2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/jiffies.h>
29 #include <linux/timer.h>
30 #include <linux/sched.h>
31 #include <linux/semaphore.h>
32 #include <linux/wireless.h>
33 #include <linux/ieee80211.h>
34 #include <linux/interrupt.h>
36 #define KEY_TYPE_NA 0x0
37 #define KEY_TYPE_WEP40 0x1
38 #define KEY_TYPE_TKIP 0x2
39 #define KEY_TYPE_CCMP 0x4
40 #define KEY_TYPE_WEP104 0x5
44 #define MGMT_QUEUE_NUM 5
47 #define IEEE_CMD_SET_WPA_PARAM 1
48 #define IEEE_CMD_SET_WPA_IE 2
49 #define IEEE_CMD_SET_ENCRYPTION 3
50 #define IEEE_CMD_MLME 4
52 #define IEEE_PARAM_WPA_ENABLED 1
53 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
54 #define IEEE_PARAM_DROP_UNENCRYPTED 3
55 #define IEEE_PARAM_PRIVACY_INVOKED 4
56 #define IEEE_PARAM_AUTH_ALGS 5
57 #define IEEE_PARAM_IEEE_802_1X 6
58 //It should consistent with the driver_XXX.c
60 #define IEEE_PARAM_WPAX_SELECT 7
61 //Added for notify the encryption type selection
63 #define IEEE_PROTO_WPA 1
64 #define IEEE_PROTO_RSN 2
65 //Added for notify the encryption type selection
67 #define IEEE_WPAX_USEGROUP 0
68 #define IEEE_WPAX_WEP40 1
69 #define IEEE_WPAX_TKIP 2
70 #define IEEE_WPAX_WRAP 3
71 #define IEEE_WPAX_CCMP 4
72 #define IEEE_WPAX_WEP104 5
74 #define IEEE_KEY_MGMT_IEEE8021X 1
75 #define IEEE_KEY_MGMT_PSK 2
79 #define IEEE_MLME_STA_DEAUTH 1
80 #define IEEE_MLME_STA_DISASSOC 2
83 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
84 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
85 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
86 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
87 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
88 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
91 #define IEEE_CRYPT_ALG_NAME_LEN 16
94 typedef struct ieee_param
{
96 u8 sta_addr
[ETH_ALEN
];
112 u8 alg
[IEEE_CRYPT_ALG_NAME_LEN
];
116 u8 seq
[8]; /* sequence counter (set: RX, get: TX) */
125 #define MSECS(t) msecs_to_jiffies(t)
126 #define msleep_interruptible_rtl msleep_interruptible
128 #define IEEE80211_DATA_LEN 2304
129 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
132 The figure in section 7.1.2 suggests a body size of up to 2312
133 bytes is allowed, which is a bit confusing, I suspect this
134 represents the 2304 bytes of real data, plus a possible 8 bytes of
135 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
137 #define IEEE80211_3ADDR_LEN 24
138 #define IEEE80211_4ADDR_LEN 30
139 #define IEEE80211_FCS_LEN 4
140 #define IEEE80211_HLEN IEEE80211_4ADDR_LEN
141 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
142 #define IEEE80211_MGMT_HDR_LEN 24
143 #define IEEE80211_DATA_HDR3_LEN 24
144 #define IEEE80211_DATA_HDR4_LEN 30
146 #define MIN_FRAG_THRESHOLD 256U
147 #define MAX_FRAG_THRESHOLD 2346U
149 /* Frame control field constants */
150 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
151 #define IEEE80211_FCTL_WEP 0x4000
155 #ifdef CONFIG_IEEE80211_DEBUG
156 extern u32 ieee80211_debug_level
;
157 #define IEEE80211_DEBUG(level, fmt, args...) \
158 do { if (ieee80211_debug_level & (level)) \
159 printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
160 in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
162 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
163 #endif /* CONFIG_IEEE80211_DEBUG */
166 * To use the debug system;
168 * If you are defining a new debug classification, simply add it to the #define
169 * list here in the form of:
171 * #define IEEE80211_DL_xxxx VALUE
173 * shifting value to the left one bit from the previous entry. xxxx should be
174 * the name of the classification (for example, WEP)
176 * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
177 * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
178 * to send output to that classification.
180 * To add your debug level to the list of levels seen when you perform
182 * % cat /proc/net/ipw/debug_level
184 * you simply need to add your entry to the ipw_debug_levels array.
