spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / arch / powerpc / platforms / pasemi / setup.c
blob98b7a7c1317600f33c75ed5969f5113b77231966
1 /*
2 * Copyright (C) 2006-2007 PA Semi, Inc
4 * Authors: Kip Walker, PA Semi
5 * Olof Johansson, PA Semi
7 * Maintained by: Olof Johansson <olof@lixom.net>
9 * Based on arch/powerpc/platforms/maple/setup.c
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 #include <linux/errno.h>
26 #include <linux/kernel.h>
27 #include <linux/delay.h>
28 #include <linux/console.h>
29 #include <linux/export.h>
30 #include <linux/pci.h>
31 #include <linux/of_platform.h>
32 #include <linux/gfp.h>
34 #include <asm/prom.h>
35 #include <asm/system.h>
36 #include <asm/iommu.h>
37 #include <asm/machdep.h>
38 #include <asm/mpic.h>
39 #include <asm/smp.h>
40 #include <asm/time.h>
41 #include <asm/mmu.h>
43 #include <pcmcia/ss.h>
44 #include <pcmcia/cistpl.h>
45 #include <pcmcia/ds.h>
47 #include "pasemi.h"
49 /* SDC reset register, must be pre-mapped at reset time */
50 static void __iomem *reset_reg;
52 /* Various error status registers, must be pre-mapped at MCE time */
54 #define MAX_MCE_REGS 32
55 struct mce_regs {
56 char *name;
57 void __iomem *addr;
60 static struct mce_regs mce_regs[MAX_MCE_REGS];
61 static int num_mce_regs;
62 static int nmi_virq = NO_IRQ;
65 static void pas_restart(char *cmd)
67 /* Need to put others cpu in hold loop so they're not sleeping */
68 smp_send_stop();
69 udelay(10000);
70 printk("Restarting...\n");
71 while (1)
72 out_le32(reset_reg, 0x6000000);
75 #ifdef CONFIG_SMP
76 static arch_spinlock_t timebase_lock;
77 static unsigned long timebase;
79 static void __devinit pas_give_timebase(void)
81 unsigned long flags;
83 local_irq_save(flags);
84 hard_irq_disable();
85 arch_spin_lock(&timebase_lock);
86 mtspr(SPRN_TBCTL, TBCTL_FREEZE);
87 isync();
88 timebase = get_tb();
89 arch_spin_unlock(&timebase_lock);
91 while (timebase)
92 barrier();
93 mtspr(SPRN_TBCTL, TBCTL_RESTART);
94 local_irq_restore(flags);
97 static void __devinit pas_take_timebase(void)
99 while (!timebase)
100 smp_rmb();
102 arch_spin_lock(&timebase_lock);
103 set_tb(timebase >> 32, timebase & 0xffffffff);
104 timebase = 0;
105 arch_spin_unlock(&timebase_lock);
108 struct smp_ops_t pas_smp_ops = {
109 .probe = smp_mpic_probe,
110 .message_pass = smp_mpic_message_pass,
111 .kick_cpu = smp_generic_kick_cpu,
112 .setup_cpu = smp_mpic_setup_cpu,
113 .give_timebase = pas_give_timebase,
114 .take_timebase = pas_take_timebase,
116 #endif /* CONFIG_SMP */
118 void __init pas_setup_arch(void)
120 #ifdef CONFIG_SMP
121 /* Setup SMP callback */
122 smp_ops = &pas_smp_ops;
123 #endif
124 /* Lookup PCI hosts */
125 pas_pci_init();
127 #ifdef CONFIG_DUMMY_CONSOLE
128 conswitchp = &dummy_con;
129 #endif
131 /* Remap SDC register for doing reset */
132 /* XXXOJN This should maybe come out of the device tree */
133 reset_reg = ioremap(0xfc101100, 4);
136 static int __init pas_setup_mce_regs(void)
138 struct pci_dev *dev;
139 int reg;
141 /* Remap various SoC status registers for use by the MCE handler */
143 reg = 0;
145 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL);
146 while (dev && reg < MAX_MCE_REGS) {
147 mce_regs[reg].name = kasprintf(GFP_KERNEL,
148 "mc%d_mcdebug_errsta", reg);
149 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730);
150 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev);
151 reg++;
154 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
155 if (dev && reg+4 < MAX_MCE_REGS) {
156 mce_regs[reg].name = "iobdbg_IntStatus1";
157 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438);
158 reg++;
159 mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg";
160 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454);
