_0       = 0x01,
  70         ATP867X_IO_DMAMODE_DISABLE      = 0x00,
  71
  72         ATP867X_IO_SYS_INFO_66MHZ       = 0x04,
  73         ATP867X_IO_SYS_INFO_SLOW_UDMA5  = 0x02,
  74         ATP867X_IO_SYS_MASK_RESERVED    = (~0xf1),
  75
  76         ATP867X_IO_PORTSPD_VAL          = 0x1143,
  77         ATP867X_PREREAD_VAL             = 0x0200,
  78
  79         ATP867X_NUM_PORTS               = 4,
  80         ATP867X_BAR_IOBASE              = 0,
  81         ATP867X_BAR_ROMBASE             = 6,
  82 };
  83
  84 #define ATP867X_IOBASE(ap)              ((ap)->host->iomap[0])
  85 #define ATP867X_SYS_INFO(ap)            (0x3F + ATP867X_IOBASE(ap))
  86
  87 #define ATP867X_IO_PORTBASE(ap, port)   (0x00 + ATP867X_IOBASE(ap) + \
  88                                         (port) * ATP867X_IO_CHANNEL_OFFSET)
  89 #define ATP867X_IO_DMABASE(ap, port)    (0x40 + \
  90                                         ATP867X_IO_PORTBASE((ap), (port)))
  91
  92 #define ATP867X_IO_STATUS(ap, port)     (0x07 + \
  93                                         ATP867X_IO_PORTBASE((ap), (port)))
  94 #define ATP867X_IO_ALTSTATUS(ap, port)  (0x0E + \
  95                                         ATP867X_IO_PORTBASE((ap), (port)))
  96
  97 /*
  98  * hot priv ports
  99  */
 100 #define ATP867X_IO_MSTRPIOSPD(ap, port) (0x08 + \
 101                                         ATP867X_IO_DMABASE((ap), (port)))
 102 #define ATP867X_IO_SLAVPIOSPD(ap, port) (0x09 + \
 103                                         ATP867X_IO_DMABASE((ap), (port)))
 104 #define ATP867X_IO_8BPIOSPD(ap, port)   (0x0A + \
 105                                         ATP867X_IO_DMABASE((ap), (port)))
 106 #define ATP867X_IO_DMAMODE(ap, port)    (0x0B + \
 107                                         ATP867X_IO_DMABASE((ap), (port)))
 108
 109 #define ATP867X_IO_PORTSPD(ap, port)    (0x4A + \
 110                                         ATP867X_IO_PORTBASE((ap), (port)))
 111 #define ATP867X_IO_PREREAD(ap, port)    (0x4C + \
 112                                         ATP867X_IO_PORTBASE((ap), (port)))
 113
 114 struct atp867x_priv {
 115         void __iomem *dma_mode;
 116         void __iomem *mstr_piospd;
 117         void __iomem *slave_piospd;
 118         void __iomem *eightb_piospd;
 119         int             pci66mhz;
 120 };
 121
 122 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 123 {
 124         struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
 125         struct atp867x_priv *dp = ap->private_data;
 126         u8 speed = adev->dma_mode;
 127         u8 b;
 128         u8 mode = speed - XFER_UDMA_0 + 1;
 129
 130         /*
 131          * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
 132          * on 66MHz bus
 133          *   rev-A: UDMA_1~4 (5, 6 no change)
 134          *   rev-B: all UDMA modes
 135          *   UDMA_0 stays not to disable UDMA
 136          */
 137         if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
 138            (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
 139             mode < ATP867X_IO_DMAMODE_UDMA_5))
 140                 mode--;
 141
 142         b = ioread8(dp->dma_mode);
 143         if (adev->devno & 1) {
 144                 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
 145                         (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
 146         } else {
 147                 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
 148                         (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
 149         }
 150         iowrite8(b, dp->dma_mode);
 151 }
 152
 153 static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
 154         unsigned int clk)
 155 {
 156         struct atp867x_priv *dp = ap->private_data;
 157         unsigned char clocks = clk;
 158
 159         /*
 160          * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
 161          * on 66MHz bus
 162          */
 163         if (dp->pci66mhz)
 164                 clocks++;
 165
 166         switch (clocks) {
 167         case 0:
 168                 clocks = 1;
 169                 break;
 170         case 1 ... 6:
 171                 break;
 172         default:
 173                 printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
 174                         "Using 12clk.\n", clk);
 175         case 9 ... 12:
 176                 clocks = 7;     /* 12 clk */
 177                 break;
 178         case 7:
 179         case 8: /* default 8 clk */
 180                 clocks = 0;
 181                 goto active_clock_shift_done;
 182         }
 183
 184 active_clock_shift_done:
 185         return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
 186 }
 187
 188 static int atp867x_get_recover_clocks_shifted(unsigned int clk)
 189 {
 190         unsigned char clocks = clk;
 191
 192         switch (clocks) {
