2 * Ethernet netdevice using ATM AAL5 as underlying carrier
3 * (RFC1483 obsoleted by RFC2684) for Linux
5 * Authors: Marcell GAL, 2000, XDSL Ltd, Hungary
6 * Eric Kinzie, 2006-2007, US Naval Research Laboratory
9 #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
11 #include <linux/module.h>
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/list.h>
15 #include <linux/netdevice.h>
16 #include <linux/skbuff.h>
17 #include <linux/etherdevice.h>
18 #include <linux/rtnetlink.h>
20 #include <linux/uaccess.h>
21 #include <linux/slab.h>
23 #include <linux/atm.h>
24 #include <linux/atmdev.h>
25 #include <linux/capability.h>
26 #include <linux/seq_file.h>
28 #include <linux/atmbr2684.h>
32 static void skb_debug(const struct sk_buff
*skb
)
36 print_hex_dump(KERN_DEBUG
, "br2684: skb: ", DUMP_OFFSET
,
37 16, 1, skb
->data
, min(NUM2PRINT
, skb
->len
), true);
41 #define BR2684_ETHERTYPE_LEN 2
42 #define BR2684_PAD_LEN 2
44 #define LLC 0xaa, 0xaa, 0x03
45 #define SNAP_BRIDGED 0x00, 0x80, 0xc2
46 #define SNAP_ROUTED 0x00, 0x00, 0x00
47 #define PID_ETHERNET 0x00, 0x07
48 #define ETHERTYPE_IPV4 0x08, 0x00
49 #define ETHERTYPE_IPV6 0x86, 0xdd
50 #define PAD_BRIDGED 0x00, 0x00
52 static const unsigned char ethertype_ipv4
[] = { ETHERTYPE_IPV4
};
53 static const unsigned char ethertype_ipv6
[] = { ETHERTYPE_IPV6
};
54 static const unsigned char llc_oui_pid_pad
[] =
55 { LLC
, SNAP_BRIDGED
, PID_ETHERNET
, PAD_BRIDGED
};
56 static const unsigned char llc_oui_ipv4
[] = { LLC
, SNAP_ROUTED
, ETHERTYPE_IPV4
};
57 static const unsigned char llc_oui_ipv6
[] = { LLC
, SNAP_ROUTED
, ETHERTYPE_IPV6
};
60 e_vc
= BR2684_ENCAPS_VC
,
61 e_llc
= BR2684_ENCAPS_LLC
,
65 struct atm_vcc
*atmvcc
;
66 struct net_device
*device
;
67 /* keep old push, pop functions for chaining */
68 void (*old_push
)(struct atm_vcc
*vcc
, struct sk_buff
*skb
);
69 void (*old_pop
)(struct atm_vcc
*vcc
, struct sk_buff
*skb
);
70 enum br2684_encaps encaps
;
71 struct list_head brvccs
;
72 #ifdef CONFIG_ATM_BR2684_IPFILTER
73 struct br2684_filter filter
;
74 #endif /* CONFIG_ATM_BR2684_IPFILTER */
75 unsigned copies_needed
, copies_failed
;
79 struct net_device
*net_dev
;
80 struct list_head br2684_devs
;
82 struct list_head brvccs
; /* one device <=> one vcc (before xmas) */
84 enum br2684_payload payload
;
88 * This lock should be held for writing any time the list of devices or
89 * their attached vcc's could be altered. It should be held for reading
90 * any time these are being queried. Note that we sometimes need to
91 * do read-locking under interrupt context, so write locking must block
92 * the current CPU's interrupts
94 static DEFINE_RWLOCK(devs_lock
);
96 static LIST_HEAD(br2684_devs
);
98 static inline struct br2684_dev
*BRPRIV(const struct net_device
*net_dev
)
100 return netdev_priv(net_dev
);
103 static inline struct net_device
*list_entry_brdev(const struct list_head
*le
)
105 return list_entry(le
, struct br2684_dev
, br2684_devs
)->net_dev
;
108 static inline struct br2684_vcc
*BR2684_VCC(const struct atm_vcc
*atmvcc
)
110 return (struct br2684_vcc
*)(atmvcc
->user_back
);
