tty/serial: atmel_serial: whitespace and braces modifications
[zen-stable.git] / drivers / staging / octeon / cvmx-helper-xaui.c
bloba11e6769e23490be94f1b14671a606e37e686c39
1 /***********************license start***************
2 * Author: Cavium Networks
4 * Contact: support@caviumnetworks.com
5 * This file is part of the OCTEON SDK
7 * Copyright (c) 2003-2008 Cavium Networks
9 * This file is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License, Version 2, as
11 * published by the Free Software Foundation.
13 * This file is distributed in the hope that it will be useful, but
14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16 * NONINFRINGEMENT. See the GNU General Public License for more
17 * details.
19 * You should have received a copy of the GNU General Public License
20 * along with this file; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 * or visit http://www.gnu.org/licenses/.
24 * This file may also be available under a different license from Cavium.
25 * Contact Cavium Networks for more information
26 ***********************license end**************************************/
29 * Functions for XAUI initialization, configuration,
30 * and monitoring.
34 #include <asm/octeon/octeon.h>
36 #include "cvmx-config.h"
38 #include "cvmx-helper.h"
40 #include "cvmx-pko-defs.h"
41 #include "cvmx-gmxx-defs.h"
42 #include "cvmx-pcsxx-defs.h"
44 void __cvmx_interrupt_gmxx_enable(int interface);
45 void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
46 void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
47 /**
48 * Probe a XAUI interface and determine the number of ports
49 * connected to it. The XAUI interface should still be down
50 * after this call.
52 * @interface: Interface to probe
54 * Returns Number of ports on the interface. Zero to disable.
56 int __cvmx_helper_xaui_probe(int interface)
58 int i;
59 union cvmx_gmxx_hg2_control gmx_hg2_control;
60 union cvmx_gmxx_inf_mode mode;
63 * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the
64 * interface needs to be enabled before IPD otherwise per port
65 * backpressure may not work properly.
67 mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
68 mode.s.en = 1;
69 cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64);
71 __cvmx_helper_setup_gmx(interface, 1);
74 * Setup PKO to support 16 ports for HiGig2 virtual
75 * ports. We're pointing all of the PKO packet ports for this
76 * interface to the XAUI. This allows us to use HiGig2
77 * backpressure per port.
79 for (i = 0; i < 16; i++) {
80 union cvmx_pko_mem_port_ptrs pko_mem_port_ptrs;
81 pko_mem_port_ptrs.u64 = 0;
83 * We set each PKO port to have equal priority in a
84 * round robin fashion.
86 pko_mem_port_ptrs.s.static_p = 0;
87 pko_mem_port_ptrs.s.qos_mask = 0xff;
88 /* All PKO ports map to the same XAUI hardware port */
89 pko_mem_port_ptrs.s.eid = interface * 4;
90 pko_mem_port_ptrs.s.pid = interface * 16 + i;
91 cvmx_write_csr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64);
94 /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */
95 gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface));
96 if (gmx_hg2_control.s.hg2tx_en)
97 return 16;
98 else
99 return 1;
103 * Bringup and enable a XAUI interface. After this call packet
104 * I/O should be fully functional. This is called with IPD
105 * enabled but PKO disabled.
