2 # Makefile for the linux kernel.
6 obj-y
:= id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
7 common.o gpio.o dma.o wd_timer.o
9 omap-2-3-common
= irq.o sdrc.o
10 hwmod-common
= omap_hwmod.o \
11 omap_hwmod_common_data.o
12 clock-common
= clock.o clock_common_data.o \
13 clkt_dpll.o clkt_clksel.o
15 obj-
$(CONFIG_ARCH_OMAP2
) += $(omap-2-3-common
) $(hwmod-common
)
16 obj-
$(CONFIG_ARCH_OMAP3
) += $(omap-2-3-common
) $(hwmod-common
)
17 obj-
$(CONFIG_ARCH_OMAP4
) += prm44xx.o
$(hwmod-common
)
19 obj-
$(CONFIG_OMAP_MCBSP
) += mcbsp.o
21 obj-
$(CONFIG_TWL4030_CORE
) += omap_twl.o
23 # SMP support ONLY available for OMAP4
24 obj-
$(CONFIG_SMP
) += omap-smp.o omap-headsmp.o
25 obj-
$(CONFIG_LOCAL_TIMERS
) += timer-mpu.o
26 obj-
$(CONFIG_HOTPLUG_CPU
) += omap-hotplug.o
27 obj-
$(CONFIG_ARCH_OMAP4
) += omap44xx-smc.o omap4-common.o
29 plus_sec
:= $(call as-instr
,.arch_extension sec
,+sec
)
30 AFLAGS_omap-headsmp.o
:=-Wa
,-march
=armv7-a
$(plus_sec
)
31 AFLAGS_omap44xx-smc.o
:=-Wa
,-march
=armv7-a
$(plus_sec
)
33 # Functions loaded to SRAM
34 obj-
$(CONFIG_SOC_OMAP2420
) += sram242x.o
35 obj-
$(CONFIG_SOC_OMAP2430
) += sram243x.o
36 obj-
$(CONFIG_ARCH_OMAP3
) += sram34xx.o
38 AFLAGS_sram242x.o
:=-Wa
,-march
=armv6
39 AFLAGS_sram243x.o
:=-Wa
,-march
=armv6
40 AFLAGS_sram34xx.o
:=-Wa
,-march
=armv7-a
43 obj-
$(CONFIG_SOC_OMAP2420
) += mux2420.o
44 obj-
$(CONFIG_SOC_OMAP2430
) += mux2430.o
45 obj-
$(CONFIG_ARCH_OMAP3
) += mux34xx.o
46 obj-
$(CONFIG_ARCH_OMAP4
) += mux44xx.o
49 obj-
$(CONFIG_ARCH_OMAP2
) += sdrc2xxx.o
50 # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
52 # OPP table initialization
53 ifeq ($(CONFIG_PM_OPP
),y
)
55 obj-
$(CONFIG_ARCH_OMAP3
) += opp3xxx_data.o
56 obj-
$(CONFIG_ARCH_OMAP4
) += opp4xxx_data.o
61 obj-
$(CONFIG_ARCH_OMAP2
) += pm24xx.o
62 obj-
$(CONFIG_ARCH_OMAP2
) += sleep24xx.o
63 obj-
$(CONFIG_ARCH_OMAP3
) += pm34xx.o sleep34xx.o \
65 obj-
$(CONFIG_ARCH_OMAP4
) += pm44xx.o
66 obj-
$(CONFIG_PM_DEBUG
) += pm-debug.o
67 obj-
$(CONFIG_OMAP_SMARTREFLEX
) += sr_device.o smartreflex.o
68 obj-
$(CONFIG_OMAP_SMARTREFLEX_CLASS3
) += smartreflex-class3.o
70 AFLAGS_sleep24xx.o
:=-Wa
,-march
=armv6
71 AFLAGS_sleep34xx.o
:=-Wa
,-march
=armv7-a
73 ifeq ($(CONFIG_PM_VERBOSE
),y
)
74 CFLAGS_pm_bus.o
+= -DDEBUG
80 obj-
$(CONFIG_ARCH_OMAP2
) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
81 obj-
$(CONFIG_ARCH_OMAP3
) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
82 vc3xxx_data.o vp3xxx_data.o
83 # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
84 # will be removed once the OMAP4 part of the codebase is converted to
85 # use OMAP4-specific PRCM functions.
