2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
56 #include <linux/kernel.h>
57 #include <linux/init.h>
58 #include <linux/module.h>
59 #include <linux/firmware.h>
60 #include <linux/efi.h>
61 #include <asm/string.h>
62 #include <scsi/scsi_host.h>
65 #include "probe_roms.h"
70 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
73 MODULE_VERSION(DRV_VERSION
);
75 static struct scsi_transport_template
*isci_transport_template
;
77 static DEFINE_PCI_DEVICE_TABLE(isci_id_table
) = {
78 { PCI_VDEVICE(INTEL
, 0x1D61),},
79 { PCI_VDEVICE(INTEL
, 0x1D63),},
80 { PCI_VDEVICE(INTEL
, 0x1D65),},
81 { PCI_VDEVICE(INTEL
, 0x1D67),},
82 { PCI_VDEVICE(INTEL
, 0x1D69),},
83 { PCI_VDEVICE(INTEL
, 0x1D6B),},
84 { PCI_VDEVICE(INTEL
, 0x1D60),},
85 { PCI_VDEVICE(INTEL
, 0x1D62),},
86 { PCI_VDEVICE(INTEL
, 0x1D64),},
87 { PCI_VDEVICE(INTEL
, 0x1D66),},
88 { PCI_VDEVICE(INTEL
, 0x1D68),},
89 { PCI_VDEVICE(INTEL
, 0x1D6A),},
93 MODULE_DEVICE_TABLE(pci
, isci_id_table
);
95 /* linux isci specific settings */
97 unsigned char no_outbound_task_to
= 20;
98 module_param(no_outbound_task_to
, byte
, 0);
99 MODULE_PARM_DESC(no_outbound_task_to
, "No Outbound Task Timeout (1us incr)");
101 u16 ssp_max_occ_to
= 20;
102 module_param(ssp_max_occ_to
, ushort
, 0);
103 MODULE_PARM_DESC(ssp_max_occ_to
, "SSP Max occupancy timeout (100us incr)");
105 u16 stp_max_occ_to
= 5;
106 module_param(stp_max_occ_to
, ushort
, 0);
107 MODULE_PARM_DESC(stp_max_occ_to
, "STP Max occupancy timeout (100us incr)");
109 u16 ssp_inactive_to
= 5;
110 module_param(ssp_inactive_to
, ushort
, 0);
111 MODULE_PARM_DESC(ssp_inactive_to
, "SSP inactivity timeout (100us incr)");
113 u16 stp_inactive_to
= 5;
114 module_param(stp_inactive_to
, ushort
, 0);
115 MODULE_PARM_DESC(stp_inactive_to
, "STP inactivity timeout (100us incr)");
117 unsigned char phy_gen
= 3;
118 module_param(phy_gen
, byte
, 0);
119 MODULE_PARM_DESC(phy_gen
, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
121 unsigned char max_concurr_spinup
;
122 module_param(max_concurr_spinup
, byte
, 0);
123 MODULE_PARM_DESC(max_concurr_spinup
, "Max concurrent device spinup");
125 static ssize_t
isci_show_id(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
127 struct Scsi_Host
*shost
= container_of(dev
, typeof(*shost
), shost_dev
);
128 struct sas_ha_struct
*sas_ha
= SHOST_TO_SAS_HA(shost
);
129 struct isci_host
*ihost
= container_of(sas_ha
, typeof(*ihost
), sas_ha
);
131 return snprintf(buf
, PAGE_SIZE
, "%d\n", ihost
->id
);
134 static DEVICE_ATTR(isci_id
, S_IRUGO
, isci_show_id
, NULL
);
136 struct device_attribute
*isci_host_attrs
[] = {
141 static struct scsi_host_template isci_sht
= {
143 .module
= THIS_MODULE
,
145 .proc_name
= DRV_NAME
,
146 .queuecommand
= sas_queuecommand
,
147 .target_alloc
= sas_target_alloc
,
148 .slave_configure
= sas_slave_configure
,
149 .slave_destroy
= sas_slave_destroy
,
150 .scan_finished
= isci_host_scan_finished
,
151 .scan_start
= isci_host_scan_start
,
152 .change_queue_depth
= sas_change_queue_depth
,
153 .change_queue_type
= sas_change_queue_type
,
154 .bios_param
= sas_bios_param
,
