?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / arch / arm / mach-realview / core.c
blobacd329afc3ac71a84d0aeea506942373760283c4
1 /*
2 * linux/arch/arm/mach-realview/core.c
3 *
4 * Copyright (C) 1999 - 2003 ARM Limited
5 * Copyright (C) 2000 Deep Blue Solutions Ltd
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21 #include <linux/init.h>
22 #include <linux/platform_device.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/device.h>
25 #include <linux/interrupt.h>
26 #include <linux/amba/bus.h>
27 #include <linux/amba/clcd.h>
28 #include <linux/io.h>
29 #include <linux/smsc911x.h>
30 #include <linux/ata_platform.h>
31 #include <linux/amba/mmci.h>
32 #include <linux/gfp.h>
33 #include <linux/clkdev.h>
34 #include <linux/mtd/physmap.h>
35
36 #include <asm/system.h>
37 #include <mach/hardware.h>
38 #include <asm/irq.h>
39 #include <asm/leds.h>
40 #include <asm/mach-types.h>
41 #include <asm/hardware/arm_timer.h>
42 #include <asm/hardware/icst.h>
43
44 #include <asm/mach/arch.h>
45 #include <asm/mach/irq.h>
46 #include <asm/mach/map.h>
47
48 #include <asm/hardware/gic.h>
49
50 #include <mach/platform.h>
51 #include <mach/irqs.h>
52 #include <asm/hardware/timer-sp.h>
53
54 #include <plat/clcd.h>
55 #include <plat/sched_clock.h>
56
57 #include "core.h"
58
59 #define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
60
61 static void realview_flash_set_vpp(struct platform_device *pdev, int on)
62 {
63 u32 val;
64
65 val = __raw_readl(REALVIEW_FLASHCTRL);
66 if (on)
67 val |= REALVIEW_FLASHPROG_FLVPPEN;
68 else
69 val &= ~REALVIEW_FLASHPROG_FLVPPEN;
70 __raw_writel(val, REALVIEW_FLASHCTRL);
71 }
72
73 static struct physmap_flash_data realview_flash_data = {
74 .width = 4,
75 .set_vpp = realview_flash_set_vpp,
76 };
77
78 struct platform_device realview_flash_device = {
79 .name = "physmap-flash",
80 .id = 0,
81 .dev = {
82 .platform_data = &realview_flash_data,
83 },
84 };
85
86 int realview_flash_register(struct resource *res, u32 num)
87 {
88 realview_flash_device.resource = res;
89 realview_flash_device.num_resources = num;
90 return platform_device_register(&realview_flash_device);
91 }
92
93 static struct smsc911x_platform_config smsc911x_config = {
94 .flags = SMSC911X_USE_32BIT,
95 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
96 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
97 .phy_interface = PHY_INTERFACE_MODE_MII,
98 };
99
100 static struct platform_device realview_eth_device = {
101 .name = "smsc911x",
102 .id = 0,
103 .num_resources = 2,
104 };
105
106 int realview_eth_register(const char *name, struct resource *res)
107 {
108 if (name)
109 realview_eth_device.name = name;
110 realview_eth_device.resource = res;
111 if (strcmp(realview_eth_device.name, "smsc911x") == 0)
112 realview_eth_device.dev.platform_data = &smsc911x_config;
113
114 return platform_device_register(&realview_eth_device);
115 }
116
117 struct platform_device realview_usb_device = {
118 .name = "isp1760",
119 .num_resources = 2,
120 };
121
122 int realview_usb_register(struct resource *res)
123 {
124 realview_usb_device.resource = res;
125 return platform_device_register(&realview_usb_device);
126 }
127
128 static struct pata_platform_info pata_platform_data = {
129 .ioport_shift = 1,
130 };
131
132 static struct resource pata_resources[] = {
133 [0] = {
134 .start = REALVIEW_CF_BASE,
135 .end = REALVIEW_CF_BASE + 0xff,
