2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/pci.h>
29 #include <linux/mc146818rtc.h>
30 #include <linux/compiler.h>
31 #include <linux/acpi.h>
32 #include <linux/module.h>
33 #include <linux/syscore_ops.h>
34 #include <linux/msi.h>
35 #include <linux/htirq.h>
36 #include <linux/freezer.h>
37 #include <linux/kthread.h>
38 #include <linux/jiffies.h> /* time_after() */
39 #include <linux/slab.h>
41 #include <acpi/acpi_bus.h>
43 #include <linux/bootmem.h>
44 #include <linux/dmar.h>
45 #include <linux/hpet.h>
52 #include <asm/proto.h>
55 #include <asm/timer.h>
56 #include <asm/i8259.h>
57 #include <asm/msidef.h>
58 #include <asm/hypertransport.h>
59 #include <asm/setup.h>
60 #include <asm/irq_remapping.h>
62 #include <asm/hw_irq.h>
66 #define __apicdebuginit(type) static type __init
67 #define for_each_irq_pin(entry, head) \
68 for (entry = head; entry; entry = entry->next)
71 * Is the SiS APIC rmw bug present ?
72 * -1 = don't know, 0 = no, 1 = yes
74 int sis_apic_bug
= -1;
76 static DEFINE_RAW_SPINLOCK(ioapic_lock
);
77 static DEFINE_RAW_SPINLOCK(vector_lock
);
79 static struct ioapic
{
81 * # of IRQ routing registers
85 * Saved state during suspend/resume, or while enabling intr-remap.
87 struct IO_APIC_route_entry
*saved_registers
;
89 struct mpc_ioapic mp_config
;
90 /* IO APIC gsi routing info */
91 struct mp_ioapic_gsi gsi_config
;
92 DECLARE_BITMAP(pin_programmed
, MP_MAX_IOAPIC_PIN
+ 1);
93 } ioapics
[MAX_IO_APICS
];
95 #define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver
97 int mpc_ioapic_id(int ioapic_idx
)
99 return ioapics
[ioapic_idx
].mp_config
.apicid
;
102 unsigned int mpc_ioapic_addr(int ioapic_idx
)
104 return ioapics
[ioapic_idx
].mp_config
.apicaddr
;
107 struct mp_ioapic_gsi
*mp_ioapic_gsi_routing(int ioapic_idx
)
109 return &ioapics
[ioapic_idx
].gsi_config
;
114 /* The one past the highest gsi number used */
117 /* MP IRQ source entries */
118 struct mpc_intsrc mp_irqs
[MAX_IRQ_SOURCES
];
120 /* # of MP IRQ source entries */
124 static int nr_irqs_gsi
= NR_IRQS_LEGACY
;
126 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
127 int mp_bus_id_to_type
[MAX_MP_BUSSES
];
130 DECLARE_BITMAP(mp_bus_not_pci
, MAX_MP_BUSSES
);
132 int skip_ioapic_setup
;
135 * disable_ioapic_support() - disables ioapic support at runtime
137 void disable_ioapic_support(void)
141 noioapicreroute
= -1;
143 skip_ioapic_setup
= 1;
146 static int __init
parse_noapic(char *str
)
148 /* disable IO-APIC */
149 disable_ioapic_support();
152 early_param("noapic", parse_noapic
);
154 static int io_apic_setup_irq_pin(unsigned int irq
, int node
,
155 struct io_apic_irq_attr
*attr
);
157 /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
158 void mp_save_irq(struct mpc_intsrc
*m
)
162 apic_printk(APIC_VERBOSE
, "Int: type %d, pol %d, trig %d, bus %02x,"
163 " IRQ %02x, APIC ID %x, APIC INT %02x\n",
164 m
->irqtype
, m
->irqflag
& 3, (m
->irqflag
>> 2) & 3, m
->srcbus
,
165 m
->srcbusirq
, m
->dstapic
, m
->dstirq
);
167 for (i
= 0; i
< mp_irq_entries
; i
++) {
168 if (!memcmp(&mp_irqs
[i
], m
, sizeof(*m
)))
172 memcpy(&mp_irqs
[mp_irq_entries
], m
, sizeof(*m
));
173 if (++mp_irq_entries
== MAX_IRQ_SOURCES
)
174 panic("Max # of irq sources exceeded!!\n");
177 struct irq_pin_list
{
179 struct irq_pin_list
*next
;
182 static struct irq_pin_list
*alloc_irq_pin_list(int node
)
184 return kzalloc_node(sizeof(struct irq_pin_list
), GFP_KERNEL
, node
);
188 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
189 static struct irq_cfg irq_cfgx
[NR_IRQS_LEGACY
];
191 int __init
arch_early_irq_init(void)
196 if (!legacy_pic
->nr_legacy_irqs
)
199 for (i
= 0; i
< nr_ioapics
; i
++) {
200 ioapics
[i
].saved_registers
=
201 kzalloc(sizeof(struct IO_APIC_route_entry
) *
202 ioapics
[i
].nr_registers
, GFP_KERNEL
);
203 if (!ioapics
[i
].saved_registers
)
204 pr_err("IOAPIC %d: suspend/resume impossible!\n", i
);
208 count
= ARRAY_SIZE(irq_cfgx
);
209 node
= cpu_to_node(0);
211 /* Make sure the legacy interrupts are marked in the bitmap */
212 irq_reserve_irqs(0, legacy_pic
->nr_legacy_irqs
);
214 for (i
= 0; i
< count
; i
++) {
215 irq_set_chip_data(i
, &cfg
[i
]);
216 zalloc_cpumask_var_node(&cfg
[i
].domain
, GFP_KERNEL
, node
);
217 zalloc_cpumask_var_node(&cfg
[i
].old_domain
, GFP_KERNEL
, node
);
219 * For legacy IRQ's, start with assigning irq0 to irq15 to
220 * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0.
222 if (i
< legacy_pic
->nr_legacy_irqs
) {
223 cfg
[i
].vector
= IRQ0_VECTOR
+ i
;
224 cpumask_set_cpu(0, cfg
[i
].domain
);
231 static struct irq_cfg
*irq_cfg(unsigned int irq
)
233 return irq_get_chip_data(irq
);
236 static struct irq_cfg
*alloc_irq_cfg(unsigned int irq
, int node
)
240 cfg
= kzalloc_node(sizeof(*cfg
), GFP_KERNEL
, node
);
243 if (!zalloc_cpumask_var_node(&cfg
->domain
, GFP_KERNEL
, node
))
245 if (!zalloc_cpumask_var_node(&cfg
->old_domain
, GFP_KERNEL
, node
))
249 free_cpumask_var(cfg
->domain
);
255 static void free_irq_cfg(unsigned int at
, struct irq_cfg
*cfg
)
259 irq_set_chip_data(at
, NULL
);
260 free_cpumask_var(cfg
->domain
);
261 free_cpumask_var(cfg
->old_domain
);
265 static struct irq_cfg
*alloc_irq_and_cfg_at(unsigned int at
, int node
)
267 int res
= irq_alloc_desc_at(at
, node
);
273 cfg
= irq_get_chip_data(at
);
278 cfg
= alloc_irq_cfg(at
, node
);
280 irq_set_chip_data(at
, cfg
);
286 static int alloc_irq_from(unsigned int from
, int node
)
288 return irq_alloc_desc_from(from
, node
);
291 static void free_irq_at(unsigned int at
, struct irq_cfg
*cfg
)
293 free_irq_cfg(at
, cfg
);
299 unsigned int unused
[3];
301 unsigned int unused2
[11];
305 static __attribute_const__
struct io_apic __iomem
*io_apic_base(int idx
)
307 return (void __iomem
*) __fix_to_virt(FIX_IO_APIC_BASE_0
+ idx
)
308 + (mpc_ioapic_addr(idx
) & ~PAGE_MASK
);
311 static inline void io_apic_eoi(unsigned int apic
, unsigned int vector
)
313 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
314 writel(vector
, &io_apic
->eoi
);
317 static inline unsigned int io_apic_read(unsigned int apic
, unsigned int reg
)
319 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
320 writel(reg
, &io_apic
->index
);
321 return readl(&io_apic
->data
);
324 static inline void io_apic_write(unsigned int apic
, unsigned int reg
, unsigned int value
)
326 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
327 writel(reg
, &io_apic
->index
);
328 writel(value
, &io_apic
->data
);
332 * Re-write a value: to be used for read-modify-write
333 * cycles where the read already set up the index register.
335 * Older SiS APIC requires we rewrite the index register
337 static inline void io_apic_modify(unsigned int apic
, unsigned int reg
, unsigned int value
)
339 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
342 writel(reg
, &io_apic
->index
);
343 writel(value
, &io_apic
->data
);
346 static bool io_apic_level_ack_pending(struct irq_cfg
*cfg
)
348 struct irq_pin_list
*entry
;
351 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
352 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
357 reg
= io_apic_read(entry
->apic
, 0x10 + pin
*2);
358 /* Is the remote IRR bit set? */
359 if (reg
& IO_APIC_REDIR_REMOTE_IRR
) {
360 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
364 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
370 struct { u32 w1
, w2
; };
371 struct IO_APIC_route_entry entry
;
374 static struct IO_APIC_route_entry
__ioapic_read_entry(int apic
, int pin
)
376 union entry_union eu
;
378 eu
.w1
= io_apic_read(apic
, 0x10 + 2 * pin
);
379 eu
.w2
= io_apic_read(apic
, 0x11 + 2 * pin
);
383 static struct IO_APIC_route_entry
ioapic_read_entry(int apic
, int pin
)
385 union entry_union eu
;
387 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
388 eu
.entry
= __ioapic_read_entry(apic
, pin
);
389 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
394 * When we write a new IO APIC routing entry, we need to write the high
395 * word first! If the mask bit in the low word is clear, we will enable
396 * the interrupt, and we need to make sure the entry is fully populated
397 * before that happens.
400 __ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
402 union entry_union eu
= {{0, 0}};
405 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
406 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
409 static void ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
412 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
413 __ioapic_write_entry(apic
, pin
, e
);
414 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
418 * When we mask an IO APIC routing entry, we need to write the low
419 * word first, in order to set the mask bit before we change the
422 static void ioapic_mask_entry(int apic
, int pin
)
425 union entry_union eu
= { .entry
.mask
= 1 };
427 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
428 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
429 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
430 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
434 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
435 * shared ISA-space IRQs, so we have to support them. We are super
436 * fast in the common case, and fast for shared ISA-space IRQs.
439 __add_pin_to_irq_node(struct irq_cfg
*cfg
, int node
, int apic
, int pin
)
441 struct irq_pin_list
**last
, *entry
;
443 /* don't allow duplicates */
444 last
= &cfg
->irq_2_pin
;
445 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
446 if (entry
->apic
== apic
&& entry
->pin
== pin
)
451 entry
= alloc_irq_pin_list(node
);
453 printk(KERN_ERR
"can not alloc irq_pin_list (%d,%d,%d)\n",
464 static void add_pin_to_irq_node(struct irq_cfg
*cfg
, int node
, int apic
, int pin
)
466 if (__add_pin_to_irq_node(cfg
, node
, apic
, pin
))
467 panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
471 * Reroute an IRQ to a different pin.
473 static void __init
replace_pin_at_irq_node(struct irq_cfg
*cfg
, int node
,
474 int oldapic
, int oldpin
,
475 int newapic
, int newpin
)
477 struct irq_pin_list
*entry
;
479 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
480 if (entry
->apic
== oldapic
&& entry
->pin
== oldpin
) {
481 entry
->apic
= newapic
;
483 /* every one is different, right? */
488 /* old apic/pin didn't exist, so just add new ones */
489 add_pin_to_irq_node(cfg
, node
, newapic
, newpin
);
492 static void __io_apic_modify_irq(struct irq_pin_list
*entry
,
493 int mask_and
, int mask_or
,
494 void (*final
)(struct irq_pin_list
*entry
))
496 unsigned int reg
, pin
;
499 reg
= io_apic_read(entry
->apic
, 0x10 + pin
* 2);
502 io_apic_modify(entry
->apic
, 0x10 + pin
* 2, reg
);
507 static void io_apic_modify_irq(struct irq_cfg
*cfg
,
508 int mask_and
, int mask_or
,
509 void (*final
)(struct irq_pin_list
*entry
))
511 struct irq_pin_list
*entry
;
513 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
514 __io_apic_modify_irq(entry
, mask_and
, mask_or
, final
);
517 static void io_apic_sync(struct irq_pin_list
*entry
)
520 * Synchronize the IO-APIC and the CPU by doing
521 * a dummy read from the IO-APIC
523 struct io_apic __iomem
*io_apic
;
524 io_apic
= io_apic_base(entry
->apic
);
525 readl(&io_apic
->data
);
528 static void mask_ioapic(struct irq_cfg
*cfg
)
532 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
533 io_apic_modify_irq(cfg
, ~0, IO_APIC_REDIR_MASKED
, &io_apic_sync
);
534 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
537 static void mask_ioapic_irq(struct irq_data
*data
)
539 mask_ioapic(data
->chip_data
);
542 static void __unmask_ioapic(struct irq_cfg
*cfg
)
544 io_apic_modify_irq(cfg
, ~IO_APIC_REDIR_MASKED
, 0, NULL
);
547 static void unmask_ioapic(struct irq_cfg
*cfg
)
551 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
552 __unmask_ioapic(cfg
);
553 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
556 static void unmask_ioapic_irq(struct irq_data
*data
)
558 unmask_ioapic(data
->chip_data
);
562 * IO-APIC versions below 0x20 don't support EOI register.
563 * For the record, here is the information about various versions:
565 * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant
566 * 2Xh I/O(x)APIC which is PCI 2.2 Compliant
569 * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
570 * version as 0x2. This is an error with documentation and these ICH chips
571 * use io-apic's of version 0x20.
573 * For IO-APIC's with EOI register, we use that to do an explicit EOI.
574 * Otherwise, we simulate the EOI message manually by changing the trigger
575 * mode to edge and then back to level, with RTE being masked during this.
577 static void __eoi_ioapic_pin(int apic
, int pin
, int vector
, struct irq_cfg
*cfg
)
579 if (mpc_ioapic_ver(apic
) >= 0x20) {
581 * Intr-remapping uses pin number as the virtual vector
582 * in the RTE. Actual vector is programmed in
583 * intr-remapping table entry. Hence for the io-apic
584 * EOI we use the pin number.
586 if (cfg
&& irq_remapped(cfg
))
587 io_apic_eoi(apic
, pin
);
589 io_apic_eoi(apic
, vector
);
591 struct IO_APIC_route_entry entry
, entry1
;
593 entry
= entry1
= __ioapic_read_entry(apic
, pin
);
596 * Mask the entry and change the trigger mode to edge.
599 entry1
.trigger
= IOAPIC_EDGE
;
601 __ioapic_write_entry(apic
, pin
, entry1
);
604 * Restore the previous level triggered entry.
