drivers/media/dvb/frontends/mt312.c

   1 /*
   2     Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
   3
   4     Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
   5     Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org>
   6
   7     This program is free software; you can redistribute it and/or modify
   8     it under the terms of the GNU General Public License as published by
   9     the Free Software Foundation; either version 2 of the License, or
  10     (at your option) any later version.
  11
  12     This program is distributed in the hope that it will be useful,
  13     but WITHOUT ANY WARRANTY; without even the implied warranty of
  14     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15
  16     GNU General Public License for more details.
  17
  18     You should have received a copy of the GNU General Public License
  19     along with this program; if not, write to the Free Software
  20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21
  22     References:
  23     http://products.zarlink.com/product_profiles/MT312.htm
  24     http://products.zarlink.com/product_profiles/SL1935.htm
  25 */
  26
  27 #include <linux/delay.h>
  28 #include <linux/errno.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/string.h>
  33 #include <linux/slab.h>
  34
  35 #include "dvb_frontend.h"
  36 #include "mt312_priv.h"
  37 #include "mt312.h"
  38
  39
  40 struct mt312_state {
  41         struct i2c_adapter *i2c;
  42         /* configuration settings */
  43         const struct mt312_config *config;
  44         struct dvb_frontend frontend;
  45
  46         u8 id;
  47         unsigned long xtal;
  48         u8 freq_mult;
  49 };
  50
  51 static int debug;
  52 #define dprintk(args...) \
  53         do { \
  54                 if (debug) \
  55                         printk(KERN_DEBUG "mt312: " args); \
  56         } while (0)
  57
  58 #define MT312_PLL_CLK           10000000UL      /* 10 MHz */
  59 #define MT312_PLL_CLK_10_111    10111000UL      /* 10.111 MHz */
  60
  61 static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
  62                       u8 *buf, const size_t count)
  63 {
  64         int ret;
  65         struct i2c_msg msg[2];
  66         u8 regbuf[1] = { reg };
  67
  68         msg[0].addr = state->config->demod_address;
  69         msg[0].flags = 0;
  70         msg[0].buf = regbuf;
  71         msg[0].len = 1;
  72         msg[1].addr = state->config->demod_address;
  73         msg[1].flags = I2C_M_RD;
  74         msg[1].buf = buf;
  75         msg[1].len = count;
  76
  77         ret = i2c_transfer(state->i2c, msg, 2);
  78
  79         if (ret != 2) {
  80                 printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
  81                 return -EREMOTEIO;
  82         }
  83
  84         if (debug) {
  85                 int i;
  86                 dprintk("R(%d):", reg & 0x7f);
  87                 for (i = 0; i < count; i++)
  88                         printk(KERN_CONT " %02x", buf[i]);
  89                 printk("\n");
  90         }
  91
  92         return 0;
  93 }
  94
  95 static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg,
  96                        const u8 *src, const size_t count)
  97 {
  98         int ret;
  99         u8 buf[count + 1];
 100         struct i2c_msg msg;
 101
 102         if (debug) {
 103                 int i;
 104                 dprintk("W(%d):", reg & 0x7f);
 105                 for (i = 0; i < count; i++)
 106                         printk(KERN_CONT " %02x", src[i]);
 107                 printk("\n");
 108         }
 109
 110         buf[0] = reg;
 111         memcpy(&buf[1], src, count);
 112
 113         msg.addr = state->config->demod_address;
 114         msg.flags = 0;
 115         msg.buf = buf;
 116         msg.len = count + 1;
 117
 118         ret = i2c_transfer(state->i2c, &msg, 1);
 119
 120         if (ret != 1) {
 121                 dprintk("%s: ret == %d\n", __func__, ret);
 122                 return -EREMOTEIO;
 123         }
 124
 125         return 0;
 126 }
 127
 128 static inline int mt312_readreg(struct mt312_state *state,