186 * If you do not see debug_level in /proc/net/ipw then you do not have
187 * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
191 #define IEEE80211_DL_INFO (1<<0)
192 #define IEEE80211_DL_WX (1<<1)
193 #define IEEE80211_DL_SCAN (1<<2)
194 #define IEEE80211_DL_STATE (1<<3)
195 #define IEEE80211_DL_MGMT (1<<4)
196 #define IEEE80211_DL_FRAG (1<<5)
197 #define IEEE80211_DL_EAP (1<<6)
198 #define IEEE80211_DL_DROP (1<<7)
200 #define IEEE80211_DL_TX (1<<8)
201 #define IEEE80211_DL_RX (1<<9)
203 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
204 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
205 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
207 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
208 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
209 //#define IEEE_DEBUG_SCAN IEEE80211_WARNING
210 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
211 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
212 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
213 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
214 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
215 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
216 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
217 #include <linux/netdevice.h>
218 #include <linux/if_arp.h> /* ARPHRD_ETHER */
221 #define WIRELESS_SPY // enable iwspy support
223 #include <net/iw_handler.h> // new driver API
226 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
227 #endif /* ETH_P_PAE */
229 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
231 #ifndef ETH_P_80211_RAW
232 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
235 /* IEEE 802.11 defines */
237 #define P80211_OUI_LEN 3
239 struct ieee80211_snap_hdr
{
241 u8 dsap
; /* always 0xAA */
242 u8 ssap
; /* always 0xAA */
243 u8 ctrl
; /* always 0x03 */
244 u8 oui
[P80211_OUI_LEN
]; /* organizational universal id */
246 } __attribute__ ((packed
));
248 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
250 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
251 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
253 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
254 #define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ)
256 #define WLAN_CAPABILITY_BSS (1<<0)
257 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
259 #define IEEE80211_STATMASK_SIGNAL (1<<0)
260 #define IEEE80211_STATMASK_RSSI (1<<1)
261 #define IEEE80211_STATMASK_NOISE (1<<2)
262 #define IEEE80211_STATMASK_RATE (1<<3)
263 #define IEEE80211_STATMASK_WEMASK 0x7
266 #define IEEE80211_CCK_MODULATION (1<<0)
267 #define IEEE80211_OFDM_MODULATION (1<<1)
269 #define IEEE80211_24GHZ_BAND (1<<0)
270 #define IEEE80211_52GHZ_BAND (1<<1)
272 #define IEEE80211_CCK_RATE_LEN 4
273 #define IEEE80211_CCK_RATE_1MB 0x02
274 #define IEEE80211_CCK_RATE_2MB 0x04
275 #define IEEE80211_CCK_RATE_5MB 0x0B
276 #define IEEE80211_CCK_RATE_11MB 0x16
277 #define IEEE80211_OFDM_RATE_LEN 8
278 #define IEEE80211_OFDM_RATE_6MB 0x0C
279 #define IEEE80211_OFDM_RATE_9MB 0x12
280 #define IEEE80211_OFDM_RATE_12MB 0x18
281 #define IEEE80211_OFDM_RATE_18MB 0x24
282 #define IEEE80211_OFDM_RATE_24MB 0x30
283 #define IEEE80211_OFDM_RATE_36MB 0x48
284 #define IEEE80211_OFDM_RATE_48MB 0x60
285 #define IEEE80211_OFDM_RATE_54MB 0x6C
286 #define IEEE80211_BASIC_RATE_MASK 0x80
288 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
289 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
290 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
291 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
292 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
293 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
294 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
295 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
296 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
297 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
298 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
299 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
301 #define IEEE80211_CCK_RATES_MASK 0x0000000F
302 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
303 IEEE80211_CCK_RATE_2MB_MASK)
304 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
305 IEEE80211_CCK_RATE_5MB_MASK | \
306 IEEE80211_CCK_RATE_11MB_MASK)
308 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
309 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
310 IEEE80211_OFDM_RATE_12MB_MASK | \
311 IEEE80211_OFDM_RATE_24MB_MASK)
312 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
313 IEEE80211_OFDM_RATE_9MB_MASK | \
314 IEEE80211_OFDM_RATE_18MB_MASK | \
315 IEEE80211_OFDM_RATE_36MB_MASK | \
316 IEEE80211_OFDM_RATE_48MB_MASK | \
317 IEEE80211_OFDM_RATE_54MB_MASK)
318 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
319 IEEE80211_CCK_DEFAULT_RATES_MASK)
321 #define IEEE80211_NUM_OFDM_RATES 8
322 #define IEEE80211_NUM_CCK_RATES 4
323 #define IEEE80211_OFDM_SHIFT_MASK_A 4
325 /* this is stolen and modified from the madwifi driver*/
326 #define IEEE80211_FC0_TYPE_MASK 0x0c
327 #define IEEE80211_FC0_TYPE_DATA 0x08
328 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
329 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
331 #define IEEE80211_QOS_HAS_SEQ(fc) \
332 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
333 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
335 /* this is stolen from ipw2200 driver */
336 #define IEEE_IBSS_MAC_HASH_SIZE 31
337 struct ieee_ibss_seq
{
341 unsigned long packet_time
[17];
342 struct list_head list
;
345 /* NOTE: This data is for statistical purposes; not all hardware provides this
346 * information for frames received. Not setting these will not cause
347 * any adverse affects. */
348 struct ieee80211_rx_stats
{
354 u16 rate
; /* in 100 kbps */
363 /* IEEE 802.11 requires that STA supports concurrent reception of at least
364 * three fragmented frames. This define can be increased to support more
365 * concurrent frames, but it should be noted that each entry can consume about
366 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
367 #define IEEE80211_FRAG_CACHE_LEN 4
369 struct ieee80211_frag_entry
{
370 unsigned long first_frag_time
;
372 unsigned int last_frag
;
374 u8 src_addr
[ETH_ALEN
];
375 u8 dst_addr
[ETH_ALEN
];
378 struct ieee80211_stats
{
379 unsigned int tx_unicast_frames
;
380 unsigned int tx_multicast_frames
;
381 unsigned int tx_fragments
;
382 unsigned int tx_unicast_octets
;
383 unsigned int tx_multicast_octets
;
384 unsigned int tx_deferred_transmissions
;
385 unsigned int tx_single_retry_frames
;
386 unsigned int tx_multiple_retry_frames
;
387 unsigned int tx_retry_limit_exceeded
;
388 unsigned int tx_discards
;
389 unsigned int rx_unicast_frames
;
390 unsigned int rx_multicast_frames
;
391 unsigned int rx_fragments
;
392 unsigned int rx_unicast_octets
;
393 unsigned int rx_multicast_octets
;
394 unsigned int rx_fcs_errors
;
395 unsigned int rx_discards_no_buffer
;
396 unsigned int tx_discards_wrong_sa
;
397 unsigned int rx_discards_undecryptable
;
398 unsigned int rx_message_in_msg_fragments
;
399 unsigned int rx_message_in_bad_msg_fragments
;
402 struct ieee80211_device
;
404 #include "ieee80211_crypt.h"
406 #define SEC_KEY_1 (1<<0)
407 #define SEC_KEY_2 (1<<1)
408 #define SEC_KEY_3 (1<<2)
409 #define SEC_KEY_4 (1<<3)
410 #define SEC_ACTIVE_KEY (1<<4)
411 #define SEC_AUTH_MODE (1<<5)
412 #define SEC_UNICAST_GROUP (1<<6)
413 #define SEC_LEVEL (1<<7)
414 #define SEC_ENABLED (1<<8)
416 #define SEC_LEVEL_0 0 /* None */
417 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
418 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
419 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
420 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
423 #define WEP_KEY_LEN 13
425 #define WEP_KEY_LEN_MODIF 32
427 struct ieee80211_security
{
432 unicast_uses_group
:1;
433 u8 key_sizes
[WEP_KEYS
];
434 u8 keys
[WEP_KEYS
][WEP_KEY_LEN_MODIF
];
437 } __attribute__ ((packed
));
442 802.11 data frame from AP
444 ,-------------------------------------------------------------------.