606 __ioapic_write_entry(apic
, pin
, entry
);
610 static void eoi_ioapic_irq(unsigned int irq
, struct irq_cfg
*cfg
)
612 struct irq_pin_list
*entry
;
615 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
616 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
617 __eoi_ioapic_pin(entry
->apic
, entry
->pin
, cfg
->vector
, cfg
);
618 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
621 static void clear_IO_APIC_pin(unsigned int apic
, unsigned int pin
)
623 struct IO_APIC_route_entry entry
;
625 /* Check delivery_mode to be sure we're not clearing an SMI pin */
626 entry
= ioapic_read_entry(apic
, pin
);
627 if (entry
.delivery_mode
== dest_SMI
)
631 * Make sure the entry is masked and re-read the contents to check
632 * if it is a level triggered pin and if the remote-IRR is set.
636 ioapic_write_entry(apic
, pin
, entry
);
637 entry
= ioapic_read_entry(apic
, pin
);
644 * Make sure the trigger mode is set to level. Explicit EOI
645 * doesn't clear the remote-IRR if the trigger mode is not
648 if (!entry
.trigger
) {
649 entry
.trigger
= IOAPIC_LEVEL
;
650 ioapic_write_entry(apic
, pin
, entry
);
653 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
654 __eoi_ioapic_pin(apic
, pin
, entry
.vector
, NULL
);
655 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
659 * Clear the rest of the bits in the IO-APIC RTE except for the mask
662 ioapic_mask_entry(apic
, pin
);
663 entry
= ioapic_read_entry(apic
, pin
);
665 printk(KERN_ERR
"Unable to reset IRR for apic: %d, pin :%d\n",
666 mpc_ioapic_id(apic
), pin
);
669 static void clear_IO_APIC (void)
673 for (apic
= 0; apic
< nr_ioapics
; apic
++)
674 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++)
675 clear_IO_APIC_pin(apic
, pin
);
680 * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
681 * specific CPU-side IRQs.
685 static int pirq_entries
[MAX_PIRQS
] = {
686 [0 ... MAX_PIRQS
- 1] = -1
689 static int __init
ioapic_pirq_setup(char *str
)
692 int ints
[MAX_PIRQS
+1];
694 get_options(str
, ARRAY_SIZE(ints
), ints
);
696 apic_printk(APIC_VERBOSE
, KERN_INFO
697 "PIRQ redirection, working around broken MP-BIOS.\n");
699 if (ints
[0] < MAX_PIRQS
)
702 for (i
= 0; i
< max
; i
++) {
703 apic_printk(APIC_VERBOSE
, KERN_DEBUG
704 "... PIRQ%d -> IRQ %d\n", i
, ints
[i
+1]);
706 * PIRQs are mapped upside down, usually.
708 pirq_entries
[MAX_PIRQS
-i
-1] = ints
[i
+1];
713 __setup("pirq=", ioapic_pirq_setup
);
714 #endif /* CONFIG_X86_32 */
717 * Saves all the IO-APIC RTE's
719 int save_ioapic_entries(void)
724 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
725 if (!ioapics
[apic
].saved_registers
) {
730 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++)
731 ioapics
[apic
].saved_registers
[pin
] =
732 ioapic_read_entry(apic
, pin
);
739 * Mask all IO APIC entries.
741 void mask_ioapic_entries(void)
745 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
746 if (!ioapics
[apic
].saved_registers
)
749 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++) {
750 struct IO_APIC_route_entry entry
;
752 entry
= ioapics
[apic
].saved_registers
[pin
];
755 ioapic_write_entry(apic
, pin
, entry
);
762 * Restore IO APIC entries which was saved in the ioapic structure.
764 int restore_ioapic_entries(void)
768 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
769 if (!ioapics
[apic
].saved_registers
)
772 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++)
773 ioapic_write_entry(apic
, pin
,
774 ioapics
[apic
].saved_registers
[pin
]);
780 * Find the IRQ entry number of a certain pin.
782 static int find_irq_entry(int ioapic_idx
, int pin
, int type
)
786 for (i
= 0; i
< mp_irq_entries
; i
++)
787 if (mp_irqs
[i
].irqtype
== type
&&
788 (mp_irqs
[i
].dstapic
== mpc_ioapic_id(ioapic_idx
) ||
789 mp_irqs
[i
].dstapic
== MP_APIC_ALL
) &&
790 mp_irqs
[i
].dstirq
== pin
)
797 * Find the pin to which IRQ[irq] (ISA) is connected
799 static int __init
find_isa_irq_pin(int irq
, int type
)
803 for (i
= 0; i
< mp_irq_entries
; i
++) {
804 int lbus
= mp_irqs
[i
].srcbus
;
806 if (test_bit(lbus
, mp_bus_not_pci
) &&
807 (mp_irqs
[i
].irqtype
== type
) &&
808 (mp_irqs
[i
].srcbusirq
== irq
))
810 return mp_irqs
[i
].dstirq
;
815 static int __init
find_isa_irq_apic(int irq
, int type
)
819 for (i
= 0; i
< mp_irq_entries
; i
++) {
820 int lbus
= mp_irqs
[i
].srcbus
;
822 if (test_bit(lbus
, mp_bus_not_pci
) &&
823 (mp_irqs
[i
].irqtype
== type
) &&
824 (mp_irqs
[i
].srcbusirq
== irq
))
828 if (i
< mp_irq_entries
) {
831 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
832 if (mpc_ioapic_id(ioapic_idx
) == mp_irqs
[i
].dstapic
)
839 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
841 * EISA Edge/Level control register, ELCR
843 static int EISA_ELCR(unsigned int irq
)
845 if (irq
< legacy_pic
->nr_legacy_irqs
) {
846 unsigned int port
= 0x4d0 + (irq
>> 3);
847 return (inb(port
) >> (irq
& 7)) & 1;
849 apic_printk(APIC_VERBOSE
, KERN_INFO
850 "Broken MPtable reports ISA irq %d\n", irq
);
856 /* ISA interrupts are always polarity zero edge triggered,
857 * when listed as conforming in the MP table. */
859 #define default_ISA_trigger(idx) (0)
860 #define default_ISA_polarity(idx) (0)
862 /* EISA interrupts are always polarity zero and can be edge or level
863 * trigger depending on the ELCR value. If an interrupt is listed as
864 * EISA conforming in the MP table, that means its trigger type must
865 * be read in from the ELCR */
867 #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq))
868 #define default_EISA_polarity(idx) default_ISA_polarity(idx)
870 /* PCI interrupts are always polarity one level triggered,
871 * when listed as conforming in the MP table. */
873 #define default_PCI_trigger(idx) (1)
874 #define default_PCI_polarity(idx) (1)
876 /* MCA interrupts are always polarity zero level triggered,
877 * when listed as conforming in the MP table. */
879 #define default_MCA_trigger(idx) (1)
880 #define default_MCA_polarity(idx) default_ISA_polarity(idx)
882 static int irq_polarity(int idx
)
884 int bus
= mp_irqs
[idx
].srcbus
;
888 * Determine IRQ line polarity (high active or low active):
890 switch (mp_irqs
[idx
].irqflag
& 3)
892 case 0: /* conforms, ie. bus-type dependent polarity */
893 if (test_bit(bus
, mp_bus_not_pci
))
894 polarity
= default_ISA_polarity(idx
);
896 polarity
= default_PCI_polarity(idx
);
898 case 1: /* high active */
903 case 2: /* reserved */
905 printk(KERN_WARNING
"broken BIOS!!\n");
909 case 3: /* low active */
914 default: /* invalid */
916 printk(KERN_WARNING
"broken BIOS!!\n");
924 static int irq_trigger(int idx
)
926 int bus
= mp_irqs
[idx
].srcbus
;
930 * Determine IRQ trigger mode (edge or level sensitive):
932 switch ((mp_irqs
[idx
].irqflag
>>2) & 3)
934 case 0: /* conforms, ie. bus-type dependent */
935 if (test_bit(bus
, mp_bus_not_pci
))
936 trigger
= default_ISA_trigger(idx
);
938 trigger
= default_PCI_trigger(idx
);
939 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
940 switch (mp_bus_id_to_type
[bus
]) {
941 case MP_BUS_ISA
: /* ISA pin */
943 /* set before the switch */
946 case MP_BUS_EISA
: /* EISA pin */
948 trigger
= default_EISA_trigger(idx
);
951 case MP_BUS_PCI
: /* PCI pin */
953 /* set before the switch */
956 case MP_BUS_MCA
: /* MCA pin */
958 trigger
= default_MCA_trigger(idx
);
963 printk(KERN_WARNING
"broken BIOS!!\n");
975 case 2: /* reserved */
977 printk(KERN_WARNING
"broken BIOS!!\n");
986 default: /* invalid */
988 printk(KERN_WARNING
"broken BIOS!!\n");
996 static int pin_2_irq(int idx
, int apic
, int pin
)
999 int bus
= mp_irqs
[idx
].srcbus
;
1000 struct mp_ioapic_gsi
*gsi_cfg
= mp_ioapic_gsi_routing(apic
);
1003 * Debugging check, we are in big trouble if this message pops up!
1005 if (mp_irqs
[idx
].dstirq
!= pin
)
1006 printk(KERN_ERR
"broken BIOS or MPTABLE parser, ayiee!!\n");
1008 if (test_bit(bus
, mp_bus_not_pci
)) {
1009 irq
= mp_irqs
[idx
].srcbusirq
;
1011 u32 gsi
= gsi_cfg
->gsi_base
+ pin
;
1013 if (gsi
>= NR_IRQS_LEGACY
)
1016 irq
= gsi_top
+ gsi
;
1019 #ifdef CONFIG_X86_32
1021 * PCI IRQ command line redirection. Yes, limits are hardcoded.
1023 if ((pin
>= 16) && (pin
<= 23)) {
1024 if (pirq_entries
[pin
-16] != -1) {
1025 if (!pirq_entries
[pin
-16]) {
1026 apic_printk(APIC_VERBOSE
, KERN_DEBUG
1027 "disabling PIRQ%d\n", pin
-16);
1029 irq
= pirq_entries
[pin
-16];
1030 apic_printk(APIC_VERBOSE
, KERN_DEBUG
1031 "using PIRQ%d -> IRQ %d\n",
1042 * Find a specific PCI IRQ entry.
1043 * Not an __init, possibly needed by modules
1045 int IO_APIC_get_PCI_irq_vector(int bus
, int slot
, int pin
,
1046 struct io_apic_irq_attr
*irq_attr
)
1048 int ioapic_idx
, i
, best_guess
= -1;
1050 apic_printk(APIC_DEBUG
,
1051 "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
1053 if (test_bit(bus
, mp_bus_not_pci
)) {
1054 apic_printk(APIC_VERBOSE
,
1055 "PCI BIOS passed nonexistent PCI bus %d!\n", bus
);
1058 for (i
= 0; i
< mp_irq_entries
; i
++) {
1059 int lbus
= mp_irqs
[i
].srcbus
;
1061 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1062 if (mpc_ioapic_id(ioapic_idx
) == mp_irqs
[i
].dstapic
||
1063 mp_irqs
[i
].dstapic
== MP_APIC_ALL
)
1066 if (!test_bit(lbus
, mp_bus_not_pci
) &&
1067 !mp_irqs
[i
].irqtype
&&
1069 (slot
== ((mp_irqs
[i
].srcbusirq
>> 2) & 0x1f))) {
1070 int irq
= pin_2_irq(i
, ioapic_idx
, mp_irqs
[i
].dstirq
);
1072 if (!(ioapic_idx
|| IO_APIC_IRQ(irq
)))
1075 if (pin
== (mp_irqs
[i
].srcbusirq
& 3)) {
1076 set_io_apic_irq_attr(irq_attr
, ioapic_idx
,
1083 * Use the first all-but-pin matching entry as a
1084 * best-guess fuzzy result for broken mptables.
1086 if (best_guess
< 0) {
1087 set_io_apic_irq_attr(irq_attr
, ioapic_idx
,
1097 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector
);
1099 void lock_vector_lock(void)
1101 /* Used to the online set of cpus does not change
1102 * during assign_irq_vector.
1104 raw_spin_lock(&vector_lock
);
1107 void unlock_vector_lock(void)
1109 raw_spin_unlock(&vector_lock
);
1113 __assign_irq_vector(int irq
, struct irq_cfg
*cfg
, const struct cpumask
*mask
)
1116 * NOTE! The local APIC isn't very good at handling
1117 * multiple interrupts at the same interrupt level.
1118 * As the interrupt level is determined by taking the
1119 * vector number and shifting that right by 4, we
1120 * want to spread these out a bit so that they don't
1121 * all fall in the same interrupt level.
1123 * Also, we've got to be careful not to trash gate
1124 * 0x80, because int 0x80 is hm, kind of importantish. ;)
1126 static int current_vector
= FIRST_EXTERNAL_VECTOR
+ VECTOR_OFFSET_START
;
1127 static int current_offset
= VECTOR_OFFSET_START
% 8;
1128 unsigned int old_vector
;
1130 cpumask_var_t tmp_mask
;
1132 if (cfg
->move_in_progress
)
1135 if (!alloc_cpumask_var(&tmp_mask
, GFP_ATOMIC
))
1138 old_vector
= cfg
->vector
;
1140 cpumask_and(tmp_mask
, mask
, cpu_online_mask
);
1141 cpumask_and(tmp_mask
, cfg
->domain
, tmp_mask
);
1142 if (!cpumask_empty(tmp_mask
)) {
1143 free_cpumask_var(tmp_mask
);
1148 /* Only try and allocate irqs on cpus that are present */
1150 for_each_cpu_and(cpu
, mask
, cpu_online_mask
) {
1154 apic
->vector_allocation_domain(cpu
, tmp_mask
);
1156 vector
= current_vector
;
1157 offset
= current_offset
;
1160 if (vector
>= first_system_vector
) {
1161 /* If out of vectors on large boxen, must share them. */
1162 offset
= (offset
+ 1) % 8;
1163 vector
= FIRST_EXTERNAL_VECTOR
+ offset
;
1165 if (unlikely(current_vector
== vector
))
1168 if (test_bit(vector
, used_vectors
))
1171 for_each_cpu_and(new_cpu
, tmp_mask
, cpu_online_mask
)
1172 if (per_cpu(vector_irq
, new_cpu
)[vector
] != -1)
1175 current_vector
= vector
;
1176 current_offset
= offset
;
1178 cfg
->move_in_progress
= 1;
1179 cpumask_copy(cfg
->old_domain
, cfg
->domain
);
1181 for_each_cpu_and(new_cpu
, tmp_mask
, cpu_online_mask
)
1182 per_cpu(vector_irq
, new_cpu
)[vector
] = irq
;
1183 cfg
->vector
= vector
;
1184 cpumask_copy(cfg
->domain
, tmp_mask
);
1188 free_cpumask_var(tmp_mask
);
1192 int assign_irq_vector(int irq
, struct irq_cfg
*cfg
, const struct cpumask
*mask
)
1195 unsigned long flags
;
1197 raw_spin_lock_irqsave(&vector_lock
, flags
);
1198 err
= __assign_irq_vector(irq
, cfg
, mask
);
1199 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
1203 static void __clear_irq_vector(int irq
, struct irq_cfg
*cfg
)
1207 BUG_ON(!cfg
->vector
);
1209 vector
= cfg
->vector
;
1210 for_each_cpu_and(cpu
, cfg
->domain
, cpu_online_mask
)
1211 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1214 cpumask_clear(cfg
->domain
);
1216 if (likely(!cfg
->move_in_progress
))
1218 for_each_cpu_and(cpu
, cfg
->old_domain
, cpu_online_mask
) {
1219 for (vector
= FIRST_EXTERNAL_VECTOR
; vector
< NR_VECTORS
;
1221 if (per_cpu(vector_irq
, cpu
)[vector
] != irq
)
1223 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1227 cfg
->move_in_progress
= 0;
1230 void __setup_vector_irq(int cpu
)
1232 /* Initialize vector_irq on a new cpu */
1234 struct irq_cfg
*cfg
;
1237 * vector_lock will make sure that we don't run into irq vector
1238 * assignments that might be happening on another cpu in parallel,
1239 * while we setup our initial vector to irq mappings.
