drivers/usb/gadget/at91_udc.h

   1 /*
   2  * Copyright (C) 2004 by Thomas Rathbone, HP Labs
   3  * Copyright (C) 2005 by Ivan Kokshaysky
   4  * Copyright (C) 2006 by SAN People
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  */
  11
  12 #ifndef AT91_UDC_H
  13 #define AT91_UDC_H
  14
  15 /*
  16  * USB Device Port (UDP) registers.
  17  * Based on AT91RM9200 datasheet revision E.
  18  */
  19
  20 #define AT91_UDP_FRM_NUM        0x00            /* Frame Number Register */
  21 #define     AT91_UDP_NUM        (0x7ff <<  0)   /* Frame Number */
  22 #define     AT91_UDP_FRM_ERR    (1     << 16)   /* Frame Error */
  23 #define     AT91_UDP_FRM_OK     (1     << 17)   /* Frame OK */
  24
  25 #define AT91_UDP_GLB_STAT       0x04            /* Global State Register */
  26 #define     AT91_UDP_FADDEN     (1 <<  0)       /* Function Address Enable */
  27 #define     AT91_UDP_CONFG      (1 <<  1)       /* Configured */
  28 #define     AT91_UDP_ESR        (1 <<  2)       /* Enable Send Resume */
  29 #define     AT91_UDP_RSMINPR    (1 <<  3)       /* Resume has been sent */
  30 #define     AT91_UDP_RMWUPE     (1 <<  4)       /* Remote Wake Up Enable */
  31
  32 #define AT91_UDP_FADDR          0x08            /* Function Address Register */
  33 #define     AT91_UDP_FADD       (0x7f << 0)     /* Function Address Value */
  34 #define     AT91_UDP_FEN        (1    << 8)     /* Function Enable */
  35
  36 #define AT91_UDP_IER            0x10            /* Interrupt Enable Register */
  37 #define AT91_UDP_IDR            0x14            /* Interrupt Disable Register */
  38 #define AT91_UDP_IMR            0x18            /* Interrupt Mask Register */
  39
  40 #define AT91_UDP_ISR            0x1c            /* Interrupt Status Register */
  41 #define     AT91_UDP_EP(n)      (1 << (n))      /* Endpoint Interrupt Status */
  42 #define     AT91_UDP_RXSUSP     (1 <<  8)       /* USB Suspend Interrupt Status */
  43 #define     AT91_UDP_RXRSM      (1 <<  9)       /* USB Resume Interrupt Status */
  44 #define     AT91_UDP_EXTRSM     (1 << 10)       /* External Resume Interrupt Status [AT91RM9200 only] */
  45 #define     AT91_UDP_SOFINT     (1 << 11)       /* Start of Frame Interrupt Status */
  46 #define     AT91_UDP_ENDBUSRES  (1 << 12)       /* End of Bus Reset Interrupt Status */
  47 #define     AT91_UDP_WAKEUP     (1 << 13)       /* USB Wakeup Interrupt Status [AT91RM9200 only] */
  48
  49 #define AT91_UDP_ICR            0x20            /* Interrupt Clear Register */
  50 #define AT91_UDP_RST_EP         0x28            /* Reset Endpoint Register */
  51
  52 #define AT91_UDP_CSR(n)         (0x30+((n)*4))  /* Endpoint Control/Status Registers 0-7 */
  53 #define     AT91_UDP_TXCOMP     (1 <<  0)       /* Generates IN packet with data previously written in DPR */
  54 #define     AT91_UDP_RX_DATA_BK0 (1 <<  1)      /* Receive Data Bank 0 */
  55 #define     AT91_UDP_RXSETUP    (1 <<  2)       /* Send STALL to the host */
  56 #define     AT91_UDP_STALLSENT  (1 <<  3)       /* Stall Sent / Isochronous error (Isochronous endpoints) */
  57 #define     AT91_UDP_TXPKTRDY   (1 <<  4)       /* Transmit Packet Ready */
  58 #define     AT91_UDP_FORCESTALL (1 <<  5)       /* Force Stall */
  59 #define     AT91_UDP_RX_DATA_BK1 (1 <<  6)      /* Receive Data Bank 1 */
  60 #define     AT91_UDP_DIR        (1 <<  7)       /* Transfer Direction */
  61 #define     AT91_UDP_EPTYPE     (7 <<  8)       /* Endpoint Type */
  62 #define         AT91_UDP_EPTYPE_CTRL            (0 <<  8)
  63 #define         AT91_UDP_EPTYPE_ISO_OUT         (1 <<  8)
  64 #define         AT91_UDP_EPTYPE_BULK_OUT        (2 <<  8)
  65 #define         AT91_UDP_EPTYPE_INT_OUT         (3 <<  8)
  66 #define         AT91_UDP_EPTYPE_ISO_IN          (5 <<  8)
  67 #define         AT91_UDP_EPTYPE_BULK_IN         (6 <<  8)
  68 #define         AT91_UDP_EPTYPE_INT_IN          (7 <<  8)
  69 #define     AT91_UDP_DTGLE      (1 << 11)       /* Data Toggle */
  70 #define     AT91_UDP_EPEDS      (1 << 15)       /* Endpoint Enable/Disable */