445 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
446 |------|------|---------|---------|---------|------|---------|------|
447 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
448 | | tion | (BSSID) | | | ence | data | |
449 `-------------------------------------------------------------------'
455 /* Management Frame Information Element Types */
459 MFIE_TYPE_FH_SET
= 2,
460 MFIE_TYPE_DS_SET
= 3,
461 MFIE_TYPE_CF_SET
= 4,
463 MFIE_TYPE_IBSS_SET
= 6,
464 MFIE_TYPE_COUNTRY
= 7,
465 MFIE_TYPE_CHALLENGE
= 16,
468 MFIE_TYPE_RATES_EX
= 50,
469 MFIE_TYPE_GENERIC
= 221,
472 struct ieee80211_header_data
{
481 struct ieee80211_hdr_4addr
{
489 } __attribute__ ((packed
));
491 struct ieee80211_hdr_3addrqos
{
499 } __attribute__ ((packed
));
501 struct ieee80211_hdr_4addrqos
{
510 } __attribute__ ((packed
));
512 struct ieee80211_info_element_hdr
{
515 } __attribute__ ((packed
));
517 struct ieee80211_info_element
{
521 } __attribute__ ((packed
));
523 struct ieee80211_authentication
{
524 struct ieee80211_header_data header
;
528 //struct ieee80211_info_element_hdr info_element;
529 } __attribute__ ((packed
));
531 struct ieee80211_disassoc_frame
{
532 struct ieee80211_hdr_3addr header
;
534 } __attribute__ ((packed
));
536 struct ieee80211_probe_request
{
537 struct ieee80211_header_data header
;
538 /* struct ieee80211_info_element info_element; */
539 } __attribute__ ((packed
));
541 struct ieee80211_probe_response
{
542 struct ieee80211_header_data header
;
546 struct ieee80211_info_element info_element
;
547 } __attribute__ ((packed
));
549 struct ieee80211_assoc_request_frame
{
550 struct ieee80211_hdr_3addr header
;
553 //u8 current_ap[ETH_ALEN];
554 struct ieee80211_info_element_hdr info_element
;
555 } __attribute__ ((packed
));
557 struct ieee80211_assoc_response_frame
{
558 struct ieee80211_hdr_3addr header
;
562 struct ieee80211_info_element info_element
; /* supported rates */
563 } __attribute__ ((packed
));
565 struct ieee80211_txb
{
571 struct sk_buff
*fragments
[0];
574 /* SWEEP TABLE ENTRIES NUMBER */
575 #define MAX_SWEEP_TAB_ENTRIES 42
576 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
578 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
579 * only use 8, and then use extended rates for the remaining supported
580 * rates. Other APs, however, stick all of their supported rates on the
581 * main rates information element... */
582 #define MAX_RATES_LENGTH ((u8)12)
583 #define MAX_RATES_EX_LENGTH ((u8)16)
585 #define MAX_NETWORK_COUNT 128
587 #define MAX_CHANNEL_NUMBER 165
589 #define IEEE80211_SOFTMAC_SCAN_TIME 100 /* (HZ / 2) */
590 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
592 #define CRC_LENGTH 4U
594 #define MAX_WPA_IE_LEN 64
596 #define NETWORK_EMPTY_ESSID (1 << 0)
597 #define NETWORK_HAS_OFDM (1 << 1)
598 #define NETWORK_HAS_CCK (1 << 2)
600 struct ieee80211_wmm_ac_param
{
606 struct ieee80211_wmm_ts_info
{
610 } __attribute__ ((packed
));
612 struct ieee80211_wmm_tspec_elem
{
613 struct ieee80211_wmm_ts_info ts_info
;
629 }__attribute__((packed
));
636 EAPOL_ENCAP_ASF_ALERT
639 static const char *eap_types
[] = {
640 [EAP_PACKET
] = "EAP-Packet",
641 [EAPOL_START
] = "EAPOL-Start",
642 [EAPOL_LOGOFF
] = "EAPOL-Logoff",
643 [EAPOL_KEY
] = "EAPOL-Key",
644 [EAPOL_ENCAP_ASF_ALERT
] = "EAPOL-Encap-ASF-Alert"
647 static inline const char *eap_get_type(int type
)
649 return (type
>= ARRAY_SIZE(eap_types
)) ? "Unknown" : eap_types
[type
];
658 } __attribute__ ((packed
));
660 struct ieee80211_softmac_stats
{
661 unsigned int rx_ass_ok
;
662 unsigned int rx_ass_err
;
663 unsigned int rx_probe_rq
;
664 unsigned int tx_probe_rs
;
665 unsigned int tx_beacons
;
666 unsigned int rx_auth_rq
;
667 unsigned int rx_auth_rs_ok
;
668 unsigned int rx_auth_rs_err
;
669 unsigned int tx_auth_rq
;
670 unsigned int no_auth_rs
;
671 unsigned int no_ass_rs
;
672 unsigned int tx_ass_rq
;
673 unsigned int rx_ass_rq
;
674 unsigned int tx_probe_rq
;