1241 raw_spin_lock(&vector_lock
);
1242 /* Mark the inuse vectors */
1243 for_each_active_irq(irq
) {
1244 cfg
= irq_get_chip_data(irq
);
1248 * If it is a legacy IRQ handled by the legacy PIC, this cpu
1249 * will be part of the irq_cfg's domain.
1251 if (irq
< legacy_pic
->nr_legacy_irqs
&& !IO_APIC_IRQ(irq
))
1252 cpumask_set_cpu(cpu
, cfg
->domain
);
1254 if (!cpumask_test_cpu(cpu
, cfg
->domain
))
1256 vector
= cfg
->vector
;
1257 per_cpu(vector_irq
, cpu
)[vector
] = irq
;
1259 /* Mark the free vectors */
1260 for (vector
= 0; vector
< NR_VECTORS
; ++vector
) {
1261 irq
= per_cpu(vector_irq
, cpu
)[vector
];
1266 if (!cpumask_test_cpu(cpu
, cfg
->domain
))
1267 per_cpu(vector_irq
, cpu
)[vector
] = -1;
1269 raw_spin_unlock(&vector_lock
);
1272 static struct irq_chip ioapic_chip
;
1274 #ifdef CONFIG_X86_32
1275 static inline int IO_APIC_irq_trigger(int irq
)
1279 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
1280 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++) {
1281 idx
= find_irq_entry(apic
, pin
, mp_INT
);
1282 if ((idx
!= -1) && (irq
== pin_2_irq(idx
, apic
, pin
)))
1283 return irq_trigger(idx
);
1287 * nonexistent IRQs are edge default
1292 static inline int IO_APIC_irq_trigger(int irq
)
1298 static void ioapic_register_intr(unsigned int irq
, struct irq_cfg
*cfg
,
1299 unsigned long trigger
)
1301 struct irq_chip
*chip
= &ioapic_chip
;
1302 irq_flow_handler_t hdl
;
1305 if ((trigger
== IOAPIC_AUTO
&& IO_APIC_irq_trigger(irq
)) ||
1306 trigger
== IOAPIC_LEVEL
) {
1307 irq_set_status_flags(irq
, IRQ_LEVEL
);
1310 irq_clear_status_flags(irq
, IRQ_LEVEL
);
1314 if (irq_remapped(cfg
)) {
1315 irq_set_status_flags(irq
, IRQ_MOVE_PCNTXT
);
1316 irq_remap_modify_chip_defaults(chip
);
1317 fasteoi
= trigger
!= 0;
1320 hdl
= fasteoi
? handle_fasteoi_irq
: handle_edge_irq
;
1321 irq_set_chip_and_handler_name(irq
, chip
, hdl
,
1322 fasteoi
? "fasteoi" : "edge");
1326 static int setup_ir_ioapic_entry(int irq
,
1327 struct IR_IO_APIC_route_entry
*entry
,
1328 unsigned int destination
, int vector
,
1329 struct io_apic_irq_attr
*attr
)
1333 int ioapic_id
= mpc_ioapic_id(attr
->ioapic
);
1334 struct intel_iommu
*iommu
= map_ioapic_to_ir(ioapic_id
);
1337 pr_warn("No mapping iommu for ioapic %d\n", ioapic_id
);
1341 index
= alloc_irte(iommu
, irq
, 1);
1343 pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id
);
1347 prepare_irte(&irte
, vector
, destination
);
1349 /* Set source-id of interrupt request */
1350 set_ioapic_sid(&irte
, ioapic_id
);
1352 modify_irte(irq
, &irte
);
1354 apic_printk(APIC_VERBOSE
, KERN_DEBUG
"IOAPIC[%d]: "
1355 "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
1356 "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
1357 "Avail:%X Vector:%02X Dest:%08X "
1358 "SID:%04X SQ:%X SVT:%X)\n",
1359 attr
->ioapic
, irte
.present
, irte
.fpd
, irte
.dst_mode
,
1360 irte
.redir_hint
, irte
.trigger_mode
, irte
.dlvry_mode
,
1361 irte
.avail
, irte
.vector
, irte
.dest_id
,
1362 irte
.sid
, irte
.sq
, irte
.svt
);
1364 memset(entry
, 0, sizeof(*entry
));
1366 entry
->index2
= (index
>> 15) & 0x1;
1369 entry
->index
= (index
& 0x7fff);
1371 * IO-APIC RTE will be configured with virtual vector.
1372 * irq handler will do the explicit EOI to the io-apic.
1374 entry
->vector
= attr
->ioapic_pin
;
1375 entry
->mask
= 0; /* enable IRQ */
1376 entry
->trigger
= attr
->trigger
;
1377 entry
->polarity
= attr
->polarity
;
1379 /* Mask level triggered irqs.
1380 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
1388 static int setup_ioapic_entry(int irq
, struct IO_APIC_route_entry
*entry
,
1389 unsigned int destination
, int vector
,
1390 struct io_apic_irq_attr
*attr
)
1392 if (intr_remapping_enabled
)
1393 return setup_ir_ioapic_entry(irq
,
1394 (struct IR_IO_APIC_route_entry
*)entry
,
1395 destination
, vector
, attr
);
1397 memset(entry
, 0, sizeof(*entry
));
1399 entry
->delivery_mode
= apic
->irq_delivery_mode
;
1400 entry
->dest_mode
= apic
->irq_dest_mode
;
1401 entry
->dest
= destination
;
1402 entry
->vector
= vector
;
1403 entry
->mask
= 0; /* enable IRQ */
1404 entry
->trigger
= attr
->trigger
;
1405 entry
->polarity
= attr
->polarity
;
1408 * Mask level triggered irqs.
1409 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
1417 static void setup_ioapic_irq(unsigned int irq
, struct irq_cfg
*cfg
,
1418 struct io_apic_irq_attr
*attr
)
1420 struct IO_APIC_route_entry entry
;
1423 if (!IO_APIC_IRQ(irq
))
1426 * For legacy irqs, cfg->domain starts with cpu 0 for legacy
1427 * controllers like 8259. Now that IO-APIC can handle this irq, update
1430 if (irq
< legacy_pic
->nr_legacy_irqs
&& cpumask_test_cpu(0, cfg
->domain
))
1431 apic
->vector_allocation_domain(0, cfg
->domain
);
1433 if (assign_irq_vector(irq
, cfg
, apic
->target_cpus()))
1436 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
, apic
->target_cpus());
1438 apic_printk(APIC_VERBOSE
,KERN_DEBUG
1439 "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
1440 "IRQ %d Mode:%i Active:%i Dest:%d)\n",
1441 attr
->ioapic
, mpc_ioapic_id(attr
->ioapic
), attr
->ioapic_pin
,
1442 cfg
->vector
, irq
, attr
->trigger
, attr
->polarity
, dest
);
1444 if (setup_ioapic_entry(irq
, &entry
, dest
, cfg
->vector
, attr
)) {
1445 pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n",
1446 mpc_ioapic_id(attr
->ioapic
), attr
->ioapic_pin
);
1447 __clear_irq_vector(irq
, cfg
);
1452 ioapic_register_intr(irq
, cfg
, attr
->trigger
);
1453 if (irq
< legacy_pic
->nr_legacy_irqs
)
1454 legacy_pic
->mask(irq
);
1456 ioapic_write_entry(attr
->ioapic
, attr
->ioapic_pin
, entry
);
1459 static bool __init
io_apic_pin_not_connected(int idx
, int ioapic_idx
, int pin
)
1464 apic_printk(APIC_VERBOSE
, KERN_DEBUG
" apic %d pin %d not connected\n",
1465 mpc_ioapic_id(ioapic_idx
), pin
);
1469 static void __init
__io_apic_setup_irqs(unsigned int ioapic_idx
)
1471 int idx
, node
= cpu_to_node(0);
1472 struct io_apic_irq_attr attr
;
1473 unsigned int pin
, irq
;
1475 for (pin
= 0; pin
< ioapics
[ioapic_idx
].nr_registers
; pin
++) {
1476 idx
= find_irq_entry(ioapic_idx
, pin
, mp_INT
);
1477 if (io_apic_pin_not_connected(idx
, ioapic_idx
, pin
))
1480 irq
= pin_2_irq(idx
, ioapic_idx
, pin
);
1482 if ((ioapic_idx
> 0) && (irq
> 16))
1486 * Skip the timer IRQ if there's a quirk handler
1487 * installed and if it returns 1:
1489 if (apic
->multi_timer_check
&&
1490 apic
->multi_timer_check(ioapic_idx
, irq
))
1493 set_io_apic_irq_attr(&attr
, ioapic_idx
, pin
, irq_trigger(idx
),
1496 io_apic_setup_irq_pin(irq
, node
, &attr
);
1500 static void __init
setup_IO_APIC_irqs(void)
1502 unsigned int ioapic_idx
;
1504 apic_printk(APIC_VERBOSE
, KERN_DEBUG
"init IO_APIC IRQs\n");
1506 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1507 __io_apic_setup_irqs(ioapic_idx
);
1511 * for the gsit that is not in first ioapic
1512 * but could not use acpi_register_gsi()
1513 * like some special sci in IBM x3330
1515 void setup_IO_APIC_irq_extra(u32 gsi
)
1517 int ioapic_idx
= 0, pin
, idx
, irq
, node
= cpu_to_node(0);
1518 struct io_apic_irq_attr attr
;
1521 * Convert 'gsi' to 'ioapic.pin'.
1523 ioapic_idx
= mp_find_ioapic(gsi
);
1527 pin
= mp_find_ioapic_pin(ioapic_idx
, gsi
);
1528 idx
= find_irq_entry(ioapic_idx
, pin
, mp_INT
);
1532 irq
= pin_2_irq(idx
, ioapic_idx
, pin
);
1534 /* Only handle the non legacy irqs on secondary ioapics */
1535 if (ioapic_idx
== 0 || irq
< NR_IRQS_LEGACY
)
1538 set_io_apic_irq_attr(&attr
, ioapic_idx
, pin
, irq_trigger(idx
),
1541 io_apic_setup_irq_pin_once(irq
, node
, &attr
);
1545 * Set up the timer pin, possibly with the 8259A-master behind.
1547 static void __init
setup_timer_IRQ0_pin(unsigned int ioapic_idx
,
1548 unsigned int pin
, int vector
)
1550 struct IO_APIC_route_entry entry
;
1552 if (intr_remapping_enabled
)
1555 memset(&entry
, 0, sizeof(entry
));
1558 * We use logical delivery to get the timer IRQ
1561 entry
.dest_mode
= apic
->irq_dest_mode
;
1562 entry
.mask
= 0; /* don't mask IRQ for edge */
1563 entry
.dest
= apic
->cpu_mask_to_apicid(apic
->target_cpus());
1564 entry
.delivery_mode
= apic
->irq_delivery_mode
;
1567 entry
.vector
= vector
;
1570 * The timer IRQ doesn't have to know that behind the
1571 * scene we may have a 8259A-master in AEOI mode ...
1573 irq_set_chip_and_handler_name(0, &ioapic_chip
, handle_edge_irq
,
1577 * Add it to the IO-APIC irq-routing table:
1579 ioapic_write_entry(ioapic_idx
, pin
, entry
);
1582 __apicdebuginit(void) print_IO_APIC(int ioapic_idx
)
1585 union IO_APIC_reg_00 reg_00
;
1586 union IO_APIC_reg_01 reg_01
;
1587 union IO_APIC_reg_02 reg_02
;
1588 union IO_APIC_reg_03 reg_03
;
1589 unsigned long flags
;
1591 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
1592 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
1593 reg_01
.raw
= io_apic_read(ioapic_idx
, 1);
1594 if (reg_01
.bits
.version
>= 0x10)
1595 reg_02
.raw
= io_apic_read(ioapic_idx
, 2);
1596 if (reg_01
.bits
.version
>= 0x20)
1597 reg_03
.raw
= io_apic_read(ioapic_idx
, 3);
1598 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
1601 printk(KERN_DEBUG
"IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx
));
1602 printk(KERN_DEBUG
".... register #00: %08X\n", reg_00
.raw
);
1603 printk(KERN_DEBUG
"....... : physical APIC id: %02X\n", reg_00
.bits
.ID
);
1604 printk(KERN_DEBUG
"....... : Delivery Type: %X\n", reg_00
.bits
.delivery_type
);
1605 printk(KERN_DEBUG
"....... : LTS : %X\n", reg_00
.bits
.LTS
);
1607 printk(KERN_DEBUG
".... register #01: %08X\n", *(int *)®_01
);
1608 printk(KERN_DEBUG
"....... : max redirection entries: %02X\n",
1609 reg_01
.bits
.entries
);
1611 printk(KERN_DEBUG
"....... : PRQ implemented: %X\n", reg_01
.bits
.PRQ
);
1612 printk(KERN_DEBUG
"....... : IO APIC version: %02X\n",
1613 reg_01
.bits
.version
);
1616 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
1617 * but the value of reg_02 is read as the previous read register
1618 * value, so ignore it if reg_02 == reg_01.
1620 if (reg_01
.bits
.version
>= 0x10 && reg_02
.raw
!= reg_01
.raw
) {
1621 printk(KERN_DEBUG
".... register #02: %08X\n", reg_02
.raw
);
1622 printk(KERN_DEBUG
"....... : arbitration: %02X\n", reg_02
.bits
.arbitration
);
1626 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
1627 * or reg_03, but the value of reg_0[23] is read as the previous read
1628 * register value, so ignore it if reg_03 == reg_0[12].