 129                                 const enum mt312_reg_addr reg, u8 *val)
 130 {
 131         return mt312_read(state, reg, val, 1);
 132 }
 133
 134 static inline int mt312_writereg(struct mt312_state *state,
 135                                  const enum mt312_reg_addr reg, const u8 val)
 136 {
 137         return mt312_write(state, reg, &val, 1);
 138 }
 139
 140 static inline u32 mt312_div(u32 a, u32 b)
 141 {
 142         return (a + (b / 2)) / b;
 143 }
 144
 145 static int mt312_reset(struct mt312_state *state, const u8 full)
 146 {
 147         return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
 148 }
 149
 150 static int mt312_get_inversion(struct mt312_state *state,
 151                                fe_spectral_inversion_t *i)
 152 {
 153         int ret;
 154         u8 vit_mode;
 155
 156         ret = mt312_readreg(state, VIT_MODE, &vit_mode);
 157         if (ret < 0)
 158                 return ret;
 159
 160         if (vit_mode & 0x80)    /* auto inversion was used */
 161                 *i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
 162
 163         return 0;
 164 }
 165
 166 static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr)
 167 {
 168         int ret;
 169         u8 sym_rate_h;
 170         u8 dec_ratio;
 171         u16 sym_rat_op;
 172         u16 monitor;
 173         u8 buf[2];
 174
 175         ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h);
 176         if (ret < 0)
 177                 return ret;
 178
 179         if (sym_rate_h & 0x80) {
 180                 /* symbol rate search was used */
 181                 ret = mt312_writereg(state, MON_CTRL, 0x03);
 182                 if (ret < 0)
 183                         return ret;
 184
 185                 ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
 186                 if (ret < 0)
 187                         return ret;
 188
 189                 monitor = (buf[0] << 8) | buf[1];
 190
 191                 dprintk("sr(auto) = %u\n",
 192                        mt312_div(monitor * 15625, 4));
 193         } else {
 194                 ret = mt312_writereg(state, MON_CTRL, 0x05);
 195                 if (ret < 0)
 196                         return ret;
 197
 198                 ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
 199                 if (ret < 0)
 200                         return ret;
 201
 202                 dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
 203
 204                 ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf));
 205                 if (ret < 0)
 206                         return ret;
 207
 208                 sym_rat_op = (buf[0] << 8) | buf[1];
 209
 210                 dprintk("sym_rat_op=%d dec_ratio=%d\n",
 211                        sym_rat_op, dec_ratio);
 212                 dprintk("*sr(manual) = %lu\n",
 213                        (((state->xtal * 8192) / (sym_rat_op + 8192)) *
 214                         2) - dec_ratio);
 215         }
 216
 217         return 0;
 218 }
 219
 220 static int mt312_get_code_rate(struct mt312_state *state, fe_code_rate_t *cr)
 221 {
 222         const fe_code_rate_t fec_tab[8] =
 223             { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
 224                 FEC_AUTO, FEC_AUTO };
 225
 226         int ret;
 227         u8 fec_status;
 228
 229         ret = mt312_readreg(state, FEC_STATUS, &fec_status);
 230         if (ret < 0)
 231                 return ret;
 232
 233         *cr = fec_tab[(fec_status >> 4) & 0x07];
 234
 235         return 0;
 236 }
 237
 238 static int mt312_initfe(struct dvb_frontend *fe)
 239 {
 240         struct mt312_state *state = fe->demodulator_priv;
 241         int ret;
 242         u8 buf[2];
 243
 244         /* wake up */
 245         ret = mt312_writereg(state, CONFIG,
 246                         (state->freq_mult == 6 ? 0x88 : 0x8c));
 247         if (ret < 0)
 248                 return ret;
 249
 250         /* wait at least 150 usec */
 251         udelay(150);
 252
 253         /* full reset */
 254         ret = mt312_reset(state, 1);
 255         if (ret < 0)
 256                 return ret;
 257
 258 /* Per datasheet, write correct values. 09/28/03 ACCJr.
