spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / arch / x86 / kernel / kgdb.c
blob2f45c4c0b9db365bbb16688b2afd6a0118102179
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License as published by the
4 * Free Software Foundation; either version 2, or (at your option) any
5 * later version.
7 * This program is distributed in the hope that it will be useful, but
8 * WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
10 * General Public License for more details.
15 * Copyright (C) 2004 Amit S. Kale <amitkale@linsyssoft.com>
16 * Copyright (C) 2000-2001 VERITAS Software Corporation.
17 * Copyright (C) 2002 Andi Kleen, SuSE Labs
18 * Copyright (C) 2004 LinSysSoft Technologies Pvt. Ltd.
19 * Copyright (C) 2007 MontaVista Software, Inc.
20 * Copyright (C) 2007-2008 Jason Wessel, Wind River Systems, Inc.
22 /****************************************************************************
23 * Contributor: Lake Stevens Instrument Division$
24 * Written by: Glenn Engel $
25 * Updated by: Amit Kale<akale@veritas.com>
26 * Updated by: Tom Rini <trini@kernel.crashing.org>
27 * Updated by: Jason Wessel <jason.wessel@windriver.com>
28 * Modified for 386 by Jim Kingdon, Cygnus Support.
29 * Origianl kgdb, compatibility with 2.1.xx kernel by
30 * David Grothe <dave@gcom.com>
31 * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com>
32 * X86_64 changes from Andi Kleen's patch merged by Jim Houston
34 #include <linux/spinlock.h>
35 #include <linux/kdebug.h>
36 #include <linux/string.h>
37 #include <linux/kernel.h>
38 #include <linux/ptrace.h>
39 #include <linux/sched.h>
40 #include <linux/delay.h>
41 #include <linux/kgdb.h>
42 #include <linux/init.h>
43 #include <linux/smp.h>
44 #include <linux/nmi.h>
45 #include <linux/hw_breakpoint.h>
46 #include <linux/uaccess.h>
47 #include <linux/memory.h>
49 #include <asm/debugreg.h>
50 #include <asm/apicdef.h>
51 #include <asm/system.h>
52 #include <asm/apic.h>
53 #include <asm/nmi.h>
55 struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
57 #ifdef CONFIG_X86_32
58 { "ax", 4, offsetof(struct pt_regs, ax) },
59 { "cx", 4, offsetof(struct pt_regs, cx) },
60 { "dx", 4, offsetof(struct pt_regs, dx) },
61 { "bx", 4, offsetof(struct pt_regs, bx) },
62 { "sp", 4, offsetof(struct pt_regs, sp) },
63 { "bp", 4, offsetof(struct pt_regs, bp) },
64 { "si", 4, offsetof(struct pt_regs, si) },
65 { "di", 4, offsetof(struct pt_regs, di) },
66 { "ip", 4, offsetof(struct pt_regs, ip) },
67 { "flags", 4, offsetof(struct pt_regs, flags) },
68 { "cs", 4, offsetof(struct pt_regs, cs) },
69 { "ss", 4, offsetof(struct pt_regs, ss) },
70 { "ds", 4, offsetof(struct pt_regs, ds) },
71 { "es", 4, offsetof(struct pt_regs, es) },
72 { "fs", 4, -1 },
73 { "gs", 4, -1 },
74 #else
75 { "ax", 8, offsetof(struct pt_regs, ax) },
76 { "bx", 8, offsetof(struct pt_regs, bx) },
