2 * Support for Cogent CSB726
4 * Copyright (c) 2008 Dmitry Eremin-Solenikov
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/init.h>
14 #include <linux/gpio.h>
15 #include <linux/platform_device.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/mtd/partitions.h>
18 #include <linux/sm501.h>
19 #include <linux/smsc911x.h>
21 #include <asm/mach-types.h>
22 #include <asm/mach/arch.h>
23 #include <mach/csb726.h>
24 #include <mach/mfp-pxa27x.h>
27 #include <mach/ohci.h>
28 #include <mach/pxa2xx-regs.h>
29 #include <mach/audio.h>
30 #include <mach/smemc.h>
36 * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
37 * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
39 * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
40 * XXX: 33 CS_5 for LAN9215 on R1
43 static unsigned long csb726_pin_config
[] = {
44 GPIO78_nCS_2
, /* EXP_CS */
45 GPIO79_nCS_3
, /* SMSC9215 */
46 GPIO80_nCS_4
, /* SM501 */
48 GPIO52_GPIO
, /* #SMSC9251 int */
49 GPIO53_GPIO
, /* SM501 int */
51 GPIO1_GPIO
, /* GPIO0 */
52 GPIO11_GPIO
, /* GPIO1 */
53 GPIO9_GPIO
, /* GPIO2 */
54 GPIO10_GPIO
, /* GPIO3 */
55 GPIO16_PWM0_OUT
, /* or GPIO4 */
56 GPIO17_PWM1_OUT
, /* or GPIO5 */
57 GPIO94_GPIO
, /* GPIO6 */
58 GPIO95_GPIO
, /* GPIO7 */
59 GPIO96_GPIO
, /* GPIO8 */
60 GPIO97_GPIO
, /* GPIO9 */
61 GPIO15_GPIO
, /* EXP_IRQ */
62 GPIO18_RDY
, /* EXP_WAIT */
64 GPIO0_GPIO
, /* PWR_INT */
65 GPIO104_GPIO
, /* PWR_OFF */
67 GPIO12_GPIO
, /* touch irq */
71 MFP_CFG_OUT(GPIO19
, AF1
, DRIVE_LOW
),/* SSP2_SYSCLK */
79 GPIO20_GPIO
, /* SDIO int */
86 GPIO100_GPIO
, /* SD CD */
87 GPIO101_GPIO
, /* SD WP */
90 GPIO29_AC97_SDATA_IN_0
,
91 GPIO30_AC97_SDATA_OUT
,
119 GPIO57_nIOIS16
, /* maybe unused */
121 GPIO98_GPIO
, /* CF IRQ */
122 GPIO99_GPIO
, /* CF CD */
123 GPIO103_GPIO
, /* Reset */
129 static struct pxamci_platform_data csb726_mci
= {
130 .detect_delay_ms
= 500,
131 .ocr_mask
= MMC_VDD_32_33
|MMC_VDD_33_34
,
133 .gpio_card_detect
= CSB726_GPIO_MMC_DETECT
,
134 .gpio_card_ro
= CSB726_GPIO_MMC_RO
,
138 static struct pxaohci_platform_data csb726_ohci_platform_data
= {
139 .port_mode
= PMM_NPS_MODE
,
140 .flags
= ENABLE_PORT1
| NO_OC_PROTECTION
,
143 static struct mtd_partition csb726_flash_partitions
[] = {
145 .name
= "Bootloader",
147 .size
= CSB726_FLASH_uMON
,
148 .mask_flags
= MTD_WRITEABLE
/* force read-only */
152 .offset
= MTDPART_OFS_APPEND
,
153 .size
= MTDPART_SIZ_FULL
,
157 static struct physmap_flash_data csb726_flash_data
= {
159 .parts
= csb726_flash_partitions
,
160 .nr_parts
= ARRAY_SIZE(csb726_flash_partitions
),
163 static struct resource csb726_flash_resources
[] = {
165 .start
= PXA_CS0_PHYS
,
166 .end
= PXA_CS0_PHYS
+ CSB726_FLASH_SIZE
- 1 ,
167 .flags