 259  * If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */
 260         {
 261                 u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02,
 262                                   0x01, 0x00, 0x00, 0x00 };
 263
 264                 ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def));
 265                 if (ret < 0)
 266                         return ret;
 267         }
 268
 269         switch (state->id) {
 270         case ID_ZL10313:
 271                 /* enable ADC */
 272                 ret = mt312_writereg(state, GPP_CTRL, 0x80);
 273                 if (ret < 0)
 274                         return ret;
 275
 276                 /* configure ZL10313 for optimal ADC performance */
 277                 buf[0] = 0x80;
 278                 buf[1] = 0xB0;
 279                 ret = mt312_write(state, HW_CTRL, buf, 2);
 280                 if (ret < 0)
 281                         return ret;
 282
 283                 /* enable MPEG output and ADCs */
 284                 ret = mt312_writereg(state, HW_CTRL, 0x00);
 285                 if (ret < 0)
 286                         return ret;
 287
 288                 ret = mt312_writereg(state, MPEG_CTRL, 0x00);
 289                 if (ret < 0)
 290                         return ret;
 291
 292                 break;
 293         }
 294
 295         /* SYS_CLK */
 296         buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
 297
 298         /* DISEQC_RATIO */
 299         buf[1] = mt312_div(state->xtal, 22000 * 4);
 300
 301         ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
 302         if (ret < 0)
 303                 return ret;
 304
 305         ret = mt312_writereg(state, SNR_THS_HIGH, 0x32);
 306         if (ret < 0)
 307                 return ret;
 308
 309         /* different MOCLK polarity */
 310         switch (state->id) {
 311         case ID_ZL10313:
 312                 buf[0] = 0x33;
 313                 break;
 314         default:
 315                 buf[0] = 0x53;
 316                 break;
 317         }
 318
 319         ret = mt312_writereg(state, OP_CTRL, buf[0]);
 320         if (ret < 0)
 321                 return ret;
 322
 323         /* TS_SW_LIM */
 324         buf[0] = 0x8c;
 325         buf[1] = 0x98;
 326
 327         ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
 328         if (ret < 0)
 329                 return ret;
 330
 331         ret = mt312_writereg(state, CS_SW_LIM, 0x69);
 332         if (ret < 0)
 333                 return ret;
 334
 335         return 0;
 336 }
 337
 338 static int mt312_send_master_cmd(struct dvb_frontend *fe,
 339                                  struct dvb_diseqc_master_cmd *c)
 340 {
 341         struct mt312_state *state = fe->demodulator_priv;
 342         int ret;
 343         u8 diseqc_mode;
 344
 345         if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
 346                 return -EINVAL;
 347
 348         ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 349         if (ret < 0)
 350                 return ret;
 351
 352         ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len);
 353         if (ret < 0)
 354                 return ret;
 355
 356         ret = mt312_writereg(state, DISEQC_MODE,
 357                              (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
 358                              | 0x04);
 359         if (ret < 0)
 360                 return ret;
 361
 362         /* is there a better way to wait for message to be transmitted */
 363         msleep(100);
 364
 365         /* set DISEQC_MODE[2:0] to zero if a return message is expected */
 366         if (c->msg[0] & 0x02) {
 367                 ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40));
 368                 if (ret < 0)
 369                         return ret;
 370         }
 371
 372         return 0;
 373 }
 374
 375 static int mt312_send_burst(struct dvb_frontend *fe, const fe_sec_mini_cmd_t c)
 376 {
 377         struct mt312_state *state = fe->demodulator_priv;
 378         const u8 mini_tab[2] = { 0x02, 0x03 };
 379
 380         int ret;
 381         u8 diseqc_mode;
 382
 383         if (c > SEC_MINI_B)
 384                 return -EINVAL;
 385
 386         ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 387         if (ret < 0)
 388                 return ret;
 389
 390         ret = mt312_writereg(state, DISEQC_MODE,
 391                              (diseqc_mode & 0x40) | mini_tab[c]);
 392         if (ret < 0)
 393                 return ret;
 394
 395         return 0;
 396 }
 397
 398 static int mt312_set_tone(struct dvb_frontend *fe, const fe_sec_tone_mode_t t)
 399 {
 400         struct mt312_state *state = fe->demodulator_priv;
 401         const u8 tone_tab[2] = { 0x01, 0x00 };
 402
 403         int ret;
 404         u8 diseqc_mode;
 405
 406         if (t > SEC_TONE_OFF)
 407                 return -EINVAL;
 408
 409         ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 410         if (ret < 0)
 411                 return ret;
 412
 413         ret = mt312_writereg(state, DISEQC_MODE,