136 .flags = IORESOURCE_MEM,
137 },
138 [1] = {
139 .start = REALVIEW_CF_BASE + 0x100,
140 .end = REALVIEW_CF_BASE + SZ_4K - 1,
141 .flags = IORESOURCE_MEM,
142 },
143 };
144
145 struct platform_device realview_cf_device = {
146 .name = "pata_platform",
147 .id = -1,
148 .num_resources = ARRAY_SIZE(pata_resources),
149 .resource = pata_resources,
150 .dev = {
151 .platform_data = &pata_platform_data,
152 },
153 };
154
155 static struct resource realview_i2c_resource = {
156 .start = REALVIEW_I2C_BASE,
157 .end = REALVIEW_I2C_BASE + SZ_4K - 1,
158 .flags = IORESOURCE_MEM,
159 };
160
161 struct platform_device realview_i2c_device = {
162 .name = "versatile-i2c",
163 .id = 0,
164 .num_resources = 1,
165 .resource = &realview_i2c_resource,
166 };
167
168 static struct i2c_board_info realview_i2c_board_info[] = {
169 {
170 I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
171 },
172 };
173
174 static int __init realview_i2c_init(void)
175 {
176 return i2c_register_board_info(0, realview_i2c_board_info,
177 ARRAY_SIZE(realview_i2c_board_info));
178 }
179 arch_initcall(realview_i2c_init);
180
181 #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
182
183 /*
184 * This is only used if GPIOLIB support is disabled
185 */
186 static unsigned int realview_mmc_status(struct device *dev)
187 {
188 struct amba_device *adev = container_of(dev, struct amba_device, dev);
189 u32 mask;
190
191 if (machine_is_realview_pb1176()) {
192 static bool inserted = false;
193
194 /*
195 * The PB1176 does not have the status register,
196 * assume it is inserted at startup, then invert
197 * for each call so card insertion/removal will
198 * be detected anyway. This will not be called if
199 * GPIO on PL061 is active, which is the proper
200 * way to do this on the PB1176.
201 */
202 inserted = !inserted;
203 return inserted ? 0 : 1;
204 }
205
206 if (adev->res.start == REALVIEW_MMCI0_BASE)
207 mask = 1;
208 else
209 mask = 2;
210
211 return readl(REALVIEW_SYSMCI) & mask;
212 }
213
214 struct mmci_platform_data realview_mmc0_plat_data = {
215 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
216 .status = realview_mmc_status,
217 .gpio_wp = 17,
218 .gpio_cd = 16,
219 .cd_invert = true,
220 };
221
222 struct mmci_platform_data realview_mmc1_plat_data = {
223 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
224 .status = realview_mmc_status,
225 .gpio_wp = 19,
226 .gpio_cd = 18,
227 .cd_invert = true,
228 };
229
230 /*
231 * Clock handling
232 */
233 static const struct icst_params realview_oscvco_params = {
234 .ref = 24000000,
235 .vco_max = ICST307_VCO_MAX,
236 .vco_min = ICST307_VCO_MIN,
237 .vd_min = 4 + 8,
238 .vd_max = 511 + 8,
239 .rd_min = 1 + 2,
240 .rd_max = 127 + 2,
241 .s2div = icst307_s2div,
242 .idx2s = icst307_idx2s,
243 };
244
245 static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
246 {
247 void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
248 u32 val;
249
250 val = readl(clk->vcoreg) & ~0x7ffff;
251 val |= vco.v | (vco.r << 9) | (vco.s << 16);
252
253 writel(0xa05f, sys_lock);
254 writel(val, clk->vcoreg);
255 writel(0, sys_lock);
256 }
257
258 static const struct clk_ops oscvco_clk_ops = {
259 .round = icst_clk_round,
260 .set = icst_clk_set,
261 .setvco = realview_oscvco_set,
262 };
263
264 static struct clk oscvco_clk = {
265 .ops = &oscvco_clk_ops,
266 .params = &realview_oscvco_params,
267 };
268
269 /*
270 * These are fixed clocks.