107 * @interface: Interface to bring up
109 * Returns Zero on success, negative on failure
111 int __cvmx_helper_xaui_enable(int interface)
113 union cvmx_gmxx_prtx_cfg gmx_cfg;
114 union cvmx_pcsxx_control1_reg xauiCtl;
115 union cvmx_pcsxx_misc_ctl_reg xauiMiscCtl;
116 union cvmx_gmxx_tx_xaui_ctl gmxXauiTxCtl;
117 union cvmx_gmxx_rxx_int_en gmx_rx_int_en;
118 union cvmx_gmxx_tx_int_en gmx_tx_int_en;
119 union cvmx_pcsxx_int_en_reg pcsx_int_en_reg;
121 /* (1) Interface has already been enabled. */
123 /* (2) Disable GMX. */
124 xauiMiscCtl.u64 = cvmx_read_csr(CVMX_PCSXX_MISC_CTL_REG(interface));
125 xauiMiscCtl.s.gmxeno = 1;
126 cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
128 /* (3) Disable GMX and PCSX interrupts. */
129 gmx_rx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_EN(0, interface));
130 cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0);
131 gmx_tx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_TX_INT_EN(interface));
132 cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0);
133 pcsx_int_en_reg.u64 = cvmx_read_csr(CVMX_PCSXX_INT_EN_REG(interface));
134 cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0);
136 /* (4) Bring up the PCSX and GMX reconciliation layer. */
137 /* (4)a Set polarity and lane swapping. */
138 /* (4)b */
139 gmxXauiTxCtl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface));
140 /* Enable better IFG packing and improves performance */
141 gmxXauiTxCtl.s.dic_en = 1;
142 gmxXauiTxCtl.s.uni_en = 0;
143 cvmx_write_csr(CVMX_GMXX_TX_XAUI_CTL(interface), gmxXauiTxCtl.u64);
145 /* (4)c Aply reset sequence */
146 xauiCtl.u64 = cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface));
147 xauiCtl.s.lo_pwr = 0;
148 xauiCtl.s.reset = 1;
149 cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface), xauiCtl.u64);
151 /* Wait for PCS to come out of reset */
152 if (CVMX_WAIT_FOR_FIELD64
153 (CVMX_PCSXX_CONTROL1_REG(interface), union cvmx_pcsxx_control1_reg,
154 reset, ==, 0, 10000))
155 return -1;
156 /* Wait for PCS to be aligned */
157 if (CVMX_WAIT_FOR_FIELD64
158 (CVMX_PCSXX_10GBX_STATUS_REG(interface),
159 union cvmx_pcsxx_10gbx_status_reg, alignd, ==, 1, 10000))
160 return -1;
161 /* Wait for RX to be ready */
162 if (CVMX_WAIT_FOR_FIELD64
163 (CVMX_GMXX_RX_XAUI_CTL(interface), union cvmx_gmxx_rx_xaui_ctl,
164 status, ==, 0, 10000))
165 return -1;
167 /* (6) Configure GMX */
168 gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface));
169 gmx_cfg.s.en = 0;
170 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64);
172 /* Wait for GMX RX to be idle */
173 if (CVMX_WAIT_FOR_FIELD64
174 (CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg,
175 rx_idle, ==, 1, 10000))
176 return -1;
177 /* Wait for GMX TX to be idle */
178 if (CVMX_WAIT_FOR_FIELD64
179 (CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg,
180 tx_idle, ==, 1, 10000))
181 return -1;
183 /* GMX configure */
184 gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface));
185 gmx_cfg.s.speed = 1;
186 gmx_cfg.s.speed_msb = 0;
187 gmx_cfg.s.slottime = 1;
188 cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), 1);
189 cvmx_write_csr(CVMX_GMXX_TXX_SLOT(0, interface), 512);
190 cvmx_write_csr(CVMX_GMXX_TXX_BURST(0, interface), 8192);
191 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64);
193 /* (7) Clear out any error state */
194 cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(0, interface),
195 cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(0, interface)));
196 cvmx_write_csr(CVMX_GMXX_TX_INT_REG(interface),
197 cvmx_read_csr(CVMX_GMXX_TX_INT_REG(interface)));
198 cvmx_write_csr(CVMX_PCSXX_INT_REG(interface),
199 cvmx_read_csr(CVMX_PCSXX_INT_REG(interface)));
201 /* Wait for receive link */
202 if (CVMX_WAIT_FOR_FIELD64
203 (CVMX_PCSXX_STATUS1_REG(interface), union cvmx_pcsxx_status1_reg,
204 rcv_lnk, ==, 1, 10000))
205 return -1;
206 if (CVMX_WAIT_FOR_FIELD64
207 (CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg,
208 xmtflt, ==, 0, 10000))
209 return -1;
210 if (CVMX_WAIT_FOR_FIELD64
211 (CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg,
212 rcvflt, ==, 0, 10000))
213 return -1;
215 cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), gmx_rx_int_en.u64);
216 cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64);
217 cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64);
219 cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, 0));
221 /* (8) Enable packet reception */
222 xauiMiscCtl.s.gmxeno = 0;
223 cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
225 gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface));
226 gmx_cfg.s.en = 1;
227 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64);
229 __cvmx_interrupt_pcsx_intx_en_reg_enable(0, interface);
230 __cvmx_interrupt_pcsx_intx_en_reg_enable(1, interface);
231 __cvmx_interrupt_pcsx_intx_en_reg_enable(2, interface);
232 __cvmx_interrupt_pcsx_intx_en_reg_enable(3, interface);
233 __cvmx_interrupt_pcsxx_int_en_reg_enable(interface);
234 __cvmx_interrupt_gmxx_enable(interface);
236 return 0;
240 * Return the link state of an IPD/PKO port as returned by
241 * auto negotiation. The result of this function may not match
242 * Octeon's link config if auto negotiation has changed since
243 * the last call to cvmx_helper_link_set().
