arch/frv/kernel/head-uc-fr401.S

   1 /* head-uc-fr401.S: FR401/3/5 uc-linux specific bits of initialisation
   2  *
   3  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
   4  * Written by David Howells (dhowells@redhat.com)
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 #include <linux/init.h>
  13 #include <linux/threads.h>
  14 #include <linux/linkage.h>
  15 #include <asm/ptrace.h>
  16 #include <asm/page.h>
  17 #include <asm/spr-regs.h>
  18 #include <asm/mb86943a.h>
  19 #include "head.inc"
  20
  21
  22 #define __400_DBR0      0xfe000e00
  23 #define __400_DBR1      0xfe000e08
  24 #define __400_DBR2      0xfe000e10      /* not on FR401 */
  25 #define __400_DBR3      0xfe000e18      /* not on FR401 */
  26 #define __400_DAM0      0xfe000f00
  27 #define __400_DAM1      0xfe000f08
  28 #define __400_DAM2      0xfe000f10      /* not on FR401 */
  29 #define __400_DAM3      0xfe000f18      /* not on FR401 */
  30 #define __400_LGCR      0xfe000010
  31 #define __400_LCR       0xfe000100
  32 #define __400_LSBR      0xfe000c00
  33
  34         __INIT
  35         .balign         4
  36
  37 ###############################################################################
  38 #
  39 # describe the position and layout of the SDRAM controller registers
  40 #
  41 #       ENTRY:                  EXIT:
  42 # GR5   -                       cacheline size
  43 # GR11  -                       displacement of 2nd SDRAM addr reg from GR14
  44 # GR12  -                       displacement of 3rd SDRAM addr reg from GR14
  45 # GR13  -                       displacement of 4th SDRAM addr reg from GR14
  46 # GR14  -                       address of 1st SDRAM addr reg
  47 # GR15  -                       amount to shift address by to match SDRAM addr reg
  48 # GR26  &__head_reference       [saved]
  49 # GR30  LED address             [saved]
  50 # CC0   -                       T if DBR0 is present
  51 # CC1   -                       T if DBR1 is present
  52 # CC2   -                       T if DBR2 is present (not FR401/FR401A)
  53 # CC3   -                       T if DBR3 is present (not FR401/FR401A)
  54 #
  55 ###############################################################################
  56         .globl          __head_fr401_describe_sdram
  57 __head_fr401_describe_sdram:
  58         sethi.p         %hi(__400_DBR0),gr14
  59         setlo           %lo(__400_DBR0),gr14
  60         setlos.p        #__400_DBR1-__400_DBR0,gr11
  61         setlos          #__400_DBR2-__400_DBR0,gr12
  62         setlos.p        #__400_DBR3-__400_DBR0,gr13
  63         setlos          #32,gr5                 ; cacheline size
  64         setlos.p        #0,gr15                 ; amount to shift addr reg by
  65
  66         # specify which DBR regs are present
  67         setlos          #0x00ff,gr4
  68         movgs           gr4,cccr
  69         movsg           psr,gr3                 ; check for FR401/FR401A
  70         srli            gr3,#25,gr3
  71         subicc          gr3,#0x20>>1,gr0,icc0
  72         bnelr           icc0,#1
  73         setlos          #0x000f,gr4
  74         movgs           gr4,cccr
  75         bralr
  76
  77 ###############################################################################
  78 #
  79 # rearrange the bus controller registers
  80 #
  81 #       ENTRY:                  EXIT:
  82 # GR26  &__head_reference       [saved]
  83 # GR30  LED address             revised LED address
  84 #
  85 ###############################################################################
  86         .globl          __head_fr401_set_busctl
  87 __head_fr401_set_busctl:
  88         sethi.p         %hi(__400_LGCR),gr4
  89         setlo           %lo(__400_LGCR),gr4
  90         sethi.p         %hi(__400_LSBR),gr10
  91         setlo           %lo(__400_LSBR),gr10
  92         sethi.p         %hi(__400_LCR),gr11
  93         setlo           %lo(__400_LCR),gr11
  94
  95         # set the bus controller
  96         ldi             @(gr4,#0),gr5
  97         ori             gr5,#0xff,gr5           ; make sure all chip-selects are enabled
  98         sti             gr5,@(gr4,#0)
  99
 100         sethi.p         %hi(__region_CS1),gr4
 101         setlo           %lo(__region_CS1),gr4
 102         sethi.p         %hi(__region_CS1_M),gr5
 103         setlo           %lo(__region_CS1_M),gr5
 104         sethi.p         %hi(__region_CS1_C),gr6
 105         setlo           %lo(__region_CS1_C),gr6
 106         sti             gr4,@(gr10,#1*0x08)
 107         sti             gr5,@(gr10,#1*0x08+0x100)
