drivers/media/video/gspca/stv0680.c

   1 /*
   2  * STV0680 USB Camera Driver
   3  *
   4  * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com>
   5  *
   6  * This module is adapted from the in kernel v4l1 stv680 driver:
   7  *
   8  *  STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net)
   9  *
  10  * Thanks to STMicroelectronics for information on the usb commands, and
  11  * to Steve Miller at STM for his help and encouragement while I was
  12  * writing this driver.
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  27  *
  28  */
  29
  30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  31
  32 #define MODULE_NAME "stv0680"
  33
  34 #include "gspca.h"
  35
  36 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
  37 MODULE_DESCRIPTION("STV0680 USB Camera Driver");
  38 MODULE_LICENSE("GPL");
  39
  40 /* specific webcam descriptor */
  41 struct sd {
  42         struct gspca_dev gspca_dev;             /* !! must be the first item */
  43         struct v4l2_pix_format mode;
  44         u8 orig_mode;
  45         u8 video_mode;
  46         u8 current_mode;
  47 };
  48
  49 /* V4L2 controls supported by the driver */
  50 static const struct ctrl sd_ctrls[] = {
  51 };
  52
  53 static int stv_sndctrl(struct gspca_dev *gspca_dev, int set, u8 req, u16 val,
  54                        int size)
  55 {
  56         int ret = -1;
  57         u8 req_type = 0;
  58         unsigned int pipe = 0;
  59
  60         switch (set) {
  61         case 0: /*  0xc1  */
  62                 req_type = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
  63                 pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
  64                 break;
  65         case 1: /*  0x41  */
  66                 req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
  67                 pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
  68                 break;
  69         case 2: /*  0x80  */
  70                 req_type = USB_DIR_IN | USB_RECIP_DEVICE;
  71                 pipe = usb_rcvctrlpipe(gspca_dev->dev, 0);
  72                 break;
  73         case 3: /*  0x40  */
  74                 req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
  75                 pipe = usb_sndctrlpipe(gspca_dev->dev, 0);
  76                 break;
  77         }
  78
  79         ret = usb_control_msg(gspca_dev->dev, pipe,
  80                               req, req_type,
  81                               val, 0, gspca_dev->usb_buf, size, 500);
  82
  83         if ((ret < 0) && (req != 0x0a))
  84                 pr_err("usb_control_msg error %i, request = 0x%x, error = %i\n",
  85                        set, req, ret);
  86
  87         return ret;
  88 }
  89
  90 static int stv0680_handle_error(struct gspca_dev *gspca_dev, int ret)
  91 {
  92         stv_sndctrl(gspca_dev, 0, 0x80, 0, 0x02); /* Get Last Error */
  93         PDEBUG(D_ERR, "last error: %i,  command = 0x%x",
  94                gspca_dev->usb_buf[0], gspca_dev->usb_buf[1]);
  95         return ret;
  96 }
  97
  98 static int stv0680_get_video_mode(struct gspca_dev *gspca_dev)
  99 {
 100         /* Note not sure if this init of usb_buf is really necessary */
 101         memset(gspca_dev->usb_buf, 0, 8);
 102         gspca_dev->usb_buf[0] = 0x0f;
 103
 104         if (stv_sndctrl(gspca_dev, 0, 0x87, 0, 0x08) != 0x08) {
 105                 PDEBUG(D_ERR, "Get_Camera_Mode failed");
 106                 return stv0680_handle_error(gspca_dev, -EIO);
 107         }
 108
 109         return gspca_dev->usb_buf[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */
 110 }
 111
 112 static int stv0680_set_video_mode(struct gspca_dev *gspca_dev, u8 mode)
 113 {
 114         struct sd *sd = (struct sd *) gspca_dev;
 115
 116         if (sd->current_mode == mode)
 117                 return 0;
 118
 119         memset(gspca_dev->usb_buf, 0, 8);
 120         gspca_dev->usb_buf[0] = mode;
 121
 122         if (stv_sndctrl(gspca_dev, 3, 0x07, 0x0100, 0x08) != 0x08) {
 123                 PDEBUG(D_ERR, "Set_Camera_Mode failed");
 124                 return stv0680_handle_error(gspca_dev, -EIO);
 125         }
 126
 127         /* Verify we got what we've asked for */
 128         if (stv0680_get_video_mode(gspca_dev) != mode) {
 129                 PDEBUG(D_ERR, "Error setting camera video mode!");
 130                 return -EIO;
 131         }
 132
 133         sd->current_mode = mode;
 134