161 reg++;
162 mce_regs[reg].name = "iobiom_IntStatus";
163 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10);
164 reg++;
165 mce_regs[reg].name = "iobiom_IntDbgReg";
166 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c);
167 reg++;
170 dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL);
171 if (dev && reg+2 < MAX_MCE_REGS) {
172 mce_regs[reg].name = "l2csts_IntStatus";
173 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200);
174 reg++;
175 mce_regs[reg].name = "l2csts_Cnt";
176 mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214);
177 reg++;
180 num_mce_regs = reg;
182 return 0;
184 machine_device_initcall(pasemi, pas_setup_mce_regs);
186 static __init void pas_init_IRQ(void)
188 struct device_node *np;
189 struct device_node *root, *mpic_node;
190 unsigned long openpic_addr;
191 const unsigned int *opprop;
192 int naddr, opplen;
193 int mpic_flags;
194 const unsigned int *nmiprop;
195 struct mpic *mpic;
197 mpic_node = NULL;
199 for_each_node_by_type(np, "interrupt-controller")
200 if (of_device_is_compatible(np, "open-pic")) {
201 mpic_node = np;
202 break;
204 if (!mpic_node)
205 for_each_node_by_type(np, "open-pic") {
206 mpic_node = np;
207 break;
209 if (!mpic_node) {
210 printk(KERN_ERR
211 "Failed to locate the MPIC interrupt controller\n");
212 return;
215 /* Find address list in /platform-open-pic */
216 root = of_find_node_by_path("/");
217 naddr = of_n_addr_cells(root);
218 opprop = of_get_property(root, "platform-open-pic", &opplen);
219 if (!opprop) {
220 printk(KERN_ERR "No platform-open-pic property.\n");
221 of_node_put(root);
222 return;
224 openpic_addr = of_read_number(opprop, naddr);
225 printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
227 mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
229 nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
230 if (nmiprop)
231 mpic_flags |= MPIC_ENABLE_MCK;
233 mpic = mpic_alloc(mpic_node, openpic_addr,
234 mpic_flags, 0, 0, "PASEMI-OPIC");
235 BUG_ON(!mpic);
237 mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
238 mpic_init(mpic);
239 /* The NMI/MCK source needs to be prio 15 */
240 if (nmiprop) {
241 nmi_virq = irq_create_mapping(NULL, *nmiprop);
242 mpic_irq_set_priority(nmi_virq, 15);
243 irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING);
244 mpic_unmask_irq(irq_get_irq_data(nmi_virq));
247 of_node_put(mpic_node);
248 of_node_put(root);
251 static void __init pas_progress(char *s, unsigned short hex)
253 printk("[%04x] : %s\n", hex, s ? s : "");
257 static int pas_machine_check_handler(struct pt_regs *regs)
259 int cpu = smp_processor_id();
260 unsigned long srr0, srr1, dsisr;
261 int dump_slb = 0;
262 int i;
264 srr0 = regs->nip;
265 srr1 = regs->msr;
267 if (nmi_virq != NO_IRQ && mpic_get_mcirq() == nmi_virq) {
268 printk(KERN_ERR "NMI delivered\n");
269 debugger(regs);
270 mpic_end_irq(irq_get_irq_data(nmi_virq));
271 goto out;
274 dsisr = mfspr(SPRN_DSISR);
275 printk(KERN_ERR "Machine Check on CPU %d\n", cpu);
276 printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1);
277 printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar);
278 printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER),
279 mfspr(SPRN_PA6T_MER));
280 printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER),
281 mfspr(SPRN_PA6T_DER));
282 printk(KERN_ERR "Cause:\n");
284 if (srr1 & 0x200000)
285 printk(KERN_ERR "Signalled by SDC\n");
287 if (srr1 & 0x100000) {
288 printk(KERN_ERR "Load/Store detected error:\n");
289 if (dsisr & 0x8000)
290 printk(KERN_ERR "D-cache ECC double-bit error or bus error\n");
291 if (dsisr & 0x4000)
292 printk(KERN_ERR "LSU snoop response error\n");
293 if (dsisr & 0x2000) {
