arch/powerpc/platforms/chrp/setup.c

   1 /*
   2  *  Copyright (C) 1995  Linus Torvalds
   3  *  Adapted from 'alpha' version by Gary Thomas
   4  *  Modified by Cort Dougan (cort@cs.nmt.edu)
   5  */
   6
   7 /*
   8  * bootup setup stuff..
   9  */
  10
  11 #include <linux/errno.h>
  12 #include <linux/sched.h>
  13 #include <linux/kernel.h>
  14 #include <linux/mm.h>
  15 #include <linux/stddef.h>
  16 #include <linux/unistd.h>
  17 #include <linux/ptrace.h>
  18 #include <linux/user.h>
  19 #include <linux/tty.h>
  20 #include <linux/major.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/reboot.h>
  23 #include <linux/init.h>
  24 #include <linux/pci.h>
  25 #include <generated/utsrelease.h>
  26 #include <linux/adb.h>
  27 #include <linux/module.h>
  28 #include <linux/delay.h>
  29 #include <linux/console.h>
  30 #include <linux/seq_file.h>
  31 #include <linux/root_dev.h>
  32 #include <linux/initrd.h>
  33 #include <linux/timer.h>
  34
  35 #include <asm/io.h>
  36 #include <asm/pgtable.h>
  37 #include <asm/prom.h>
  38 #include <asm/pci-bridge.h>
  39 #include <asm/dma.h>
  40 #include <asm/machdep.h>
  41 #include <asm/irq.h>
  42 #include <asm/hydra.h>
  43 #include <asm/sections.h>
  44 #include <asm/time.h>
  45 #include <asm/i8259.h>
  46 #include <asm/mpic.h>
  47 #include <asm/rtas.h>
  48 #include <asm/xmon.h>
  49
  50 #include "chrp.h"
  51 #include "gg2.h"
  52
  53 void rtas_indicator_progress(char *, unsigned short);
  54
  55 int _chrp_type;
  56 EXPORT_SYMBOL(_chrp_type);
  57
  58 static struct mpic *chrp_mpic;
  59
  60 /* Used for doing CHRP event-scans */
  61 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
  62 unsigned long event_scan_interval;
  63
  64 extern unsigned long loops_per_jiffy;
  65
  66 /* To be replaced by RTAS when available */
  67 static unsigned int __iomem *briq_SPOR;
  68
  69 #ifdef CONFIG_SMP
  70 extern struct smp_ops_t chrp_smp_ops;
  71 #endif
  72
  73 static const char *gg2_memtypes[4] = {
  74         "FPM", "SDRAM", "EDO", "BEDO"
  75 };
  76 static const char *gg2_cachesizes[4] = {
  77         "256 KB", "512 KB", "1 MB", "Reserved"
  78 };
  79 static const char *gg2_cachetypes[4] = {
  80         "Asynchronous", "Reserved", "Flow-Through Synchronous",
  81         "Pipelined Synchronous"
  82 };
  83 static const char *gg2_cachemodes[4] = {
  84         "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
  85 };
  86
  87 static const char *chrp_names[] = {
  88         "Unknown",
  89         "","","",
  90         "Motorola",
  91         "IBM or Longtrail",
  92         "Genesi Pegasos",
  93         "Total Impact Briq"
  94 };
  95
  96 void chrp_show_cpuinfo(struct seq_file *m)
  97 {
  98         int i, sdramen;
  99         unsigned int t;
 100         struct device_node *root;
 101         const char *model = "";
 102
 103         root = of_find_node_by_path("/");
 104         if (root)
 105                 model = of_get_property(root, "model", NULL);
 106         seq_printf(m, "machine\t\t: CHRP %s\n", model);
 107
 108         /* longtrail (goldengate) stuff */
 109         if (model && !strncmp(model, "IBM,LongTrail", 13)) {
 110                 /* VLSI VAS96011/12 `Golden Gate 2' */
 111                 /* Memory banks */
 112                 sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
 113                            >>31) & 1;
 114                 for (i = 0; i < (sdramen ? 4 : 6); i++) {
 115                         t = in_le32(gg2_pci_config_base+
 116                                                  GG2_PCI_DRAM_BANK0+
 117                                                  i*4);
 118                         if (!(t & 1))
 119                                 continue;
 120                         switch ((t>>8) & 0x1f) {
 121                         case 0x1f:
 122                                 model = "4 MB";
 123                                 break;
 124                         case 0x1e:
 125                                 model = "8 MB";
 126                                 break;
 127                         case 0x1c:
 128                                 model = "16 MB";
 129                                 break;
 130                         case 0x18:
 131                                 model = "32 MB";
 132                                 break;