155 .can_queue
= ISCI_CAN_QUEUE_VAL
,
158 .sg_tablesize
= SG_ALL
,
159 .max_sectors
= SCSI_DEFAULT_MAX_SECTORS
,
160 .use_clustering
= ENABLE_CLUSTERING
,
161 .eh_device_reset_handler
= sas_eh_device_reset_handler
,
162 .eh_bus_reset_handler
= isci_bus_reset_handler
,
163 .slave_alloc
= sas_slave_alloc
,
164 .target_destroy
= sas_target_destroy
,
166 .shost_attrs
= isci_host_attrs
,
169 static struct sas_domain_function_template isci_transport_ops
= {
171 /* The class calls these to notify the LLDD of an event. */
172 .lldd_port_formed
= isci_port_formed
,
173 .lldd_port_deformed
= isci_port_deformed
,
175 /* The class calls these when a device is found or gone. */
176 .lldd_dev_found
= isci_remote_device_found
,
177 .lldd_dev_gone
= isci_remote_device_gone
,
179 .lldd_execute_task
= isci_task_execute_task
,
180 /* Task Management Functions. Must be called from process context. */
181 .lldd_abort_task
= isci_task_abort_task
,
182 .lldd_abort_task_set
= isci_task_abort_task_set
,
183 .lldd_clear_aca
= isci_task_clear_aca
,
184 .lldd_clear_task_set
= isci_task_clear_task_set
,
185 .lldd_I_T_nexus_reset
= isci_task_I_T_nexus_reset
,
186 .lldd_lu_reset
= isci_task_lu_reset
,
187 .lldd_query_task
= isci_task_query_task
,
189 /* Port and Adapter management */
190 .lldd_clear_nexus_port
= isci_task_clear_nexus_port
,
191 .lldd_clear_nexus_ha
= isci_task_clear_nexus_ha
,
194 .lldd_control_phy
= isci_phy_control
,
197 .lldd_write_gpio
= isci_gpio_write
,
201 /******************************************************************************
202 * P R O T E C T E D M E T H O D S
203 ******************************************************************************/
208 * isci_register_sas_ha() - This method initializes various lldd
209 * specific members of the sas_ha struct and calls the libsas
210 * sas_register_ha() function.
211 * @isci_host: This parameter specifies the lldd specific wrapper for the
212 * libsas sas_ha struct.
214 * This method returns an error code indicating sucess or failure. The user
215 * should check for possible memory allocation error return otherwise, a zero
218 static int isci_register_sas_ha(struct isci_host
*isci_host
)
221 struct sas_ha_struct
*sas_ha
= &(isci_host
->sas_ha
);
222 struct asd_sas_phy
**sas_phys
;
223 struct asd_sas_port
**sas_ports
;
225 sas_phys
= devm_kzalloc(&isci_host
->pdev
->dev
,
226 SCI_MAX_PHYS
* sizeof(void *),
231 sas_ports
= devm_kzalloc(&isci_host
->pdev
->dev
,
232 SCI_MAX_PORTS
* sizeof(void *),
237 /*----------------- Libsas Initialization Stuff----------------------
238 * Set various fields in the sas_ha struct:
241 sas_ha
->sas_ha_name
= DRV_NAME
;
242 sas_ha
->lldd_module
= THIS_MODULE
;
243 sas_ha
->sas_addr
= &isci_host
->phys
[0].sas_addr
[0];
245 /* set the array of phy and port structs. */
246 for (i
= 0; i
< SCI_MAX_PHYS
; i
++) {
247 sas_phys
[i
] = &isci_host
->phys
[i
].sas_phy
;
248 sas_ports
[i
] = &isci_host
->ports
[i
].sas_port
;
251 sas_ha
->sas_phy
= sas_phys
;
252 sas_ha
->sas_port
= sas_ports
;
253 sas_ha
->num_phys
= SCI_MAX_PHYS
;
255 sas_ha
->lldd_queue_size
= ISCI_CAN_QUEUE_VAL
;