1630 if (reg_01
.bits
.version
>= 0x20 && reg_03
.raw
!= reg_02
.raw
&&
1631 reg_03
.raw
!= reg_01
.raw
) {
1632 printk(KERN_DEBUG
".... register #03: %08X\n", reg_03
.raw
);
1633 printk(KERN_DEBUG
"....... : Boot DT : %X\n", reg_03
.bits
.boot_DT
);
1636 printk(KERN_DEBUG
".... IRQ redirection table:\n");
1638 if (intr_remapping_enabled
) {
1639 printk(KERN_DEBUG
" NR Indx Fmt Mask Trig IRR"
1640 " Pol Stat Indx2 Zero Vect:\n");
1642 printk(KERN_DEBUG
" NR Dst Mask Trig IRR Pol"
1643 " Stat Dmod Deli Vect:\n");
1646 for (i
= 0; i
<= reg_01
.bits
.entries
; i
++) {
1647 if (intr_remapping_enabled
) {
1648 struct IO_APIC_route_entry entry
;
1649 struct IR_IO_APIC_route_entry
*ir_entry
;
1651 entry
= ioapic_read_entry(ioapic_idx
, i
);
1652 ir_entry
= (struct IR_IO_APIC_route_entry
*) &entry
;
1653 printk(KERN_DEBUG
" %02x %04X ",
1657 printk("%1d %1d %1d %1d %1d "
1658 "%1d %1d %X %02X\n",
1664 ir_entry
->delivery_status
,
1670 struct IO_APIC_route_entry entry
;
1672 entry
= ioapic_read_entry(ioapic_idx
, i
);
1673 printk(KERN_DEBUG
" %02x %02X ",
1677 printk("%1d %1d %1d %1d %1d "
1683 entry
.delivery_status
,
1685 entry
.delivery_mode
,
1692 __apicdebuginit(void) print_IO_APICs(void)
1695 struct irq_cfg
*cfg
;
1697 struct irq_chip
*chip
;
1699 printk(KERN_DEBUG
"number of MP IRQ sources: %d.\n", mp_irq_entries
);
1700 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1701 printk(KERN_DEBUG
"number of IO-APIC #%d registers: %d.\n",
1702 mpc_ioapic_id(ioapic_idx
),
1703 ioapics
[ioapic_idx
].nr_registers
);
1706 * We are a bit conservative about what we expect. We have to
1707 * know about every hardware change ASAP.
1709 printk(KERN_INFO
"testing the IO APIC.......................\n");
1711 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++)
1712 print_IO_APIC(ioapic_idx
);
1714 printk(KERN_DEBUG
"IRQ to pin mappings:\n");
1715 for_each_active_irq(irq
) {
1716 struct irq_pin_list
*entry
;
1718 chip
= irq_get_chip(irq
);
1719 if (chip
!= &ioapic_chip
)
1722 cfg
= irq_get_chip_data(irq
);
1725 entry
= cfg
->irq_2_pin
;
1728 printk(KERN_DEBUG
"IRQ%d ", irq
);
1729 for_each_irq_pin(entry
, cfg
->irq_2_pin
)
1730 printk("-> %d:%d", entry
->apic
, entry
->pin
);
1734 printk(KERN_INFO
".................................... done.\n");
1737 __apicdebuginit(void) print_APIC_field(int base
)
1743 for (i
= 0; i
< 8; i
++)
1744 printk(KERN_CONT
"%08x", apic_read(base
+ i
*0x10));
1746 printk(KERN_CONT
"\n");
1749 __apicdebuginit(void) print_local_APIC(void *dummy
)
1751 unsigned int i
, v
, ver
, maxlvt
;
1754 printk(KERN_DEBUG
"printing local APIC contents on CPU#%d/%d:\n",
1755 smp_processor_id(), hard_smp_processor_id());
1756 v
= apic_read(APIC_ID
);
1757 printk(KERN_INFO
"... APIC ID: %08x (%01x)\n", v
, read_apic_id());
1758 v
= apic_read(APIC_LVR
);
1759 printk(KERN_INFO
"... APIC VERSION: %08x\n", v
);
1760 ver
= GET_APIC_VERSION(v
);
1761 maxlvt
= lapic_get_maxlvt();
1763 v
= apic_read(APIC_TASKPRI
);
1764 printk(KERN_DEBUG
"... APIC TASKPRI: %08x (%02x)\n", v
, v
& APIC_TPRI_MASK
);
1766 if (APIC_INTEGRATED(ver
)) { /* !82489DX */
1767 if (!APIC_XAPIC(ver
)) {
1768 v
= apic_read(APIC_ARBPRI
);
1769 printk(KERN_DEBUG
"... APIC ARBPRI: %08x (%02x)\n", v
,
1770 v
& APIC_ARBPRI_MASK
);
1772 v
= apic_read(APIC_PROCPRI
);
1773 printk(KERN_DEBUG
"... APIC PROCPRI: %08x\n", v
);
1777 * Remote read supported only in the 82489DX and local APIC for
1778 * Pentium processors.
1780 if (!APIC_INTEGRATED(ver
) || maxlvt
== 3) {
1781 v
= apic_read(APIC_RRR
);
1782 printk(KERN_DEBUG
"... APIC RRR: %08x\n", v
);
1785 v
= apic_read(APIC_LDR
);
1786 printk(KERN_DEBUG
"... APIC LDR: %08x\n", v
);
1787 if (!x2apic_enabled()) {
1788 v
= apic_read(APIC_DFR
);
1789 printk(KERN_DEBUG
"... APIC DFR: %08x\n", v
);
1791 v
= apic_read(APIC_SPIV
);
1792 printk(KERN_DEBUG
"... APIC SPIV: %08x\n", v
);
1794 printk(KERN_DEBUG
"... APIC ISR field:\n");
1795 print_APIC_field(APIC_ISR
);
1796 printk(KERN_DEBUG
"... APIC TMR field:\n");
1797 print_APIC_field(APIC_TMR
);
1798 printk(KERN_DEBUG
"... APIC IRR field:\n");
1799 print_APIC_field(APIC_IRR
);
1801 if (APIC_INTEGRATED(ver
)) { /* !82489DX */
1802 if (maxlvt
> 3) /* Due to the Pentium erratum 3AP. */
1803 apic_write(APIC_ESR
, 0);
1805 v
= apic_read(APIC_ESR
);
1806 printk(KERN_DEBUG
"... APIC ESR: %08x\n", v
);
1809 icr
= apic_icr_read();
1810 printk(KERN_DEBUG
"... APIC ICR: %08x\n", (u32
)icr
);
1811 printk(KERN_DEBUG
"... APIC ICR2: %08x\n", (u32
)(icr
>> 32));
1813 v
= apic_read(APIC_LVTT
);
1814 printk(KERN_DEBUG
"... APIC LVTT: %08x\n", v
);
1816 if (maxlvt
> 3) { /* PC is LVT#4. */
1817 v
= apic_read(APIC_LVTPC
);
1818 printk(KERN_DEBUG
"... APIC LVTPC: %08x\n", v
);
1820 v
= apic_read(APIC_LVT0
);
1821 printk(KERN_DEBUG
"... APIC LVT0: %08x\n", v
);
1822 v
= apic_read(APIC_LVT1
);
1823 printk(KERN_DEBUG
"... APIC LVT1: %08x\n", v
);
1825 if (maxlvt
> 2) { /* ERR is LVT#3. */
1826 v
= apic_read(APIC_LVTERR
);
1827 printk(KERN_DEBUG
"... APIC LVTERR: %08x\n", v
);
1830 v
= apic_read(APIC_TMICT
);
1831 printk(KERN_DEBUG
"... APIC TMICT: %08x\n", v
);
1832 v
= apic_read(APIC_TMCCT
);
1833 printk(KERN_DEBUG
"... APIC TMCCT: %08x\n", v
);
1834 v
= apic_read(APIC_TDCR
);
1835 printk(KERN_DEBUG
"... APIC TDCR: %08x\n", v
);
1837 if (boot_cpu_has(X86_FEATURE_EXTAPIC
)) {
1838 v
= apic_read(APIC_EFEAT
);
1839 maxlvt
= (v
>> 16) & 0xff;
1840 printk(KERN_DEBUG
"... APIC EFEAT: %08x\n", v
);
1841 v
= apic_read(APIC_ECTRL
);
1842 printk(KERN_DEBUG
"... APIC ECTRL: %08x\n", v
);
1843 for (i
= 0; i
< maxlvt
; i
++) {
1844 v
= apic_read(APIC_EILVTn(i
));
1845 printk(KERN_DEBUG
"... APIC EILVT%d: %08x\n", i
, v
);
1851 __apicdebuginit(void) print_local_APICs(int maxcpu
)
1859 for_each_online_cpu(cpu
) {
1862 smp_call_function_single(cpu
, print_local_APIC
, NULL
, 1);
1867 __apicdebuginit(void) print_PIC(void)
1870 unsigned long flags
;
1872 if (!legacy_pic
->nr_legacy_irqs
)
1875 printk(KERN_DEBUG
"\nprinting PIC contents\n");
1877 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
1879 v
= inb(0xa1) << 8 | inb(0x21);
1880 printk(KERN_DEBUG
"... PIC IMR: %04x\n", v
);
1882 v
= inb(0xa0) << 8 | inb(0x20);
1883 printk(KERN_DEBUG
"... PIC IRR: %04x\n", v
);
1887 v
= inb(0xa0) << 8 | inb(0x20);
1891 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
1893 printk(KERN_DEBUG
"... PIC ISR: %04x\n", v
);
1895 v
= inb(0x4d1) << 8 | inb(0x4d0);
1896 printk(KERN_DEBUG
"... PIC ELCR: %04x\n", v
);
1899 static int __initdata show_lapic
= 1;
1900 static __init
int setup_show_lapic(char *arg
)
1904 if (strcmp(arg
, "all") == 0) {
1905 show_lapic
= CONFIG_NR_CPUS
;
1907 get_option(&arg
, &num
);
1914 __setup("show_lapic=", setup_show_lapic
);
1916 __apicdebuginit(int) print_ICs(void)
1918 if (apic_verbosity
== APIC_QUIET
)
1923 /* don't print out if apic is not there */
1924 if (!cpu_has_apic
&& !apic_from_smp_config())
1927 print_local_APICs(show_lapic
);
1933 late_initcall(print_ICs
);
1936 /* Where if anywhere is the i8259 connect in external int mode */
1937 static struct { int pin
, apic
; } ioapic_i8259
= { -1, -1 };
1939 void __init
enable_IO_APIC(void)
1941 int i8259_apic
, i8259_pin
;
1944 if (!legacy_pic
->nr_legacy_irqs
)
1947 for(apic
= 0; apic
< nr_ioapics
; apic
++) {
1949 /* See if any of the pins is in ExtINT mode */
1950 for (pin
= 0; pin
< ioapics
[apic
].nr_registers
; pin
++) {
1951 struct IO_APIC_route_entry entry
;
1952 entry
= ioapic_read_entry(apic
, pin
);
1954 /* If the interrupt line is enabled and in ExtInt mode
1955 * I have found the pin where the i8259 is connected.
1957 if ((entry
.mask
== 0) && (entry
.delivery_mode
== dest_ExtINT
)) {
1958 ioapic_i8259
.apic
= apic
;
1959 ioapic_i8259
.pin
= pin
;
1965 /* Look to see what if the MP table has reported the ExtINT */
1966 /* If we could not find the appropriate pin by looking at the ioapic
1967 * the i8259 probably is not connected the ioapic but give the
1968 * mptable a chance anyway.
1970 i8259_pin
= find_isa_irq_pin(0, mp_ExtINT
);
1971 i8259_apic
= find_isa_irq_apic(0, mp_ExtINT
);
1972 /* Trust the MP table if nothing is setup in the hardware */
1973 if ((ioapic_i8259
.pin
== -1) && (i8259_pin
>= 0)) {
1974 printk(KERN_WARNING
"ExtINT not setup in hardware but reported by MP table\n");
1975 ioapic_i8259
.pin
= i8259_pin
;
1976 ioapic_i8259
.apic
= i8259_apic
;
1978 /* Complain if the MP table and the hardware disagree */
1979 if (((ioapic_i8259
.apic
!= i8259_apic
) || (ioapic_i8259
.pin
!= i8259_pin
)) &&
1980 (i8259_pin
>= 0) && (ioapic_i8259
.pin
>= 0))
1982 printk(KERN_WARNING
"ExtINT in hardware and MP table differ\n");
1986 * Do not trust the IO-APIC being empty at bootup
1992 * Not an __init, needed by the reboot code
1994 void disable_IO_APIC(void)
1997 * Clear the IO-APIC before rebooting:
2001 if (!legacy_pic
->nr_legacy_irqs
)
2005 * If the i8259 is routed through an IOAPIC
2006 * Put that IOAPIC in virtual wire mode
2007 * so legacy interrupts can be delivered.
2009 * With interrupt-remapping, for now we will use virtual wire A mode,
2010 * as virtual wire B is little complex (need to configure both
2011 * IOAPIC RTE as well as interrupt-remapping table entry).
2012 * As this gets called during crash dump, keep this simple for now.
2014 if (ioapic_i8259
.pin
!= -1 && !intr_remapping_enabled
) {
2015 struct IO_APIC_route_entry entry
;
2017 memset(&entry
, 0, sizeof(entry
));
2018 entry
.mask
= 0; /* Enabled */
2019 entry
.trigger
= 0; /* Edge */
2021 entry
.polarity
= 0; /* High */
2022 entry
.delivery_status
= 0;
2023 entry
.dest_mode
= 0; /* Physical */
2024 entry
.delivery_mode
= dest_ExtINT
; /* ExtInt */
2026 entry
.dest
= read_apic_id();
2029 * Add it to the IO-APIC irq-routing table:
2031 ioapic_write_entry(ioapic_i8259
.apic
, ioapic_i8259
.pin
, entry
);
2035 * Use virtual wire A mode when interrupt remapping is enabled.
2037 if (cpu_has_apic
|| apic_from_smp_config())
2038 disconnect_bsp_APIC(!intr_remapping_enabled
&&
2039 ioapic_i8259
.pin
!= -1);
2042 #ifdef CONFIG_X86_32
2044 * function to set the IO-APIC physical IDs based on the
2045 * values stored in the MPC table.
2047 * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
2049 void __init
setup_ioapic_ids_from_mpc_nocheck(void)
2051 union IO_APIC_reg_00 reg_00
;
2052 physid_mask_t phys_id_present_map
;
2055 unsigned char old_id
;
2056 unsigned long flags
;
2059 * This is broken; anything with a real cpu count has to
2060 * circumvent this idiocy regardless.
2062 apic
->ioapic_phys_id_map(&phys_cpu_present_map
, &phys_id_present_map
);
2065 * Set the IOAPIC ID to the value stored in the MPC table.