294 printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n");
295 dump_slb = 1;
297 if (dsisr & 0x1000)
298 printk(KERN_ERR "Recoverable Duptags\n");
299 if (dsisr & 0x800)
300 printk(KERN_ERR "Recoverable D-cache parity error count overflow\n");
301 if (dsisr & 0x400)
302 printk(KERN_ERR "TLB parity error count overflow\n");
305 if (srr1 & 0x80000)
306 printk(KERN_ERR "Bus Error\n");
308 if (srr1 & 0x40000) {
309 printk(KERN_ERR "I-side SLB multiple hit\n");
310 dump_slb = 1;
313 if (srr1 & 0x20000)
314 printk(KERN_ERR "I-cache parity error hit\n");
316 if (num_mce_regs == 0)
317 printk(KERN_ERR "No MCE registers mapped yet, can't dump\n");
318 else
319 printk(KERN_ERR "SoC debug registers:\n");
321 for (i = 0; i < num_mce_regs; i++)
322 printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name,
323 in_le32(mce_regs[i].addr));
325 if (dump_slb) {
326 unsigned long e, v;
327 int i;
329 printk(KERN_ERR "slb contents:\n");
330 for (i = 0; i < mmu_slb_size; i++) {
331 asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i));
332 asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i));
333 printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v);
337 out:
338 /* SRR1[62] is from MSR[62] if recoverable, so pass that back */
339 return !!(srr1 & 0x2);
342 static void __init pas_init_early(void)
344 iommu_init_early_pasemi();
347 #ifdef CONFIG_PCMCIA
348 static int pcmcia_notify(struct notifier_block *nb, unsigned long action,
349 void *data)
351 struct device *dev = data;
352 struct device *parent;
353 struct pcmcia_device *pdev = to_pcmcia_dev(dev);
355 /* We are only intereted in device addition */
356 if (action != BUS_NOTIFY_ADD_DEVICE)
357 return 0;
359 parent = pdev->socket->dev.parent;
361 /* We know electra_cf devices will always have of_node set, since
362 * electra_cf is an of_platform driver.
364 if (!parent->of_node)
365 return 0;
367 if (!of_device_is_compatible(parent->of_node, "electra-cf"))
368 return 0;
370 /* We use the direct ops for localbus */
371 dev->archdata.dma_ops = &dma_direct_ops;
373 return 0;
376 static struct notifier_block pcmcia_notifier = {
377 .notifier_call = pcmcia_notify,
380 static inline void pasemi_pcmcia_init(void)
382 extern struct bus_type pcmcia_bus_type;
384 bus_register_notifier(&pcmcia_bus_type, &pcmcia_notifier);
387 #else
389 static inline void pasemi_pcmcia_init(void)
393 #endif
396 static struct of_device_id pasemi_bus_ids[] = {
397 /* Unfortunately needed for legacy firmwares */
398 { .type = "localbus", },
399 { .type = "sdc", },
400 /* These are the proper entries, which newer firmware uses */
401 { .compatible = "pasemi,localbus", },
402 { .compatible = "pasemi,sdc", },
406 static int __init pasemi_publish_devices(void)
408 pasemi_pcmcia_init();
410 /* Publish OF platform devices for SDC and other non-PCI devices */
411 of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
413 return 0;
415 machine_device_initcall(pasemi, pasemi_publish_devices);
419 * Called very early, MMU is off, device-tree isn't unflattened
421 static int __init pas_probe(void)
423 unsigned long root = of_get_flat_dt_root();
425 if (!of_flat_dt_is_compatible(root, "PA6T-1682M") &&
426 !of_flat_dt_is_compatible(root, "pasemi,pwrficient"))
427 return 0;
429 hpte_init_native();
431 alloc_iobmap_l2();
433 return 1;
436 define_machine(pasemi) {
437 .name = "PA Semi PWRficient",
438 .probe = pas_probe,
439 .setup_arch = pas_setup_arch,
440 .init_early = pas_init_early,
441 .init_IRQ = pas_init_IRQ,
442 .get_irq = mpic_get_irq,
443 .restart = pas_restart,
444 .get_boot_time = pas_get_boot_time,
445 .calibrate_decr = generic_calibrate_decr,
446 .progress = pas_progress,
447 .machine_check_exception = pas_machine_check_handler,