 135         return 0;
 136 }
 137
 138 /* this function is called at probe time */
 139 static int sd_config(struct gspca_dev *gspca_dev,
 140                         const struct usb_device_id *id)
 141 {
 142         int ret;
 143         struct sd *sd = (struct sd *) gspca_dev;
 144         struct cam *cam = &gspca_dev->cam;
 145
 146         /* Give the camera some time to settle, otherwise initalization will
 147            fail on hotplug, and yes it really needs a full second. */
 148         msleep(1000);
 149
 150         /* ping camera to be sure STV0680 is present */
 151         if (stv_sndctrl(gspca_dev, 0, 0x88, 0x5678, 0x02) != 0x02 ||
 152             gspca_dev->usb_buf[0] != 0x56 || gspca_dev->usb_buf[1] != 0x78) {
 153                 PDEBUG(D_ERR, "STV(e): camera ping failed!!");
 154                 return stv0680_handle_error(gspca_dev, -ENODEV);
 155         }
 156
 157         /* get camera descriptor */
 158         if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0200, 0x09) != 0x09)
 159                 return stv0680_handle_error(gspca_dev, -ENODEV);
 160
 161         if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0200, 0x22) != 0x22 ||
 162             gspca_dev->usb_buf[7] != 0xa0 || gspca_dev->usb_buf[8] != 0x23) {
 163                 PDEBUG(D_ERR, "Could not get descriptor 0200.");
 164                 return stv0680_handle_error(gspca_dev, -ENODEV);
 165         }
 166         if (stv_sndctrl(gspca_dev, 0, 0x8a, 0, 0x02) != 0x02)
 167                 return stv0680_handle_error(gspca_dev, -ENODEV);
 168         if (stv_sndctrl(gspca_dev, 0, 0x8b, 0, 0x24) != 0x24)
 169                 return stv0680_handle_error(gspca_dev, -ENODEV);
 170         if (stv_sndctrl(gspca_dev, 0, 0x85, 0, 0x10) != 0x10)
 171                 return stv0680_handle_error(gspca_dev, -ENODEV);
 172
 173         if (!(gspca_dev->usb_buf[7] & 0x09)) {
 174                 PDEBUG(D_ERR, "Camera supports neither CIF nor QVGA mode");
 175                 return -ENODEV;
 176         }
 177         if (gspca_dev->usb_buf[7] & 0x01)
 178                 PDEBUG(D_PROBE, "Camera supports CIF mode");
 179         if (gspca_dev->usb_buf[7] & 0x02)
 180                 PDEBUG(D_PROBE, "Camera supports VGA mode");
 181         if (gspca_dev->usb_buf[7] & 0x04)
 182                 PDEBUG(D_PROBE, "Camera supports QCIF mode");
 183         if (gspca_dev->usb_buf[7] & 0x08)
 184                 PDEBUG(D_PROBE, "Camera supports QVGA mode");
 185
 186         if (gspca_dev->usb_buf[7] & 0x01)
 187                 sd->video_mode = 0x00; /* CIF */
 188         else
 189                 sd->video_mode = 0x03; /* QVGA */
 190
 191         /* FW rev, ASIC rev, sensor ID  */
 192         PDEBUG(D_PROBE, "Firmware rev is %i.%i",
 193                gspca_dev->usb_buf[0], gspca_dev->usb_buf[1]);
 194         PDEBUG(D_PROBE, "ASIC rev is %i.%i",
 195                gspca_dev->usb_buf[2], gspca_dev->usb_buf[3]);
 196         PDEBUG(D_PROBE, "Sensor ID is %i",
 197                (gspca_dev->usb_buf[4]*16) + (gspca_dev->usb_buf[5]>>4));
 198
 199
 200         ret = stv0680_get_video_mode(gspca_dev);
 201         if (ret < 0)
 202                 return ret;
 203         sd->current_mode = sd->orig_mode = ret;
 204
 205         ret = stv0680_set_video_mode(gspca_dev, sd->video_mode);
 206         if (ret < 0)
 207                 return ret;
 208
 209         /* Get mode details */
 210         if (stv_sndctrl(gspca_dev, 0, 0x8f, 0, 0x10) != 0x10)
 211                 return stv0680_handle_error(gspca_dev, -EIO);
 212
 213         cam->bulk = 1;
 214         cam->bulk_nurbs = 1; /* The cam cannot handle more */
 215         cam->bulk_size = (gspca_dev->usb_buf[0] << 24) |
 216                          (gspca_dev->usb_buf[1] << 16) |
 217                          (gspca_dev->usb_buf[2] << 8) |
 218                          (gspca_dev->usb_buf[3]);
 219         sd->mode.width = (gspca_dev->usb_buf[4] << 8) |
 220                          (gspca_dev->usb_buf[5]);  /* 322, 356, 644 */
 221         sd->mode.height = (gspca_dev->usb_buf[6] << 8) |
 222                           (gspca_dev->usb_buf[7]); /* 242, 292, 484 */
 223         sd->mode.pixelformat = V4L2_PIX_FMT_STV0680;
 224         sd->mode.field = V4L2_FIELD_NONE;
 225         sd->mode.bytesperline = sd->mode.width;
 226         sd->mode.sizeimage = cam->bulk_size;
 227         sd->mode.colorspace = V4L2_COLORSPACE_SRGB;
 228