271 */
272 static struct clk ref24_clk = {
273 .rate = 24000000,
274 };
275
276 static struct clk sp804_clk = {
277 .rate = 1000000,
278 };
279
280 static struct clk dummy_apb_pclk;
281
282 static struct clk_lookup lookups[] = {
283 { /* Bus clock */
284 .con_id = "apb_pclk",
285 .clk = &dummy_apb_pclk,
286 }, { /* UART0 */
287 .dev_id = "dev:uart0",
288 .clk = &ref24_clk,
289 }, { /* UART1 */
290 .dev_id = "dev:uart1",
291 .clk = &ref24_clk,
292 }, { /* UART2 */
293 .dev_id = "dev:uart2",
294 .clk = &ref24_clk,
295 }, { /* UART3 */
296 .dev_id = "fpga:uart3",
297 .clk = &ref24_clk,
298 }, { /* UART3 is on the dev chip in PB1176 */
299 .dev_id = "dev:uart3",
300 .clk = &ref24_clk,
301 }, { /* UART4 only exists in PB1176 */
302 .dev_id = "fpga:uart4",
303 .clk = &ref24_clk,
304 }, { /* KMI0 */
305 .dev_id = "fpga:kmi0",
306 .clk = &ref24_clk,
307 }, { /* KMI1 */
308 .dev_id = "fpga:kmi1",
309 .clk = &ref24_clk,
310 }, { /* MMC0 */
311 .dev_id = "fpga:mmc0",
312 .clk = &ref24_clk,
313 }, { /* CLCD is in the PB1176 and EB DevChip */
314 .dev_id = "dev:clcd",
315 .clk = &oscvco_clk,
316 }, { /* PB:CLCD */
317 .dev_id = "issp:clcd",
318 .clk = &oscvco_clk,
319 }, { /* SSP */
320 .dev_id = "dev:ssp0",
321 .clk = &ref24_clk,
322 }, { /* SP804 timers */
323 .dev_id = "sp804",
324 .clk = &sp804_clk,
325 },
326 };
327
328 void __init realview_init_early(void)
329 {
330 void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
331
332 if (machine_is_realview_pb1176())
333 oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
334 else
335 oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
336
337 clkdev_add_table(lookups, ARRAY_SIZE(lookups));
338
339 versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
340 }
341
342 /*
343 * CLCD support.
344 */
345 #define SYS_CLCD_NLCDIOON (1 << 2)
346 #define SYS_CLCD_VDDPOSSWITCH (1 << 3)
347 #define SYS_CLCD_PWR3V5SWITCH (1 << 4)
348 #define SYS_CLCD_ID_MASK (0x1f << 8)
349 #define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
350 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
351 #define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
352 #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
353 #define SYS_CLCD_ID_VGA (0x1f << 8)
354
355 /*
356 * Disable all display connectors on the interface module.
357 */
358 static void realview_clcd_disable(struct clcd_fb *fb)
359 {
360 void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
361 u32 val;
362
363 val = readl(sys_clcd);
364 val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
365 writel(val, sys_clcd);
366 }
367
368 /*
369 * Enable the relevant connector on the interface module.
370 */
371 static void realview_clcd_enable(struct clcd_fb *fb)
372 {
373 void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
374 u32 val;
375
376 /*
377 * Enable the PSUs
378 */
379 val = readl(sys_clcd);
380 val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
381 writel(val, sys_clcd);
382 }
383
384 /*
385 * Detect which LCD panel is connected, and return the appropriate
386 * clcd_panel structure. Note: we do not have any information on
387 * the required timings for the 8.4in panel, so we presently assume
388 * VGA timings.