 133                         case 0x10:
 134                                 model = "64 MB";
 135                                 break;
 136                         case 0x00:
 137                                 model = "128 MB";
 138                                 break;
 139                         default:
 140                                 model = "Reserved";
 141                                 break;
 142                         }
 143                         seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
 144                                    gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
 145                 }
 146                 /* L2 cache */
 147                 t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
 148                 seq_printf(m, "board l2\t: %s %s (%s)\n",
 149                            gg2_cachesizes[(t>>7) & 3],
 150                            gg2_cachetypes[(t>>2) & 3],
 151                            gg2_cachemodes[t & 3]);
 152         }
 153         of_node_put(root);
 154 }
 155
 156 /*
 157  *  Fixes for the National Semiconductor PC78308VUL SuperI/O
 158  *
 159  *  Some versions of Open Firmware incorrectly initialize the IRQ settings
 160  *  for keyboard and mouse
 161  */
 162 static inline void __init sio_write(u8 val, u8 index)
 163 {
 164         outb(index, 0x15c);
 165         outb(val, 0x15d);
 166 }
 167
 168 static inline u8 __init sio_read(u8 index)
 169 {
 170         outb(index, 0x15c);
 171         return inb(0x15d);
 172 }
 173
 174 static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
 175                                      u8 type)
 176 {
 177         u8 level0, type0, active;
 178
 179         /* select logical device */
 180         sio_write(device, 0x07);
 181         active = sio_read(0x30);
 182         level0 = sio_read(0x70);
 183         type0 = sio_read(0x71);
 184         if (level0 != level || type0 != type || !active) {
 185                 printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
 186                        "remapping to level %d, type %d, active\n",
 187                        name, level0, type0, !active ? "in" : "", level, type);
 188                 sio_write(0x01, 0x30);
 189                 sio_write(level, 0x70);
 190                 sio_write(type, 0x71);
 191         }
 192 }
 193
 194 static void __init sio_init(void)
 195 {
 196         struct device_node *root;
 197         const char *model;
 198
 199         root = of_find_node_by_path("/");
 200         if (!root)
 201                 return;
 202
 203         model = of_get_property(root, "model", NULL);
 204         if (model && !strncmp(model, "IBM,LongTrail", 13)) {
 205                 /* logical device 0 (KBC/Keyboard) */
 206                 sio_fixup_irq("keyboard", 0, 1, 2);
 207                 /* select logical device 1 (KBC/Mouse) */
 208                 sio_fixup_irq("mouse", 1, 12, 2);
 209         }
 210
 211         of_node_put(root);
 212 }
 213
 214
 215 static void __init pegasos_set_l2cr(void)
 216 {
 217         struct device_node *np;
 218
 219         /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
 220         if (_chrp_type != _CHRP_Pegasos)
 221                 return;
 222
 223         /* Enable L2 cache if needed */
 224         np = of_find_node_by_type(NULL, "cpu");
 225         if (np != NULL) {
 226                 const unsigned int *l2cr = of_get_property(np, "l2cr", NULL);
 227                 if (l2cr == NULL) {
 228                         printk ("Pegasos l2cr : no cpu l2cr property found\n");
 229                         goto out;
 230                 }
 231                 if (!((*l2cr) & 0x80000000)) {
 232                         printk ("Pegasos l2cr : L2 cache was not active, "
 233                                 "activating\n");
 234                         _set_L2CR(0);
 235                         _set_L2CR((*l2cr) | 0x80000000);
 236                 }
 237         }
 238 out:
 239         of_node_put(np);
 240 }
 241
 242 static void briq_restart(char *cmd)
 243 {
 244         local_irq_disable();
 245         if (briq_SPOR)
 246                 out_be32(briq_SPOR, 0);
 247         for(;;);
 248 }
 249
 250 /*
 251  * Per default, input/output-device points to the keyboard/screen
 252  * If no card is installed, the built-in serial port is used as a fallback.
