Avoid beyond bounds copy while caching ACL
[zen-stable.git] / drivers / input / mouse / elantech.h
blob46db3be45ac988710a821450bd37f5127bfc90c3
1 /*
2 * Elantech Touchpad driver (v6)
4 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
10 * Trademarks are the property of their respective owners.
13 #ifndef _ELANTECH_H
14 #define _ELANTECH_H
17 * Command values for Synaptics style queries
19 #define ETP_FW_ID_QUERY 0x00
20 #define ETP_FW_VERSION_QUERY 0x01
21 #define ETP_CAPABILITIES_QUERY 0x02
22 #define ETP_SAMPLE_QUERY 0x03
23 #define ETP_RESOLUTION_QUERY 0x04
26 * Command values for register reading or writing
28 #define ETP_REGISTER_READ 0x10
29 #define ETP_REGISTER_WRITE 0x11
30 #define ETP_REGISTER_READWRITE 0x00
33 * Hardware version 2 custom PS/2 command value
35 #define ETP_PS2_CUSTOM_COMMAND 0xf8
38 * Times to retry a ps2_command and millisecond delay between tries
40 #define ETP_PS2_COMMAND_TRIES 3
41 #define ETP_PS2_COMMAND_DELAY 500
44 * Times to try to read back a register and millisecond delay between tries
46 #define ETP_READ_BACK_TRIES 5
47 #define ETP_READ_BACK_DELAY 2000
50 * Register bitmasks for hardware version 1
52 #define ETP_R10_ABSOLUTE_MODE 0x04
53 #define ETP_R11_4_BYTE_MODE 0x02
56 * Capability bitmasks
58 #define ETP_CAP_HAS_ROCKER 0x04
61 * One hard to find application note states that X axis range is 0 to 576
62 * and Y axis range is 0 to 384 for harware version 1.
63 * Edge fuzz might be necessary because of bezel around the touchpad
65 #define ETP_EDGE_FUZZ_V1 32
67 #define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1)
68 #define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1)
69 #define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1)
70 #define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1)
73 * The resolution for older v2 hardware doubled.
74 * (newer v2's firmware provides command so we can query)
76 #define ETP_XMIN_V2 0
77 #define ETP_XMAX_V2 1152
78 #define ETP_YMIN_V2 0
79 #define ETP_YMAX_V2 768
81 #define ETP_PMIN_V2 0
82 #define ETP_PMAX_V2 255
83 #define ETP_WMIN_V2 0
84 #define ETP_WMAX_V2 15
87 * v3 hardware has 2 kinds of packet types,
88 * v4 hardware has 3.
90 #define PACKET_UNKNOWN 0x01
91 #define PACKET_DEBOUNCE 0x02
92 #define PACKET_V3_HEAD 0x03
93 #define PACKET_V3_TAIL 0x04
94 #define PACKET_V4_HEAD 0x05
95 #define PACKET_V4_MOTION 0x06
96 #define PACKET_V4_STATUS 0x07
99 * track up to 5 fingers for v4 hardware
101 #define ETP_MAX_FINGERS 5
104 * weight value for v4 hardware
106 #define ETP_WEIGHT_VALUE 5
109 * The base position for one finger, v4 hardware
111 struct finger_pos {
112 unsigned int x;
113 unsigned int y;
116 struct elantech_data {
117 unsigned char reg_07;
118 unsigned char reg_10;
119 unsigned char reg_11;
120 unsigned char reg_20;
121 unsigned char reg_21;
122 unsigned char reg_22;
123 unsigned char reg_23;
124 unsigned char reg_24;
125 unsigned char reg_25;
126 unsigned char reg_26;
127 unsigned char debug;
128 unsigned char capabilities[3];
129 bool paritycheck;
130 bool jumpy_cursor;
131 bool reports_pressure;
132 unsigned char hw_version;
133 unsigned int fw_version;
134 unsigned int single_finger_reports;
135 unsigned int y_max;
136 unsigned int width;
137 struct finger_pos mt[ETP_MAX_FINGERS];
138 unsigned char parity[256];
139 int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
142 #ifdef CONFIG_MOUSE_PS2_ELANTECH
143 int elantech_detect(struct psmouse *psmouse, bool set_properties);
144 int elantech_init(struct psmouse *psmouse);
145 #else
146 static inline int elantech_detect(struct psmouse *psmouse, bool set_properties)
148 return -ENOSYS;
150 static inline int elantech_init(struct psmouse *psmouse)
152 return -ENOSYS;
154 #endif /* CONFIG_MOUSE_PS2_ELANTECH */
156 #endif