675 unsigned int reassoc
;
676 unsigned int swtxstop
;
677 unsigned int swtxawake
;
680 #define BEACON_PROBE_SSID_ID_POSITION 12
683 * These are the data types that can make up management packets
689 u8 current_ap[ETH_ALEN];
692 u16 association_id:14, reserved:2;
693 } __attribute__ ((packed));
699 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
700 #define IEEE80211_DEFAULT_BASIC_RATE 10
702 enum {WMM_all_frame
, WMM_two_frame
, WMM_four_frame
, WMM_six_frame
};
703 #define MAX_SP_Len (WMM_all_frame << 4)
704 #define IEEE80211_QOS_TID 0x0f
705 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
707 #define MAX_IE_LEN 0xFF //+YJ,080625
709 typedef struct _CHANNEL_LIST
{
710 u8 Channel
[MAX_CHANNEL_NUMBER
+ 1];
712 }CHANNEL_LIST
, *PCHANNEL_LIST
;
715 #define IEEE80211_WATCH_DOG_TIME 2000
718 #define ANTENNA_DIVERSITY_TIMER_PERIOD 1000 // 1000 m
721 #define IEEE80211_DTIM_MBCAST 4
722 #define IEEE80211_DTIM_UCAST 2
723 #define IEEE80211_DTIM_VALID 1
724 #define IEEE80211_DTIM_INVALID 0
726 #define IEEE80211_PS_DISABLED 0
727 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
728 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
729 #define IEEE80211_PS_ENABLE IEEE80211_DTIM_VALID
730 //added by David for QoS 2006/6/30
731 //#define WMM_Hang_8187
736 #define WME_AC_BE 0x00
737 #define WME_AC_BK 0x01
738 #define WME_AC_VI 0x02
739 #define WME_AC_VO 0x03
740 #define WME_ACI_MASK 0x03
741 #define WME_AIFSN_MASK 0x03
742 #define WME_AC_PRAM_LEN 16
744 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
745 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
746 #define UP2AC(up) ( \
747 ((up) < 1) ? WME_AC_BE : \
748 ((up) < 3) ? WME_AC_BK : \
749 ((up) < 4) ? WME_AC_BE : \
750 ((up) < 6) ? WME_AC_VI : \
752 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
753 #define AC2UP(_ac) ( \
754 ((_ac) == WME_AC_VO) ? 6 : \
755 ((_ac) == WME_AC_VI) ? 5 : \
756 ((_ac) == WME_AC_BK) ? 1 : \
759 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
760 struct ether_header
{
761 u8 ether_dhost
[ETHER_ADDR_LEN
];
762 u8 ether_shost
[ETHER_ADDR_LEN
];
764 } __attribute__((packed
));
766 #ifndef ETHERTYPE_PAE
767 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
770 #define ETHERTYPE_IP 0x0800 /* IP protocol */
773 struct ieee80211_network
{
774 /* These entries are used to identify a unique network */
777 /* Ensure null-terminated for any debug msgs */
778 u8 ssid
[IW_ESSID_MAX_SIZE
+ 1];
781 /* These are network statistics */
782 struct ieee80211_rx_stats stats
;
784 u8 rates
[MAX_RATES_LENGTH
];
786 u8 rates_ex
[MAX_RATES_EX_LENGTH
];
788 unsigned long last_scanned
;
796 u8 wpa_ie
[MAX_WPA_IE_LEN
];
798 u8 rsn_ie
[MAX_WPA_IE_LEN
];
802 u32 last_dtim_sta_time
[2];
803 struct list_head list
;
806 struct ieee80211_wmm_ac_param wmm_param
[4];
812 u8 Turbo_Enable
;//enable turbo mode, added by thomas
814 u8 CountryIeBuf
[MAX_IE_LEN
];
817 enum ieee80211_state
{
819 /* the card is not linked at all */
820 IEEE80211_NOLINK
= 0,
822 /* IEEE80211_ASSOCIATING* are for BSS client mode
823 * the driver shall not perform RX filtering unless
824 * the state is LINKED.
825 * The driver shall just check for the state LINKED and
826 * defaults to NOLINK for ALL the other states (including
830 /* the association procedure will start (wq scheduling)*/
831 IEEE80211_ASSOCIATING
,
832 IEEE80211_ASSOCIATING_RETRY
,
834 /* the association procedure is sending AUTH request*/
835 IEEE80211_ASSOCIATING_AUTHENTICATING
,
837 /* the association procedure has successfully authentcated
838 * and is sending association request
840 IEEE80211_ASSOCIATING_AUTHENTICATED
,
842 /* the link is ok. the card associated to a BSS or linked
843 * to a ibss cell or acting as an AP and creating the bss
847 /* same as LINKED, but the driver shall apply RX filter
848 * rules as we are in NO_LINK mode. As the card is still
849 * logically linked, but it is doing a syncro site survey
850 * then it will be back to LINKED state.