2067 for (ioapic_idx
= 0; ioapic_idx
< nr_ioapics
; ioapic_idx
++) {
2068 /* Read the register 0 value */
2069 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2070 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
2071 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2073 old_id
= mpc_ioapic_id(ioapic_idx
);
2075 if (mpc_ioapic_id(ioapic_idx
) >= get_physical_broadcast()) {
2076 printk(KERN_ERR
"BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
2077 ioapic_idx
, mpc_ioapic_id(ioapic_idx
));
2078 printk(KERN_ERR
"... fixing up to %d. (tell your hw vendor)\n",
2080 ioapics
[ioapic_idx
].mp_config
.apicid
= reg_00
.bits
.ID
;
2084 * Sanity check, is the ID really free? Every APIC in a
2085 * system must have a unique ID or we get lots of nice
2086 * 'stuck on smp_invalidate_needed IPI wait' messages.
2088 if (apic
->check_apicid_used(&phys_id_present_map
,
2089 mpc_ioapic_id(ioapic_idx
))) {
2090 printk(KERN_ERR
"BIOS bug, IO-APIC#%d ID %d is already used!...\n",
2091 ioapic_idx
, mpc_ioapic_id(ioapic_idx
));
2092 for (i
= 0; i
< get_physical_broadcast(); i
++)
2093 if (!physid_isset(i
, phys_id_present_map
))
2095 if (i
>= get_physical_broadcast())
2096 panic("Max APIC ID exceeded!\n");
2097 printk(KERN_ERR
"... fixing up to %d. (tell your hw vendor)\n",
2099 physid_set(i
, phys_id_present_map
);
2100 ioapics
[ioapic_idx
].mp_config
.apicid
= i
;
2103 apic
->apicid_to_cpu_present(mpc_ioapic_id(ioapic_idx
),
2105 apic_printk(APIC_VERBOSE
, "Setting %d in the "
2106 "phys_id_present_map\n",
2107 mpc_ioapic_id(ioapic_idx
));
2108 physids_or(phys_id_present_map
, phys_id_present_map
, tmp
);
2112 * We need to adjust the IRQ routing table
2113 * if the ID changed.
2115 if (old_id
!= mpc_ioapic_id(ioapic_idx
))
2116 for (i
= 0; i
< mp_irq_entries
; i
++)
2117 if (mp_irqs
[i
].dstapic
== old_id
)
2119 = mpc_ioapic_id(ioapic_idx
);
2122 * Update the ID register according to the right value
2123 * from the MPC table if they are different.
2125 if (mpc_ioapic_id(ioapic_idx
) == reg_00
.bits
.ID
)
2128 apic_printk(APIC_VERBOSE
, KERN_INFO
2129 "...changing IO-APIC physical APIC ID to %d ...",
2130 mpc_ioapic_id(ioapic_idx
));
2132 reg_00
.bits
.ID
= mpc_ioapic_id(ioapic_idx
);
2133 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2134 io_apic_write(ioapic_idx
, 0, reg_00
.raw
);
2135 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2140 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2141 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
2142 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2143 if (reg_00
.bits
.ID
!= mpc_ioapic_id(ioapic_idx
))
2144 printk("could not set ID!\n");
2146 apic_printk(APIC_VERBOSE
, " ok.\n");
2150 void __init
setup_ioapic_ids_from_mpc(void)
2156 * Don't check I/O APIC IDs for xAPIC systems. They have
2157 * no meaning without the serial APIC bus.
2159 if (!(boot_cpu_data
.x86_vendor
== X86_VENDOR_INTEL
)
2160 || APIC_XAPIC(apic_version
[boot_cpu_physical_apicid
]))
2162 setup_ioapic_ids_from_mpc_nocheck();
2166 int no_timer_check __initdata
;
2168 static int __init
notimercheck(char *s
)
2173 __setup("no_timer_check", notimercheck
);
2176 * There is a nasty bug in some older SMP boards, their mptable lies
2177 * about the timer IRQ. We do the following to work around the situation:
2179 * - timer IRQ defaults to IO-APIC IRQ
2180 * - if this function detects that timer IRQs are defunct, then we fall
2181 * back to ISA timer IRQs
2183 static int __init
timer_irq_works(void)
2185 unsigned long t1
= jiffies
;
2186 unsigned long flags
;
2191 local_save_flags(flags
);
2193 /* Let ten ticks pass... */
2194 mdelay((10 * 1000) / HZ
);
2195 local_irq_restore(flags
);
2198 * Expect a few ticks at least, to be sure some possible
2199 * glue logic does not lock up after one or two first
2200 * ticks in a non-ExtINT mode. Also the local APIC
2201 * might have cached one ExtINT interrupt. Finally, at
2202 * least one tick may be lost due to delays.
2206 if (time_after(jiffies
, t1
+ 4))
2212 * In the SMP+IOAPIC case it might happen that there are an unspecified
2213 * number of pending IRQ events unhandled. These cases are very rare,
2214 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
2215 * better to do it this way as thus we do not have to be aware of
2216 * 'pending' interrupts in the IRQ path, except at this point.
2219 * Edge triggered needs to resend any interrupt
2220 * that was delayed but this is now handled in the device
2225 * Starting up a edge-triggered IO-APIC interrupt is
2226 * nasty - we need to make sure that we get the edge.
2227 * If it is already asserted for some reason, we need
2228 * return 1 to indicate that is was pending.
2230 * This is not complete - we should be able to fake
2231 * an edge even if it isn't on the 8259A...
2234 static unsigned int startup_ioapic_irq(struct irq_data
*data
)
2236 int was_pending
= 0, irq
= data
->irq
;
2237 unsigned long flags
;
2239 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2240 if (irq
< legacy_pic
->nr_legacy_irqs
) {
2241 legacy_pic
->mask(irq
);
2242 if (legacy_pic
->irq_pending(irq
))
2245 __unmask_ioapic(data
->chip_data
);
2246 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2251 static int ioapic_retrigger_irq(struct irq_data
*data
)
2253 struct irq_cfg
*cfg
= data
->chip_data
;
2254 unsigned long flags
;
2256 raw_spin_lock_irqsave(&vector_lock
, flags
);
2257 apic
->send_IPI_mask(cpumask_of(cpumask_first(cfg
->domain
)), cfg
->vector
);
2258 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
2264 * Level and edge triggered IO-APIC interrupts need different handling,
2265 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
2266 * handled with the level-triggered descriptor, but that one has slightly
2267 * more overhead. Level-triggered interrupts cannot be handled with the
2268 * edge-triggered handler, without risking IRQ storms and other ugly
2273 void send_cleanup_vector(struct irq_cfg
*cfg
)
2275 cpumask_var_t cleanup_mask
;
2277 if (unlikely(!alloc_cpumask_var(&cleanup_mask
, GFP_ATOMIC
))) {
2279 for_each_cpu_and(i
, cfg
->old_domain
, cpu_online_mask
)
2280 apic
->send_IPI_mask(cpumask_of(i
), IRQ_MOVE_CLEANUP_VECTOR
);
2282 cpumask_and(cleanup_mask
, cfg
->old_domain
, cpu_online_mask
);
2283 apic
->send_IPI_mask(cleanup_mask
, IRQ_MOVE_CLEANUP_VECTOR
);
2284 free_cpumask_var(cleanup_mask
);
2286 cfg
->move_in_progress
= 0;
2289 static void __target_IO_APIC_irq(unsigned int irq
, unsigned int dest
, struct irq_cfg
*cfg
)
2292 struct irq_pin_list
*entry
;
2293 u8 vector
= cfg
->vector
;
2295 for_each_irq_pin(entry
, cfg
->irq_2_pin
) {
2301 * With interrupt-remapping, destination information comes
2302 * from interrupt-remapping table entry.
2304 if (!irq_remapped(cfg
))
2305 io_apic_write(apic
, 0x11 + pin
*2, dest
);
2306 reg
= io_apic_read(apic
, 0x10 + pin
*2);
2307 reg
&= ~IO_APIC_REDIR_VECTOR_MASK
;
2309 io_apic_modify(apic
, 0x10 + pin
*2, reg
);
2314 * Either sets data->affinity to a valid value, and returns
2315 * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and
2316 * leaves data->affinity untouched.
2318 int __ioapic_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
2319 unsigned int *dest_id
)
2321 struct irq_cfg
*cfg
= data
->chip_data
;
2323 if (!cpumask_intersects(mask
, cpu_online_mask
))
2326 if (assign_irq_vector(data
->irq
, data
->chip_data
, mask
))
2329 cpumask_copy(data
->affinity
, mask
);
2331 *dest_id
= apic
->cpu_mask_to_apicid_and(mask
, cfg
->domain
);
2336 ioapic_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
2339 unsigned int dest
, irq
= data
->irq
;
2340 unsigned long flags
;
2343 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
2344 ret
= __ioapic_set_affinity(data
, mask
, &dest
);
2346 /* Only the high 8 bits are valid. */
2347 dest
= SET_APIC_LOGICAL_ID(dest
);
2348 __target_IO_APIC_irq(irq
, dest
, data
->chip_data
);
2350 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
2354 #ifdef CONFIG_IRQ_REMAP
2357 * Migrate the IO-APIC irq in the presence of intr-remapping.
2359 * For both level and edge triggered, irq migration is a simple atomic
2360 * update(of vector and cpu destination) of IRTE and flush the hardware cache.
2362 * For level triggered, we eliminate the io-apic RTE modification (with the
2363 * updated vector information), by using a virtual vector (io-apic pin number).
2364 * Real vector that is used for interrupting cpu will be coming from
2365 * the interrupt-remapping table entry.
2367 * As the migration is a simple atomic update of IRTE, the same mechanism
2368 * is used to migrate MSI irq's in the presence of interrupt-remapping.
2371 ir_ioapic_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
2374 struct irq_cfg
*cfg
= data
->chip_data
;
2375 unsigned int dest
, irq
= data
->irq
;
2378 if (!cpumask_intersects(mask
, cpu_online_mask
))
2381 if (get_irte(irq
, &irte
))
2384 if (assign_irq_vector(irq
, cfg
, mask
))
2387 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
, mask
);
2389 irte
.vector
= cfg
->vector
;
2390 irte
.dest_id
= IRTE_DEST(dest
);
2393 * Atomically updates the IRTE with the new destination, vector
2394 * and flushes the interrupt entry cache.
2396 modify_irte(irq
, &irte
);
2399 * After this point, all the interrupts will start arriving
2400 * at the new destination. So, time to cleanup the previous
2401 * vector allocation.
2403 if (cfg
->move_in_progress
)
2404 send_cleanup_vector(cfg
);
2406 cpumask_copy(data
->affinity
, mask
);
2412 ir_ioapic_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
2419 asmlinkage
void smp_irq_move_cleanup_interrupt(void)
2421 unsigned vector
, me
;
2427 me
= smp_processor_id();
2428 for (vector
= FIRST_EXTERNAL_VECTOR
; vector
< NR_VECTORS
; vector
++) {
2431 struct irq_desc
*desc
;
2432 struct irq_cfg
*cfg
;
2433 irq
= __this_cpu_read(vector_irq
[vector
]);
2438 desc
= irq_to_desc(irq
);
2443 raw_spin_lock(&desc
->lock
);
2446 * Check if the irq migration is in progress. If so, we
2447 * haven't received the cleanup request yet for this irq.
2449 if (cfg
->move_in_progress
)
2452 if (vector
== cfg
->vector
&& cpumask_test_cpu(me
, cfg
->domain
))
2455 irr
= apic_read(APIC_IRR
+ (vector
/ 32 * 0x10));
2457 * Check if the vector that needs to be cleanedup is
2458 * registered at the cpu's IRR. If so, then this is not
2459 * the best time to clean it up. Lets clean it up in the
2460 * next attempt by sending another IRQ_MOVE_CLEANUP_VECTOR
2463 if (irr
& (1 << (vector
% 32))) {
2464 apic
->send_IPI_self(IRQ_MOVE_CLEANUP_VECTOR
);
2467 __this_cpu_write(vector_irq
[vector
], -1);
2469 raw_spin_unlock(&desc
->lock
);
2475 static void __irq_complete_move(struct irq_cfg
*cfg
, unsigned vector
)
2479 if (likely(!cfg
->move_in_progress
))
2482 me
= smp_processor_id();
2484 if (vector
== cfg
->vector
&& cpumask_test_cpu(me
, cfg
->domain
))
2485 send_cleanup_vector(cfg
);
2488 static void irq_complete_move(struct irq_cfg
*cfg
)
2490 __irq_complete_move(cfg
, ~get_irq_regs()->orig_ax
);
2493 void irq_force_complete_move(int irq
)
2495 struct irq_cfg
*cfg
= irq_get_chip_data(irq
);
2500 __irq_complete_move(cfg
, cfg
->vector
);
2503 static inline void irq_complete_move(struct irq_cfg
*cfg
) { }
2506 static void ack_apic_edge(struct irq_data
*data
)
2508 irq_complete_move(data
->chip_data
);
2513 atomic_t irq_mis_count
;
2515 static void ack_apic_level(struct irq_data
*data
)
2517 struct irq_cfg
*cfg
= data
->chip_data
;
2518 int i
, do_unmask_irq
= 0, irq
= data
->irq
;
2521 irq_complete_move(cfg
);
2522 #ifdef CONFIG_GENERIC_PENDING_IRQ
2523 /* If we are moving the irq we need to mask it */
2524 if (unlikely(irqd_is_setaffinity_pending(data
))) {
2531 * It appears there is an erratum which affects at least version 0x11
2532 * of I/O APIC (that's the 82093AA and cores integrated into various
2533 * chipsets). Under certain conditions a level-triggered interrupt is
2534 * erroneously delivered as edge-triggered one but the respective IRR
2535 * bit gets set nevertheless. As a result the I/O unit expects an EOI
2536 * message but it will never arrive and further interrupts are blocked
2537 * from the source. The exact reason is so far unknown, but the
2538 * phenomenon was observed when two consecutive interrupt requests
2539 * from a given source get delivered to the same CPU and the source is
2540 * temporarily disabled in between.
2542 * A workaround is to simulate an EOI message manually. We achieve it
2543 * by setting the trigger mode to edge and then to level when the edge
2544 * trigger mode gets detected in the TMR of a local APIC for a
2545 * level-triggered interrupt. We mask the source for the time of the
2546 * operation to prevent an edge-triggered interrupt escaping meanwhile.
2547 * The idea is from Manfred Spraul. --macro
2549 * Also in the case when cpu goes offline, fixup_irqs() will forward
2550 * any unhandled interrupt on the offlined cpu to the new cpu
2551 * destination that is handling the corresponding interrupt. This
2552 * interrupt forwarding is done via IPI's. Hence, in this case also
2553 * level-triggered io-apic interrupt will be seen as an edge
2554 * interrupt in the IRR. And we can't rely on the cpu's EOI
2555 * to be broadcasted to the IO-APIC's which will clear the remoteIRR
2556 * corresponding to the level-triggered interrupt. Hence on IO-APIC's
2557 * supporting EOI register, we do an explicit EOI to clear the
2558 * remote IRR and on IO-APIC's which don't have an EOI register,
2559 * we use the above logic (mask+edge followed by unmask+level) from
2560 * Manfred Spraul to clear the remote IRR.