113 static inline struct br2684_vcc
*list_entry_brvcc(const struct list_head
*le
)
115 return list_entry(le
, struct br2684_vcc
, brvccs
);
118 /* Caller should hold read_lock(&devs_lock) */
119 static struct net_device
*br2684_find_dev(const struct br2684_if_spec
*s
)
121 struct list_head
*lh
;
122 struct net_device
*net_dev
;
124 case BR2684_FIND_BYNUM
:
125 list_for_each(lh
, &br2684_devs
) {
126 net_dev
= list_entry_brdev(lh
);
127 if (BRPRIV(net_dev
)->number
== s
->spec
.devnum
)
131 case BR2684_FIND_BYIFNAME
:
132 list_for_each(lh
, &br2684_devs
) {
133 net_dev
= list_entry_brdev(lh
);
134 if (!strncmp(net_dev
->name
, s
->spec
.ifname
, IFNAMSIZ
))
142 static int atm_dev_event(struct notifier_block
*this, unsigned long event
,
145 struct atm_dev
*atm_dev
= arg
;
146 struct list_head
*lh
;
147 struct net_device
*net_dev
;
148 struct br2684_vcc
*brvcc
;
149 struct atm_vcc
*atm_vcc
;
152 pr_debug("event=%ld dev=%p\n", event
, atm_dev
);
154 read_lock_irqsave(&devs_lock
, flags
);
155 list_for_each(lh
, &br2684_devs
) {
156 net_dev
= list_entry_brdev(lh
);
158 list_for_each_entry(brvcc
, &BRPRIV(net_dev
)->brvccs
, brvccs
) {
159 atm_vcc
= brvcc
->atmvcc
;
160 if (atm_vcc
&& brvcc
->atmvcc
->dev
== atm_dev
) {
162 if (atm_vcc
->dev
->signal
== ATM_PHY_SIG_LOST
)
163 netif_carrier_off(net_dev
);
165 netif_carrier_on(net_dev
);
170 read_unlock_irqrestore(&devs_lock
, flags
);
175 static struct notifier_block atm_dev_notifier
= {
176 .notifier_call
= atm_dev_event
,
179 /* chained vcc->pop function. Check if we should wake the netif_queue */
180 static void br2684_pop(struct atm_vcc
*vcc
, struct sk_buff
*skb
)
182 struct br2684_vcc
*brvcc
= BR2684_VCC(vcc
);
183 struct net_device
*net_dev
= skb
->dev
;
185 pr_debug("(vcc %p ; net_dev %p )\n", vcc
, net_dev
);
186 brvcc
->old_pop(vcc
, skb
);
191 if (atm_may_send(vcc
, 0))
192 netif_wake_queue(net_dev
);
196 * Send a packet out a particular vcc. Not to useful right now, but paves
197 * the way for multiple vcc's per itf. Returns true if we can send,
200 static int br2684_xmit_vcc(struct sk_buff
*skb
, struct net_device
*dev
,
201 struct br2684_vcc
*brvcc
)
203 struct br2684_dev
*brdev
= BRPRIV(dev
);
204 struct atm_vcc
*atmvcc
;
205 int minheadroom
= (brvcc
->encaps
== e_llc
) ? 10 : 2;
207 if (skb_headroom(skb
) < minheadroom
) {
208 struct sk_buff
*skb2
= skb_realloc_headroom(skb
, minheadroom
);
209 brvcc
->copies_needed
++;
212 brvcc
->copies_failed
++;
218 if (brvcc
->encaps
== e_llc
) {
219 if (brdev
->payload
== p_bridged
) {
220 skb_push(skb
, sizeof(llc_oui_pid_pad
));
221 skb_copy_to_linear_data(skb
, llc_oui_pid_pad
,
222 sizeof(llc_oui_pid_pad
));
223 } else if (brdev
->payload
== p_routed
) {
224 unsigned short prot
= ntohs(skb
->protocol
);
226 skb_push(skb
, sizeof(llc_oui_ipv4
));
229 skb_copy_to_linear_data(skb
, llc_oui_ipv4
,
230 sizeof(llc_oui_ipv4
));
233 skb_copy_to_linear_data(skb
, llc_oui_ipv6
,
234 sizeof(llc_oui_ipv6
));
242 if (brdev
->payload
== p_bridged
) {
244 memset(skb
->data
, 0, 2);
249 ATM_SKB(skb
)->vcc
= atmvcc
= brvcc
->atmvcc
;