852 IEEE80211_LINKED_SCANNING
,
856 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
857 #define DEFAULT_FTS 2346
859 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
860 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
862 typedef struct tx_pending_t
{
864 struct ieee80211_txb
*txb
;
868 COUNTRY_CODE_FCC
= 0,
870 COUNTRY_CODE_ETSI
= 2,
871 COUNTRY_CODE_SPAIN
= 3,
872 COUNTRY_CODE_FRANCE
= 4,
873 COUNTRY_CODE_MKK
= 5,
874 COUNTRY_CODE_MKK1
= 6,
875 COUNTRY_CODE_ISRAEL
= 7,
876 COUNTRY_CODE_TELEC
= 8,
877 COUNTRY_CODE_GLOBAL_DOMAIN
= 9,
878 COUNTRY_CODE_WORLD_WIDE_13_INDEX
= 10
881 struct ieee80211_device
{
882 struct net_device
*dev
;
884 /* Bookkeeping structures */
885 struct net_device_stats stats
;
886 struct ieee80211_stats ieee_stats
;
887 struct ieee80211_softmac_stats softmac_stats
;
889 /* Probe / Beacon management */
890 struct list_head network_free_list
;
891 struct list_head network_list
;
892 struct ieee80211_network
*networks
;
896 int iw_mode
; /* operating mode (IW_MODE_*) */
899 spinlock_t wpax_suitlist_lock
;
901 int tx_headroom
; /* Set to size of any additional room needed at front
902 * of allocated Tx SKBs */
905 /* WEP and other encryption related settings at the device level */
906 int open_wep
; /* Set to 1 to allow unencrypted frames */
908 int reset_on_keychange
; /* Set to 1 if the HW needs to be reset on
911 /* If the host performs {en,de}cryption, then set to 1 */
914 int ieee802_1x
; /* is IEEE 802.1X used */
918 int drop_unencrypted
;
919 int tkip_countermeasures
;
925 u16 pairwise_key_type
;
926 u16 broadcast_key_type
;
928 struct list_head crypt_deinit_list
;
929 struct ieee80211_crypt_data
*crypt
[WEP_KEYS
];
930 int tx_keyidx
; /* default TX key index (crypt[tx_keyidx]) */
931 struct timer_list crypt_deinit_timer
;
933 int bcrx_sta_key
; /* use individual keys to override default keys even
934 * with RX of broad/multicast frames */
936 /* Fragmentation structures */
937 // each streaming contain a entry
938 struct ieee80211_frag_entry frag_cache
[17][IEEE80211_FRAG_CACHE_LEN
];
939 unsigned int frag_next_idx
[17];
940 u16 fts
; /* Fragmentation Threshold */
942 /* This stores infos for the current network.
943 * Either the network we are associated in INFRASTRUCTURE
944 * or the network that we are creating in MASTER mode.
945 * ad-hoc is a mixture ;-).
946 * Note that in infrastructure mode, even when not associated,
947 * fields bssid and essid may be valid (if wpa_set and essid_set
948 * are true) as thy carry the value set by the user via iwconfig
950 struct ieee80211_network current_network
;
953 enum ieee80211_state state
;
956 int mode
; /* A, B, G */
957 int modulation
; /* CCK, OFDM */
958 int freq_band
; /* 2.4Ghz, 5.2Ghz, Mixed */
959 int abg_true
; /* ABG flag */
961 /* used for forcing the ibss workqueue to terminate
962 * without wait for the syncro scan to terminate
964 short sync_scan_hurryup
;
969 // For Liteon Ch12~13 passive scan
970 u8 MinPassiveChnlNum
;
973 int rate
; /* current rate */
975 //FIXME: pleace callback, see if redundant with softmac_features
978 /* this contains flags for selectively enable softmac support */
979 u16 softmac_features
;
981 /* if the sequence control field is not filled by HW */
984 /* association procedure transaction sequence number */
987 /* AID for RTXed association responses */
990 /* power save mode related*/
994 struct tasklet_struct ps_task
;
999 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1002 short proto_started
;
1004 struct semaphore wx_sem
;
1005 struct semaphore scan_sem
;
1007 spinlock_t mgmt_tx_lock
;
1008 spinlock_t beacon_lock
;
1015 u8 wpax_type_set
; //{added by David, 2006.9.28}
1016 u32 wpax_type_notify
; //{added by David, 2006.9.26}
1018 /* QoS related flag */
1019 char init_wmmparam_flag
;
1021 /* for discarding duplicated packets in IBSS */
1022 struct list_head ibss_mac_hash
[IEEE_IBSS_MAC_HASH_SIZE
];
1024 /* for discarding duplicated packets in BSS */
1025 u16 last_rxseq_num
[17]; /* rx seq previous per-tid */
1026 u16 last_rxfrag_num
[17];/* tx frag previous per-tid */
1027 unsigned long last_packet_time
[17];
1030 unsigned long last_rx_ps_time
;
1032 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
1033 struct sk_buff
*mgmt_queue_ring
[MGMT_QUEUE_NUM
];
1034 int mgmt_queue_head
;
1035 int mgmt_queue_tail
;
1038 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1039 struct tx_pending_t tx_pending
;
1041 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
1042 struct timer_list associate_timer
;
1044 /* used if IEEE_SOFTMAC_BEACONS is set */
1045 struct timer_list beacon_timer
;
1047 struct work_struct associate_complete_wq
;
1048 // struct work_struct associate_retry_wq;
1049 struct work_struct associate_procedure_wq
;
1050 // struct work_struct softmac_scan_wq;
1051 struct work_struct wx_sync_scan_wq
;
1052 struct work_struct wmm_param_update_wq
;
1053 struct work_struct ps_request_tx_ack_wq
;//for ps
1054 // struct work_struct hw_wakeup_wq;
1055 // struct work_struct hw_sleep_wq;
1056 // struct work_struct watch_dog_wq;
1061 unsigned long NumRxDataInPeriod
; //YJ,add,080828
1062 unsigned long NumRxBcnInPeriod
; //YJ,add,080828
1063 unsigned long NumRxOkTotal
;
1064 unsigned long NumRxUnicast
;//YJ,add,080828,for keep alive
1066 struct delayed_work softmac_scan_wq
;
1067 struct delayed_work associate_retry_wq
;
1068 struct delayed_work hw_wakeup_wq
;
1069 struct delayed_work hw_sleep_wq
;//+by amy 080324
1070 struct delayed_work watch_dog_wq
;
1071 struct delayed_work sw_antenna_wq
;
1072 struct delayed_work start_ibss_wq
;
1073 //by amy for rate adaptive 080312
1074 struct delayed_work rate_adapter_wq
;
1075 //by amy for rate adaptive
1076 struct delayed_work hw_dig_wq
;
1077 struct delayed_work tx_pw_wq
;
1079 //Added for RF power on power off by lizhaoming 080512
1080 struct delayed_work GPIOChangeRFWorkItem
;
1082 struct workqueue_struct
*wq
;
1084 /* Callback functions */
1085 void (*set_security
)(struct net_device
*dev
,
1086 struct ieee80211_security
*sec
);
1088 /* Used to TX data frame by using txb structs.