2563 v
= apic_read(APIC_TMR
+ ((i
& ~0x1f) >> 1));
2566 * We must acknowledge the irq before we move it or the acknowledge will
2567 * not propagate properly.
2572 * Tail end of clearing remote IRR bit (either by delivering the EOI
2573 * message via io-apic EOI register write or simulating it using
2574 * mask+edge followed by unnask+level logic) manually when the
2575 * level triggered interrupt is seen as the edge triggered interrupt
2578 if (!(v
& (1 << (i
& 0x1f)))) {
2579 atomic_inc(&irq_mis_count
);
2581 eoi_ioapic_irq(irq
, cfg
);
2584 /* Now we can move and renable the irq */
2585 if (unlikely(do_unmask_irq
)) {
2586 /* Only migrate the irq if the ack has been received.
2588 * On rare occasions the broadcast level triggered ack gets
2589 * delayed going to ioapics, and if we reprogram the
2590 * vector while Remote IRR is still set the irq will never
2593 * To prevent this scenario we read the Remote IRR bit
2594 * of the ioapic. This has two effects.
2595 * - On any sane system the read of the ioapic will
2596 * flush writes (and acks) going to the ioapic from
2598 * - We get to see if the ACK has actually been delivered.
2600 * Based on failed experiments of reprogramming the
2601 * ioapic entry from outside of irq context starting
2602 * with masking the ioapic entry and then polling until
2603 * Remote IRR was clear before reprogramming the
2604 * ioapic I don't trust the Remote IRR bit to be
2605 * completey accurate.
2607 * However there appears to be no other way to plug
2608 * this race, so if the Remote IRR bit is not
2609 * accurate and is causing problems then it is a hardware bug
2610 * and you can go talk to the chipset vendor about it.
2612 if (!io_apic_level_ack_pending(cfg
))
2613 irq_move_masked_irq(data
);
2618 #ifdef CONFIG_IRQ_REMAP
2619 static void ir_ack_apic_edge(struct irq_data
*data
)
2624 static void ir_ack_apic_level(struct irq_data
*data
)
2627 eoi_ioapic_irq(data
->irq
, data
->chip_data
);
2630 static void ir_print_prefix(struct irq_data
*data
, struct seq_file
*p
)
2632 seq_printf(p
, " IR-%s", data
->chip
->name
);
2635 static void irq_remap_modify_chip_defaults(struct irq_chip
*chip
)
2637 chip
->irq_print_chip
= ir_print_prefix
;
2638 chip
->irq_ack
= ir_ack_apic_edge
;
2639 chip
->irq_eoi
= ir_ack_apic_level
;
2642 chip
->irq_set_affinity
= ir_ioapic_set_affinity
;
2645 #endif /* CONFIG_IRQ_REMAP */
2647 static struct irq_chip ioapic_chip __read_mostly
= {
2649 .irq_startup
= startup_ioapic_irq
,
2650 .irq_mask
= mask_ioapic_irq
,
2651 .irq_unmask
= unmask_ioapic_irq
,
2652 .irq_ack
= ack_apic_edge
,
2653 .irq_eoi
= ack_apic_level
,
2655 .irq_set_affinity
= ioapic_set_affinity
,
2657 .irq_retrigger
= ioapic_retrigger_irq
,
2660 static inline void init_IO_APIC_traps(void)
2662 struct irq_cfg
*cfg
;
2666 * NOTE! The local APIC isn't very good at handling
2667 * multiple interrupts at the same interrupt level.
2668 * As the interrupt level is determined by taking the
2669 * vector number and shifting that right by 4, we
2670 * want to spread these out a bit so that they don't
2671 * all fall in the same interrupt level.
2673 * Also, we've got to be careful not to trash gate
2674 * 0x80, because int 0x80 is hm, kind of importantish. ;)
2676 for_each_active_irq(irq
) {
2677 cfg
= irq_get_chip_data(irq
);
2678 if (IO_APIC_IRQ(irq
) && cfg
&& !cfg
->vector
) {
2680 * Hmm.. We don't have an entry for this,
2681 * so default to an old-fashioned 8259
2682 * interrupt if we can..
2684 if (irq
< legacy_pic
->nr_legacy_irqs
)
2685 legacy_pic
->make_irq(irq
);
2687 /* Strange. Oh, well.. */
2688 irq_set_chip(irq
, &no_irq_chip
);
2694 * The local APIC irq-chip implementation:
2697 static void mask_lapic_irq(struct irq_data
*data
)
2701 v
= apic_read(APIC_LVT0
);
2702 apic_write(APIC_LVT0
, v
| APIC_LVT_MASKED
);
2705 static void unmask_lapic_irq(struct irq_data
*data
)
2709 v
= apic_read(APIC_LVT0
);
2710 apic_write(APIC_LVT0
, v
& ~APIC_LVT_MASKED
);
2713 static void ack_lapic_irq(struct irq_data
*data
)
2718 static struct irq_chip lapic_chip __read_mostly
= {
2719 .name
= "local-APIC",
2720 .irq_mask
= mask_lapic_irq
,
2721 .irq_unmask
= unmask_lapic_irq
,
2722 .irq_ack
= ack_lapic_irq
,
2725 static void lapic_register_intr(int irq
)
2727 irq_clear_status_flags(irq
, IRQ_LEVEL
);
2728 irq_set_chip_and_handler_name(irq
, &lapic_chip
, handle_edge_irq
,
2733 * This looks a bit hackish but it's about the only one way of sending
2734 * a few INTA cycles to 8259As and any associated glue logic. ICR does
2735 * not support the ExtINT mode, unfortunately. We need to send these
2736 * cycles as some i82489DX-based boards have glue logic that keeps the
2737 * 8259A interrupt line asserted until INTA. --macro
2739 static inline void __init
unlock_ExtINT_logic(void)
2742 struct IO_APIC_route_entry entry0
, entry1
;
2743 unsigned char save_control
, save_freq_select
;
2745 pin
= find_isa_irq_pin(8, mp_INT
);
2750 apic
= find_isa_irq_apic(8, mp_INT
);
2756 entry0
= ioapic_read_entry(apic
, pin
);
2757 clear_IO_APIC_pin(apic
, pin
);
2759 memset(&entry1
, 0, sizeof(entry1
));
2761 entry1
.dest_mode
= 0; /* physical delivery */
2762 entry1
.mask
= 0; /* unmask IRQ now */
2763 entry1
.dest
= hard_smp_processor_id();
2764 entry1
.delivery_mode
= dest_ExtINT
;
2765 entry1
.polarity
= entry0
.polarity
;
2769 ioapic_write_entry(apic
, pin
, entry1
);
2771 save_control
= CMOS_READ(RTC_CONTROL
);
2772 save_freq_select
= CMOS_READ(RTC_FREQ_SELECT
);
2773 CMOS_WRITE((save_freq_select
& ~RTC_RATE_SELECT
) | 0x6,
2775 CMOS_WRITE(save_control
| RTC_PIE
, RTC_CONTROL
);
2780 if ((CMOS_READ(RTC_INTR_FLAGS
) & RTC_PF
) == RTC_PF
)
2784 CMOS_WRITE(save_control
, RTC_CONTROL
);
2785 CMOS_WRITE(save_freq_select
, RTC_FREQ_SELECT
);
2786 clear_IO_APIC_pin(apic
, pin
);
2788 ioapic_write_entry(apic
, pin
, entry0
);
2791 static int disable_timer_pin_1 __initdata
;
2792 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
2793 static int __init
disable_timer_pin_setup(char *arg
)
2795 disable_timer_pin_1
= 1;
2798 early_param("disable_timer_pin_1", disable_timer_pin_setup
);
2800 int timer_through_8259 __initdata
;
2803 * This code may look a bit paranoid, but it's supposed to cooperate with
2804 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
2805 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
2806 * fanatically on his truly buggy board.
2808 * FIXME: really need to revamp this for all platforms.
2810 static inline void __init
check_timer(void)
2812 struct irq_cfg
*cfg
= irq_get_chip_data(0);
2813 int node
= cpu_to_node(0);
2814 int apic1
, pin1
, apic2
, pin2
;
2815 unsigned long flags
;
2818 local_irq_save(flags
);
2821 * get/set the timer IRQ vector:
2823 legacy_pic
->mask(0);
2824 assign_irq_vector(0, cfg
, apic
->target_cpus());
2827 * As IRQ0 is to be enabled in the 8259A, the virtual
2828 * wire has to be disabled in the local APIC. Also
2829 * timer interrupts need to be acknowledged manually in
2830 * the 8259A for the i82489DX when using the NMI
2831 * watchdog as that APIC treats NMIs as level-triggered.
2832 * The AEOI mode will finish them in the 8259A
2835 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_EXTINT
);
2836 legacy_pic
->init(1);
2838 pin1
= find_isa_irq_pin(0, mp_INT
);
2839 apic1
= find_isa_irq_apic(0, mp_INT
);
2840 pin2
= ioapic_i8259
.pin
;
2841 apic2
= ioapic_i8259
.apic
;
2843 apic_printk(APIC_QUIET
, KERN_INFO
"..TIMER: vector=0x%02X "
2844 "apic1=%d pin1=%d apic2=%d pin2=%d\n",
2845 cfg
->vector
, apic1
, pin1
, apic2
, pin2
);
2848 * Some BIOS writers are clueless and report the ExtINTA
2849 * I/O APIC input from the cascaded 8259A as the timer
2850 * interrupt input. So just in case, if only one pin
2851 * was found above, try it both directly and through the
2855 if (intr_remapping_enabled
)
2856 panic("BIOS bug: timer not connected to IO-APIC");
2860 } else if (pin2
== -1) {
2867 * Ok, does IRQ0 through the IOAPIC work?
2870 add_pin_to_irq_node(cfg
, node
, apic1
, pin1
);
2871 setup_timer_IRQ0_pin(apic1
, pin1
, cfg
->vector
);
2873 /* for edge trigger, setup_ioapic_irq already
2874 * leave it unmasked.
2875 * so only need to unmask if it is level-trigger
2876 * do we really have level trigger timer?
2879 idx
= find_irq_entry(apic1
, pin1
, mp_INT
);
2880 if (idx
!= -1 && irq_trigger(idx
))
2883 if (timer_irq_works()) {
2884 if (disable_timer_pin_1
> 0)
2885 clear_IO_APIC_pin(0, pin1
);
2888 if (intr_remapping_enabled
)
2889 panic("timer doesn't work through Interrupt-remapped IO-APIC");
2890 local_irq_disable();
2891 clear_IO_APIC_pin(apic1
, pin1
);
2893 apic_printk(APIC_QUIET
, KERN_ERR
"..MP-BIOS bug: "
2894 "8254 timer not connected to IO-APIC\n");
2896 apic_printk(APIC_QUIET
, KERN_INFO
"...trying to set up timer "
2897 "(IRQ0) through the 8259A ...\n");
2898 apic_printk(APIC_QUIET
, KERN_INFO
2899 "..... (found apic %d pin %d) ...\n", apic2
, pin2
);
2901 * legacy devices should be connected to IO APIC #0
2903 replace_pin_at_irq_node(cfg
, node
, apic1
, pin1
, apic2
, pin2
);
2904 setup_timer_IRQ0_pin(apic2
, pin2
, cfg
->vector
);
2905 legacy_pic
->unmask(0);
2906 if (timer_irq_works()) {
2907 apic_printk(APIC_QUIET
, KERN_INFO
"....... works.\n");
2908 timer_through_8259
= 1;
2912 * Cleanup, just in case ...
2914 local_irq_disable();
2915 legacy_pic
->mask(0);
2916 clear_IO_APIC_pin(apic2
, pin2
);
2917 apic_printk(APIC_QUIET
, KERN_INFO
"....... failed.\n");
2920 apic_printk(APIC_QUIET
, KERN_INFO
2921 "...trying to set up timer as Virtual Wire IRQ...\n");
2923 lapic_register_intr(0);
2924 apic_write(APIC_LVT0
, APIC_DM_FIXED
| cfg
->vector
); /* Fixed mode */
2925 legacy_pic
->unmask(0);
2927 if (timer_irq_works()) {
2928 apic_printk(APIC_QUIET
, KERN_INFO
"..... works.\n");
2931 local_irq_disable();
2932 legacy_pic
->mask(0);
2933 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_FIXED
| cfg
->vector
);
2934 apic_printk(APIC_QUIET
, KERN_INFO
"..... failed.\n");
2936 apic_printk(APIC_QUIET
, KERN_INFO
2937 "...trying to set up timer as ExtINT IRQ...\n");
2939 legacy_pic
->init(0);
2940 legacy_pic
->make_irq(0);
2941 apic_write(APIC_LVT0
, APIC_DM_EXTINT
);
2943 unlock_ExtINT_logic();
2945 if (timer_irq_works()) {
2946 apic_printk(APIC_QUIET
, KERN_INFO
"..... works.\n");
2949 local_irq_disable();
2950 apic_printk(APIC_QUIET
, KERN_INFO
"..... failed :(.\n");
2951 if (x2apic_preenabled
)
2952 apic_printk(APIC_QUIET
, KERN_INFO
2953 "Perhaps problem with the pre-enabled x2apic mode\n"
2954 "Try booting with x2apic and interrupt-remapping disabled in the bios.\n");
2955 panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
2956 "report. Then try booting with the 'noapic' option.\n");
2958 local_irq_restore(flags
);
2962 * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
2963 * to devices. However there may be an I/O APIC pin available for
2964 * this interrupt regardless. The pin may be left unconnected, but
2965 * typically it will be reused as an ExtINT cascade interrupt for
2966 * the master 8259A. In the MPS case such a pin will normally be
2967 * reported as an ExtINT interrupt in the MP table. With ACPI
2968 * there is no provision for ExtINT interrupts, and in the absence
2969 * of an override it would be treated as an ordinary ISA I/O APIC
2970 * interrupt, that is edge-triggered and unmasked by default. We
2971 * used to do this, but it caused problems on some systems because
2972 * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
2973 * the same ExtINT cascade interrupt to drive the local APIC of the
2974 * bootstrap processor. Therefore we refrain from routing IRQ2 to
2975 * the I/O APIC in all cases now. No actual device should request
2976 * it anyway. --macro
2978 #define PIC_IRQS (1UL << PIC_CASCADE_IR)
2980 void __init
setup_IO_APIC(void)
2984 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
2986 io_apic_irqs
= legacy_pic
->nr_legacy_irqs
? ~PIC_IRQS
: ~0UL;
2988 apic_printk(APIC_VERBOSE
, "ENABLING IO-APIC IRQs\n");
2990 * Set up IO-APIC IRQ routing.