 193         case 0:
 194                 clocks = 1;
 195                 break;
 196         case 1 ... 11:
 197                 break;
 198         case 13:
 199         case 14:
 200                 --clocks;       /* by the spec */
 201                 break;
 202         case 15:
 203                 break;
 204         default:
 205                 printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
 206                         "Using default 12clk.\n", clk);
 207         case 12:        /* default 12 clk */
 208                 clocks = 0;
 209                 break;
 210         }
 211
 212         return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
 213 }
 214
 215 static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 216 {
 217         struct ata_device *peer = ata_dev_pair(adev);
 218         struct atp867x_priv *dp = ap->private_data;
 219         u8 speed = adev->pio_mode;
 220         struct ata_timing t, p;
 221         int T, UT;
 222         u8 b;
 223
 224         T = 1000000000 / 33333;
 225         UT = T / 4;
 226
 227         ata_timing_compute(adev, speed, &t, T, UT);
 228         if (peer && peer->pio_mode) {
 229                 ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
 230                 ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
 231         }
 232
 233         b = ioread8(dp->dma_mode);
 234         if (adev->devno & 1)
 235                 b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
 236         else
 237                 b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
 238         iowrite8(b, dp->dma_mode);
 239
 240         b = atp867x_get_active_clocks_shifted(ap, t.active) |
 241             atp867x_get_recover_clocks_shifted(t.recover);
 242
 243         if (adev->devno & 1)
 244                 iowrite8(b, dp->slave_piospd);
 245         else
 246                 iowrite8(b, dp->mstr_piospd);
 247
 248         b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
 249             atp867x_get_recover_clocks_shifted(t.rec8b);
 250
 251         iowrite8(b, dp->eightb_piospd);
 252 }
 253
 254 static int atp867x_cable_override(struct pci_dev *pdev)
 255 {
 256         if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
 257                 (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
 258                  pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
 259                 return 1;
 260         }
 261         return 0;
 262 }
 263
 264 static int atp867x_cable_detect(struct ata_port *ap)
 265 {
 266         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 267
 268         if (atp867x_cable_override(pdev))
 269                 return ATA_CBL_PATA40_SHORT;
 270
 271         return ATA_CBL_PATA_UNK;
 272 }
 273
 274 static struct scsi_host_template atp867x_sht = {
 275         ATA_BMDMA_SHT(DRV_NAME),
 276 };
 277
 278 static struct ata_port_operations atp867x_ops = {
 279         .inherits               = &ata_bmdma_port_ops,
 280         .cable_detect           = atp867x_cable_detect,
 281         .set_piomode            = atp867x_set_piomode,
 282         .set_dmamode            = atp867x_set_dmamode,
 283 };
 284
 285
 286 #ifdef  ATP867X_DEBUG
 287 static void atp867x_check_res(struct pci_dev *pdev)
 288 {
 289         int i;
 290         unsigned long start, len;
 291
 292         /* Check the PCI resources for this channel are enabled */
 293         for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 294                 start = pci_resource_start(pdev, i);
 295                 len   = pci_resource_len(pdev, i);
 296                 printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n",
 297                         start, len);
 298         }
 299 }
 300
 301 static void atp867x_check_ports(struct ata_port *ap, int port)
 302 {
 303         struct ata_ioports *ioaddr = &ap->ioaddr;
 304         struct atp867x_priv *dp = ap->private_data;
 305
 306         printk(KERN_DEBUG "ATP867X: port[%d] addresses\n"
 307                 "  cmd_addr     =0x%llx, 0x%llx\n"
 308                 "  ctl_addr     =0x%llx, 0x%llx\n"
 309                 "  bmdma_addr   =0x%llx, 0x%llx\n"
 310                 "  data_addr    =0x%llx\n"
 311                 "  error_addr   =0x%llx\n"
 312                 "  feature_addr =0x%llx\n"
 313                 "  nsect_addr   =0x%llx\n"
 314                 "  lbal_addr    =0x%llx\n"
 315                 "  lbam_addr    =0x%llx\n"
 316                 "  lbah_addr    =0x%llx\n"
 317                 "  device_addr  =0x%llx\n"
 318                 "  status_addr  =0x%llx\n"
 319                 "  command_addr =0x%llx\n"
 320                 "  dp->dma_mode =0x%llx\n"
 321                 "  dp->mstr_piospd      =0x%llx\n"
 322                 "  dp->slave_piospd     =0x%llx\n"
 323                 "  dp->eightb_piospd    =0x%llx\n"