1089 * this is not used if in the softmac_features
1090 * is set the flag IEEE_SOFTMAC_TX_QUEUE
1092 int (*hard_start_xmit
)(struct ieee80211_txb
*txb
,
1093 struct net_device
*dev
);
1095 int (*reset_port
)(struct net_device
*dev
);
1097 /* Softmac-generated frames (mamagement) are TXed via this
1098 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
1099 * not set. As some cards may have different HW queues that
1100 * one might want to use for data and management frames
1101 * the option to have two callbacks might be useful.
1102 * This function can't sleep.
1104 int (*softmac_hard_start_xmit
)(struct sk_buff
*skb
,
1105 struct net_device
*dev
);
1107 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
1108 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
1109 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
1110 * then also management frames are sent via this callback.
1111 * This function can't sleep.
1113 void (*softmac_data_hard_start_xmit
)(struct sk_buff
*skb
,
1114 struct net_device
*dev
,int rate
);
1116 /* stops the HW queue for DATA frames. Useful to avoid
1117 * waste time to TX data frame when we are reassociating
1118 * This function can sleep.
1120 void (*data_hard_stop
)(struct net_device
*dev
);
1122 /* OK this is complementar to data_poll_hard_stop */
1123 void (*data_hard_resume
)(struct net_device
*dev
);
1125 /* ask to the driver to retune the radio .
1126 * This function can sleep. the driver should ensure
1127 * the radio has been swithced before return.
1129 void (*set_chan
)(struct net_device
*dev
,short ch
);
1131 /* These are not used if the ieee stack takes care of
1132 * scanning (IEEE_SOFTMAC_SCAN feature set).
1133 * In this case only the set_chan is used.
1135 * The syncro version is similar to the start_scan but
1136 * does not return until all channels has been scanned.
1137 * this is called in user context and should sleep,
1138 * it is called in a work_queue when swithcing to ad-hoc mode
1139 * or in behalf of iwlist scan when the card is associated
1140 * and root user ask for a scan.
1141 * the function stop_scan should stop both the syncro and
1142 * background scanning and can sleep.
1143 * The function start_scan should initiate the background
1144 * scanning and can't sleep.
1146 void (*scan_syncro
)(struct net_device
*dev
);
1147 void (*start_scan
)(struct net_device
*dev
);
1148 void (*stop_scan
)(struct net_device
*dev
);
1150 /* indicate the driver that the link state is changed
1151 * for example it may indicate the card is associated now.
1152 * Driver might be interested in this to apply RX filter
1153 * rules or simply light the LINK led
1155 void (*link_change
)(struct net_device
*dev
);
1157 /* these two function indicates to the HW when to start
1158 * and stop to send beacons. This is used when the
1159 * IEEE_SOFTMAC_BEACONS is not set. For now the
1160 * stop_send_bacons is NOT guaranteed to be called only
1161 * after start_send_beacons.
1163 void (*start_send_beacons
) (struct net_device
*dev
);
1164 void (*stop_send_beacons
) (struct net_device
*dev
);
1166 /* power save mode related */
1167 void (*sta_wake_up
) (struct net_device
*dev
);
1168 void (*ps_request_tx_ack
) (struct net_device
*dev
);
1169 void (*enter_sleep_state
) (struct net_device
*dev
, u32 th
, u32 tl
);
1170 short (*ps_is_queue_empty
) (struct net_device
*dev
);
1173 //void (*wmm_param_update) (struct net_device *dev, u8 *ac_param);
1174 //void (*wmm_param_update) (struct ieee80211_device *ieee);
1176 /* This must be the last item so that it points to the data
1177 * allocated beyond this structure by alloc_ieee80211 */
1181 #define IEEE_A (1<<0)
1182 #define IEEE_B (1<<1)
1183 #define IEEE_G (1<<2)
1184 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
1186 /* Generate a 802.11 header */
1188 /* Uses the channel change callback directly
1189 * instead of [start/stop] scan callbacks
1191 #define IEEE_SOFTMAC_SCAN (1<<2)
1193 /* Perform authentication and association handshake */
1194 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
1196 /* Generate probe requests */
1197 #define IEEE_SOFTMAC_PROBERQ (1<<4)
1199 /* Generate respones to probe requests */
1200 #define IEEE_SOFTMAC_PROBERS (1<<5)
1202 /* The ieee802.11 stack will manages the netif queue
1203 * wake/stop for the driver, taking care of 802.11
1204 * fragmentation. See softmac.c for details. */
1205 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
1207 /* Uses only the softmac_data_hard_start_xmit
1208 * even for TX management frames.