2992 x86_init
.mpparse
.setup_ioapic_ids();
2995 setup_IO_APIC_irqs();
2996 init_IO_APIC_traps();
2997 if (legacy_pic
->nr_legacy_irqs
)
3002 * Called after all the initialization is done. If we didn't find any
3003 * APIC bugs then we can allow the modify fast path
3006 static int __init
io_apic_bug_finalize(void)
3008 if (sis_apic_bug
== -1)
3013 late_initcall(io_apic_bug_finalize
);
3015 static void resume_ioapic_id(int ioapic_idx
)
3017 unsigned long flags
;
3018 union IO_APIC_reg_00 reg_00
;
3020 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3021 reg_00
.raw
= io_apic_read(ioapic_idx
, 0);
3022 if (reg_00
.bits
.ID
!= mpc_ioapic_id(ioapic_idx
)) {
3023 reg_00
.bits
.ID
= mpc_ioapic_id(ioapic_idx
);
3024 io_apic_write(ioapic_idx
, 0, reg_00
.raw
);
3026 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3029 static void ioapic_resume(void)
3033 for (ioapic_idx
= nr_ioapics
- 1; ioapic_idx
>= 0; ioapic_idx
--)
3034 resume_ioapic_id(ioapic_idx
);
3036 restore_ioapic_entries();
3039 static struct syscore_ops ioapic_syscore_ops
= {
3040 .suspend
= save_ioapic_entries
,
3041 .resume
= ioapic_resume
,
3044 static int __init
ioapic_init_ops(void)
3046 register_syscore_ops(&ioapic_syscore_ops
);
3051 device_initcall(ioapic_init_ops
);
3054 * Dynamic irq allocate and deallocation
3056 unsigned int create_irq_nr(unsigned int from
, int node
)
3058 struct irq_cfg
*cfg
;
3059 unsigned long flags
;
3060 unsigned int ret
= 0;
3063 if (from
< nr_irqs_gsi
)
3066 irq
= alloc_irq_from(from
, node
);
3069 cfg
= alloc_irq_cfg(irq
, node
);
3071 free_irq_at(irq
, NULL
);
3075 raw_spin_lock_irqsave(&vector_lock
, flags
);
3076 if (!__assign_irq_vector(irq
, cfg
, apic
->target_cpus()))
3078 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
3081 irq_set_chip_data(irq
, cfg
);
3082 irq_clear_status_flags(irq
, IRQ_NOREQUEST
);
3084 free_irq_at(irq
, cfg
);
3089 int create_irq(void)
3091 int node
= cpu_to_node(0);
3092 unsigned int irq_want
;
3095 irq_want
= nr_irqs_gsi
;
3096 irq
= create_irq_nr(irq_want
, node
);
3104 void destroy_irq(unsigned int irq
)
3106 struct irq_cfg
*cfg
= irq_get_chip_data(irq
);
3107 unsigned long flags
;
3109 irq_set_status_flags(irq
, IRQ_NOREQUEST
|IRQ_NOPROBE
);
3111 if (irq_remapped(cfg
))
3113 raw_spin_lock_irqsave(&vector_lock
, flags
);
3114 __clear_irq_vector(irq
, cfg
);
3115 raw_spin_unlock_irqrestore(&vector_lock
, flags
);
3116 free_irq_at(irq
, cfg
);
3120 * MSI message composition
3122 #ifdef CONFIG_PCI_MSI
3123 static int msi_compose_msg(struct pci_dev
*pdev
, unsigned int irq
,
3124 struct msi_msg
*msg
, u8 hpet_id
)
3126 struct irq_cfg
*cfg
;
3134 err
= assign_irq_vector(irq
, cfg
, apic
->target_cpus());
3138 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
, apic
->target_cpus());
3140 if (irq_remapped(cfg
)) {
3145 ir_index
= map_irq_to_irte_handle(irq
, &sub_handle
);
3146 BUG_ON(ir_index
== -1);
3148 prepare_irte(&irte
, cfg
->vector
, dest
);
3150 /* Set source-id of interrupt request */
3152 set_msi_sid(&irte
, pdev
);
3154 set_hpet_sid(&irte
, hpet_id
);
3156 modify_irte(irq
, &irte
);
3158 msg
->address_hi
= MSI_ADDR_BASE_HI
;
3159 msg
->data
= sub_handle
;
3160 msg
->address_lo
= MSI_ADDR_BASE_LO
| MSI_ADDR_IR_EXT_INT
|
3162 MSI_ADDR_IR_INDEX1(ir_index
) |
3163 MSI_ADDR_IR_INDEX2(ir_index
);
3165 if (x2apic_enabled())
3166 msg
->address_hi
= MSI_ADDR_BASE_HI
|
3167 MSI_ADDR_EXT_DEST_ID(dest
);
3169 msg
->address_hi
= MSI_ADDR_BASE_HI
;
3173 ((apic
->irq_dest_mode
== 0) ?
3174 MSI_ADDR_DEST_MODE_PHYSICAL
:
3175 MSI_ADDR_DEST_MODE_LOGICAL
) |
3176 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3177 MSI_ADDR_REDIRECTION_CPU
:
3178 MSI_ADDR_REDIRECTION_LOWPRI
) |
3179 MSI_ADDR_DEST_ID(dest
);
3182 MSI_DATA_TRIGGER_EDGE
|
3183 MSI_DATA_LEVEL_ASSERT
|
3184 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3185 MSI_DATA_DELIVERY_FIXED
:
3186 MSI_DATA_DELIVERY_LOWPRI
) |
3187 MSI_DATA_VECTOR(cfg
->vector
);
3194 msi_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
, bool force
)
3196 struct irq_cfg
*cfg
= data
->chip_data
;
3200 if (__ioapic_set_affinity(data
, mask
, &dest
))
3203 __get_cached_msi_msg(data
->msi_desc
, &msg
);
3205 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3206 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3207 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3208 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3210 __write_msi_msg(data
->msi_desc
, &msg
);
3214 #endif /* CONFIG_SMP */
3217 * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
3218 * which implement the MSI or MSI-X Capability Structure.
3220 static struct irq_chip msi_chip
= {
3222 .irq_unmask
= unmask_msi_irq
,
3223 .irq_mask
= mask_msi_irq
,
3224 .irq_ack
= ack_apic_edge
,
3226 .irq_set_affinity
= msi_set_affinity
,
3228 .irq_retrigger
= ioapic_retrigger_irq
,
3232 * Map the PCI dev to the corresponding remapping hardware unit
3233 * and allocate 'nvec' consecutive interrupt-remapping table entries
3236 static int msi_alloc_irte(struct pci_dev
*dev
, int irq
, int nvec
)
3238 struct intel_iommu
*iommu
;
3241 iommu
= map_dev_to_ir(dev
);
3244 "Unable to map PCI %s to iommu\n", pci_name(dev
));
3248 index
= alloc_irte(iommu
, irq
, nvec
);
3251 "Unable to allocate %d IRTE for PCI %s\n", nvec
,
3258 static int setup_msi_irq(struct pci_dev
*dev
, struct msi_desc
*msidesc
, int irq
)
3260 struct irq_chip
*chip
= &msi_chip
;
3264 ret
= msi_compose_msg(dev
, irq
, &msg
, -1);
3268 irq_set_msi_desc(irq
, msidesc
);
3269 write_msi_msg(irq
, &msg
);
3271 if (irq_remapped(irq_get_chip_data(irq
))) {
3272 irq_set_status_flags(irq
, IRQ_MOVE_PCNTXT
);
3273 irq_remap_modify_chip_defaults(chip
);
3276 irq_set_chip_and_handler_name(irq
, chip
, handle_edge_irq
, "edge");
3278 dev_printk(KERN_DEBUG
, &dev
->dev
, "irq %d for MSI/MSI-X\n", irq
);
3283 int native_setup_msi_irqs(struct pci_dev
*dev
, int nvec
, int type
)
3285 int node
, ret
, sub_handle
, index
= 0;
3286 unsigned int irq
, irq_want
;
3287 struct msi_desc
*msidesc
;
3288 struct intel_iommu
*iommu
= NULL
;
3290 /* x86 doesn't support multiple MSI yet */
3291 if (type
== PCI_CAP_ID_MSI
&& nvec
> 1)
3294 node
= dev_to_node(&dev
->dev
);
3295 irq_want
= nr_irqs_gsi
;
3297 list_for_each_entry(msidesc
, &dev
->msi_list
, list
) {
3298 irq
= create_irq_nr(irq_want
, node
);
3302 if (!intr_remapping_enabled
)
3307 * allocate the consecutive block of IRTE's
3310 index
= msi_alloc_irte(dev
, irq
, nvec
);
3316 iommu
= map_dev_to_ir(dev
);
3322 * setup the mapping between the irq and the IRTE
3323 * base index, the sub_handle pointing to the
3324 * appropriate interrupt remap table entry.
3326 set_irte_irq(irq
, iommu
, index
, sub_handle
);
3329 ret
= setup_msi_irq(dev
, msidesc
, irq
);
3341 void native_teardown_msi_irq(unsigned int irq
)
3346 #ifdef CONFIG_DMAR_TABLE
3349 dmar_msi_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
,
3352 struct irq_cfg
*cfg
= data
->chip_data
;
3353 unsigned int dest
, irq
= data
->irq
;
3356 if (__ioapic_set_affinity(data
, mask
, &dest
))
3359 dmar_msi_read(irq
, &msg
);
3361 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3362 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3363 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3364 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3365 msg
.address_hi
= MSI_ADDR_BASE_HI
| MSI_ADDR_EXT_DEST_ID(dest
);
3367 dmar_msi_write(irq
, &msg
);
3372 #endif /* CONFIG_SMP */
3374 static struct irq_chip dmar_msi_type
= {
3376 .irq_unmask
= dmar_msi_unmask
,
3377 .irq_mask
= dmar_msi_mask
,
3378 .irq_ack
= ack_apic_edge
,
3380 .irq_set_affinity
= dmar_msi_set_affinity
,
3382 .irq_retrigger
= ioapic_retrigger_irq
,
3385 int arch_setup_dmar_msi(unsigned int irq
)
3390 ret
= msi_compose_msg(NULL
, irq
, &msg
, -1);
3393 dmar_msi_write(irq
, &msg
);
3394 irq_set_chip_and_handler_name(irq
, &dmar_msi_type
, handle_edge_irq
,
3400 #ifdef CONFIG_HPET_TIMER
3403 static int hpet_msi_set_affinity(struct irq_data
*data
,
3404 const struct cpumask
*mask
, bool force
)
3406 struct irq_cfg
*cfg
= data
->chip_data
;
3410 if (__ioapic_set_affinity(data
, mask
, &dest
))
3413 hpet_msi_read(data
->handler_data
, &msg
);
3415 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
3416 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
3417 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
3418 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
3420 hpet_msi_write(data
->handler_data
, &msg
);
3425 #endif /* CONFIG_SMP */
3427 static struct irq_chip hpet_msi_type
= {
3429 .irq_unmask
= hpet_msi_unmask
,
3430 .irq_mask
= hpet_msi_mask
,
3431 .irq_ack
= ack_apic_edge
,
3433 .irq_set_affinity
= hpet_msi_set_affinity
,
3435 .irq_retrigger
= ioapic_retrigger_irq
,
3438 int arch_setup_hpet_msi(unsigned int irq
, unsigned int id
)
3440 struct irq_chip
*chip
= &hpet_msi_type
;
3444 if (intr_remapping_enabled
) {
3445 struct intel_iommu
*iommu
= map_hpet_to_ir(id
);
3451 index
= alloc_irte(iommu
, irq
, 1);
3456 ret
= msi_compose_msg(NULL
, irq
, &msg
, id
);
3460 hpet_msi_write(irq_get_handler_data(irq
), &msg
);
3461 irq_set_status_flags(irq
, IRQ_MOVE_PCNTXT
);
3462 if (irq_remapped(irq_get_chip_data(irq
)))
3463 irq_remap_modify_chip_defaults(chip
);
3465 irq_set_chip_and_handler_name(irq
, chip
, handle_edge_irq
, "edge");
3470 #endif /* CONFIG_PCI_MSI */
3472 * Hypertransport interrupt support
3474 #ifdef CONFIG_HT_IRQ
3478 static void target_ht_irq(unsigned int irq
, unsigned int dest
, u8 vector
)
3480 struct ht_irq_msg msg
;
3481 fetch_ht_irq_msg(irq
, &msg
);
3483 msg
.address_lo
&= ~(HT_IRQ_LOW_VECTOR_MASK
| HT_IRQ_LOW_DEST_ID_MASK
);
3484 msg
.address_hi
&= ~(HT_IRQ_HIGH_DEST_ID_MASK
);
3486 msg
.address_lo
|= HT_IRQ_LOW_VECTOR(vector
) | HT_IRQ_LOW_DEST_ID(dest
);
3487 msg
.address_hi
|= HT_IRQ_HIGH_DEST_ID(dest
);
3489 write_ht_irq_msg(irq
, &msg
);
3493 ht_set_affinity(struct irq_data
*data
, const struct cpumask
*mask
, bool force
)
3495 struct irq_cfg
*cfg
= data
->chip_data
;
3498 if (__ioapic_set_affinity(data
, mask
, &dest
))
3501 target_ht_irq(data
->irq
, dest
, cfg
->vector
);
3507 static struct irq_chip ht_irq_chip
= {
3509 .irq_mask
= mask_ht_irq
,
3510 .irq_unmask
= unmask_ht_irq
,
3511 .irq_ack
= ack_apic_edge
,
3513 .irq_set_affinity
= ht_set_affinity
,
3515 .irq_retrigger
= ioapic_retrigger_irq
,
3518 int arch_setup_ht_irq(unsigned int irq
, struct pci_dev
*dev
)
3520 struct irq_cfg
*cfg
;
3527 err
= assign_irq_vector(irq
, cfg
, apic
->target_cpus());
3529 struct ht_irq_msg msg
;
3532 dest
= apic
->cpu_mask_to_apicid_and(cfg
->domain
,
3533 apic
->target_cpus());
3535 msg
.address_hi
= HT_IRQ_HIGH_DEST_ID(dest
);
3539 HT_IRQ_LOW_DEST_ID(dest
) |
3540 HT_IRQ_LOW_VECTOR(cfg
->vector
) |
3541 ((apic
->irq_dest_mode
== 0) ?
3542 HT_IRQ_LOW_DM_PHYSICAL
:
3543 HT_IRQ_LOW_DM_LOGICAL
) |
3544 HT_IRQ_LOW_RQEOI_EDGE
|
3545 ((apic
->irq_delivery_mode
!= dest_LowestPrio
) ?