 108         sti             gr6,@(gr11,#1*0x08)
 109         sethi.p         %hi(__region_CS2),gr4
 110         setlo           %lo(__region_CS2),gr4
 111         sethi.p         %hi(__region_CS2_M),gr5
 112         setlo           %lo(__region_CS2_M),gr5
 113         sethi.p         %hi(__region_CS2_C),gr6
 114         setlo           %lo(__region_CS2_C),gr6
 115         sti             gr4,@(gr10,#2*0x08)
 116         sti             gr5,@(gr10,#2*0x08+0x100)
 117         sti             gr6,@(gr11,#2*0x08)
 118         sethi.p         %hi(__region_CS3),gr4
 119         setlo           %lo(__region_CS3),gr4
 120         sethi.p         %hi(__region_CS3_M),gr5
 121         setlo           %lo(__region_CS3_M),gr5
 122         sethi.p         %hi(__region_CS3_C),gr6
 123         setlo           %lo(__region_CS3_C),gr6
 124         sti             gr4,@(gr10,#3*0x08)
 125         sti             gr5,@(gr10,#3*0x08+0x100)
 126         sti             gr6,@(gr11,#3*0x08)
 127         sethi.p         %hi(__region_CS4),gr4
 128         setlo           %lo(__region_CS4),gr4
 129         sethi.p         %hi(__region_CS4_M),gr5
 130         setlo           %lo(__region_CS4_M),gr5
 131         sethi.p         %hi(__region_CS4_C),gr6
 132         setlo           %lo(__region_CS4_C),gr6
 133         sti             gr4,@(gr10,#4*0x08)
 134         sti             gr5,@(gr10,#4*0x08+0x100)
 135         sti             gr6,@(gr11,#4*0x08)
 136         sethi.p         %hi(__region_CS5),gr4
 137         setlo           %lo(__region_CS5),gr4
 138         sethi.p         %hi(__region_CS5_M),gr5
 139         setlo           %lo(__region_CS5_M),gr5
 140         sethi.p         %hi(__region_CS5_C),gr6
 141         setlo           %lo(__region_CS5_C),gr6
 142         sti             gr4,@(gr10,#5*0x08)
 143         sti             gr5,@(gr10,#5*0x08+0x100)
 144         sti             gr6,@(gr11,#5*0x08)
 145         sethi.p         %hi(__region_CS6),gr4
 146         setlo           %lo(__region_CS6),gr4
 147         sethi.p         %hi(__region_CS6_M),gr5
 148         setlo           %lo(__region_CS6_M),gr5
 149         sethi.p         %hi(__region_CS6_C),gr6
 150         setlo           %lo(__region_CS6_C),gr6
 151         sti             gr4,@(gr10,#6*0x08)
 152         sti             gr5,@(gr10,#6*0x08+0x100)
 153         sti             gr6,@(gr11,#6*0x08)
 154         sethi.p         %hi(__region_CS7),gr4
 155         setlo           %lo(__region_CS7),gr4
 156         sethi.p         %hi(__region_CS7_M),gr5
 157         setlo           %lo(__region_CS7_M),gr5
 158         sethi.p         %hi(__region_CS7_C),gr6
 159         setlo           %lo(__region_CS7_C),gr6
 160         sti             gr4,@(gr10,#7*0x08)
 161         sti             gr5,@(gr10,#7*0x08+0x100)
 162         sti             gr6,@(gr11,#7*0x08)
 163         membar
 164         bar
 165
 166         # adjust LED bank address
 167         sethi.p         %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30
 168         setlo           %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30
 169         bralr
 170
 171 ###############################################################################
 172 #
 173 # determine the total SDRAM size
 174 #
 175 #       ENTRY:                  EXIT:
 176 # GR25  -                       SDRAM size
 177 # GR26  &__head_reference       [saved]
 178 # GR30  LED address             [saved]
 179 #
 180 ###############################################################################
 181         .globl          __head_fr401_survey_sdram
 182 __head_fr401_survey_sdram:
 183         sethi.p         %hi(__400_DAM0),gr11
 184         setlo           %lo(__400_DAM0),gr11
 185         sethi.p         %hi(__400_DBR0),gr12
 186         setlo           %lo(__400_DBR0),gr12
 187
 188         sethi.p         %hi(0xfe000000),gr17            ; unused SDRAM DBR value
 189         setlo           %lo(0xfe000000),gr17
 190         setlos          #0,gr25
 191
 192         ldi             @(gr12,#0x00),gr4               ; DAR0
 193         subcc           gr4,gr17,gr0,icc0
 194         beq             icc0,#0,__head_no_DCS0
 195         ldi             @(gr11,#0x00),gr6               ; DAM0: bits 31:20 match addr 31:20
 196         add             gr25,gr6,gr25
 197         addi            gr25,#1,gr25
 198 __head_no_DCS0:
 199
 200         ldi             @(gr12,#0x08),gr4               ; DAR1
 201         subcc           gr4,gr17,gr0,icc0
 202         beq             icc0,#0,__head_no_DCS1
 203         ldi             @(gr11,#0x08),gr6               ; DAM1: bits 31:20 match addr 31:20
