arch/arm/mach-imx/ehci-imx5.c

   1 /*
   2  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
   3  * Copyright (C) 2010 Freescale Semiconductor, Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License as published by the
   7  * Free Software Foundation; either version 2 of the License, or (at your
   8  * option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  12  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  13  * for more details.
  14  */
  15
  16 #include <linux/platform_device.h>
  17 #include <linux/io.h>
  18
  19 #include <mach/hardware.h>
  20 #include <mach/mxc_ehci.h>
  21
  22 #define MXC_OTG_OFFSET                  0
  23 #define MXC_H1_OFFSET                   0x200
  24 #define MXC_H2_OFFSET                   0x400
  25
  26 /* USB_CTRL */
  27 #define MXC_OTG_UCTRL_OWIE_BIT          (1 << 27)       /* OTG wakeup intr enable */
  28 #define MXC_OTG_UCTRL_OPM_BIT           (1 << 24)       /* OTG power mask */
  29 #define MXC_H1_UCTRL_H1UIE_BIT          (1 << 12)       /* Host1 ULPI interrupt enable */
  30 #define MXC_H1_UCTRL_H1WIE_BIT          (1 << 11)       /* HOST1 wakeup intr enable */
  31 #define MXC_H1_UCTRL_H1PM_BIT           (1 <<  8)               /* HOST1 power mask */
  32
  33 /* USB_PHY_CTRL_FUNC */
  34 #define MXC_OTG_PHYCTRL_OC_DIS_BIT      (1 << 8)        /* OTG Disable Overcurrent Event */
  35 #define MXC_H1_OC_DIS_BIT               (1 << 5)        /* UH1 Disable Overcurrent Event */
  36
  37 /* USBH2CTRL */
  38 #define MXC_H2_UCTRL_H2UIE_BIT          (1 << 8)
  39 #define MXC_H2_UCTRL_H2WIE_BIT          (1 << 7)
  40 #define MXC_H2_UCTRL_H2PM_BIT           (1 << 4)
  41
  42 #define MXC_USBCMD_OFFSET               0x140
  43
  44 /* USBCMD */
  45 #define MXC_UCMD_ITC_NO_THRESHOLD_MASK  (~(0xff << 16)) /* Interrupt Threshold Control */
  46
  47 int mx51_initialize_usb_hw(int port, unsigned int flags)
  48 {
  49         unsigned int v;
  50         void __iomem *usb_base;
  51         void __iomem *usbotg_base;
  52         void __iomem *usbother_base;
  53         int ret = 0;
  54
  55         usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
  56         if (!usb_base) {
  57                 printk(KERN_ERR "%s(): ioremap failed\n", __func__);
  58                 return -ENOMEM;
  59         }
  60
  61         switch (port) {
  62         case 0: /* OTG port */
  63                 usbotg_base = usb_base + MXC_OTG_OFFSET;
  64                 break;
  65         case 1: /* Host 1 port */
  66                 usbotg_base = usb_base + MXC_H1_OFFSET;
  67                 break;
  68         case 2: /* Host 2 port */
  69                 usbotg_base = usb_base + MXC_H2_OFFSET;
  70                 break;
  71         default:
  72                 printk(KERN_ERR"%s no such port %d\n", __func__, port);
  73                 ret = -ENOENT;
  74                 goto error;
  75         }
  76         usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
  77
  78         switch (port) {
  79         case 0: /*OTG port */
  80                 if (flags & MXC_EHCI_INTERNAL_PHY) {
  81                         v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
  82
  83                         if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
  84                                 /* OC/USBPWR is not used */
  85                                 v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
  86                         } else {
  87                                 /* OC/USBPWR is used */
  88                                 v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
  89                         }
  90                         __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
  91
  92                         v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
  93                         if (flags & MXC_EHCI_WAKEUP_ENABLED)
  94                                 v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
  95                         else
  96                                 v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
  97                         if (flags & MXC_EHCI_POWER_PINS_ENABLED)
  98                                 v |= MXC_OTG_UCTRL_OPM_BIT;
  99                         else
 100                                 v &= ~MXC_OTG_UCTRL_OPM_BIT;
 101                         __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 102                 }
 103                 break;
 104         case 1: /* Host 1 */
 105                 /*Host ULPI */
 106                 v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
 107                 if (flags & MXC_EHCI_WAKEUP_ENABLED) {
 108                         /* HOST1 wakeup/ULPI intr enable */
 109                         v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
 110                 } else {
 111                         /* HOST1 wakeup/ULPI intr disable */
 112                         v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
 113                 }
 114
 115                 if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 116                         v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
 117                 else
 118                         v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
 119                 __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 120
 121                 v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 122                 if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 123                         v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
 124                 else
 125                         v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
 126                 __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 127
 128                 v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
 129                 if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
 130                         /* Interrupt Threshold Control:Immediate (no threshold) */
 131                         v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
 132                 __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
 133                 break;
 134         case 2: /* Host 2 ULPI */
 135                 v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
 136                 if (flags & MXC_EHCI_WAKEUP_ENABLED) {
 137                         /* HOST1 wakeup/ULPI intr enable */
 138                         v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
 139                 } else {
 140                         /* HOST1 wakeup/ULPI intr disable */
 141                         v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
 142                 }
 143
 144                 if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 145                         v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
 146                 else
 147                         v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
 148                 __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
 149                 break;
 150         }
 151
 152 error:
 153         iounmap(usb_base);
 154         return ret;
 155 }
 156