86 obj-
$(CONFIG_ARCH_OMAP4
) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
87 cm44xx.o prcm_mpu44xx.o \
88 prminst44xx.o vc44xx_data.o \
91 # OMAP voltage domains
93 voltagedomain-common
:= voltage.o
94 obj-
$(CONFIG_ARCH_OMAP2
) += $(voltagedomain-common
)
95 obj-
$(CONFIG_ARCH_OMAP3
) += $(voltagedomain-common
) \
96 voltagedomains3xxx_data.o
97 obj-
$(CONFIG_ARCH_OMAP4
) += $(voltagedomain-common
) \
98 voltagedomains44xx_data.o
101 # OMAP powerdomain framework
102 powerdomain-common
+= powerdomain.o powerdomain-common.o
103 obj-
$(CONFIG_ARCH_OMAP2
) += $(powerdomain-common
) \
104 powerdomain2xxx_3xxx.o \
105 powerdomains2xxx_data.o \
106 powerdomains2xxx_3xxx_data.o
107 obj-
$(CONFIG_ARCH_OMAP3
) += $(powerdomain-common
) \
108 powerdomain2xxx_3xxx.o \
109 powerdomains3xxx_data.o \
110 powerdomains2xxx_3xxx_data.o
111 obj-
$(CONFIG_ARCH_OMAP4
) += $(powerdomain-common
) \
113 powerdomains44xx_data.o
115 # PRCM clockdomain control
116 obj-
$(CONFIG_ARCH_OMAP2
) += clockdomain.o \
117 clockdomain2xxx_3xxx.o \
118 clockdomains2xxx_3xxx_data.o
119 obj-
$(CONFIG_ARCH_OMAP3
) += clockdomain.o \
120 clockdomain2xxx_3xxx.o \
121 clockdomains2xxx_3xxx_data.o
122 obj-
$(CONFIG_ARCH_OMAP4
) += clockdomain.o \
124 clockdomains44xx_data.o
127 obj-
$(CONFIG_ARCH_OMAP2
) += $(clock-common
) clock2xxx.o \
129 clkt2xxx_dpllcore.o \
130 clkt2xxx_virt_prcm_set.o \
131 clkt2xxx_apll.o clkt2xxx_osc.o \
132 clkt2xxx_dpll.o clkt_iclk.o
133 obj-
$(CONFIG_SOC_OMAP2420
) += clock2420_data.o
134 obj-
$(CONFIG_SOC_OMAP2430
) += clock2430.o clock2430_data.o
135 obj-
$(CONFIG_ARCH_OMAP3
) += $(clock-common
) clock3xxx.o \
136 clock34xx.o clkt34xx_dpll3m2.o \
137 clock3517.o clock36xx.o \
138 dpll3xxx.o clock3xxx_data.o \
140 obj-
$(CONFIG_ARCH_OMAP4
) += $(clock-common
) clock44xx_data.o \
141 dpll3xxx.o dpll44xx.o
143 # OMAP2 clock rate set data (old "OPP" data)
144 obj-
$(CONFIG_SOC_OMAP2420
) += opp2420_data.o
145 obj-
$(CONFIG_SOC_OMAP2430
) += opp2430_data.o
148 obj-
$(CONFIG_SOC_OMAP2420
) += omap_hwmod_2420_data.o
149 obj-
$(CONFIG_SOC_OMAP2430
) += omap_hwmod_2430_data.o
150 obj-
$(CONFIG_ARCH_OMAP3
) += omap_hwmod_3xxx_data.o
151 obj-
$(CONFIG_ARCH_OMAP4
) += omap_hwmod_44xx_data.o
154 obj-
$(CONFIG_OMAP3_EMU
) += emu.o
157 obj-
$(CONFIG_ARCH_OMAP3
) += omap_l3_smx.o
158 obj-
$(CONFIG_ARCH_OMAP4
) += omap_l3_noc.o
160 obj-
$(CONFIG_OMAP_MBOX_FWK
) += mailbox_mach.o
161 mailbox_mach-objs
:= mailbox.o
163 obj-
$(CONFIG_OMAP_IOMMU
) += iommu2.o
165 iommu-
$(CONFIG_OMAP_IOMMU
) := omap-iommu.o
166 obj-y
+= $(iommu-m
) $(iommu-y
)
168 i2c-omap-
$(CONFIG_I2C_OMAP
) := i2c.o
169 obj-y
+= $(i2c-omap-m
) $(i2c-omap-y
)
171 ifneq ($(CONFIG_TIDSPBRIDGE
),)