77 { "cx", 8, offsetof(struct pt_regs, cx) },
78 { "dx", 8, offsetof(struct pt_regs, dx) },
79 { "si", 8, offsetof(struct pt_regs, dx) },
80 { "di", 8, offsetof(struct pt_regs, di) },
81 { "bp", 8, offsetof(struct pt_regs, bp) },
82 { "sp", 8, offsetof(struct pt_regs, sp) },
83 { "r8", 8, offsetof(struct pt_regs, r8) },
84 { "r9", 8, offsetof(struct pt_regs, r9) },
85 { "r10", 8, offsetof(struct pt_regs, r10) },
86 { "r11", 8, offsetof(struct pt_regs, r11) },
87 { "r12", 8, offsetof(struct pt_regs, r12) },
88 { "r13", 8, offsetof(struct pt_regs, r13) },
89 { "r14", 8, offsetof(struct pt_regs, r14) },
90 { "r15", 8, offsetof(struct pt_regs, r15) },
91 { "ip", 8, offsetof(struct pt_regs, ip) },
92 { "flags", 4, offsetof(struct pt_regs, flags) },
93 { "cs", 4, offsetof(struct pt_regs, cs) },
94 { "ss", 4, offsetof(struct pt_regs, ss) },
95 #endif
98 int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
100 if (
101 #ifdef CONFIG_X86_32
102 regno == GDB_SS || regno == GDB_FS || regno == GDB_GS ||
103 #endif
104 regno == GDB_SP || regno == GDB_ORIG_AX)
105 return 0;
107 if (dbg_reg_def[regno].offset != -1)
108 memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
109 dbg_reg_def[regno].size);
110 return 0;
113 char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
115 if (regno == GDB_ORIG_AX) {
116 memcpy(mem, &regs->orig_ax, sizeof(regs->orig_ax));
117 return "orig_ax";
119 if (regno >= DBG_MAX_REG_NUM || regno < 0)
120 return NULL;
122 if (dbg_reg_def[regno].offset != -1)
123 memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
124 dbg_reg_def[regno].size);
126 #ifdef CONFIG_X86_32
127 switch (regno) {
128 case GDB_SS:
129 if (!user_mode_vm(regs))
130 *(unsigned long *)mem = __KERNEL_DS;
131 break;
132 case GDB_SP:
133 if (!user_mode_vm(regs))
134 *(unsigned long *)mem = kernel_stack_pointer(regs);
135 break;
136 case GDB_GS:
137 case GDB_FS:
138 *(unsigned long *)mem = 0xFFFF;
139 break;
141 #endif
142 return dbg_reg_def[regno].name;
146 * sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
147 * @gdb_regs: A pointer to hold the registers in the order GDB wants.
148 * @p: The &struct task_struct of the desired process.
150 * Convert the register values of the sleeping process in @p to
151 * the format that GDB expects.
152 * This function is called when kgdb does not have access to the
153 * &struct pt_regs and therefore it should fill the gdb registers
154 * @gdb_regs with what has been saved in &struct thread_struct
155 * thread field during switch_to.
157 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
159 #ifndef CONFIG_X86_32
160 u32 *gdb_regs32 = (u32 *)gdb_regs;
161 #endif
162 gdb_regs[GDB_AX] = 0;
163 gdb_regs[GDB_BX] = 0;
164 gdb_regs[GDB_CX] = 0;
165 gdb_regs[GDB_DX] = 0;
166 gdb_regs[GDB_SI] = 0;
167 gdb_regs[GDB_DI] = 0;
168 gdb_regs[GDB_BP] = *(unsigned long *)p->thread.sp;