1210 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
1212 /* Generate beacons. The stack will enqueue beacons
1215 #define IEEE_SOFTMAC_BEACONS (1<<6)
1219 static inline void *ieee80211_priv(struct net_device
*dev
)
1221 return ((struct ieee80211_device
*)netdev_priv(dev
))->priv
;
1224 extern inline int ieee80211_is_empty_essid(const char *essid
, int essid_len
)
1226 /* Single white space is for Linksys APs */
1227 if (essid_len
== 1 && essid
[0] == ' ')
1230 /* Otherwise, if the entire essid is 0, we assume it is hidden */
1233 if (essid
[essid_len
] != '\0')
1240 extern inline int ieee80211_is_valid_mode(struct ieee80211_device
*ieee
, int mode
)
1243 * It is possible for both access points and our device to support
1244 * combinations of modes, so as long as there is one valid combination
1245 * of ap/device supported modes, then return success
1248 if ((mode
& IEEE_A
) &&
1249 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
1250 (ieee
->freq_band
& IEEE80211_52GHZ_BAND
))
1253 if ((mode
& IEEE_G
) &&
1254 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
1255 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
1258 if ((mode
& IEEE_B
) &&
1259 (ieee
->modulation
& IEEE80211_CCK_MODULATION
) &&
1260 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
1266 extern inline int ieee80211_get_hdrlen(u16 fc
)
1270 switch (WLAN_FC_GET_TYPE(fc
)) {
1271 case IEEE80211_FTYPE_DATA
:
1272 if ((fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
))
1273 hdrlen
= 30; /* Addr4 */
1274 if(IEEE80211_QOS_HAS_SEQ(fc
))
1275 hdrlen
+= 2; /* QOS ctrl*/
1277 case IEEE80211_FTYPE_CTL
:
1278 switch (WLAN_FC_GET_STYPE(fc
)) {
1279 case IEEE80211_STYPE_CTS
:
1280 case IEEE80211_STYPE_ACK
:
1296 extern void free_ieee80211(struct net_device
*dev
);
1297 extern struct net_device
*alloc_ieee80211(int sizeof_priv
);
1299 extern int ieee80211_set_encryption(struct ieee80211_device
*ieee
);
1301 /* ieee80211_tx.c */
1303 extern int ieee80211_encrypt_fragment(
1304 struct ieee80211_device
*ieee
,
1305 struct sk_buff
*frag
,
1308 extern int ieee80211_rtl_xmit(struct sk_buff
*skb
,
1309 struct net_device
*dev
);
1310 extern void ieee80211_txb_free(struct ieee80211_txb
*);
1313 /* ieee80211_rx.c */
1314 extern int ieee80211_rtl_rx(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
1315 struct ieee80211_rx_stats
*rx_stats
);
1316 extern void ieee80211_rx_mgt(struct ieee80211_device
*ieee
,
1317 struct ieee80211_hdr_4addr
*header
,
1318 struct ieee80211_rx_stats
*stats
);
1320 /* ieee80211_wx.c */
1321 extern int ieee80211_wx_get_scan(struct ieee80211_device
*ieee
,
1322 struct iw_request_info
*info
,
1323 union iwreq_data
*wrqu
, char *key
);
1324 extern int ieee80211_wx_set_encode(struct ieee80211_device
*ieee
,
1325 struct iw_request_info
*info
,
1326 union iwreq_data
*wrqu
, char *key
);
1327 extern int ieee80211_wx_get_encode(struct ieee80211_device
*ieee
,
1328 struct iw_request_info
*info
,
1329 union iwreq_data
*wrqu
, char *key
);
1330 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device
*ieee
,
1331 struct iw_request_info
*info
,
1332 union iwreq_data
* wrqu
, char *extra
);
1333 int ieee80211_wx_set_auth(struct ieee80211_device
*ieee
,
1334 struct iw_request_info
*info
,
1335 struct iw_param
*data
, char *extra
);
1336 int ieee80211_wx_set_mlme(struct ieee80211_device
*ieee
,
1337 struct iw_request_info
*info
,
1338 union iwreq_data
*wrqu
, char *extra
);
1340 int ieee80211_wx_set_gen_ie(struct ieee80211_device
*ieee
, u8
*ie
, size_t len
);
1341 /* ieee80211_softmac.c */
1342 extern short ieee80211_is_54g(struct ieee80211_network net
);
1343 extern short ieee80211_is_shortslot(struct ieee80211_network net
);
1344 extern int ieee80211_rx_frame_softmac(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
1345 struct ieee80211_rx_stats
*rx_stats
, u16 type
,
1347 extern void ieee80211_softmac_new_net(struct ieee80211_device
*ieee
, struct ieee80211_network
*net
);
1349 extern void ieee80211_softmac_xmit(struct ieee80211_txb
*txb
, struct ieee80211_device
*ieee
);
1350 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device
*ieee
);
1351 extern void ieee80211_start_bss(struct ieee80211_device
*ieee
);
1352 extern void ieee80211_start_master_bss(struct ieee80211_device
*ieee
);
1353 extern void ieee80211_start_ibss(struct ieee80211_device
*ieee
);
1354 extern void ieee80211_softmac_init(struct ieee80211_device
*ieee
);
1355 extern void ieee80211_softmac_free(struct ieee80211_device
*ieee
);
1356 extern void ieee80211_associate_abort(struct ieee80211_device
*ieee
);
1357 extern void ieee80211_disassociate(struct ieee80211_device
*ieee
);