250 pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb
, atmvcc
, atmvcc
->dev
);
251 atomic_add(skb
->truesize
, &sk_atm(atmvcc
)->sk_wmem_alloc
);
252 ATM_SKB(skb
)->atm_options
= atmvcc
->atm_options
;
253 dev
->stats
.tx_packets
++;
254 dev
->stats
.tx_bytes
+= skb
->len
;
255 atmvcc
->send(atmvcc
, skb
);
257 if (!atm_may_send(atmvcc
, 0)) {
258 netif_stop_queue(brvcc
->device
);
259 /*check for race with br2684_pop*/
260 if (atm_may_send(atmvcc
, 0))
261 netif_start_queue(brvcc
->device
);
267 static inline struct br2684_vcc
*pick_outgoing_vcc(const struct sk_buff
*skb
,
268 const struct br2684_dev
*brdev
)
270 return list_empty(&brdev
->brvccs
) ? NULL
: list_entry_brvcc(brdev
->brvccs
.next
); /* 1 vcc/dev right now */
273 static netdev_tx_t
br2684_start_xmit(struct sk_buff
*skb
,
274 struct net_device
*dev
)
276 struct br2684_dev
*brdev
= BRPRIV(dev
);
277 struct br2684_vcc
*brvcc
;
279 pr_debug("skb_dst(skb)=%p\n", skb_dst(skb
));
280 read_lock(&devs_lock
);
281 brvcc
= pick_outgoing_vcc(skb
, brdev
);
283 pr_debug("no vcc attached to dev %s\n", dev
->name
);
284 dev
->stats
.tx_errors
++;
285 dev
->stats
.tx_carrier_errors
++;
286 /* netif_stop_queue(dev); */
288 read_unlock(&devs_lock
);
291 if (!br2684_xmit_vcc(skb
, dev
, brvcc
)) {
293 * We should probably use netif_*_queue() here, but that
294 * involves added complication. We need to walk before
297 * Don't free here! this pointer might be no longer valid!
299 dev
->stats
.tx_errors
++;
300 dev
->stats
.tx_fifo_errors
++;
302 read_unlock(&devs_lock
);
307 * We remember when the MAC gets set, so we don't override it later with
308 * the ESI of the ATM card of the first VC
310 static int br2684_mac_addr(struct net_device
*dev
, void *p
)
312 int err
= eth_mac_addr(dev
, p
);
314 BRPRIV(dev
)->mac_was_set
= 1;
318 #ifdef CONFIG_ATM_BR2684_IPFILTER
319 /* this IOCTL is experimental. */
320 static int br2684_setfilt(struct atm_vcc
*atmvcc
, void __user
* arg
)
322 struct br2684_vcc
*brvcc
;
323 struct br2684_filter_set fs
;
325 if (copy_from_user(&fs
, arg
, sizeof fs
))
327 if (fs
.ifspec
.method
!= BR2684_FIND_BYNOTHING
) {
329 * This is really a per-vcc thing, but we can also search
332 struct br2684_dev
*brdev
;
333 read_lock(&devs_lock
);
334 brdev
= BRPRIV(br2684_find_dev(&fs
.ifspec
));
335 if (brdev
== NULL
|| list_empty(&brdev
->brvccs
) ||
336 brdev
->brvccs
.next
!= brdev
->brvccs
.prev
) /* >1 VCC */
339 brvcc
= list_entry_brvcc(brdev
->brvccs
.next
);
340 read_unlock(&devs_lock
);
344 brvcc
= BR2684_VCC(atmvcc
);
345 memcpy(&brvcc
->filter
, &fs
.filter
, sizeof(brvcc
->filter
));
349 /* Returns 1 if packet should be dropped */
351 packet_fails_filter(__be16 type
, struct br2684_vcc
*brvcc
, struct sk_buff
*skb
)
353 if (brvcc
->filter
.netmask
== 0)
354 return 0; /* no filter in place */
355 if (type
== htons(ETH_P_IP
) &&
356 (((struct iphdr
*)(skb
->data
))->daddr
& brvcc
->filter
.
357 netmask
) == brvcc
->filter
.prefix
)
359 if (type
== htons(ETH_P_ARP
))
362 * TODO: we should probably filter ARPs too.. don't want to have
363 * them returning values that don't make sense, or is that ok?