 253  * But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
 254  * the the built-in serial node. Instead, a /failsafe node is created.
 255  */
 256 static void chrp_init_early(void)
 257 {
 258         struct device_node *node;
 259         const char *property;
 260
 261         if (strstr(cmd_line, "console="))
 262                 return;
 263         /* find the boot console from /chosen/stdout */
 264         if (!of_chosen)
 265                 return;
 266         node = of_find_node_by_path("/");
 267         if (!node)
 268                 return;
 269         property = of_get_property(node, "model", NULL);
 270         if (!property)
 271                 goto out_put;
 272         if (strcmp(property, "Pegasos2"))
 273                 goto out_put;
 274         /* this is a Pegasos2 */
 275         property = of_get_property(of_chosen, "linux,stdout-path", NULL);
 276         if (!property)
 277                 goto out_put;
 278         of_node_put(node);
 279         node = of_find_node_by_path(property);
 280         if (!node)
 281                 return;
 282         property = of_get_property(node, "device_type", NULL);
 283         if (!property)
 284                 goto out_put;
 285         if (strcmp(property, "serial"))
 286                 goto out_put;
 287         /*
 288          * The 9pin connector is either /failsafe
 289          * or /pci@80000000/isa@C/serial@i2F8
 290          * The optional graphics card has also type 'serial' in VGA mode.
 291          */
 292         property = of_get_property(node, "name", NULL);
 293         if (!property)
 294                 goto out_put;
 295         if (!strcmp(property, "failsafe") || !strcmp(property, "serial"))
 296                 add_preferred_console("ttyS", 0, NULL);
 297 out_put:
 298         of_node_put(node);
 299 }
 300
 301 void __init chrp_setup_arch(void)
 302 {
 303         struct device_node *root = of_find_node_by_path("/");
 304         const char *machine = NULL;
 305
 306         /* init to some ~sane value until calibrate_delay() runs */
 307         loops_per_jiffy = 50000000/HZ;
 308
 309         if (root)
 310                 machine = of_get_property(root, "model", NULL);
 311         if (machine && strncmp(machine, "Pegasos", 7) == 0) {
 312                 _chrp_type = _CHRP_Pegasos;
 313         } else if (machine && strncmp(machine, "IBM", 3) == 0) {
 314                 _chrp_type = _CHRP_IBM;
 315         } else if (machine && strncmp(machine, "MOT", 3) == 0) {
 316                 _chrp_type = _CHRP_Motorola;
 317         } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) {
 318                 _chrp_type = _CHRP_briq;
 319                 /* Map the SPOR register on briq and change the restart hook */
 320                 briq_SPOR = ioremap(0xff0000e8, 4);
 321                 ppc_md.restart = briq_restart;
 322         } else {
 323                 /* Let's assume it is an IBM chrp if all else fails */
 324                 _chrp_type = _CHRP_IBM;
 325         }
 326         of_node_put(root);
 327         printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
 328
 329         rtas_initialize();
 330         if (rtas_token("display-character") >= 0)
 331                 ppc_md.progress = rtas_progress;
 332
 333         /* use RTAS time-of-day routines if available */
 334         if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
 335                 ppc_md.get_boot_time    = rtas_get_boot_time;
 336                 ppc_md.get_rtc_time     = rtas_get_rtc_time;
 337                 ppc_md.set_rtc_time     = rtas_set_rtc_time;
 338         }
 339
 340         /* On pegasos, enable the L2 cache if not already done by OF */
 341         pegasos_set_l2cr();
 342
 343         /* Lookup PCI host bridges */
 344         chrp_find_bridges();
 345
 346         /*
 347          *  Temporary fixes for PCI devices.
 348          *  -- Geert
 349          */
 350         hydra_init();           /* Mac I/O */
 351
 352         /*
 353          *  Fix the Super I/O configuration
 354          */
 355         sio_init();
 356
 357         pci_create_OF_bus_map();
 358
 359         /*
 360          * Print the banner, then scroll down so boot progress
 361          * can be printed.  -- Cort
 362          */
 363         if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
 364 }
 365
 366 static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc)
 367 {
 368         struct irq_chip *chip = irq_desc_get_chip(desc);
 369         unsigned int cascade_irq = i8259_irq();
 370
 371         if (cascade_irq != NO_IRQ)
 372                 generic_handle_irq(cascade_irq);
 373
 374         chip->irq_eoi(&desc->irq_data);
 375 }
 376
 377 /*
 378  * Finds the open-pic node and sets up the mpic driver.
