arch/mips/kernel/cevt-r4k.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2007 MIPS Technologies, Inc.
   7  * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
   8  */
   9 #include <linux/clockchips.h>
  10 #include <linux/interrupt.h>
  11 #include <linux/percpu.h>
  12 #include <linux/smp.h>
  13 #include <linux/irq.h>
  14
  15 #include <asm/smtc_ipi.h>
  16 #include <asm/time.h>
  17 #include <asm/cevt-r4k.h>
  18
  19 /*
  20  * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
  21  * of these routines with SMTC-specific variants.
  22  */
  23
  24 #ifndef CONFIG_MIPS_MT_SMTC
  25
  26 static int mips_next_event(unsigned long delta,
  27                            struct clock_event_device *evt)
  28 {
  29         unsigned int cnt;
  30         int res;
  31
  32         cnt = read_c0_count();
  33         cnt += delta;
  34         write_c0_compare(cnt);
  35         res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
  36         return res;
  37 }
  38
  39 #endif /* CONFIG_MIPS_MT_SMTC */
  40
  41 void mips_set_clock_mode(enum clock_event_mode mode,
  42                                 struct clock_event_device *evt)
  43 {
  44         /* Nothing to do ...  */
  45 }
  46
  47 DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
  48 int cp0_timer_irq_installed;
  49
  50 #ifndef CONFIG_MIPS_MT_SMTC
  51
  52 irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
  53 {
  54         const int r2 = cpu_has_mips_r2;
  55         struct clock_event_device *cd;
  56         int cpu = smp_processor_id();
  57
  58         /*
  59          * Suckage alert:
  60          * Before R2 of the architecture there was no way to see if a
  61          * performance counter interrupt was pending, so we have to run
  62          * the performance counter interrupt handler anyway.
  63          */
  64         if (handle_perf_irq(r2))
  65                 goto out;
  66
  67         /*
  68          * The same applies to performance counter interrupts.  But with the
  69          * above we now know that the reason we got here must be a timer
  70          * interrupt.  Being the paranoiacs we are we check anyway.
  71          */
  72         if (!r2 || (read_c0_cause() & (1 << 30))) {
  73                 /* Clear Count/Compare Interrupt */
  74                 write_c0_compare(read_c0_compare());
  75                 cd = &per_cpu(mips_clockevent_device, cpu);
  76                 cd->event_handler(cd);
  77         }
  78
  79 out:
  80         return IRQ_HANDLED;
  81 }
  82
  83 #endif /* Not CONFIG_MIPS_MT_SMTC */
  84
  85 struct irqaction c0_compare_irqaction = {
  86         .handler = c0_compare_interrupt,
  87         .flags = IRQF_PERCPU | IRQF_TIMER,
  88         .name = "timer",
  89 };
  90
  91
  92 void mips_event_handler(struct clock_event_device *dev)
  93 {
  94 }
  95
  96 /*
  97  * FIXME: This doesn't hold for the relocated E9000 compare interrupt.
  98  */
  99 static int c0_compare_int_pending(void)
 100 {
 101         return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
 102 }
 103
 104 /*
 105  * Compare interrupt can be routed and latched outside the core,
 106  * so wait up to worst case number of cycle counter ticks for timer interrupt
 107  * changes to propagate to the cause register.
 108  */
 109 #define COMPARE_INT_SEEN_TICKS 50
 110
 111 int c0_compare_int_usable(void)
 112 {
 113         unsigned int delta;
 114         unsigned int cnt;
 115
 116         /*
 117          * IP7 already pending?  Try to clear it by acking the timer.
 118          */
 119         if (c0_compare_int_pending()) {
 120                 cnt = read_c0_count();
 121                 write_c0_compare(cnt);
 122                 back_to_back_c0_hazard();
 123                 while (read_c0_count() < (cnt  + COMPARE_INT_SEEN_TICKS))
 124                         if (!c0_compare_int_pending())
 125                                 break;
 126                 if (c0_compare_int_pending())
 127                         return 0;
 128         }
 129
 130         for (delta = 0x10; delta <= 0x400000; delta <<= 1) {
 131                 cnt = read_c0_count();
 132                 cnt += delta;
 133                 write_c0_compare(cnt);
 134                 back_to_back_c0_hazard();
 135                 if ((int)(read_c0_count() - cnt) < 0)
 136                     break;
 137                 /* increase delta if the timer was already expired */
 138         }
 139
 140         while ((int)(read_c0_count() - cnt) <= 0)
 141                 ;       /* Wait for expiry  */
 142
 143         while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
 144                 if (c0_compare_int_pending())
 145                         break;
 146         if (!c0_compare_int_pending())
 147                 return 0;
 148         cnt = read_c0_count();
 149         write_c0_compare(cnt);
 150         back_to_back_c0_hazard();
 151         while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
 152                 if (!c0_compare_int_pending())
 153                         break;
 154         if (c0_compare_int_pending())
 155                 return 0;
 156
 157         /*
 158          * Feels like a real count / compare timer.
 159          */
 160         return 1;
 161 }
 162
 163 #ifndef CONFIG_MIPS_MT_SMTC
 164
 165 int __cpuinit r4k_clockevent_init(void)
 166 {
 167         unsigned int cpu = smp_processor_id();
 168         struct clock_event_device *cd;
 169         unsigned int irq;
 170
 171         if (!cpu_has_counter || !mips_hpt_frequency)
 172                 return -ENXIO;
 173
 174         if (!c0_compare_int_usable())
 175                 return -ENXIO;
 176
 177         /*
 178          * With vectored interrupts things are getting platform specific.
 179          * get_c0_compare_int is a hook to allow a platform to return the
 180          * interrupt number of it's liking.
 181          */
 182         irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
 183         if (get_c0_compare_int)
 184                 irq = get_c0_compare_int();
 185
 186         cd = &per_cpu(mips_clockevent_device, cpu);
 187
 188         cd->name                = "MIPS";
 189         cd->features            = CLOCK_EVT_FEAT_ONESHOT;
 190
 191         clockevent_set_clock(cd, mips_hpt_frequency);
 192
 193         /* Calculate the min / max delta */
 194         cd->max_delta_ns        = clockevent_delta2ns(0x7fffffff, cd);
 195         cd->min_delta_ns        = clockevent_delta2ns(0x300, cd);
 196
 197         cd->rating              = 300;
 198         cd->irq                 = irq;
 199         cd->cpumask             = cpumask_of(cpu);
 200         cd->set_next_event      = mips_next_event;
 201         cd->set_mode            = mips_set_clock_mode;
 202         cd->event_handler       = mips_event_handler;
 203
 204         clockevents_register_device(cd);
 205
 206         if (cp0_timer_irq_installed)
 207                 return 0;
 208
 209         cp0_timer_irq_installed = 1;
 210
 211         setup_irq(irq, &c0_compare_irqaction);
 212
 213         return 0;
 214 }
 215
 216 #endif /* Not CONFIG_MIPS_MT_SMTC */