 324                 "  dp->pci66mhz         =0x%lx\n",
 325                 port,
 326                 (unsigned long long)ioaddr->cmd_addr,
 327                 (unsigned long long)ATP867X_IO_PORTBASE(ap, port),
 328                 (unsigned long long)ioaddr->ctl_addr,
 329                 (unsigned long long)ATP867X_IO_ALTSTATUS(ap, port),
 330                 (unsigned long long)ioaddr->bmdma_addr,
 331                 (unsigned long long)ATP867X_IO_DMABASE(ap, port),
 332                 (unsigned long long)ioaddr->data_addr,
 333                 (unsigned long long)ioaddr->error_addr,
 334                 (unsigned long long)ioaddr->feature_addr,
 335                 (unsigned long long)ioaddr->nsect_addr,
 336                 (unsigned long long)ioaddr->lbal_addr,
 337                 (unsigned long long)ioaddr->lbam_addr,
 338                 (unsigned long long)ioaddr->lbah_addr,
 339                 (unsigned long long)ioaddr->device_addr,
 340                 (unsigned long long)ioaddr->status_addr,
 341                 (unsigned long long)ioaddr->command_addr,
 342                 (unsigned long long)dp->dma_mode,
 343                 (unsigned long long)dp->mstr_piospd,
 344                 (unsigned long long)dp->slave_piospd,
 345                 (unsigned long long)dp->eightb_piospd,
 346                 (unsigned long)dp->pci66mhz);
 347 }
 348 #endif
 349
 350 static int atp867x_set_priv(struct ata_port *ap)
 351 {
 352         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 353         struct atp867x_priv *dp;
 354         int port = ap->port_no;
 355
 356         dp = ap->private_data =
 357                 devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
 358         if (dp == NULL)
 359                 return -ENOMEM;
 360
 361         dp->dma_mode     = ATP867X_IO_DMAMODE(ap, port);
 362         dp->mstr_piospd  = ATP867X_IO_MSTRPIOSPD(ap, port);
 363         dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port);
 364         dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port);
 365
 366         dp->pci66mhz =
 367                 ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ;
 368
 369         return 0;
 370 }
 371
 372 static void atp867x_fixup(struct ata_host *host)
 373 {
 374         struct pci_dev *pdev = to_pci_dev(host->dev);
 375         struct ata_port *ap = host->ports[0];
 376         int i;
 377         u8 v;
 378
 379         /*
 380          * Broken BIOS might not set latency high enough
 381          */
 382         pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v);
 383         if (v < 0x80) {
 384                 v = 0x80;
 385                 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v);
 386                 printk(KERN_DEBUG "ATP867X: set latency timer of device %s"
 387                         " to %d\n", pci_name(pdev), v);
 388         }
 389
 390         /*
 391          * init 8bit io ports speed(0aaarrrr) to 43h and
 392          * init udma modes of master/slave to 0/0(11h)
 393          */
 394         for (i = 0; i < ATP867X_NUM_PORTS; i++)
 395                 iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i));
 396
 397         /*
 398          * init PreREAD counts
 399          */
 400         for (i = 0; i < ATP867X_NUM_PORTS; i++)
 401                 iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i));
 402
 403         v = ioread8(ATP867X_IOBASE(ap) + 0x28);
 404         v &= 0xcf;      /* Enable INTA#: bit4=0 means enable */
 405         v |= 0xc0;      /* Enable PCI burst, MRM & not immediate interrupts */
 406         iowrite8(v, ATP867X_IOBASE(ap) + 0x28);
 407
 408         /*
 409          * Turn off the over clocked udma5 mode, only for Rev-B
 410          */
 411         v = ioread8(ATP867X_SYS_INFO(ap));
 412         v &= ATP867X_IO_SYS_MASK_RESERVED;
 413         if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B)
 414                 v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5;
 415         iowrite8(v, ATP867X_SYS_INFO(ap));
 416 }
 417
 418 static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
 419 {
 420         struct device *gdev = host->dev;
 421         struct pci_dev *pdev = to_pci_dev(gdev);
 422         unsigned int mask = 0;
 423         int i, rc;
 424
 425         /*
 426          * do not map rombase
 427          */
 428         rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME);
 429         if (rc == -EBUSY)
 430                 pcim_pin_device(pdev);
 431         if (rc)
 432                 return rc;
 433         host->iomap = pcim_iomap_table(pdev);
 434
 435 #ifdef  ATP867X_DEBUG
 436         atp867x_check_res(pdev);
 437
 438         for (i = 0; i < PCI_ROM_RESOURCE; i++)
 439                 printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i,
 440                         (unsigned long long)(host->iomap[i]));