169 #ifdef CONFIG_X86_32
170 gdb_regs[GDB_DS] = __KERNEL_DS;
171 gdb_regs[GDB_ES] = __KERNEL_DS;
172 gdb_regs[GDB_PS] = 0;
173 gdb_regs[GDB_CS] = __KERNEL_CS;
174 gdb_regs[GDB_PC] = p->thread.ip;
175 gdb_regs[GDB_SS] = __KERNEL_DS;
176 gdb_regs[GDB_FS] = 0xFFFF;
177 gdb_regs[GDB_GS] = 0xFFFF;
178 #else
179 gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
180 gdb_regs32[GDB_CS] = __KERNEL_CS;
181 gdb_regs32[GDB_SS] = __KERNEL_DS;
182 gdb_regs[GDB_PC] = 0;
183 gdb_regs[GDB_R8] = 0;
184 gdb_regs[GDB_R9] = 0;
185 gdb_regs[GDB_R10] = 0;
186 gdb_regs[GDB_R11] = 0;
187 gdb_regs[GDB_R12] = 0;
188 gdb_regs[GDB_R13] = 0;
189 gdb_regs[GDB_R14] = 0;
190 gdb_regs[GDB_R15] = 0;
191 #endif
192 gdb_regs[GDB_SP] = p->thread.sp;
195 static struct hw_breakpoint {
196 unsigned enabled;
197 unsigned long addr;
198 int len;
199 int type;
200 struct perf_event * __percpu *pev;
201 } breakinfo[HBP_NUM];
203 static unsigned long early_dr7;
205 static void kgdb_correct_hw_break(void)
207 int breakno;
209 for (breakno = 0; breakno < HBP_NUM; breakno++) {
210 struct perf_event *bp;
211 struct arch_hw_breakpoint *info;
212 int val;
213 int cpu = raw_smp_processor_id();
214 if (!breakinfo[breakno].enabled)
215 continue;
216 if (dbg_is_early) {
217 set_debugreg(breakinfo[breakno].addr, breakno);
218 early_dr7 |= encode_dr7(breakno,
219 breakinfo[breakno].len,
220 breakinfo[breakno].type);
221 set_debugreg(early_dr7, 7);
222 continue;
224 bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu);
225 info = counter_arch_bp(bp);
226 if (bp->attr.disabled != 1)
227 continue;
228 bp->attr.bp_addr = breakinfo[breakno].addr;
229 bp->attr.bp_len = breakinfo[breakno].len;
230 bp->attr.bp_type = breakinfo[breakno].type;
231 info->address = breakinfo[breakno].addr;
232 info->len = breakinfo[breakno].len;
233 info->type = breakinfo[breakno].type;
234 val = arch_install_hw_breakpoint(bp);
235 if (!val)
236 bp->attr.disabled = 0;
238 if (!dbg_is_early)
239 hw_breakpoint_restore();
242 static int hw_break_reserve_slot(int breakno)
244 int cpu;
245 int cnt = 0;
246 struct perf_event **pevent;
248 if (dbg_is_early)
249 return 0;
251 for_each_online_cpu(cpu) {
252 cnt++;
253 pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
254 if (dbg_reserve_bp_slot(*pevent))
255 goto fail;
258 return 0;
260 fail:
261 for_each_online_cpu(cpu) {
262 cnt--;
263 if (!cnt)
264 break;
265 pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
266 dbg_release_bp_slot(*pevent);
268 return -1;
271 static int hw_break_release_slot(int breakno)
273 struct perf_event **pevent;
274 int cpu;
276 if (dbg_is_early)
277 return 0;
279 for_each_online_cpu(cpu) {
280 pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
281 if (dbg_release_bp_slot(*pevent))
283 * The debugger is responsible for handing the retry on
284 * remove failure.