256 sas_ha
->lldd_max_execute_num
= 1;
257 sas_ha
->strict_wide_ports
= 1;
259 sas_register_ha(sas_ha
);
264 static void isci_unregister(struct isci_host
*isci_host
)
266 struct Scsi_Host
*shost
;
271 shost
= isci_host
->shost
;
273 sas_unregister_ha(&isci_host
->sas_ha
);
275 sas_remove_host(isci_host
->shost
);
276 scsi_remove_host(isci_host
->shost
);
277 scsi_host_put(isci_host
->shost
);
280 static int __devinit
isci_pci_init(struct pci_dev
*pdev
)
282 int err
, bar_num
, bar_mask
= 0;
283 void __iomem
* const *iomap
;
285 err
= pcim_enable_device(pdev
);
288 "failed enable PCI device %s!\n",
293 for (bar_num
= 0; bar_num
< SCI_PCI_BAR_COUNT
; bar_num
++)
294 bar_mask
|= 1 << (bar_num
* 2);
296 err
= pcim_iomap_regions(pdev
, bar_mask
, DRV_NAME
);
300 iomap
= pcim_iomap_table(pdev
);
304 pci_set_master(pdev
);
306 err
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(64));
308 err
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
313 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(64));
315 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
323 static int num_controllers(struct pci_dev
*pdev
)
325 /* bar size alone can tell us if we are running with a dual controller
326 * part, no need to trust revision ids that might be under broken firmware
329 resource_size_t scu_bar_size
= pci_resource_len(pdev
, SCI_SCU_BAR
*2);
330 resource_size_t smu_bar_size
= pci_resource_len(pdev
, SCI_SMU_BAR
*2);
332 if (scu_bar_size
>= SCI_SCU_BAR_SIZE
*SCI_MAX_CONTROLLERS
&&
333 smu_bar_size
>= SCI_SMU_BAR_SIZE
*SCI_MAX_CONTROLLERS
)
334 return SCI_MAX_CONTROLLERS
;
339 static int isci_setup_interrupts(struct pci_dev
*pdev
)
341 int err
, i
, num_msix
;
342 struct isci_host
*ihost
;
343 struct isci_pci_info
*pci_info
= to_pci_info(pdev
);
346 * Determine the number of vectors associated with this
349 num_msix
= num_controllers(pdev
) * SCI_NUM_MSI_X_INT
;
351 for (i
= 0; i
< num_msix
; i
++)
352 pci_info
->msix_entries
[i
].entry
= i
;
354 err
= pci_enable_msix(pdev
, pci_info
->msix_entries
, num_msix
);
358 for (i
= 0; i
< num_msix
; i
++) {
359 int id
= i
/ SCI_NUM_MSI_X_INT
;
360 struct msix_entry
*msix
= &pci_info
->msix_entries
[i
];
363 ihost
= pci_info
->hosts
[id
];
364 /* odd numbered vectors are error interrupts */
366 isr
= isci_error_isr
;
370 err
= devm_request_irq(&pdev
->dev
, msix
->vector
, isr
, 0,
371 DRV_NAME
"-msix", ihost
);
375 dev_info(&pdev
->dev
, "msix setup failed falling back to intx\n");
377 id
= i
/ SCI_NUM_MSI_X_INT
;
378 ihost
= pci_info
->hosts
[id
];
379 msix
= &pci_info
->msix_entries
[i
];
380 devm_free_irq(&pdev
->dev
, msix
->vector
, ihost
);
382 pci_disable_msix(pdev
);
388 for_each_isci_host(i
, ihost
, pdev
) {
389 err
= devm_request_irq(&pdev
->dev
, pdev
->irq
, isci_intx_isr
,
390 IRQF_SHARED
, DRV_NAME
"-intx", ihost
);
397 static struct isci_host
*isci_host_alloc(struct pci_dev
*pdev
, int id
)
399 struct isci_host
*isci_host
;
400 struct Scsi_Host
*shost
;
403 isci_host
= devm_kzalloc(&pdev
->dev
, sizeof(*isci_host
), GFP_KERNEL
);
407 isci_host
->pdev
= pdev
;
410 shost
= scsi_host_alloc(&isci_sht