367 #endif /* CONFIG_ATM_BR2684_IPFILTER */
369 static void br2684_close_vcc(struct br2684_vcc
*brvcc
)
371 pr_debug("removing VCC %p from dev %p\n", brvcc
, brvcc
->device
);
372 write_lock_irq(&devs_lock
);
373 list_del(&brvcc
->brvccs
);
374 write_unlock_irq(&devs_lock
);
375 brvcc
->atmvcc
->user_back
= NULL
; /* what about vcc->recvq ??? */
376 brvcc
->old_push(brvcc
->atmvcc
, NULL
); /* pass on the bad news */
378 module_put(THIS_MODULE
);
381 /* when AAL5 PDU comes in: */
382 static void br2684_push(struct atm_vcc
*atmvcc
, struct sk_buff
*skb
)
384 struct br2684_vcc
*brvcc
= BR2684_VCC(atmvcc
);
385 struct net_device
*net_dev
= brvcc
->device
;
386 struct br2684_dev
*brdev
= BRPRIV(net_dev
);
390 if (unlikely(skb
== NULL
)) {
391 /* skb==NULL means VCC is being destroyed */
392 br2684_close_vcc(brvcc
);
393 if (list_empty(&brdev
->brvccs
)) {
394 write_lock_irq(&devs_lock
);
395 list_del(&brdev
->br2684_devs
);
396 write_unlock_irq(&devs_lock
);
397 unregister_netdev(net_dev
);
398 free_netdev(net_dev
);
404 atm_return(atmvcc
, skb
->truesize
);
405 pr_debug("skb from brdev %p\n", brdev
);
406 if (brvcc
->encaps
== e_llc
) {
408 if (skb
->len
> 7 && skb
->data
[7] == 0x01)
409 __skb_trim(skb
, skb
->len
- 4);
411 /* accept packets that have "ipv[46]" in the snap header */
412 if ((skb
->len
>= (sizeof(llc_oui_ipv4
))) &&
413 (memcmp(skb
->data
, llc_oui_ipv4
,
414 sizeof(llc_oui_ipv4
) - BR2684_ETHERTYPE_LEN
) == 0)) {
415 if (memcmp(skb
->data
+ 6, ethertype_ipv6
,
416 sizeof(ethertype_ipv6
)) == 0)
417 skb
->protocol
= htons(ETH_P_IPV6
);
418 else if (memcmp(skb
->data
+ 6, ethertype_ipv4
,
419 sizeof(ethertype_ipv4
)) == 0)
420 skb
->protocol
= htons(ETH_P_IP
);
423 skb_pull(skb
, sizeof(llc_oui_ipv4
));
424 skb_reset_network_header(skb
);
425 skb
->pkt_type
= PACKET_HOST
;
427 * Let us waste some time for checking the encapsulation.
428 * Note, that only 7 char is checked so frames with a valid FCS
429 * are also accepted (but FCS is not checked of course).
431 } else if ((skb
->len
>= sizeof(llc_oui_pid_pad
)) &&
432 (memcmp(skb
->data
, llc_oui_pid_pad
, 7) == 0)) {
433 skb_pull(skb
, sizeof(llc_oui_pid_pad
));
434 skb
->protocol
= eth_type_trans(skb
, net_dev
);
439 if (brdev
->payload
== p_routed
) {
442 skb_reset_network_header(skb
);
444 if (iph
->version
== 4)
445 skb
->protocol
= htons(ETH_P_IP
);
446 else if (iph
->version
== 6)
447 skb
->protocol
= htons(ETH_P_IPV6
);
450 skb
->pkt_type
= PACKET_HOST
;
451 } else { /* p_bridged */
452 /* first 2 chars should be 0 */
453 if (*((u16
*) (skb
->data
)) != 0)
455 skb_pull(skb
, BR2684_PAD_LEN
);
456 skb
->protocol
= eth_type_trans(skb
, net_dev
);
460 #ifdef CONFIG_ATM_BR2684_IPFILTER
461 if (unlikely(packet_fails_filter(skb
->protocol
, brvcc
, skb
)))
463 #endif /* CONFIG_ATM_BR2684_IPFILTER */
465 ATM_SKB(skb
)->vcc
= atmvcc
; /* needed ? */
466 pr_debug("received packet's protocol: %x\n", ntohs(skb
->protocol
));
