tty/serial: atmel_serial: whitespace and braces modifications
[zen-stable.git] / drivers / staging / gma500 / cdv_device.c
blob87614e0d396a6a31132f11efa343014d1be60cf1
1 /**************************************************************************
2 * Copyright (c) 2011, Intel Corporation.
3 * All Rights Reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 **************************************************************************/
20 #include <linux/backlight.h>
21 #include <drm/drmP.h>
22 #include <drm/drm.h>
23 #include "psb_drm.h"
24 #include "psb_drv.h"
25 #include "psb_reg.h"
26 #include "psb_intel_reg.h"
27 #include "intel_bios.h"
28 #include "cdv_device.h"
30 #define VGA_SR_INDEX 0x3c4
31 #define VGA_SR_DATA 0x3c5
33 /* FIXME: should check if we are the active VGA device ?? */
34 static void cdv_disable_vga(struct drm_device *dev)
36 u8 sr1;
37 u32 vga_reg;
39 vga_reg = VGACNTRL;
41 outb(1, VGA_SR_INDEX);
42 sr1 = inb(VGA_SR_DATA);
43 outb(sr1 | 1<<5, VGA_SR_DATA);
44 udelay(300);
46 REG_WRITE(vga_reg, VGA_DISP_DISABLE);
47 REG_READ(vga_reg);
50 static int cdv_output_init(struct drm_device *dev)
52 struct drm_psb_private *dev_priv = dev->dev_private;
53 cdv_disable_vga(dev);
55 cdv_intel_crt_init(dev, &dev_priv->mode_dev);
56 cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
58 /* These bits indicate HDMI not SDVO on CDV, but we don't yet support
59 the HDMI interface */
60 if (REG_READ(SDVOB) & SDVO_DETECTED)
61 cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
62 if (REG_READ(SDVOC) & SDVO_DETECTED)
63 cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
64 return 0;
67 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
70 * Poulsbo Backlight Interfaces
73 #define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
74 #define BLC_PWM_FREQ_CALC_CONSTANT 32
75 #define MHz 1000000
77 #define PSB_BLC_PWM_PRECISION_FACTOR 10
78 #define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE
79 #define PSB_BLC_MIN_PWM_REG_FREQ 0x2
81 #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
82 #define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
84 static int cdv_brightness;
85 static struct backlight_device *cdv_backlight_device;
87 static int cdv_get_brightness(struct backlight_device *bd)
89 /* return locally cached var instead of HW read (due to DPST etc.) */
90 /* FIXME: ideally return actual value in case firmware fiddled with
91 it */
92 return cdv_brightness;
96 static int cdv_backlight_setup(struct drm_device *dev)
98 struct drm_psb_private *dev_priv = dev->dev_private;
99 unsigned long core_clock;
100 /* u32 bl_max_freq; */
101 /* unsigned long value; */
102 u16 bl_max_freq;
103 uint32_t value;
104 uint32_t blc_pwm_precision_factor;
106 /* get bl_max_freq and pol from dev_priv*/
107 if (!dev_priv->lvds_bl) {
108 dev_err(dev->dev, "Has no valid LVDS backlight info\n");
109 return -ENOENT;
111 bl_max_freq = dev_priv->lvds_bl->freq;
112 blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
114 core_clock = dev_priv->core_freq;
116 value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
117 value *= blc_pwm_precision_factor;
118 value /= bl_max_freq;
119 value /= blc_pwm_precision_factor;
121 if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
122 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
123 return -ERANGE;
124 else {
125 /* FIXME */
127 return 0;
130 static int cdv_set_brightness(struct backlight_device *bd)
132 int level = bd->props.brightness;
134 /* Percentage 1-100% being valid */
135 if (level < 1)
136 level = 1;
138 /*cdv_intel_lvds_set_brightness(dev, level); FIXME */
139 cdv_brightness = level;
140 return 0;
143 static const struct backlight_ops cdv_ops = {
144 .get_brightness = cdv_get_brightness,
145 .update_status = cdv_set_brightness,
148 static int cdv_backlight_init(struct drm_device *dev)
150 struct drm_psb_private *dev_priv = dev->dev_private;
151 int ret;
152 struct backlight_properties props;
154 memset(&props, 0, sizeof(struct backlight_properties));
155 props.max_brightness = 100;
156 props.type = BACKLIGHT_PLATFORM;
158 cdv_backlight_device = backlight_device_register("psb-bl",
159 NULL, (void *)dev, &cdv_ops, &props);
160 if (IS_ERR(cdv_backlight_device))
161 return PTR_ERR(cdv_backlight_device);
163 ret = cdv_backlight_setup(dev);
164 if (ret < 0) {
165 backlight_device_unregister(cdv_backlight_device);
166 cdv_backlight_device = NULL;
167 return ret;
169 cdv_backlight_device->props.brightness = 100;
170 cdv_backlight_device->props.max_brightness = 100;
171 backlight_update_status(cdv_backlight_device);
172 dev_priv->backlight_device = cdv_backlight_device;
173 return 0;
176 #endif
179 * Provide the Cedarview specific chip logic and low level methods
180 * for power management
182 * FIXME: we need to implement the apm/ospm base management bits
183 * for this and the MID devices.