 441 #endif
 442
 443         /*
 444          * request, iomap BARs and init port addresses accordingly
 445          */
 446         for (i = 0; i < host->n_ports; i++) {
 447                 struct ata_port *ap = host->ports[i];
 448                 struct ata_ioports *ioaddr = &ap->ioaddr;
 449
 450                 ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i);
 451                 ioaddr->ctl_addr = ioaddr->altstatus_addr
 452                                  = ATP867X_IO_ALTSTATUS(ap, i);
 453                 ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i);
 454
 455                 ata_sff_std_ports(ioaddr);
 456                 rc = atp867x_set_priv(ap);
 457                 if (rc)
 458                         return rc;
 459
 460 #ifdef  ATP867X_DEBUG
 461                 atp867x_check_ports(ap, i);
 462 #endif
 463                 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
 464                         (unsigned long)ioaddr->cmd_addr,
 465                         (unsigned long)ioaddr->ctl_addr);
 466                 ata_port_desc(ap, "bmdma 0x%lx",
 467                         (unsigned long)ioaddr->bmdma_addr);
 468
 469                 mask |= 1 << i;
 470         }
 471
 472         if (!mask) {
 473                 dev_err(gdev, "no available native port\n");
 474                 return -ENODEV;
 475         }
 476
 477         atp867x_fixup(host);
 478
 479         rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 480         if (rc)
 481                 return rc;
 482
 483         rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
 484         return rc;
 485 }
 486
 487 static int atp867x_init_one(struct pci_dev *pdev,
 488         const struct pci_device_id *id)
 489 {
 490         static const struct ata_port_info info_867x = {
 491                 .flags          = ATA_FLAG_SLAVE_POSS,
 492                 .pio_mask       = ATA_PIO4,
 493                 .udma_mask      = ATA_UDMA6,
 494                 .port_ops       = &atp867x_ops,
 495         };
 496
 497         struct ata_host *host;
 498         const struct ata_port_info *ppi[] = { &info_867x, NULL };
 499         int rc;
 500
 501         ata_print_version_once(&pdev->dev, DRV_VERSION);
 502
 503         rc = pcim_enable_device(pdev);
 504         if (rc)
 505                 return rc;
 506
 507         printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)",
 508                 pdev->device);
 509
 510         host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
 511         if (!host) {
 512                 dev_err(&pdev->dev, "failed to allocate ATA host\n");
 513                 rc = -ENOMEM;
 514                 goto err_out;
 515         }
 516
 517         rc = atp867x_ata_pci_sff_init_host(host);
 518         if (rc) {
 519                 dev_err(&pdev->dev, "failed to init host\n");
 520                 goto err_out;
 521         }
 522
 523         pci_set_master(pdev);
 524
 525         rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 526                                 IRQF_SHARED, &atp867x_sht);
 527         if (rc)
 528                 dev_err(&pdev->dev, "failed to activate host\n");
 529
 530 err_out:
 531         return rc;
 532 }
 533
 534 #ifdef CONFIG_PM
 535 static int atp867x_reinit_one(struct pci_dev *pdev)
 536 {
 537         struct ata_host *host = dev_get_drvdata(&pdev->dev);
 538         int rc;
 539
 540         rc = ata_pci_device_do_resume(pdev);
 541         if (rc)
 542                 return rc;
 543
 544         atp867x_fixup(host);
 545
 546         ata_host_resume(host);
 547         return 0;
 548 }
 549 #endif
 550
 551 static struct pci_device_id atp867x_pci_tbl[] = {
 552         { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A),      0 },
 553         { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B),      0 },
 554         { },
 555 };
 556
 557 static struct pci_driver atp867x_driver = {
 558         .name           = DRV_NAME,
 559         .id_table       = atp867x_pci_tbl,
 560         .probe          = atp867x_init_one,
 561         .remove         = ata_pci_remove_one,
 562 #ifdef CONFIG_PM
 563         .suspend        = ata_pci_device_suspend,
 564         .resume         = atp867x_reinit_one,
 565 #endif
 566 };
 567
 568 static int __init atp867x_init(void)
 569 {
 570         return pci_register_driver(&atp867x_driver);
 571 }
 572
 573 static void __exit atp867x_exit(void)
 574 {
 575         pci_unregister_driver(&atp867x_driver);
 576 }
 577
 578 MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc.");
 579 MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller");
 580 MODULE_LICENSE("GPL");
 581 MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl);
 582 MODULE_VERSION(DRV_VERSION);
 583
 584 module_init(atp867x_init);
 585 module_exit(atp867x_exit);