468 /* sigh, interface is down? */
469 if (unlikely(!(net_dev
->flags
& IFF_UP
)))
471 net_dev
->stats
.rx_packets
++;
472 net_dev
->stats
.rx_bytes
+= skb
->len
;
473 memset(ATM_SKB(skb
), 0, sizeof(struct atm_skb_data
));
478 net_dev
->stats
.rx_dropped
++;
481 net_dev
->stats
.rx_errors
++;
487 * Assign a vcc to a dev
488 * Note: we do not have explicit unassign, but look at _push()
490 static int br2684_regvcc(struct atm_vcc
*atmvcc
, void __user
* arg
)
492 struct sk_buff_head queue
;
494 struct br2684_vcc
*brvcc
;
495 struct sk_buff
*skb
, *tmp
;
496 struct sk_buff_head
*rq
;
497 struct br2684_dev
*brdev
;
498 struct net_device
*net_dev
;
499 struct atm_backend_br2684 be
;
502 if (copy_from_user(&be
, arg
, sizeof be
))
504 brvcc
= kzalloc(sizeof(struct br2684_vcc
), GFP_KERNEL
);
507 write_lock_irq(&devs_lock
);
508 net_dev
= br2684_find_dev(&be
.ifspec
);
509 if (net_dev
== NULL
) {
510 pr_err("tried to attach to non-existent device\n");
514 brdev
= BRPRIV(net_dev
);
515 if (atmvcc
->push
== NULL
) {
519 if (!list_empty(&brdev
->brvccs
)) {
520 /* Only 1 VCC/dev right now */
524 if (be
.fcs_in
!= BR2684_FCSIN_NO
||
525 be
.fcs_out
!= BR2684_FCSOUT_NO
||
526 be
.fcs_auto
|| be
.has_vpiid
|| be
.send_padding
||
527 (be
.encaps
!= BR2684_ENCAPS_VC
&&
528 be
.encaps
!= BR2684_ENCAPS_LLC
) ||
533 pr_debug("vcc=%p, encaps=%d, brvcc=%p\n", atmvcc
, be
.encaps
, brvcc
);
534 if (list_empty(&brdev
->brvccs
) && !brdev
->mac_was_set
) {
535 unsigned char *esi
= atmvcc
->dev
->esi
;
536 if (esi
[0] | esi
[1] | esi
[2] | esi
[3] | esi
[4] | esi
[5])
537 memcpy(net_dev
->dev_addr
, esi
, net_dev
->addr_len
);
539 net_dev
->dev_addr
[2] = 1;
541 list_add(&brvcc
->brvccs
, &brdev
->brvccs
);
542 write_unlock_irq(&devs_lock
);
543 brvcc
->device
= net_dev
;
544 brvcc
->atmvcc
= atmvcc
;
545 atmvcc
->user_back
= brvcc
;
546 brvcc
->encaps
= (enum br2684_encaps
)be
.encaps
;
547 brvcc
->old_push
= atmvcc
->push
;
548 brvcc
->old_pop
= atmvcc
->pop
;
550 atmvcc
->push
= br2684_push
;
551 atmvcc
->pop
= br2684_pop
;
553 __skb_queue_head_init(&queue
);
554 rq
= &sk_atm(atmvcc
)->sk_receive_queue
;
556 spin_lock_irqsave(&rq
->lock
, flags
);
557 skb_queue_splice_init(rq
, &queue
);
558 spin_unlock_irqrestore(&rq
->lock
, flags
);
560 skb_queue_walk_safe(&queue
, skb
, tmp
) {
561 struct net_device
*dev
= skb
->dev
;
563 dev
->stats
.rx_bytes
-= skb
->len
;
564 dev
->stats
.rx_packets
--;
566 br2684_push(atmvcc
, skb
);
569 /* initialize netdev carrier state */
570 if (atmvcc
->dev
->signal
== ATM_PHY_SIG_LOST
)
571 netif_carrier_off(net_dev
);
573 netif_carrier_on(net_dev
);
575 __module_get(THIS_MODULE
);
579 write_unlock_irq(&devs_lock
);
584 static const struct net_device_ops br2684_netdev_ops
= {
585 .ndo_start_xmit
= br2684_start_xmit
,
586 .ndo_set_mac_address
= br2684_mac_addr
,
587 .ndo_change_mtu
= eth_change_mtu
,
588 .ndo_validate_addr
= eth_validate_addr
,