 204         add             gr25,gr6,gr25
 205         addi            gr25,#1,gr25
 206 __head_no_DCS1:
 207
 208         # FR401/FR401A does not have DCS2/3
 209         movsg           psr,gr3
 210         srli            gr3,#25,gr3
 211         subicc          gr3,#0x20>>1,gr0,icc0
 212         beq             icc0,#0,__head_no_DCS3
 213
 214         ldi             @(gr12,#0x10),gr4               ; DAR2
 215         subcc           gr4,gr17,gr0,icc0
 216         beq             icc0,#0,__head_no_DCS2
 217         ldi             @(gr11,#0x10),gr6               ; DAM2: bits 31:20 match addr 31:20
 218         add             gr25,gr6,gr25
 219         addi            gr25,#1,gr25
 220 __head_no_DCS2:
 221
 222         ldi             @(gr12,#0x18),gr4               ; DAR3
 223         subcc           gr4,gr17,gr0,icc0
 224         beq             icc0,#0,__head_no_DCS3
 225         ldi             @(gr11,#0x18),gr6               ; DAM3: bits 31:20 match addr 31:20
 226         add             gr25,gr6,gr25
 227         addi            gr25,#1,gr25
 228 __head_no_DCS3:
 229         bralr
 230
 231 ###############################################################################
 232 #
 233 # set the protection map with the I/DAMPR registers
 234 #
 235 #       ENTRY:                  EXIT:
 236 # GR25  SDRAM size              [saved]
 237 # GR26  &__head_reference       [saved]
 238 # GR30  LED address             [saved]
 239 #
 240 ###############################################################################
 241         .globl          __head_fr401_set_protection
 242 __head_fr401_set_protection:
 243         movsg           lr,gr27
 244
 245         # set the I/O region protection registers for FR401/3/5
 246         sethi.p         %hi(__region_IO),gr5
 247         setlo           %lo(__region_IO),gr5
 248         ori             gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5
 249         movgs           gr0,iampr7
 250         movgs           gr5,dampr7                      ; General I/O tile
 251
 252         # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible
 253         # - start with the highest numbered registers
 254         sethi.p         %hi(__kernel_image_end),gr8
 255         setlo           %lo(__kernel_image_end),gr8
 256         sethi.p         %hi(32768),gr4                  ; allow for a maximal allocator bitmap
 257         setlo           %lo(32768),gr4
 258         add             gr8,gr4,gr8
 259         sethi.p         %hi(1024*2048-1),gr4            ; round up to nearest 2MiB
 260         setlo           %lo(1024*2048-1),gr4
 261         add.p           gr8,gr4,gr8
 262         not             gr4,gr4
 263         and             gr8,gr4,gr8
 264
 265         sethi.p         %hi(__page_offset),gr9
 266         setlo           %lo(__page_offset),gr9
 267         add             gr9,gr25,gr9
 268
 269         # GR8 = base of uncovered RAM
 270         # GR9 = top of uncovered RAM
 271
 272 #ifdef CONFIG_MB93093_PDK
 273         sethi.p         %hi(__region_CS2),gr4
 274         setlo           %lo(__region_CS2),gr4
 275         ori             gr4,#xAMPRx_SS_1Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr4
 276         movgs           gr4,dampr6
 277         movgs           gr0,iampr6
 278 #else
 279         call            __head_split_region
 280         movgs           gr4,iampr6
 281         movgs           gr5,dampr6
 282 #endif
 283         call            __head_split_region
 284         movgs           gr4,iampr5
 285         movgs           gr5,dampr5
 286         call            __head_split_region
 287         movgs           gr4,iampr4
 288         movgs           gr5,dampr4
 289         call            __head_split_region
 290         movgs           gr4,iampr3
 291         movgs           gr5,dampr3
 292         call            __head_split_region
 293         movgs           gr4,iampr2
 294         movgs           gr5,dampr2
 295         call            __head_split_region
 296         movgs           gr4,iampr1
 297         movgs           gr5,dampr1
 298
 299         # cover kernel core image with kernel-only segment
 300         sethi.p         %hi(__page_offset),gr8
 301         setlo           %lo(__page_offset),gr8
 302         call            __head_split_region
 303
 304 #ifdef CONFIG_PROTECT_KERNEL
 305         ori.p           gr4,#xAMPRx_S_KERNEL,gr4
 306         ori             gr5,#xAMPRx_S_KERNEL,gr5
 307 #endif
 308
 309         movgs           gr4,iampr0
 310         movgs           gr5,dampr0
 311         jmpl            @(gr27,gr0)