 379  */
 380 static void __init chrp_find_openpic(void)
 381 {
 382         struct device_node *np, *root;
 383         int len, i, j;
 384         int isu_size, idu_size;
 385         const unsigned int *iranges, *opprop = NULL;
 386         int oplen = 0;
 387         unsigned long opaddr;
 388         int na = 1;
 389
 390         np = of_find_node_by_type(NULL, "open-pic");
 391         if (np == NULL)
 392                 return;
 393         root = of_find_node_by_path("/");
 394         if (root) {
 395                 opprop = of_get_property(root, "platform-open-pic", &oplen);
 396                 na = of_n_addr_cells(root);
 397         }
 398         if (opprop && oplen >= na * sizeof(unsigned int)) {
 399                 opaddr = opprop[na-1];  /* assume 32-bit */
 400                 oplen /= na * sizeof(unsigned int);
 401         } else {
 402                 struct resource r;
 403                 if (of_address_to_resource(np, 0, &r)) {
 404                         goto bail;
 405                 }
 406                 opaddr = r.start;
 407                 oplen = 0;
 408         }
 409
 410         printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
 411
 412         iranges = of_get_property(np, "interrupt-ranges", &len);
 413         if (iranges == NULL)
 414                 len = 0;        /* non-distributed mpic */
 415         else
 416                 len /= 2 * sizeof(unsigned int);
 417
 418         /*
 419          * The first pair of cells in interrupt-ranges refers to the
 420          * IDU; subsequent pairs refer to the ISUs.
 421          */
 422         if (oplen < len) {
 423                 printk(KERN_ERR "Insufficient addresses for distributed"
 424                        " OpenPIC (%d < %d)\n", oplen, len);
 425                 len = oplen;
 426         }
 427
 428         isu_size = 0;
 429         idu_size = 0;
 430         if (len > 0 && iranges[1] != 0) {
 431                 printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
 432                        iranges[0], iranges[0] + iranges[1] - 1);
 433                 idu_size = iranges[1];
 434         }
 435         if (len > 1)
 436                 isu_size = iranges[3];
 437
 438         chrp_mpic = mpic_alloc(np, opaddr, 0, isu_size, 0, " MPIC    ");
 439         if (chrp_mpic == NULL) {
 440                 printk(KERN_ERR "Failed to allocate MPIC structure\n");
 441                 goto bail;
 442         }
 443         j = na - 1;
 444         for (i = 1; i < len; ++i) {
 445                 iranges += 2;
 446                 j += na;
 447                 printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
 448                        iranges[0], iranges[0] + iranges[1] - 1,
 449                        opprop[j]);
 450                 mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
 451         }
 452
 453         mpic_init(chrp_mpic);
 454         ppc_md.get_irq = mpic_get_irq;
 455  bail:
 456         of_node_put(root);
 457         of_node_put(np);
 458 }
 459
 460 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
 461 static struct irqaction xmon_irqaction = {
 462         .handler = xmon_irq,
 463         .name = "XMON break",
 464 };
 465 #endif
 466
 467 static void __init chrp_find_8259(void)
 468 {
 469         struct device_node *np, *pic = NULL;
 470         unsigned long chrp_int_ack = 0;
 471         unsigned int cascade_irq;
 472
 473         /* Look for cascade */
 474         for_each_node_by_type(np, "interrupt-controller")
 475                 if (of_device_is_compatible(np, "chrp,iic")) {
 476                         pic = np;
 477                         break;
 478                 }
 479         /* Ok, 8259 wasn't found. We need to handle the case where
 480          * we have a pegasos that claims to be chrp but doesn't have
 481          * a proper interrupt tree
 482          */
 483         if (pic == NULL && chrp_mpic != NULL) {
 484                 printk(KERN_ERR "i8259: Not found in device-tree"
 485                        " assuming no legacy interrupts\n");
 486                 return;
 487         }
 488
 489         /* Look for intack. In a perfect world, we would look for it on
 490          * the ISA bus that holds the 8259 but heh... Works that way. If
 491          * we ever see a problem, we can try to re-use the pSeries code here.