591 static const struct net_device_ops br2684_netdev_ops_routed
= {
592 .ndo_start_xmit
= br2684_start_xmit
,
593 .ndo_set_mac_address
= br2684_mac_addr
,
594 .ndo_change_mtu
= eth_change_mtu
597 static void br2684_setup(struct net_device
*netdev
)
599 struct br2684_dev
*brdev
= BRPRIV(netdev
);
602 brdev
->net_dev
= netdev
;
604 netdev
->netdev_ops
= &br2684_netdev_ops
;
606 INIT_LIST_HEAD(&brdev
->brvccs
);
609 static void br2684_setup_routed(struct net_device
*netdev
)
611 struct br2684_dev
*brdev
= BRPRIV(netdev
);
613 brdev
->net_dev
= netdev
;
614 netdev
->hard_header_len
= 0;
615 netdev
->netdev_ops
= &br2684_netdev_ops_routed
;
616 netdev
->addr_len
= 0;
618 netdev
->type
= ARPHRD_PPP
;
619 netdev
->flags
= IFF_POINTOPOINT
| IFF_NOARP
| IFF_MULTICAST
;
620 netdev
->tx_queue_len
= 100;
621 INIT_LIST_HEAD(&brdev
->brvccs
);
624 static int br2684_create(void __user
*arg
)
627 struct net_device
*netdev
;
628 struct br2684_dev
*brdev
;
629 struct atm_newif_br2684 ni
;
630 enum br2684_payload payload
;
634 if (copy_from_user(&ni
, arg
, sizeof ni
))
637 if (ni
.media
& BR2684_FLAG_ROUTED
)
641 ni
.media
&= 0xffff; /* strip flags */
643 if (ni
.media
!= BR2684_MEDIA_ETHERNET
|| ni
.mtu
!= 1500)
646 netdev
= alloc_netdev(sizeof(struct br2684_dev
),
647 ni
.ifname
[0] ? ni
.ifname
: "nas%d",
648 (payload
== p_routed
) ?
649 br2684_setup_routed
: br2684_setup
);
653 brdev
= BRPRIV(netdev
);
655 pr_debug("registered netdev %s\n", netdev
->name
);
656 /* open, stop, do_ioctl ? */
657 err
= register_netdev(netdev
);
659 pr_err("register_netdev failed\n");
664 write_lock_irq(&devs_lock
);
666 brdev
->payload
= payload
;
668 if (list_empty(&br2684_devs
)) {
669 /* 1st br2684 device */
672 brdev
->number
= BRPRIV(list_entry_brdev(br2684_devs
.prev
))->number
+ 1;
674 list_add_tail(&brdev
->br2684_devs
, &br2684_devs
);
675 write_unlock_irq(&devs_lock
);
680 * This handles ioctls actually performed on our vcc - we must return
681 * -ENOIOCTLCMD for any unrecognized ioctl
683 static int br2684_ioctl(struct socket
*sock
, unsigned int cmd
,
686 struct atm_vcc
*atmvcc
= ATM_SD(sock
);
687 void __user
*argp
= (void __user
*)arg
;
693 case ATM_NEWBACKENDIF
:
694 err
= get_user(b
, (atm_backend_t __user
*) argp
);
697 if (b
!= ATM_BACKEND_BR2684
)
699 if (!capable(CAP_NET_ADMIN
))
701 if (cmd
== ATM_SETBACKEND
)
702 return br2684_regvcc(atmvcc
, argp
);
704 return br2684_create(argp
);
705 #ifdef CONFIG_ATM_BR2684_IPFILTER
707 if (atmvcc
->push
!= br2684_push
)
709 if (!capable(CAP_NET_ADMIN
))
711 err
= br2684_setfilt(atmvcc
, argp
);
714 #endif /* CONFIG_ATM_BR2684_IPFILTER */
719 static struct atm_ioctl br2684_ioctl_ops
= {
720 .owner
= THIS_MODULE
,
721 .ioctl
= br2684_ioctl
,
724 #ifdef CONFIG_PROC_FS
725 static void *br2684_seq_start(struct seq_file
*seq
, loff_t
* pos
)
726 __acquires(devs_lock
)
728 read_lock(&devs_lock
);
729 return seq_list_start(&br2684_devs
, *pos
);
732 static void *br2684_seq_next(struct seq_file
*seq
