Avoid beyond bounds copy while caching ACL
[zen-stable.git] / drivers / video / backlight / omap1_bl.c
blobd8cde277ec83a691c658b9e0afef6c3aef63ffb4
1 /*
2 * Backlight driver for OMAP based boards.
4 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org>
6 * This package is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This package is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this package; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/platform_device.h>
25 #include <linux/fb.h>
26 #include <linux/backlight.h>
27 #include <linux/slab.h>
29 #include <mach/hardware.h>
30 #include <plat/board.h>
31 #include <plat/mux.h>
33 #define OMAPBL_MAX_INTENSITY 0xff
35 struct omap_backlight {
36 int powermode;
37 int current_intensity;
39 struct device *dev;
40 struct omap_backlight_config *pdata;
43 static void inline omapbl_send_intensity(int intensity)
45 omap_writeb(intensity, OMAP_PWL_ENABLE);
48 static void inline omapbl_send_enable(int enable)
50 omap_writeb(enable, OMAP_PWL_CLK_ENABLE);
53 static void omapbl_blank(struct omap_backlight *bl, int mode)
55 if (bl->pdata->set_power)
56 bl->pdata->set_power(bl->dev, mode);
58 switch (mode) {
59 case FB_BLANK_NORMAL:
60 case FB_BLANK_VSYNC_SUSPEND:
61 case FB_BLANK_HSYNC_SUSPEND:
62 case FB_BLANK_POWERDOWN:
63 omapbl_send_intensity(0);
64 omapbl_send_enable(0);
65 break;
67 case FB_BLANK_UNBLANK:
68 omapbl_send_intensity(bl->current_intensity);
69 omapbl_send_enable(1);
70 break;
74 #ifdef CONFIG_PM
75 static int omapbl_suspend(struct platform_device *pdev, pm_message_t state)
77 struct backlight_device *dev = platform_get_drvdata(pdev);
78 struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
80 omapbl_blank(bl, FB_BLANK_POWERDOWN);
81 return 0;
84 static int omapbl_resume(struct platform_device *pdev)
86 struct backlight_device *dev = platform_get_drvdata(pdev);
87 struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
89 omapbl_blank(bl, bl->powermode);
90 return 0;
92 #else
93 #define omapbl_suspend NULL
94 #define omapbl_resume NULL
95 #endif
97 static int omapbl_set_power(struct backlight_device *dev, int state)
99 struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
101 omapbl_blank(bl, state);
102 bl->powermode = state;
104 return 0;
107 static int omapbl_update_status(struct backlight_device *dev)
109 struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
111 if (bl->current_intensity != dev->props.brightness) {
112 if (bl->powermode == FB_BLANK_UNBLANK)
113 omapbl_send_intensity(dev->props.brightness);
114 bl->current_intensity = dev->props.brightness;
117 if (dev->props.fb_blank != bl->powermode)
118 omapbl_set_power(dev, dev->props.fb_blank);
120 return 0;
123 static int omapbl_get_intensity(struct backlight_device *dev)
125 struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
126 return bl->current_intensity;
129 static const struct backlight_ops omapbl_ops = {
130 .get_brightness = omapbl_get_intensity,
131 .update_status = omapbl_update_status,
134 static int omapbl_probe(struct platform_device *pdev)
136 struct backlight_properties props;
137 struct backlight_device *dev;
138 struct omap_backlight *bl;
139 struct omap_backlight_config *pdata = pdev->dev.platform_data;
141 if (!pdata)
142 return -ENXIO;
144 bl = kzalloc(sizeof(struct omap_backlight), GFP_KERNEL);
145 if (unlikely(!bl))
146 return -ENOMEM;
148 memset(&props, 0, sizeof(struct backlight_properties));
149 props.type = BACKLIGHT_RAW;
150 props.max_brightness = OMAPBL_MAX_INTENSITY;
151 dev = backlight_device_register("omap-bl", &pdev->dev, bl, &omapbl_ops,
152 &props);
153 if (IS_ERR(dev)) {
154 kfree(bl);
155 return PTR_ERR(dev);
158 bl->powermode = FB_BLANK_POWERDOWN;
159 bl->current_intensity = 0;
161 bl->pdata = pdata;
162 bl->dev = &pdev->dev;
164 platform_set_drvdata(pdev, dev);
166 omap_cfg_reg(PWL); /* Conflicts with UART3 */
168 dev->props.fb_blank = FB_BLANK_UNBLANK;
169 dev->props.brightness = pdata->default_intensity;
170 omapbl_update_status(dev);
172 printk(KERN_INFO "OMAP LCD backlight initialised\n");
174 return 0;
177 static int omapbl_remove(struct platform_device *pdev)
179 struct backlight_device *dev = platform_get_drvdata(pdev);
180 struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
182 backlight_device_unregister(dev);
183 kfree(bl);
185 return 0;
188 static struct platform_driver omapbl_driver = {
189 .probe = omapbl_probe,
190 .remove = omapbl_remove,
191 .suspend = omapbl_suspend,
192 .resume = omapbl_resume,
193 .driver = {
194 .name = "omap-bl",
198 module_platform_driver(omapbl_driver);
200 MODULE_AUTHOR("Andrzej Zaborowski <balrog@zabor.org>");
201 MODULE_DESCRIPTION("OMAP LCD Backlight driver");
202 MODULE_LICENSE("GPL");