186 static inline u32 CDV_MSG_READ32(uint port, uint offset)
188 int mcr = (0x10<<24) | (port << 16) | (offset << 8);
189 uint32_t ret_val = 0;
190 struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
191 pci_write_config_dword(pci_root, 0xD0, mcr);
192 pci_read_config_dword(pci_root, 0xD4, &ret_val);
193 pci_dev_put(pci_root);
194 return ret_val;
197 static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
199 int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
200 struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
201 pci_write_config_dword(pci_root, 0xD4, value);
202 pci_write_config_dword(pci_root, 0xD0, mcr);
203 pci_dev_put(pci_root);
206 #define PSB_APM_CMD 0x0
207 #define PSB_APM_STS 0x04
208 #define PSB_PM_SSC 0x20
209 #define PSB_PM_SSS 0x30
210 #define PSB_PWRGT_GFX_MASK 0x3
211 #define CDV_PWRGT_DISPLAY_CNTR 0x000fc00c
212 #define CDV_PWRGT_DISPLAY_STS 0x000fc00c
214 static void cdv_init_pm(struct drm_device *dev)
216 struct drm_psb_private *dev_priv = dev->dev_private;
217 u32 pwr_cnt;
218 int i;
220 dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
221 PSB_APMBA) & 0xFFFF;
222 dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
223 PSB_OSPMBA) & 0xFFFF;
225 /* Force power on for now */
226 pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
227 pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
229 outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
230 for (i = 0; i < 5; i++) {
231 u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
232 if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
233 break;
234 udelay(10);
236 pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
237 pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
238 outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
239 for (i = 0; i < 5; i++) {
240 u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
241 if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
242 break;
243 udelay(10);
248 * cdv_save_display_registers - save registers lost on suspend
249 * @dev: our DRM device
251 * Save the state we need in order to be able to restore the interface
252 * upon resume from suspend
254 * FIXME: review
256 static int cdv_save_display_registers(struct drm_device *dev)
258 return 0;
262 * cdv_restore_display_registers - restore lost register state
263 * @dev: our DRM device
265 * Restore register state that was lost during suspend and resume.
267 * FIXME: review
269 static int cdv_restore_display_registers(struct drm_device *dev)
271 return 0;
274 static int cdv_power_down(struct drm_device *dev)
276 return 0;
279 static int cdv_power_up(struct drm_device *dev)
281 return 0;
284 /* FIXME ? - shared with Poulsbo */
285 static void cdv_get_core_freq(struct drm_device *dev)
287 uint32_t clock;
288 struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
289 struct drm_psb_private *dev_priv = dev->dev_private;
291 pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
292 pci_read_config_dword(pci_root, 0xD4, &clock);
293 pci_dev_put(pci_root);
295 switch (clock & 0x07) {
296 case 0:
297 dev_priv->core_freq = 100;
298 break;
299 case 1:
300 dev_priv->core_freq = 133;
301 break;
302 case 2:
303 dev_priv->core_freq = 150;
304 break;
305 case 3:
306 dev_priv->core_freq = 178;
307 break;
308 case 4:
309 dev_priv->core_freq = 200;
310 break;
311 case 5:
312 case 6:
313 case 7:
314 dev_priv->core_freq = 266;
315 default:
316 dev_priv->core_freq = 0;
320 static int cdv_chip_setup(struct drm_device *dev)
322 cdv_get_core_freq(dev);
323 gma_intel_opregion_init(dev);
324 psb_intel_init_bios(dev);
325 return 0;
328 /* CDV is much like Poulsbo but has MID like SGX offsets and PM */
330 const struct psb_ops cdv_chip_ops = {
331 .name = "Cedartrail",
332 .accel_2d = 0,
333 .pipes = 2,
334 .sgx_offset = MRST_SGX_OFFSET,
335 .chip_setup = cdv_chip_setup,
337 .crtc_helper = &cdv_intel_helper_funcs,
338 .crtc_funcs = &cdv_intel_crtc_funcs,
340 .output_init = cdv_output_init,
342 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
343 .backlight_init = cdv_backlight_init,
344 #endif
346 .init_pm = cdv_init_pm,
347 .save_regs = cdv_save_display_registers,
348 .restore_regs = cdv_restore_display_registers,
349 .power_down = cdv_power_down,
350 .power_up = cdv_power_up,