spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / arch / arm / mach-ks8695 / pci.c
blobb26f992071df4553df94bf2da1d8356af03cc56f
1 /*
2 * arch/arm/mach-ks8695/pci.c
4 * Copyright (C) 2003, Micrel Semiconductors
5 * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com>
6 * Copyright (C) 2006, Ben Dooks
7 * Copyright (C) 2007, Andrew Victor
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/kernel.h>
25 #include <linux/pci.h>
26 #include <linux/mm.h>
27 #include <linux/init.h>
28 #include <linux/irq.h>
29 #include <linux/delay.h>
30 #include <linux/io.h>
32 #include <asm/signal.h>
33 #include <asm/mach/pci.h>
34 #include <mach/hardware.h>
36 #include <mach/devices.h>
37 #include <mach/regs-pci.h>
40 static int pci_dbg;
41 static int pci_cfg_dbg;
44 static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
46 unsigned long pbca;
48 pbca = PBCA_ENABLE | (where & ~3);
49 pbca |= PCI_SLOT(devfn) << 11 ;
50 pbca |= PCI_FUNC(devfn) << 8;
51 pbca |= bus_nr << 16;
53 if (bus_nr == 0) {
54 /* use Type-0 transaction */
55 __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
56 } else {
57 /* use Type-1 transaction */
58 __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
64 * The KS8695 datasheet prohibits anything other than 32bit accesses
65 * to the IO registers, so all our configuration must be done with
66 * 32bit operations, and the correct bit masking and shifting.
69 static int ks8695_pci_readconfig(struct pci_bus *bus,
70 unsigned int devfn, int where, int size, u32 *value)
72 ks8695_pci_setupconfig(bus->number, devfn, where);
74 *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
76 switch (size) {
77 case 4:
78 break;
79 case 2:
80 *value = *value >> ((where & 2) * 8);
81 *value &= 0xffff;
82 break;
83 case 1:
84 *value = *value >> ((where & 3) * 8);
85 *value &= 0xff;
86 break;
89 if (pci_cfg_dbg) {
90 printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
91 bus->number, devfn, where, size, *value,
92 __raw_readl(KS8695_PCI_VA + KS8695_PBCD));
95 return PCIBIOS_SUCCESSFUL;
98 static int ks8695_pci_writeconfig(struct pci_bus *bus,
99 unsigned int devfn, int where, int size, u32 value)
101 unsigned long tmp;
103 if (pci_cfg_dbg) {
104 printk("write: %d,%08x,%02x,%d: %08x\n",
105 bus->number, devfn, where, size, value);
108 ks8695_pci_setupconfig(bus->number, devfn, where);
110 switch (size) {
111 case 4:
112 __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
113 break;
114 case 2:
115 tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
116 tmp &= ~(0xffff << ((where & 2) * 8));
117 tmp |= value << ((where & 2) * 8);
119 __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
120 break;
121 case 1:
122 tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
123 tmp &= ~(0xff << ((where & 3) * 8));
124 tmp |= value << ((where & 3) * 8);
126 __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
127 break;
130 return PCIBIOS_SUCCESSFUL;
133 static void ks8695_local_writeconfig(int where, u32 value)
135 ks8695_pci_setupconfig(0, 0, where);
136 __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
139 static struct pci_ops ks8695_pci_ops = {
140 .read = ks8695_pci_readconfig,
141 .write = ks8695_pci_writeconfig,
144 static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
146 return pci_scan_root_bus(NULL, sys->busnr, &ks8695_pci_ops, sys,
147 &sys->resources);
150 static struct resource pci_mem = {
151 .name = "PCI Memory space",
152 .start = KS8695_PCIMEM_PA,
153 .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
154 .flags = IORESOURCE_MEM,
157 static struct resource pci_io = {
158 .name = "PCI IO space",
159 .start = KS8695_PCIIO_PA,
160 .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
161 .flags = IORESOURCE_IO,
164 static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
166 if (nr > 0)
167 return 0;
169 request_resource(&iomem_resource, &pci_mem);
170 request_resource(&ioport_resource, &pci_io);
172 pci_add_resource(&sys->resources, &pci_io);
173 pci_add_resource(&sys->resources, &pci_mem);
175 /* Assign and enable processor bridge */
176 ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
178 /* Enable bus-master & Memory Space access */
179 ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
181 /* Set cache-line size & latency. */
182 ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
184 /* Reserve PCI memory space for PCI-AHB resources */
185 if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
186 printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
187 return -EBUSY;
190 return 1;
193 static inline unsigned int size_mask(unsigned long size)
195 return (~size) + 1;
198 static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
200 unsigned long pc = instruction_pointer(regs);
201 unsigned long instr = *(unsigned long *)pc;
202 unsigned long cmdstat;
204 cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
206 printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
207 addr, fsr, regs->ARM_pc, regs->ARM_lr,
208 cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
209 cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
210 cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
211 cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
212 cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " "
215 __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
218 * If the instruction being executed was a read,
219 * make it look like it read all-ones.
221 if ((instr & 0x0c100000) == 0x04100000) {
222 int reg = (instr >> 12) & 15;
223 unsigned long val;
225 if (instr & 0x00400000)
226 val = 255;
227 else
228 val = -1;
230 regs->uregs[reg] = val;
231 regs->ARM_pc += 4;
232 return 0;
235 if ((instr & 0x0e100090) == 0x00100090) {
236 int reg = (instr >> 12) & 15;
238 regs->uregs[reg] = -1;
239 regs->ARM_pc += 4;
240 return 0;
243 return 1;
246 static void __init ks8695_pci_preinit(void)
248 /* make software reset to avoid freeze if PCI bus was messed up */
249 __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
251 /* stage 1 initialization, subid, subdevice = 0x0001 */
252 __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
254 /* stage 2 initialization */
255 /* prefetch limits with 16 words, retry enable */
256 __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
258 /* configure memory mapping */
259 __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
260 __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
261 __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
262 __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
264 /* configure IO mapping */
265 __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
266 __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
267 __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
268 __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
270 /* hook in fault handlers */
271 hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
272 hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
275 static void ks8695_show_pciregs(void)
277 if (!pci_dbg)
278 return;
280 printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
281 printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
282 printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
283 printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
284 printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
285 printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
286 printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
288 printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
289 printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
291 printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
292 printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
293 printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
294 printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
296 printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
297 printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
298 printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
299 printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
303 static struct hw_pci ks8695_pci __initdata = {
304 .nr_controllers = 1,
305 .preinit = ks8695_pci_preinit,
306 .setup = ks8695_pci_setup,
307 .scan = ks8695_pci_scan_bus,
308 .postinit = NULL,
309 .swizzle = pci_std_swizzle,
310 .map_irq = NULL,
313 void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
315 if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
316 printk("PCI: KS8695 in guest mode, not initialising\n");
317 return;
320 pcibios_min_io = 0;
321 pcibios_min_mem = 0;
323 printk(KERN_INFO "PCI: Initialising\n");
324 ks8695_show_pciregs();
326 /* set Mode */
327 __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
329 ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */
331 pci_common_init(&ks8695_pci);