  71 #define     AT91_UDP_RXBYTECNT  (0x7ff << 16)   /* Number of bytes in FIFO */
  72
  73 #define AT91_UDP_FDR(n)         (0x50+((n)*4))  /* Endpoint FIFO Data Registers 0-7 */
  74
  75 #define AT91_UDP_TXVC           0x74            /* Transceiver Control Register */
  76 #define     AT91_UDP_TXVC_TXVDIS (1 << 8)       /* Transceiver Disable */
  77 #define     AT91_UDP_TXVC_PUON   (1 << 9)       /* PullUp On [AT91SAM9260 only] */
  78
  79 /*-------------------------------------------------------------------------*/
  80
  81 /*
  82  * controller driver data structures
  83  */
  84
  85 #define NUM_ENDPOINTS   6
  86
  87 /*
  88  * hardware won't disable bus reset, or resume while the controller
  89  * is suspended ... watching suspend helps keep the logic symmetric.
  90  */
  91 #define MINIMUS_INTERRUPTUS \
  92         (AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP)
  93
  94 struct at91_ep {
  95         struct usb_ep                   ep;
  96         struct list_head                queue;
  97         struct at91_udc                 *udc;
  98         void __iomem                    *creg;
  99
 100         unsigned                        maxpacket:16;
 101         u8                              int_mask;
 102         unsigned                        is_pingpong:1;
 103
 104         unsigned                        stopped:1;
 105         unsigned                        is_in:1;
 106         unsigned                        is_iso:1;
 107         unsigned                        fifo_bank:1;
 108
 109         const struct usb_endpoint_descriptor
 110                                         *desc;
 111 };
 112
 113 /*
 114  * driver is non-SMP, and just blocks IRQs whenever it needs
 115  * access protection for chip registers or driver state
 116  */
 117 struct at91_udc {
 118         struct usb_gadget               gadget;
 119         struct at91_ep                  ep[NUM_ENDPOINTS];
 120         struct usb_gadget_driver        *driver;
 121         unsigned                        vbus:1;
 122         unsigned                        enabled:1;
 123         unsigned                        clocked:1;
 124         unsigned                        suspended:1;
 125         unsigned                        req_pending:1;
 126         unsigned                        wait_for_addr_ack:1;
 127         unsigned                        wait_for_config_ack:1;
 128         unsigned                        selfpowered:1;
 129         unsigned                        active_suspend:1;
 130         u8                              addr;
 131         struct at91_udc_data            board;
 132         struct clk                      *iclk, *fclk;
 133         struct platform_device          *pdev;
 134         struct proc_dir_entry           *pde;
 135         void __iomem                    *udp_baseaddr;
 136         int                             udp_irq;
 137         spinlock_t                      lock;
 138         struct timer_list               vbus_timer;
 139         struct work_struct              vbus_timer_work;
 140 };
 141
 142 static inline struct at91_udc *to_udc(struct usb_gadget *g)
 143 {
 144         return container_of(g, struct at91_udc, gadget);
 145 }
 146
 147 struct at91_request {
 148         struct usb_request              req;
 149         struct list_head                queue;
 150 };
 151
 152 /*-------------------------------------------------------------------------*/
 153
 154 #ifdef VERBOSE_DEBUG
 155 #    define VDBG                DBG
 156 #else
 157 #    define VDBG(stuff...)      do{}while(0)
 158 #endif
 159
 160 #ifdef PACKET_TRACE
 161 #    define PACKET              VDBG
 162 #else
 163 #    define PACKET(stuff...)    do{}while(0)
 164 #endif
 165
 166 #define ERR(stuff...)           pr_err("udc: " stuff)
 167 #define WARNING(stuff...)       pr_warning("udc: " stuff)
 168 #define INFO(stuff...)          pr_info("udc: " stuff)
 169 #define DBG(stuff...)           pr_debug("udc: " stuff)
 170
 171 #endif
 172