spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / arch / arm / mach-omap1 / Makefile
blob11c85cd2731a10115e43c6bd4d95aaf956d28198
2 # Makefile for the linux kernel.
5 # Common support
6 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
7 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
9 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
11 obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
13 # Power Management
14 obj-$(CONFIG_PM) += pm.o sleep.o
16 # DSP
17 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
18 mailbox_mach-objs := mailbox.o
20 i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
21 obj-y += $(i2c-omap-m) $(i2c-omap-y)
23 led-y := leds.o
25 usb-fs-$(CONFIG_USB) := usb.o
26 obj-y += $(usb-fs-m) $(usb-fs-y)
28 # Specific board support
29 obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o
30 obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
31 obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
32 obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
33 obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o
34 obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
35 obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o
36 obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
37 obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
38 obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
39 obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
40 obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o
41 obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ams-delta-fiq.o \
42 ams-delta-fiq-handler.o
43 obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o
44 obj-$(CONFIG_MACH_HERALD) += board-htcherald.o
46 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
47 # Innovator-1510 FPGA
48 obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o
49 endif
51 # GPIO
52 obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o
53 obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
54 obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
55 obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
57 # LEDs support
58 led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
59 led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
60 led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
61 led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
62 led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
63 obj-$(CONFIG_LEDS) += $(led-y)
65 ifneq ($(CONFIG_FB_OMAP),)
66 obj-y += lcd_dma.o
67 endif