389 */
390 static int realview_clcd_setup(struct clcd_fb *fb)
391 {
392 void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
393 const char *panel_name, *vga_panel_name;
394 unsigned long framesize;
395 u32 val;
396
397 if (machine_is_realview_eb()) {
398 /* VGA, 16bpp */
399 framesize = 640 * 480 * 2;
400 vga_panel_name = "VGA";
401 } else {
402 /* XVGA, 16bpp */
403 framesize = 1024 * 768 * 2;
404 vga_panel_name = "XVGA";
405 }
406
407 val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
408 if (val == SYS_CLCD_ID_SANYO_3_8)
409 panel_name = "Sanyo TM38QV67A02A";
410 else if (val == SYS_CLCD_ID_SANYO_2_5)
411 panel_name = "Sanyo QVGA Portrait";
412 else if (val == SYS_CLCD_ID_EPSON_2_2)
413 panel_name = "Epson L2F50113T00";
414 else if (val == SYS_CLCD_ID_VGA)
415 panel_name = vga_panel_name;
416 else {
417 pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val);
418 panel_name = vga_panel_name;
419 }
420
421 fb->panel = versatile_clcd_get_panel(panel_name);
422 if (!fb->panel)
423 return -EINVAL;
424
425 return versatile_clcd_setup_dma(fb, framesize);
426 }
427
428 struct clcd_board clcd_plat_data = {
429 .name = "RealView",
430 .caps = CLCD_CAP_ALL,
431 .check = clcdfb_check,
432 .decode = clcdfb_decode,
433 .disable = realview_clcd_disable,
434 .enable = realview_clcd_enable,
435 .setup = realview_clcd_setup,
436 .mmap = versatile_clcd_mmap_dma,
437 .remove = versatile_clcd_remove_dma,
438 };
439
440 #ifdef CONFIG_LEDS
441 #define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
442
443 void realview_leds_event(led_event_t ledevt)
444 {
445 unsigned long flags;
446 u32 val;
447 u32 led = 1 << smp_processor_id();
448
449 local_irq_save(flags);
450 val = readl(VA_LEDS_BASE);
451
452 switch (ledevt) {
453 case led_idle_start:
454 val = val & ~led;
455 break;
456
457 case led_idle_end:
458 val = val | led;
459 break;
460
461 case led_timer:
462 val = val ^ REALVIEW_SYS_LED7;
463 break;
464
465 case led_halted:
466 val = 0;
467 break;
468
469 default:
470 break;
471 }
472
473 writel(val, VA_LEDS_BASE);
474 local_irq_restore(flags);
475 }
476 #endif /* CONFIG_LEDS */
477
478 /*
479 * Where is the timer (VA)?
480 */
481 void __iomem *timer0_va_base;
482 void __iomem *timer1_va_base;
483 void __iomem *timer2_va_base;
484 void __iomem *timer3_va_base;
485
486 /*
487 * Set up the clock source and clock events devices
488 */
489 void __init realview_timer_init(unsigned int timer_irq)
490 {
491 u32 val;
492
493 /*
494 * set clock frequency:
495 * REALVIEW_REFCLK is 32KHz
496 * REALVIEW_TIMCLK is 1MHz
497 */
498 val = readl(__io_address(REALVIEW_SCTL_BASE));
499 writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
500 (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
501 (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
502 (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
503 __io_address(REALVIEW_SCTL_BASE));
504
505 /*
506 * Initialise to a known state (all timers off)
507 */
508 writel(0, timer0_va_base + TIMER_CTRL);
509 writel(0, timer1_va_base + TIMER_CTRL);
510 writel(0, timer2_va_base + TIMER_CTRL);
511 writel(0, timer3_va_base + TIMER_CTRL);
512
513 sp804_clocksource_init(timer3_va_base, "timer3");
514 sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
515 }
516
517 /*
518 * Setup the memory banks.
519 */
520 void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo)
521 {
522 /*
523 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
524 * Half of this is mirrored at 0.
525 */
526 #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
527 meminfo->bank[0].start = 0x70000000;
528 meminfo->bank[0].size = SZ_512M;
529 meminfo->nr_banks = 1;
530 #else
531 meminfo->bank[0].start = 0;
532 meminfo->bank[0].size = SZ_256M;
533 meminfo->nr_banks = 1;
534 #endif
535 }