 229         /* origGain = gspca_dev->usb_buf[12]; */
 230
 231         cam->cam_mode = &sd->mode;
 232         cam->nmodes = 1;
 233
 234
 235         ret = stv0680_set_video_mode(gspca_dev, sd->orig_mode);
 236         if (ret < 0)
 237                 return ret;
 238
 239         if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0100, 0x12) != 0x12 ||
 240             gspca_dev->usb_buf[8] != 0x53 || gspca_dev->usb_buf[9] != 0x05) {
 241                 pr_err("Could not get descriptor 0100\n");
 242                 return stv0680_handle_error(gspca_dev, -EIO);
 243         }
 244
 245         return 0;
 246 }
 247
 248 /* this function is called at probe and resume time */
 249 static int sd_init(struct gspca_dev *gspca_dev)
 250 {
 251         return 0;
 252 }
 253
 254 /* -- start the camera -- */
 255 static int sd_start(struct gspca_dev *gspca_dev)
 256 {
 257         int ret;
 258         struct sd *sd = (struct sd *) gspca_dev;
 259
 260         ret = stv0680_set_video_mode(gspca_dev, sd->video_mode);
 261         if (ret < 0)
 262                 return ret;
 263
 264         if (stv_sndctrl(gspca_dev, 0, 0x85, 0, 0x10) != 0x10)
 265                 return stv0680_handle_error(gspca_dev, -EIO);
 266
 267         /* Start stream at:
 268            0x0000 = CIF (352x288)
 269            0x0100 = VGA (640x480)
 270            0x0300 = QVGA (320x240) */
 271         if (stv_sndctrl(gspca_dev, 1, 0x09, sd->video_mode << 8, 0x0) != 0x0)
 272                 return stv0680_handle_error(gspca_dev, -EIO);
 273
 274         return 0;
 275 }
 276
 277 static void sd_stopN(struct gspca_dev *gspca_dev)
 278 {
 279         /* This is a high priority command; it stops all lower order cmds */
 280         if (stv_sndctrl(gspca_dev, 1, 0x04, 0x0000, 0x0) != 0x0)
 281                 stv0680_handle_error(gspca_dev, -EIO);
 282 }
 283
 284 static void sd_stop0(struct gspca_dev *gspca_dev)
 285 {
 286         struct sd *sd = (struct sd *) gspca_dev;
 287
 288         if (!sd->gspca_dev.present)
 289                 return;
 290
 291         stv0680_set_video_mode(gspca_dev, sd->orig_mode);
 292 }
 293
 294 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 295                         u8 *data,
 296                         int len)
 297 {
 298         struct sd *sd = (struct sd *) gspca_dev;
 299
 300         /* Every now and then the camera sends a 16 byte packet, no idea
 301            what it contains, but it is not image data, when this
 302            happens the frame received before this packet is corrupt,
 303            so discard it. */
 304         if (len != sd->mode.sizeimage) {
 305                 gspca_dev->last_packet_type = DISCARD_PACKET;
 306                 return;
 307         }
 308
 309         /* Finish the previous frame, we do this upon reception of the next
 310            packet, even though it is already complete so that the strange 16
 311            byte packets send after a corrupt frame can discard it. */
 312         gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
 313
 314         /* Store the just received frame */
 315         gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
 316 }
 317
 318 /* sub-driver description */
 319 static const struct sd_desc sd_desc = {
 320         .name = MODULE_NAME,
 321         .ctrls = sd_ctrls,
 322         .nctrls = ARRAY_SIZE(sd_ctrls),
 323         .config = sd_config,
 324         .init = sd_init,
 325         .start = sd_start,
 326         .stopN = sd_stopN,
 327         .stop0 = sd_stop0,
 328         .pkt_scan = sd_pkt_scan,
 329 };
 330
 331 /* -- module initialisation -- */
 332 static const struct usb_device_id device_table[] = {
 333         {USB_DEVICE(0x0553, 0x0202)},
 334         {USB_DEVICE(0x041e, 0x4007)},
 335         {}
 336 };
 337 MODULE_DEVICE_TABLE(usb, device_table);
 338
 339 /* -- device connect -- */
 340 static int sd_probe(struct usb_interface *intf,
 341                         const struct usb_device_id *id)
 342 {
 343         return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
 344                                 THIS_MODULE);
 345 }
 346
 347 static struct usb_driver sd_driver = {
 348         .name = MODULE_NAME,
 349         .id_table = device_table,
 350         .probe = sd_probe,
 351         .disconnect = gspca_disconnect,
 352 #ifdef CONFIG_PM
 353         .suspend = gspca_suspend,
 354         .resume = gspca_resume,
 355 #endif
 356 };
 357
 358 module_usb_driver(sd_driver);