245 * @ipd_port: IPD/PKO port to query
247 * Returns Link state
249 cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port)
251 int interface = cvmx_helper_get_interface_num(ipd_port);
252 union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl;
253 union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl;
254 union cvmx_pcsxx_status1_reg pcsxx_status1_reg;
255 cvmx_helper_link_info_t result;
257 gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface));
258 gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface));
259 pcsxx_status1_reg.u64 =
260 cvmx_read_csr(CVMX_PCSXX_STATUS1_REG(interface));
261 result.u64 = 0;
263 /* Only return a link if both RX and TX are happy */
264 if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0) &&
265 (pcsxx_status1_reg.s.rcv_lnk == 1)) {
266 result.s.link_up = 1;
267 result.s.full_duplex = 1;
268 result.s.speed = 10000;
269 } else {
270 /* Disable GMX and PCSX interrupts. */
271 cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0);
272 cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0);
273 cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0);
275 return result;
279 * Configure an IPD/PKO port for the specified link state. This
280 * function does not influence auto negotiation at the PHY level.
281 * The passed link state must always match the link state returned
282 * by cvmx_helper_link_get(). It is normally best to use
283 * cvmx_helper_link_autoconf() instead.
285 * @ipd_port: IPD/PKO port to configure
286 * @link_info: The new link state
288 * Returns Zero on success, negative on failure
290 int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
292 int interface = cvmx_helper_get_interface_num(ipd_port);
293 union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl;
294 union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl;
296 gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface));
297 gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface));
299 /* If the link shouldn't be up, then just return */
300 if (!link_info.s.link_up)
301 return 0;
303 /* Do nothing if both RX and TX are happy */
304 if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0))
305 return 0;
307 /* Bring the link up */
308 return __cvmx_helper_xaui_enable(interface);
312 * Configure a port for internal and/or external loopback. Internal loopback
313 * causes packets sent by the port to be received by Octeon. External loopback
314 * causes packets received from the wire to sent out again.
316 * @ipd_port: IPD/PKO port to loopback.
317 * @enable_internal:
318 * Non zero if you want internal loopback
319 * @enable_external:
320 * Non zero if you want external loopback
322 * Returns Zero on success, negative on failure.
324 extern int __cvmx_helper_xaui_configure_loopback(int ipd_port,
325 int enable_internal,
326 int enable_external)
328 int interface = cvmx_helper_get_interface_num(ipd_port);
329 union cvmx_pcsxx_control1_reg pcsxx_control1_reg;
330 union cvmx_gmxx_xaui_ext_loopback gmxx_xaui_ext_loopback;
332 /* Set the internal loop */
333 pcsxx_control1_reg.u64 =
334 cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface));
335 pcsxx_control1_reg.s.loopbck1 = enable_internal;
336 cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface),
337 pcsxx_control1_reg.u64);
339 /* Set the external loop */
340 gmxx_xaui_ext_loopback.u64 =
341 cvmx_read_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface));
342 gmxx_xaui_ext_loopback.s.en = enable_external;
343 cvmx_write_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface),
344 gmxx_xaui_ext_loopback.u64);
346 /* Take the link through a reset */
347 return __cvmx_helper_xaui_enable(interface);