175 # Specific board support
176 obj-
$(CONFIG_MACH_OMAP_GENERIC
) += board-generic.o
177 obj-
$(CONFIG_MACH_OMAP_H4
) += board-h4.o
178 obj-
$(CONFIG_MACH_OMAP_2430SDP
) += board-2430sdp.o \
180 obj-
$(CONFIG_MACH_OMAP_APOLLON
) += board-apollon.o
181 obj-
$(CONFIG_MACH_OMAP3_BEAGLE
) += board-omap3beagle.o \
183 obj-
$(CONFIG_MACH_DEVKIT8000
) += board-devkit8000.o \
185 obj-
$(CONFIG_MACH_OMAP_LDP
) += board-ldp.o \
188 obj-
$(CONFIG_MACH_OMAP3530_LV_SOM
) += board-omap3logic.o \
190 obj-
$(CONFIG_MACH_OMAP3_TORPEDO
) += board-omap3logic.o \
192 obj-
$(CONFIG_MACH_OVERO
) += board-overo.o \
194 obj-
$(CONFIG_MACH_OMAP3EVM
) += board-omap3evm.o \
196 obj-
$(CONFIG_MACH_OMAP3_PANDORA
) += board-omap3pandora.o \
198 obj-
$(CONFIG_MACH_OMAP_3430SDP
) += board-3430sdp.o \
201 obj-
$(CONFIG_MACH_NOKIA_N8X0
) += board-n8x0.o
202 obj-
$(CONFIG_MACH_NOKIA_RM680
) += board-rm680.o \
205 obj-
$(CONFIG_MACH_NOKIA_RX51
) += board-rx51.o \
207 board-rx51-peripherals.o \
210 obj-
$(CONFIG_MACH_OMAP_ZOOM2
) += board-zoom.o \
211 board-zoom-peripherals.o \
212 board-zoom-display.o \
215 board-zoom-debugboard.o
216 obj-
$(CONFIG_MACH_OMAP_ZOOM3
) += board-zoom.o \
217 board-zoom-peripherals.o \
218 board-zoom-display.o \
221 board-zoom-debugboard.o
222 obj-
$(CONFIG_MACH_OMAP_3630SDP
) += board-3630sdp.o \
223 board-zoom-peripherals.o \
224 board-zoom-display.o \
227 obj-
$(CONFIG_MACH_CM_T35
) += board-cm-t35.o \
229 obj-
$(CONFIG_MACH_CM_T3517
) += board-cm-t3517.o
230 obj-
$(CONFIG_MACH_IGEP0020
) += board-igep0020.o \
232 obj-
$(CONFIG_MACH_IGEP0030
) += board-igep0030.o \
234 obj-
$(CONFIG_MACH_OMAP3_TOUCHBOOK
) += board-omap3touchbook.o \
236 obj-
$(CONFIG_MACH_OMAP_4430SDP
) += board-4430sdp.o \
239 obj-
$(CONFIG_MACH_OMAP4_PANDA
) += board-omap4panda.o \
243 obj-
$(CONFIG_MACH_OMAP3517EVM
) += board-am3517evm.o \
244 omap_phy_internal.o \
246 obj-
$(CONFIG_MACH_CRANEBOARD
) += board-am3517crane.o
248 obj-
$(CONFIG_MACH_SBC3530
) += board-omap3stalker.o \
250 obj-
$(CONFIG_MACH_TI8168EVM
) += board-ti8168evm.o
251 # Platform specific device init code
252 usbfs-
$(CONFIG_ARCH_OMAP_OTG
) := usb-fs.o
253 obj-y
+= $(usbfs-m
) $(usbfs-y
)
255 obj-
$(CONFIG_MACH_OMAP2_TUSB6010
) += usb-tusb6010.o
258 onenand-
$(CONFIG_MTD_ONENAND_OMAP2
) := gpmc-onenand.o
259 obj-y
+= $(onenand-m
) $(onenand-y
)
261 nand-
$(CONFIG_MTD_NAND_OMAP2
) := gpmc-nand.o
262 obj-y
+= $(nand-m
) $(nand-y
)
264 smc91x-
$(CONFIG_SMC91X
) := gpmc-smc91x.o
265 obj-y
+= $(smc91x-m
) $(smc91x-y
)
267 smsc911x-
$(CONFIG_SMSC911X
) := gpmc-smsc911x.o
268 obj-y
+= $(smsc911x-m
) $(smsc911x-y
)
269 obj-
$(CONFIG_ARCH_OMAP4
) += hwspinlock.o
271 disp-
$(CONFIG_OMAP2_DSS
) := display.o
272 obj-y
+= $(disp-m
) $(disp-y
)