 492          * Also, Pegasos-type platforms don't have a proper node to start
 493          * from anyway
 494          */
 495         for_each_node_by_name(np, "pci") {
 496                 const unsigned int *addrp = of_get_property(np,
 497                                 "8259-interrupt-acknowledge", NULL);
 498
 499                 if (addrp == NULL)
 500                         continue;
 501                 chrp_int_ack = addrp[of_n_addr_cells(np)-1];
 502                 break;
 503         }
 504         of_node_put(np);
 505         if (np == NULL)
 506                 printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
 507                        " address, polling\n");
 508
 509         i8259_init(pic, chrp_int_ack);
 510         if (ppc_md.get_irq == NULL) {
 511                 ppc_md.get_irq = i8259_irq;
 512                 irq_set_default_host(i8259_get_host());
 513         }
 514         if (chrp_mpic != NULL) {
 515                 cascade_irq = irq_of_parse_and_map(pic, 0);
 516                 if (cascade_irq == NO_IRQ)
 517                         printk(KERN_ERR "i8259: failed to map cascade irq\n");
 518                 else
 519                         irq_set_chained_handler(cascade_irq,
 520                                                 chrp_8259_cascade);
 521         }
 522 }
 523
 524 void __init chrp_init_IRQ(void)
 525 {
 526 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
 527         struct device_node *kbd;
 528 #endif
 529         chrp_find_openpic();
 530         chrp_find_8259();
 531
 532 #ifdef CONFIG_SMP
 533         /* Pegasos has no MPIC, those ops would make it crash. It might be an
 534          * option to move setting them to after we probe the PIC though
 535          */
 536         if (chrp_mpic != NULL)
 537                 smp_ops = &chrp_smp_ops;
 538 #endif /* CONFIG_SMP */
 539
 540         if (_chrp_type == _CHRP_Pegasos)
 541                 ppc_md.get_irq        = i8259_irq;
 542
 543 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
 544         /* see if there is a keyboard in the device tree
 545            with a parent of type "adb" */
 546         for_each_node_by_name(kbd, "keyboard")
 547                 if (kbd->parent && kbd->parent->type
 548                     && strcmp(kbd->parent->type, "adb") == 0)
 549                         break;
 550         of_node_put(kbd);
 551         if (kbd)
 552                 setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
 553 #endif
 554 }
 555
 556 void __init
 557 chrp_init2(void)
 558 {
 559 #ifdef CONFIG_NVRAM
 560         chrp_nvram_init();
 561 #endif
 562
 563         request_region(0x20,0x20,"pic1");
 564         request_region(0xa0,0x20,"pic2");
 565         request_region(0x00,0x20,"dma1");
 566         request_region(0x40,0x20,"timer");
 567         request_region(0x80,0x10,"dma page reg");
 568         request_region(0xc0,0x20,"dma2");
 569
 570         if (ppc_md.progress)
 571                 ppc_md.progress("  Have fun!    ", 0x7777);
 572 }
 573
 574 static int __init chrp_probe(void)
 575 {
 576         char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
 577                                           "device_type", NULL);
 578         if (dtype == NULL)
 579                 return 0;
 580         if (strcmp(dtype, "chrp"))
 581                 return 0;
 582
 583         ISA_DMA_THRESHOLD = ~0L;
 584         DMA_MODE_READ = 0x44;
 585         DMA_MODE_WRITE = 0x48;
 586
 587         return 1;
 588 }
 589
 590 define_machine(chrp) {
 591         .name                   = "CHRP",
 592         .probe                  = chrp_probe,
 593         .setup_arch             = chrp_setup_arch,
 594         .init                   = chrp_init2,
 595         .init_early             = chrp_init_early,
 596         .show_cpuinfo           = chrp_show_cpuinfo,
 597         .init_IRQ               = chrp_init_IRQ,
 598         .restart                = rtas_restart,
 599         .power_off              = rtas_power_off,
 600         .halt                   = rtas_halt,
 601         .time_init              = chrp_time_init,
 602         .set_rtc_time           = chrp_set_rtc_time,
 603         .get_rtc_time           = chrp_get_rtc_time,
 604         .calibrate_decr         = generic_calibrate_decr,
 605         .phys_mem_access_prot   = pci_phys_mem_access_prot,
 606 };