, sizeof(void *));
413 isci_host
->shost
= shost
;
415 err
= isci_host_init(isci_host
);
419 SHOST_TO_SAS_HA(shost
) = &isci_host
->sas_ha
;
420 isci_host
->sas_ha
.core
.shost
= shost
;
421 shost
->transportt
= isci_transport_template
;
425 shost
->max_cmd_len
= MAX_COMMAND_SIZE
;
427 err
= scsi_add_host(shost
, &pdev
->dev
);
431 err
= isci_register_sas_ha(isci_host
);
433 goto err_shost_remove
;
438 scsi_remove_host(shost
);
440 scsi_host_put(shost
);
445 static int __devinit
isci_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*id
)
447 struct isci_pci_info
*pci_info
;
449 struct isci_host
*isci_host
;
450 const struct firmware
*fw
= NULL
;
451 struct isci_orom
*orom
= NULL
;
452 char *source
= "(platform)";
454 dev_info(&pdev
->dev
, "driver configured for rev: %d silicon\n",
457 pci_info
= devm_kzalloc(&pdev
->dev
, sizeof(*pci_info
), GFP_KERNEL
);
460 pci_set_drvdata(pdev
, pci_info
);
463 orom
= isci_get_efi_var(pdev
);
466 orom
= isci_request_oprom(pdev
);
468 for (i
= 0; orom
&& i
< ARRAY_SIZE(orom
->ctrl
); i
++) {
469 if (sci_oem_parameters_validate(&orom
->ctrl
[i
])) {
471 "[%d]: invalid oem parameters detected, falling back to firmware\n", i
);
472 devm_kfree(&pdev
->dev
, orom
);
479 source
= "(firmware)";
480 orom
= isci_request_firmware(pdev
, fw
);
482 /* TODO convert this to WARN_TAINT_ONCE once the
483 * orom/efi parameter support is widely available
486 "Loading user firmware failed, using default "
489 "Default OEM configuration being used: 4 "
490 "narrow ports, and default SAS Addresses\n");
496 "OEM SAS parameters (version: %u.%u) loaded %s\n",
497 (orom
->hdr
.version
& 0xf0) >> 4,
498 (orom
->hdr
.version
& 0xf), source
);
500 pci_info
->orom
= orom
;
502 err
= isci_pci_init(pdev
);
506 for (i
= 0; i
< num_controllers(pdev
); i
++) {
507 struct isci_host
*h
= isci_host_alloc(pdev
, i
);
513 pci_info
->hosts
[i
] = h
;
516 err
= isci_setup_interrupts(pdev
);
520 for_each_isci_host(i
, isci_host
, pdev
)
521 scsi_scan_host(isci_host
->shost
);
526 for_each_isci_host(i
, isci_host
, pdev
)
527 isci_unregister(isci_host
);
531 static void __devexit
isci_pci_remove(struct pci_dev
*pdev
)
533 struct isci_host
*ihost
;
536 for_each_isci_host(i
, ihost
, pdev
) {
537 isci_unregister(ihost
);
538 isci_host_deinit(ihost
);
539 sci_controller_disable_interrupts(ihost
);
543 static struct pci_driver isci_pci_driver
= {
545 .id_table
= isci_id_table
,
546 .probe
= isci_pci_probe
,
547 .remove
= __devexit_p(isci_pci_remove
),
550 static __init
int isci_init(void)
554 pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
555 DRV_NAME
, DRV_VERSION
);
557 isci_transport_template
= sas_domain_attach_transport(&isci_transport_ops
);
558 if (!isci_transport_template
)
561 err
= pci_register_driver(&isci_pci_driver
);
563 sas_release_transport(isci_transport_template
);
568 static __exit
void isci_exit(void)
570 pci_unregister_driver(&isci_pci_driver
);
571 sas_release_transport(isci_transport_template
);
574 MODULE_LICENSE("Dual BSD/GPL");
575 MODULE_FIRMWARE(ISCI_FW_NAME
);
576 module_init(isci_init
);
577 module_exit(isci_exit
);