 414                              (diseqc_mode & 0x40) | tone_tab[t]);
 415         if (ret < 0)
 416                 return ret;
 417
 418         return 0;
 419 }
 420
 421 static int mt312_set_voltage(struct dvb_frontend *fe, const fe_sec_voltage_t v)
 422 {
 423         struct mt312_state *state = fe->demodulator_priv;
 424         const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
 425         u8 val;
 426
 427         if (v > SEC_VOLTAGE_OFF)
 428                 return -EINVAL;
 429
 430         val = volt_tab[v];
 431         if (state->config->voltage_inverted)
 432                 val ^= 0x40;
 433
 434         return mt312_writereg(state, DISEQC_MODE, val);
 435 }
 436
 437 static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s)
 438 {
 439         struct mt312_state *state = fe->demodulator_priv;
 440         int ret;
 441         u8 status[3];
 442
 443         *s = 0;
 444
 445         ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status));
 446         if (ret < 0)
 447                 return ret;
 448
 449         dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x,"
 450                 " FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
 451
 452         if (status[0] & 0xc0)
 453                 *s |= FE_HAS_SIGNAL;    /* signal noise ratio */
 454         if (status[0] & 0x04)
 455                 *s |= FE_HAS_CARRIER;   /* qpsk carrier lock */
 456         if (status[2] & 0x02)
 457                 *s |= FE_HAS_VITERBI;   /* viterbi lock */
 458         if (status[2] & 0x04)
 459                 *s |= FE_HAS_SYNC;      /* byte align lock */
 460         if (status[0] & 0x01)
 461                 *s |= FE_HAS_LOCK;      /* qpsk lock */
 462
 463         return 0;
 464 }
 465
 466 static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber)
 467 {
 468         struct mt312_state *state = fe->demodulator_priv;
 469         int ret;
 470         u8 buf[3];
 471
 472         ret = mt312_read(state, RS_BERCNT_H, buf, 3);
 473         if (ret < 0)
 474                 return ret;
 475
 476         *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
 477
 478         return 0;
 479 }
 480
 481 static int mt312_read_signal_strength(struct dvb_frontend *fe,
 482                                       u16 *signal_strength)
 483 {
 484         struct mt312_state *state = fe->demodulator_priv;
 485         int ret;
 486         u8 buf[3];
 487         u16 agc;
 488         s16 err_db;
 489
 490         ret = mt312_read(state, AGC_H, buf, sizeof(buf));
 491         if (ret < 0)
 492                 return ret;
 493
 494         agc = (buf[0] << 6) | (buf[1] >> 2);
 495         err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
 496
 497         *signal_strength = agc;
 498
 499         dprintk("agc=%08x err_db=%hd\n", agc, err_db);
 500
 501         return 0;
 502 }
 503
 504 static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr)
 505 {
 506         struct mt312_state *state = fe->demodulator_priv;
 507         int ret;
 508         u8 buf[2];
 509
 510         ret = mt312_read(state, M_SNR_H, buf, sizeof(buf));
 511         if (ret < 0)
 512                 return ret;
 513
 514         *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
 515
 516         return 0;
 517 }
 518
 519 static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc)
 520 {
 521         struct mt312_state *state = fe->demodulator_priv;
 522         int ret;
 523         u8 buf[2];
 524
 525         ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf));
 526         if (ret < 0)
 527                 return ret;
 528
 529         *ubc = (buf[0] << 8) | buf[1];
 530
 531         return 0;
 532 }
 533
 534 static int mt312_set_frontend(struct dvb_frontend *fe)
 535 {
 536         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 537         struct mt312_state *state = fe->demodulator_priv;
 538         int ret;
 539         u8 buf[5], config_val;
 540         u16 sr;
 541
 542         const u8 fec_tab[10] =
 543             { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
 544         const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
 545
 546         dprintk("%s: Freq %d\n", __func__, p->frequency);
 547
 548         if ((p->frequency < fe->ops.info.frequency_min)
 549             || (p->frequency > fe->ops.info.frequency_max))
 550                 return -EINVAL;
 551
 552         if ((p->inversion < INVERSION_OFF)
 553             || (p->inversion > INVERSION_ON))
 554                 return -EINVAL;
 555
 556         if ((p->symbol_rate < fe->ops.info.symbol_rate_min)
 557             || (p->symbol_rate > fe->ops.info.symbol_rate_max))
 558                 return -EINVAL;
 559
 560         if ((p->fec_inner < FEC_NONE)
 561             || (p->fec_inner > FEC_AUTO))
 562                 return -EINVAL;
 563
 564         if ((p->fec_inner == FEC_4_5)
 565             || (p->fec_inner == FEC_8_9))
 566                 return -EINVAL;
 567
 568         switch (state->id) {
 569         case ID_VP310:
 570         /* For now we will do this only for the VP310.