3546 HT_IRQ_LOW_MT_FIXED
:
3547 HT_IRQ_LOW_MT_ARBITRATED
) |
3548 HT_IRQ_LOW_IRQ_MASKED
;
3550 write_ht_irq_msg(irq
, &msg
);
3552 irq_set_chip_and_handler_name(irq
, &ht_irq_chip
,
3553 handle_edge_irq
, "edge");
3555 dev_printk(KERN_DEBUG
, &dev
->dev
, "irq %d for HT\n", irq
);
3559 #endif /* CONFIG_HT_IRQ */
3562 io_apic_setup_irq_pin(unsigned int irq
, int node
, struct io_apic_irq_attr
*attr
)
3564 struct irq_cfg
*cfg
= alloc_irq_and_cfg_at(irq
, node
);
3569 ret
= __add_pin_to_irq_node(cfg
, node
, attr
->ioapic
, attr
->ioapic_pin
);
3571 setup_ioapic_irq(irq
, cfg
, attr
);
3575 int io_apic_setup_irq_pin_once(unsigned int irq
, int node
,
3576 struct io_apic_irq_attr
*attr
)
3578 unsigned int ioapic_idx
= attr
->ioapic
, pin
= attr
->ioapic_pin
;
3581 /* Avoid redundant programming */
3582 if (test_bit(pin
, ioapics
[ioapic_idx
].pin_programmed
)) {
3583 pr_debug("Pin %d-%d already programmed\n",
3584 mpc_ioapic_id(ioapic_idx
), pin
);
3587 ret
= io_apic_setup_irq_pin(irq
, node
, attr
);
3589 set_bit(pin
, ioapics
[ioapic_idx
].pin_programmed
);
3593 static int __init
io_apic_get_redir_entries(int ioapic
)
3595 union IO_APIC_reg_01 reg_01
;
3596 unsigned long flags
;
3598 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3599 reg_01
.raw
= io_apic_read(ioapic
, 1);
3600 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3602 /* The register returns the maximum index redir index
3603 * supported, which is one less than the total number of redir
3606 return reg_01
.bits
.entries
+ 1;
3609 static void __init
probe_nr_irqs_gsi(void)
3613 nr
= gsi_top
+ NR_IRQS_LEGACY
;
3614 if (nr
> nr_irqs_gsi
)
3617 printk(KERN_DEBUG
"nr_irqs_gsi: %d\n", nr_irqs_gsi
);
3620 int get_nr_irqs_gsi(void)
3625 int __init
arch_probe_nr_irqs(void)
3629 if (nr_irqs
> (NR_VECTORS
* nr_cpu_ids
))
3630 nr_irqs
= NR_VECTORS
* nr_cpu_ids
;
3632 nr
= nr_irqs_gsi
+ 8 * nr_cpu_ids
;
3633 #if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
3635 * for MSI and HT dyn irq
3637 nr
+= nr_irqs_gsi
* 16;
3642 return NR_IRQS_LEGACY
;
3645 int io_apic_set_pci_routing(struct device
*dev
, int irq
,
3646 struct io_apic_irq_attr
*irq_attr
)
3650 if (!IO_APIC_IRQ(irq
)) {
3651 apic_printk(APIC_QUIET
,KERN_ERR
"IOAPIC[%d]: Invalid reference to IRQ 0\n",
3656 node
= dev
? dev_to_node(dev
) : cpu_to_node(0);
3658 return io_apic_setup_irq_pin_once(irq
, node
, irq_attr
);
3661 #ifdef CONFIG_X86_32
3662 static int __init
io_apic_get_unique_id(int ioapic
, int apic_id
)
3664 union IO_APIC_reg_00 reg_00
;
3665 static physid_mask_t apic_id_map
= PHYSID_MASK_NONE
;
3667 unsigned long flags
;
3671 * The P4 platform supports up to 256 APIC IDs on two separate APIC
3672 * buses (one for LAPICs, one for IOAPICs), where predecessors only
3673 * supports up to 16 on one shared APIC bus.
3675 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
3676 * advantage of new APIC bus architecture.
3679 if (physids_empty(apic_id_map
))
3680 apic
->ioapic_phys_id_map(&phys_cpu_present_map
, &apic_id_map
);
3682 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3683 reg_00
.raw
= io_apic_read(ioapic
, 0);
3684 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3686 if (apic_id
>= get_physical_broadcast()) {
3687 printk(KERN_WARNING
"IOAPIC[%d]: Invalid apic_id %d, trying "
3688 "%d\n", ioapic
, apic_id
, reg_00
.bits
.ID
);
3689 apic_id
= reg_00
.bits
.ID
;
3693 * Every APIC in a system must have a unique ID or we get lots of nice
3694 * 'stuck on smp_invalidate_needed IPI wait' messages.
3696 if (apic
->check_apicid_used(&apic_id_map
, apic_id
)) {
3698 for (i
= 0; i
< get_physical_broadcast(); i
++) {
3699 if (!apic
->check_apicid_used(&apic_id_map
, i
))
3703 if (i
== get_physical_broadcast())
3704 panic("Max apic_id exceeded!\n");
3706 printk(KERN_WARNING
"IOAPIC[%d]: apic_id %d already used, "
3707 "trying %d\n", ioapic
, apic_id
, i
);
3712 apic
->apicid_to_cpu_present(apic_id
, &tmp
);
3713 physids_or(apic_id_map
, apic_id_map
, tmp
);
3715 if (reg_00
.bits
.ID
!= apic_id
) {
3716 reg_00
.bits
.ID
= apic_id
;
3718 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3719 io_apic_write(ioapic
, 0, reg_00
.raw
);
3720 reg_00
.raw
= io_apic_read(ioapic
, 0);
3721 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3724 if (reg_00
.bits
.ID
!= apic_id
) {
3725 printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic
);
3730 apic_printk(APIC_VERBOSE
, KERN_INFO
3731 "IOAPIC[%d]: Assigned apic_id %d\n", ioapic
, apic_id
);
3736 static u8 __init
io_apic_unique_id(u8 id
)
3738 if ((boot_cpu_data
.x86_vendor
== X86_VENDOR_INTEL
) &&
3739 !APIC_XAPIC(apic_version
[boot_cpu_physical_apicid
]))
3740 return io_apic_get_unique_id(nr_ioapics
, id
);
3745 static u8 __init
io_apic_unique_id(u8 id
)
3748 DECLARE_BITMAP(used
, 256);
3750 bitmap_zero(used
, 256);
3751 for (i
= 0; i
< nr_ioapics
; i
++) {
3752 __set_bit(mpc_ioapic_id(i
), used
);
3754 if (!test_bit(id
, used
))
3756 return find_first_zero_bit(used
, 256);
3760 static int __init
io_apic_get_version(int ioapic
)
3762 union IO_APIC_reg_01 reg_01
;
3763 unsigned long flags
;
3765 raw_spin_lock_irqsave(&ioapic_lock
, flags
);
3766 reg_01
.raw
= io_apic_read(ioapic
, 1);
3767 raw_spin_unlock_irqrestore(&ioapic_lock
, flags
);
3769 return reg_01
.bits
.version
;
3772 int acpi_get_override_irq(u32 gsi
, int *trigger
, int *polarity
)
3774 int ioapic
, pin
, idx
;
3776 if (skip_ioapic_setup
)
3779 ioapic
= mp_find_ioapic(gsi
);
3783 pin
= mp_find_ioapic_pin(ioapic
, gsi
);
3787 idx
= find_irq_entry(ioapic
, pin
, mp_INT
);
3791 *trigger
= irq_trigger(idx
);
3792 *polarity
= irq_polarity(idx
);
3797 * This function currently is only a helper for the i386 smp boot process where
3798 * we need to reprogram the ioredtbls to cater for the cpus which have come online
3799 * so mask in all cases should simply be apic->target_cpus()
3802 void __init
setup_ioapic_dest(void)
3804 int pin
, ioapic
, irq
, irq_entry
;
3805 const struct cpumask
*mask
;
3806 struct irq_data
*idata
;
3808 if (skip_ioapic_setup
== 1)
3811 for (ioapic
= 0; ioapic
< nr_ioapics
; ioapic
++)
3812 for (pin
= 0; pin
< ioapics
[ioapic
].nr_registers
; pin
++) {
3813 irq_entry
= find_irq_entry(ioapic
, pin
, mp_INT
);
3814 if (irq_entry
== -1)
3816 irq
= pin_2_irq(irq_entry
, ioapic
, pin
);
3818 if ((ioapic
> 0) && (irq
> 16))
3821 idata
= irq_get_irq_data(irq
);
3824 * Honour affinities which have been set in early boot
3826 if (!irqd_can_balance(idata
) || irqd_affinity_was_set(idata
))
3827 mask
= idata
->affinity
;
3829 mask
= apic
->target_cpus();
3831 if (intr_remapping_enabled
)
3832 ir_ioapic_set_affinity(idata
, mask
, false);
3834 ioapic_set_affinity(idata
, mask
, false);
3840 #define IOAPIC_RESOURCE_NAME_SIZE 11
3842 static struct resource
*ioapic_resources
;
3844 static struct resource
* __init
ioapic_setup_resources(int nr_ioapics
)
3847 struct resource
*res
;
3851 if (nr_ioapics
<= 0)
3854 n
= IOAPIC_RESOURCE_NAME_SIZE
+ sizeof(struct resource
);
3857 mem
= alloc_bootmem(n
);
3860 mem
+= sizeof(struct resource
) * nr_ioapics
;
3862 for (i
= 0; i
< nr_ioapics
; i
++) {
3864 res
[i
].flags
= IORESOURCE_MEM
| IORESOURCE_BUSY
;
3865 snprintf(mem
, IOAPIC_RESOURCE_NAME_SIZE
, "IOAPIC %u", i
);
3866 mem
+= IOAPIC_RESOURCE_NAME_SIZE
;
3869 ioapic_resources
= res
;
3874 void __init
ioapic_and_gsi_init(void)
3876 unsigned long ioapic_phys
, idx
= FIX_IO_APIC_BASE_0
;
3877 struct resource
*ioapic_res
;
3880 ioapic_res
= ioapic_setup_resources(nr_ioapics
);
3881 for (i
= 0; i
< nr_ioapics
; i
++) {
3882 if (smp_found_config
) {
3883 ioapic_phys
= mpc_ioapic_addr(i
);
3884 #ifdef CONFIG_X86_32
3887 "WARNING: bogus zero IO-APIC "
3888 "address found in MPTABLE, "
3889 "disabling IO/APIC support!\n");
3890 smp_found_config
= 0;
3891 skip_ioapic_setup
= 1;
3892 goto fake_ioapic_page
;
3896 #ifdef CONFIG_X86_32
3899 ioapic_phys
= (unsigned long)alloc_bootmem_pages(PAGE_SIZE
);
3900 ioapic_phys
= __pa(ioapic_phys
);
3902 set_fixmap_nocache(idx
, ioapic_phys
);
3903 apic_printk(APIC_VERBOSE
, "mapped IOAPIC to %08lx (%08lx)\n",
3904 __fix_to_virt(idx
) + (ioapic_phys
& ~PAGE_MASK
),
3908 ioapic_res
->start
= ioapic_phys
;
3909 ioapic_res
->end
= ioapic_phys
+ IO_APIC_SLOT_SIZE
- 1;
3913 probe_nr_irqs_gsi();
3916 void __init
ioapic_insert_resources(void)
3919 struct resource
*r
= ioapic_resources
;
3924 "IO APIC resources couldn't be allocated.\n");
3928 for (i
= 0; i
< nr_ioapics
; i
++) {
3929 insert_resource(&iomem_resource
, r
);
3934 int mp_find_ioapic(u32 gsi
)
3938 if (nr_ioapics
== 0)
3941 /* Find the IOAPIC that manages this GSI. */
3942 for (i
= 0; i
< nr_ioapics
; i
++) {
3943 struct mp_ioapic_gsi
*gsi_cfg
= mp_ioapic_gsi_routing(i
);
3944 if ((gsi
>= gsi_cfg
->gsi_base
)
3945 && (gsi
<= gsi_cfg
->gsi_end
))
3949 printk(KERN_ERR
"ERROR: Unable to locate IOAPIC for GSI %d\n", gsi
);
3953 int mp_find_ioapic_pin(int ioapic
, u32 gsi
)
3955 struct mp_ioapic_gsi
*gsi_cfg
;
3957 if (WARN_ON(ioapic
== -1))
3960 gsi_cfg
= mp_ioapic_gsi_routing(ioapic
);
3961 if (WARN_ON(gsi
> gsi_cfg
->gsi_end
))
3964 return gsi
- gsi_cfg
->gsi_base
;
3967 static __init
int bad_ioapic(unsigned long address
)
3969 if (nr_ioapics
>= MAX_IO_APICS
) {
3970 printk(KERN_WARNING
"WARNING: Max # of I/O APICs (%d) exceeded "
3971 "(found %d), skipping\n", MAX_IO_APICS
, nr_ioapics
);
3975 printk(KERN_WARNING
"WARNING: Bogus (zero) I/O APIC address"
3976 " found in table, skipping!\n");
3982 void __init
mp_register_ioapic(int id
, u32 address
, u32 gsi_base
)
3986 struct mp_ioapic_gsi
*gsi_cfg
;
3988 if (bad_ioapic(address
))
3993 ioapics
[idx
].mp_config
.type
= MP_IOAPIC
;
3994 ioapics
[idx
].mp_config
.flags
= MPC_APIC_USABLE
;
3995 ioapics
[idx
].mp_config
.apicaddr
= address
;
3997 set_fixmap_nocache(FIX_IO_APIC_BASE_0
+ idx
, address
);
3998 ioapics
[idx
].mp_config
.apicid
= io_apic_unique_id(id
);
3999 ioapics
[idx
].mp_config
.apicver
= io_apic_get_version(idx
);
4002 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
4003 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
4005 entries
= io_apic_get_redir_entries(idx
);
4006 gsi_cfg
= mp_ioapic_gsi_routing(idx
);
4007 gsi_cfg
->gsi_base
= gsi_base
;
4008 gsi_cfg
->gsi_end
= gsi_base
+ entries
- 1;
4011 * The number of IO-APIC IRQ registers (== #pins):
4013 ioapics
[idx
].nr_registers
= entries
;
4015 if (gsi_cfg
->gsi_end
>= gsi_top
)
4016 gsi_top
= gsi_cfg
->gsi_end
+ 1;
4018 printk(KERN_INFO
"IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
4019 "GSI %d-%d\n", idx
, mpc_ioapic_id(idx
),
4020 mpc_ioapic_ver(idx
), mpc_ioapic_addr(idx
),
4021 gsi_cfg
->gsi_base
, gsi_cfg
->gsi_end
);
4026 /* Enable IOAPIC early just for system timer */
4027 void __init
pre_init_apic_IRQ0(void)
4029 struct io_apic_irq_attr attr
= { 0, 0, 0, 0 };
4031 printk(KERN_INFO
"Early APIC setup for system timer0\n");
4033 physid_set_mask_of_physid(boot_cpu_physical_apicid
,
4034 &phys_cpu_present_map
);
4038 io_apic_setup_irq_pin(0, 0, &attr
);
4039 irq_set_chip_and_handler_name(0, &ioapic_chip
, handle_edge_irq
,