, void *v
, loff_t
* pos
)
734 return seq_list_next(v
, &br2684_devs
, pos
);
737 static void br2684_seq_stop(struct seq_file
*seq
, void *v
)
738 __releases(devs_lock
)
740 read_unlock(&devs_lock
);
743 static int br2684_seq_show(struct seq_file
*seq
, void *v
)
745 const struct br2684_dev
*brdev
= list_entry(v
, struct br2684_dev
,
747 const struct net_device
*net_dev
= brdev
->net_dev
;
748 const struct br2684_vcc
*brvcc
;
750 seq_printf(seq
, "dev %.16s: num=%d, mac=%pM (%s)\n",
754 brdev
->mac_was_set
? "set" : "auto");
756 list_for_each_entry(brvcc
, &brdev
->brvccs
, brvccs
) {
757 seq_printf(seq
, " vcc %d.%d.%d: encaps=%s payload=%s"
758 ", failed copies %u/%u"
759 "\n", brvcc
->atmvcc
->dev
->number
,
760 brvcc
->atmvcc
->vpi
, brvcc
->atmvcc
->vci
,
761 (brvcc
->encaps
== e_llc
) ? "LLC" : "VC",
762 (brdev
->payload
== p_bridged
) ? "bridged" : "routed",
763 brvcc
->copies_failed
, brvcc
->copies_needed
);
764 #ifdef CONFIG_ATM_BR2684_IPFILTER
765 #define b1(var, byte) ((u8 *) &brvcc->filter.var)[byte]
766 #define bs(var) b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
767 if (brvcc
->filter
.netmask
!= 0)
768 seq_printf(seq
, " filter=%d.%d.%d.%d/"
769 "%d.%d.%d.%d\n", bs(prefix
), bs(netmask
));
772 #endif /* CONFIG_ATM_BR2684_IPFILTER */
777 static const struct seq_operations br2684_seq_ops
= {
778 .start
= br2684_seq_start
,
779 .next
= br2684_seq_next
,
780 .stop
= br2684_seq_stop
,
781 .show
= br2684_seq_show
,
784 static int br2684_proc_open(struct inode
*inode
, struct file
*file
)
786 return seq_open(file
, &br2684_seq_ops
);
789 static const struct file_operations br2684_proc_ops
= {
790 .owner
= THIS_MODULE
,
791 .open
= br2684_proc_open
,
794 .release
= seq_release
,
797 extern struct proc_dir_entry
*atm_proc_root
; /* from proc.c */
798 #endif /* CONFIG_PROC_FS */
800 static int __init
br2684_init(void)
802 #ifdef CONFIG_PROC_FS
803 struct proc_dir_entry
*p
;
804 p
= proc_create("br2684", 0, atm_proc_root
, &br2684_proc_ops
);
808 register_atm_ioctl(&br2684_ioctl_ops
);
809 register_atmdevice_notifier(&atm_dev_notifier
);
813 static void __exit
br2684_exit(void)
815 struct net_device
*net_dev
;
816 struct br2684_dev
*brdev
;
817 struct br2684_vcc
*brvcc
;
818 deregister_atm_ioctl(&br2684_ioctl_ops
);
820 #ifdef CONFIG_PROC_FS
821 remove_proc_entry("br2684", atm_proc_root
);
825 unregister_atmdevice_notifier(&atm_dev_notifier
);
827 while (!list_empty(&br2684_devs
)) {
828 net_dev
= list_entry_brdev(br2684_devs
.next
);
829 brdev
= BRPRIV(net_dev
);
830 while (!list_empty(&brdev
->brvccs
)) {
831 brvcc
= list_entry_brvcc(brdev
->brvccs
.next
);
832 br2684_close_vcc(brvcc
);
835 list_del(&brdev
->br2684_devs
);
836 unregister_netdev(net_dev
);
837 free_netdev(net_dev
);
841 module_init(br2684_init
);
842 module_exit(br2684_exit
);
844 MODULE_AUTHOR("Marcell GAL");
845 MODULE_DESCRIPTION("RFC2684 bridged protocols over ATM/AAL5");
846 MODULE_LICENSE("GPL");