 571          * It should be better for the mt312 as well,
 572          * but tuning will be slower. ACCJr 09/29/03
 573          */
 574                 ret = mt312_readreg(state, CONFIG, &config_val);
 575                 if (ret < 0)
 576                         return ret;
 577                 if (p->symbol_rate >= 30000000) {
 578                         /* Note that 30MS/s should use 90MHz */
 579                         if (state->freq_mult == 6) {
 580                                 /* We are running 60MHz */
 581                                 state->freq_mult = 9;
 582                                 ret = mt312_initfe(fe);
 583                                 if (ret < 0)
 584                                         return ret;
 585                         }
 586                 } else {
 587                         if (state->freq_mult == 9) {
 588                                 /* We are running 90MHz */
 589                                 state->freq_mult = 6;
 590                                 ret = mt312_initfe(fe);
 591                                 if (ret < 0)
 592                                         return ret;
 593                         }
 594                 }
 595                 break;
 596
 597         case ID_MT312:
 598         case ID_ZL10313:
 599                 break;
 600
 601         default:
 602                 return -EINVAL;
 603         }
 604
 605         if (fe->ops.tuner_ops.set_params) {
 606                 fe->ops.tuner_ops.set_params(fe);
 607                 if (fe->ops.i2c_gate_ctrl)
 608                         fe->ops.i2c_gate_ctrl(fe, 0);
 609         }
 610
 611         /* sr = (u16)(sr * 256.0 / 1000000.0) */
 612         sr = mt312_div(p->symbol_rate * 4, 15625);
 613
 614         /* SYM_RATE */
 615         buf[0] = (sr >> 8) & 0x3f;
 616         buf[1] = (sr >> 0) & 0xff;
 617
 618         /* VIT_MODE */
 619         buf[2] = inv_tab[p->inversion] | fec_tab[p->fec_inner];
 620
 621         /* QPSK_CTRL */
 622         buf[3] = 0x40;          /* swap I and Q before QPSK demodulation */
 623
 624         if (p->symbol_rate < 10000000)
 625                 buf[3] |= 0x04; /* use afc mode */
 626
 627         /* GO */
 628         buf[4] = 0x01;
 629
 630         ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf));
 631         if (ret < 0)
 632                 return ret;
 633
 634         mt312_reset(state, 0);
 635
 636         return 0;
 637 }
 638
 639 static int mt312_get_frontend(struct dvb_frontend *fe)
 640 {
 641         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 642         struct mt312_state *state = fe->demodulator_priv;
 643         int ret;
 644
 645         ret = mt312_get_inversion(state, &p->inversion);
 646         if (ret < 0)
 647                 return ret;
 648
 649         ret = mt312_get_symbol_rate(state, &p->symbol_rate);
 650         if (ret < 0)
 651                 return ret;
 652
 653         ret = mt312_get_code_rate(state, &p->fec_inner);
 654         if (ret < 0)
 655                 return ret;
 656
 657         return 0;
 658 }
 659
 660 static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 661 {
 662         struct mt312_state *state = fe->demodulator_priv;
 663
 664         u8 val = 0x00;
 665         int ret;
 666
 667         switch (state->id) {
 668         case ID_ZL10313:
 669                 ret = mt312_readreg(state, GPP_CTRL, &val);
 670                 if (ret < 0)
 671                         goto error;
 672
 673                 /* preserve this bit to not accidentally shutdown ADC */
 674                 val &= 0x80;
 675                 break;
 676         }
 677
 678         if (enable)
 679                 val |= 0x40;
 680         else
 681                 val &= ~0x40;
 682
 683         ret = mt312_writereg(state, GPP_CTRL, val);
 684
 685 error:
 686         return ret;
 687 }
 688
 689 static int mt312_sleep(struct dvb_frontend *fe)
 690 {
 691         struct mt312_state *state = fe->demodulator_priv;
 692         int ret;
 693         u8 config;
 694
 695         /* reset all registers to defaults */
 696         ret = mt312_reset(state, 1);
 697         if (ret < 0)
 698                 return ret;
 699
 700         if (state->id == ID_ZL10313) {
 701                 /* reset ADC */
 702                 ret = mt312_writereg(state, GPP_CTRL, 0x00);
 703                 if (ret < 0)
 704                         return ret;
 705
 706                 /* full shutdown of ADCs, mpeg bus tristated */
 707                 ret = mt312_writereg(state, HW_CTRL, 0x0d);
 708                 if (ret < 0)
 709                         return ret;
 710         }
 711
 712         ret = mt312_readreg(state, CONFIG, &config);