= IORESOURCE_MEM
,
171 static struct platform_device csb726_flash
= {
172 .name
= "physmap-flash",
174 .platform_data
= &csb726_flash_data
,
176 .resource
= csb726_flash_resources
,
177 .num_resources
= ARRAY_SIZE(csb726_flash_resources
),
180 static struct resource csb726_sm501_resources
[] = {
182 .start
= PXA_CS4_PHYS
,
183 .end
= PXA_CS4_PHYS
+ SZ_8M
- 1,
184 .flags
= IORESOURCE_MEM
,
185 .name
= "sm501-localmem",
188 .start
= PXA_CS4_PHYS
+ SZ_64M
- SZ_2M
,
189 .end
= PXA_CS4_PHYS
+ SZ_64M
- 1,
190 .flags
= IORESOURCE_MEM
,
191 .name
= "sm501-regs",
194 .start
= CSB726_IRQ_SM501
,
195 .end
= CSB726_IRQ_SM501
,
196 .flags
= IORESOURCE_IRQ
,
200 static struct sm501_initdata csb726_sm501_initdata
= {
201 /* .devices = SM501_USE_USB_HOST, */
202 .devices
= SM501_USE_USB_HOST
| SM501_USE_UART0
| SM501_USE_UART1
,
205 static struct sm501_platdata csb726_sm501_platdata
= {
206 .init
= &csb726_sm501_initdata
,
209 static struct platform_device csb726_sm501
= {
212 .num_resources
= ARRAY_SIZE(csb726_sm501_resources
),
213 .resource
= csb726_sm501_resources
,
215 .platform_data
= &csb726_sm501_platdata
,
219 static struct resource csb726_lan_resources
[] = {
221 .start
= PXA_CS3_PHYS
,
222 .end
= PXA_CS3_PHYS
+ SZ_64K
- 1,
223 .flags
= IORESOURCE_MEM
,
226 .start
= CSB726_IRQ_LAN
,
227 .end
= CSB726_IRQ_LAN
,
228 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE
,
232 struct smsc911x_platform_config csb726_lan_config
= {
233 .irq_polarity
= SMSC911X_IRQ_POLARITY_ACTIVE_LOW
,
234 .irq_type
= SMSC911X_IRQ_TYPE_PUSH_PULL
,
235 .flags
= SMSC911X_USE_32BIT
,
236 .phy_interface
= PHY_INTERFACE_MODE_MII
,
240 static struct platform_device csb726_lan
= {
243 .num_resources
= ARRAY_SIZE(csb726_lan_resources
),
244 .resource
= csb726_lan_resources
,
246 .platform_data
= &csb726_lan_config
,
250 static struct platform_device
*devices
[] __initdata
= {
256 static void __init
csb726_init(void)
258 pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config
));
259 /* __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
260 /* __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
261 __raw_writel((__raw_readl(MSC2
) & ~0xffff) | 0x7ff4, MSC2
); /* SM501 */
263 pxa_set_ffuart_info(NULL
);
264 pxa_set_btuart_info(NULL
);
265 pxa_set_stuart_info(NULL
);
266 pxa_set_i2c_info(NULL
);
267 pxa27x_set_i2c_power_info(NULL
);
268 pxa_set_mci_info(&csb726_mci
);
269 pxa_set_ohci_info(&csb726_ohci_platform_data
);
270 pxa_set_ac97_info(NULL
);
272 platform_add_devices(devices
, ARRAY_SIZE(devices
));
275 MACHINE_START(CSB726
, "Cogent CSB726")
276 .boot_params
= 0xa0000100,
277 .map_io
= pxa27x_map_io
,
278 .init_irq
= pxa27x_init_irq
,
279 .init_machine
= csb726_init
,