1358 extern void ieee80211_stop_scan(struct ieee80211_device
*ieee
);
1359 extern void ieee80211_start_scan_syncro(struct ieee80211_device
*ieee
);
1360 extern void ieee80211_check_all_nets(struct ieee80211_device
*ieee
);
1361 extern void ieee80211_start_protocol(struct ieee80211_device
*ieee
);
1362 extern void ieee80211_stop_protocol(struct ieee80211_device
*ieee
);
1363 extern void ieee80211_softmac_start_protocol(struct ieee80211_device
*ieee
);
1364 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device
*ieee
);
1365 extern void ieee80211_reset_queue(struct ieee80211_device
*ieee
);
1366 extern void ieee80211_rtl_wake_queue(struct ieee80211_device
*ieee
);
1367 extern void ieee80211_rtl_stop_queue(struct ieee80211_device
*ieee
);
1368 extern struct sk_buff
*ieee80211_get_beacon(struct ieee80211_device
*ieee
);
1369 extern void ieee80211_start_send_beacons(struct ieee80211_device
*ieee
);
1370 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
1371 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device
*ieee
, struct iw_point
*p
);
1372 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
1373 extern void ieee80211_ps_tx_ack(struct ieee80211_device
*ieee
, short success
);
1374 extern void SendDisassociation(struct ieee80211_device
*ieee
,u8
* asSta
,u8 asRsn
);
1375 extern void ieee80211_rtl_start_scan(struct ieee80211_device
*ieee
);
1377 //Add for RF power on power off by lizhaoming 080512
1378 extern void SendDisassociation(struct ieee80211_device
*ieee
,
1382 /* ieee80211_crypt_ccmp&tkip&wep.c */
1383 extern void ieee80211_tkip_null(void);
1384 extern void ieee80211_wep_null(void);
1385 extern void ieee80211_ccmp_null(void);
1386 /* ieee80211_softmac_wx.c */
1388 extern int ieee80211_wx_get_wap(struct ieee80211_device
*ieee
,
1389 struct iw_request_info
*info
,
1390 union iwreq_data
*wrqu
, char *ext
);
1392 extern int ieee80211_wx_set_wap(struct ieee80211_device
*ieee
,
1393 struct iw_request_info
*info
,
1394 union iwreq_data
*awrq
,
1397 extern int ieee80211_wx_get_essid(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,union iwreq_data
*wrqu
,char *b
);
1399 extern int ieee80211_wx_set_rate(struct ieee80211_device
*ieee
,
1400 struct iw_request_info
*info
,
1401 union iwreq_data
*wrqu
, char *extra
);
1403 extern int ieee80211_wx_get_rate(struct ieee80211_device
*ieee
,
1404 struct iw_request_info
*info
,
1405 union iwreq_data
*wrqu
, char *extra
);
1407 extern int ieee80211_wx_set_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1408 union iwreq_data
*wrqu
, char *b
);
1410 extern int ieee80211_wx_set_scan(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1411 union iwreq_data
*wrqu
, char *b
);
1413 extern int ieee80211_wx_set_essid(struct ieee80211_device
*ieee
,
1414 struct iw_request_info
*a
,
1415 union iwreq_data
*wrqu
, char *extra
);
1417 extern int ieee80211_wx_get_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1418 union iwreq_data
*wrqu
, char *b
);
1420 extern int ieee80211_wx_set_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1421 union iwreq_data
*wrqu
, char *b
);
1423 extern int ieee80211_wx_get_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1424 union iwreq_data
*wrqu
, char *b
);
1426 extern void ieee80211_wx_sync_scan_wq(struct work_struct
*work
);
1428 extern int ieee80211_wx_set_rawtx(struct ieee80211_device
*ieee
,
1429 struct iw_request_info
*info
,
1430 union iwreq_data
*wrqu
, char *extra
);
1432 extern int ieee80211_wx_get_name(struct ieee80211_device
*ieee
,
1433 struct iw_request_info
*info
,
1434 union iwreq_data
*wrqu
, char *extra
);
1436 extern int ieee80211_wx_set_power(struct ieee80211_device
*ieee
,
1437 struct iw_request_info
*info
,
1438 union iwreq_data
*wrqu
, char *extra
);
1440 extern int ieee80211_wx_get_power(struct ieee80211_device
*ieee
,
1441 struct iw_request_info
*info
,
1442 union iwreq_data
*wrqu
, char *extra
);
1444 extern void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device
*ieee
);
1446 extern void ieee80211_sta_ps_send_null_frame(struct ieee80211_device
*ieee
, short pwr
);
1448 extern const long ieee80211_wlan_frequencies
[];
1450 extern inline void ieee80211_increment_scans(struct ieee80211_device
*ieee
)
1455 extern inline int ieee80211_get_scans(struct ieee80211_device
*ieee
)
1460 static inline const char *escape_essid(const char *essid
, u8 essid_len
) {
1461 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
1462 const char *s
= essid
;
1465 if (ieee80211_is_empty_essid(essid
, essid_len
)) {
1466 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
1470 essid_len
= min(essid_len
, (u8
)IW_ESSID_MAX_SIZE
);
1471 while (essid_len
--) {
1483 #endif /* IEEE80211_H */