 713         if (ret < 0)
 714                 return ret;
 715
 716         /* enter standby */
 717         ret = mt312_writereg(state, CONFIG, config & 0x7f);
 718         if (ret < 0)
 719                 return ret;
 720
 721         return 0;
 722 }
 723
 724 static int mt312_get_tune_settings(struct dvb_frontend *fe,
 725                 struct dvb_frontend_tune_settings *fesettings)
 726 {
 727         fesettings->min_delay_ms = 50;
 728         fesettings->step_size = 0;
 729         fesettings->max_drift = 0;
 730         return 0;
 731 }
 732
 733 static void mt312_release(struct dvb_frontend *fe)
 734 {
 735         struct mt312_state *state = fe->demodulator_priv;
 736         kfree(state);
 737 }
 738
 739 #define MT312_SYS_CLK           90000000UL      /* 90 MHz */
 740 static struct dvb_frontend_ops mt312_ops = {
 741         .delsys = { SYS_DVBS },
 742         .info = {
 743                 .name = "Zarlink ???? DVB-S",
 744                 .frequency_min = 950000,
 745                 .frequency_max = 2150000,
 746                 /* FIXME: adjust freq to real used xtal */
 747                 .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128,
 748                 .symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */
 749                 .symbol_rate_max = MT312_SYS_CLK / 2,
 750                 .caps =
 751                     FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
 752                     FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
 753                     FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
 754                     FE_CAN_RECOVER
 755         },
 756
 757         .release = mt312_release,
 758
 759         .init = mt312_initfe,
 760         .sleep = mt312_sleep,
 761         .i2c_gate_ctrl = mt312_i2c_gate_ctrl,
 762
 763         .set_frontend = mt312_set_frontend,
 764         .get_frontend = mt312_get_frontend,
 765         .get_tune_settings = mt312_get_tune_settings,
 766
 767         .read_status = mt312_read_status,
 768         .read_ber = mt312_read_ber,
 769         .read_signal_strength = mt312_read_signal_strength,
 770         .read_snr = mt312_read_snr,
 771         .read_ucblocks = mt312_read_ucblocks,
 772
 773         .diseqc_send_master_cmd = mt312_send_master_cmd,
 774         .diseqc_send_burst = mt312_send_burst,
 775         .set_tone = mt312_set_tone,
 776         .set_voltage = mt312_set_voltage,
 777 };
 778
 779 struct dvb_frontend *mt312_attach(const struct mt312_config *config,
 780                                         struct i2c_adapter *i2c)
 781 {
 782         struct mt312_state *state = NULL;
 783
 784         /* allocate memory for the internal state */
 785         state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
 786         if (state == NULL)
 787                 goto error;
 788
 789         /* setup the state */
 790         state->config = config;
 791         state->i2c = i2c;
 792
 793         /* check if the demod is there */
 794         if (mt312_readreg(state, ID, &state->id) < 0)
 795                 goto error;
 796
 797         /* create dvb_frontend */
 798         memcpy(&state->frontend.ops, &mt312_ops,
 799                 sizeof(struct dvb_frontend_ops));
 800         state->frontend.demodulator_priv = state;
 801
 802         switch (state->id) {
 803         case ID_VP310:
 804                 strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S");
 805                 state->xtal = MT312_PLL_CLK;
 806                 state->freq_mult = 9;
 807                 break;
 808         case ID_MT312:
 809                 strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S");
 810                 state->xtal = MT312_PLL_CLK;
 811                 state->freq_mult = 6;
 812                 break;
 813         case ID_ZL10313:
 814                 strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S");
 815                 state->xtal = MT312_PLL_CLK_10_111;
 816                 state->freq_mult = 9;
 817                 break;
 818         default:
 819                 printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313"
 820                         " are supported chips.\n");
 821                 goto error;
 822         }
 823
 824         return &state->frontend;
 825
 826 error:
 827         kfree(state);
 828         return NULL;
 829 }
 830 EXPORT_SYMBOL(mt312_attach);
 831
 832 module_param(debug, int, 0644);
 833 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 834
 835 MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
 836 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
 837 MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
 838 MODULE_LICENSE("GPL");
 839