286 return -1;
288 return 0;
291 static int
292 kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
294 int i;
296 for (i = 0; i < HBP_NUM; i++)
297 if (breakinfo[i].addr == addr && breakinfo[i].enabled)
298 break;
299 if (i == HBP_NUM)
300 return -1;
302 if (hw_break_release_slot(i)) {
303 printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr);
304 return -1;
306 breakinfo[i].enabled = 0;
308 return 0;
311 static void kgdb_remove_all_hw_break(void)
313 int i;
314 int cpu = raw_smp_processor_id();
315 struct perf_event *bp;
317 for (i = 0; i < HBP_NUM; i++) {
318 if (!breakinfo[i].enabled)
319 continue;
320 bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
321 if (!bp->attr.disabled) {
322 arch_uninstall_hw_breakpoint(bp);
323 bp->attr.disabled = 1;
324 continue;
326 if (dbg_is_early)
327 early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
328 breakinfo[i].type);
329 else if (hw_break_release_slot(i))
330 printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n",
331 breakinfo[i].addr);
332 breakinfo[i].enabled = 0;
336 static int
337 kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
339 int i;
341 for (i = 0; i < HBP_NUM; i++)
342 if (!breakinfo[i].enabled)
343 break;
344 if (i == HBP_NUM)
345 return -1;
347 switch (bptype) {
348 case BP_HARDWARE_BREAKPOINT:
349 len = 1;
350 breakinfo[i].type = X86_BREAKPOINT_EXECUTE;
351 break;
352 case BP_WRITE_WATCHPOINT:
353 breakinfo[i].type = X86_BREAKPOINT_WRITE;
354 break;
355 case BP_ACCESS_WATCHPOINT:
356 breakinfo[i].type = X86_BREAKPOINT_RW;
357 break;
358 default:
359 return -1;
361 switch (len) {
362 case 1:
363 breakinfo[i].len = X86_BREAKPOINT_LEN_1;
364 break;
365 case 2:
366 breakinfo[i].len = X86_BREAKPOINT_LEN_2;
367 break;
368 case 4:
369 breakinfo[i].len = X86_BREAKPOINT_LEN_4;
370 break;
371 #ifdef CONFIG_X86_64
372 case 8:
373 breakinfo[i].len = X86_BREAKPOINT_LEN_8;
374 break;
375 #endif
376 default:
377 return -1;
379 breakinfo[i].addr = addr;
380 if (hw_break_reserve_slot(i)) {
381 breakinfo[i].addr = 0;
382 return -1;
384 breakinfo[i].enabled = 1;
386 return 0;
390 * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
391 * @regs: Current &struct pt_regs.
393 * This function will be called if the particular architecture must
394 * disable hardware debugging while it is processing gdb packets or
395 * handling exception.
397 static void kgdb_disable_hw_debug(struct pt_regs *regs)
399 int i;
400 int cpu = raw_smp_processor_id();
401 struct perf_event *bp;
403 /* Disable hardware debugging while we are in kgdb: */
404 set_debugreg(0UL, 7);
405 for (i = 0; i < HBP_NUM; i++) {
406 if (!breakinfo[i].enabled)
407 continue;
408 if (dbg_is_early) {
409 early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
410 breakinfo[i].type);
411 continue;
413 bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
414 if (bp->attr.disabled == 1)
415 continue;
416 arch_uninstall_hw_breakpoint(bp);
417 bp->attr.disabled = 1;
421 #ifdef CONFIG_SMP
423 * kgdb_roundup_cpus - Get other CPUs into a holding pattern
424 * @flags: Current IRQ state
426 * On SMP systems, we need to get the attention of the other CPUs
427 * and get them be in a known state. This should do what is needed
428 * to get the other CPUs to call kgdb_wait(). Note that on some arches,
429 * the NMI approach is not used for rounding up all the CPUs. For example,
430 * in case of MIPS, smp_call_function() is used to roundup CPUs. In
431 * this case, we have to make sure that interrupts are enabled before
432 * calling smp_call_function(). The argument to this function is
433 * the flags that will be used when restoring the interrupts. There is
434 * local_irq_save() call before kgdb_roundup_cpus().
436 * On non-SMP systems, this is not called.
438 void kgdb_roundup_cpus(unsigned long flags)
440 apic->send_IPI_allbutself(APIC_DM_NMI);
442 #endif
445 * kgdb_arch_handle_exception - Handle architecture specific GDB packets.
446 * @vector: The error vector of the exception that happened.
447 * @signo: The signal number of the exception that happened.
448 * @err_code: The error code of the exception that happened.
449 * @remcom_in_buffer: The buffer of the packet we have read.
450 * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
451 * @regs: The &struct pt_regs of the current process.
453 * This function MUST handle the 'c' and 's' command packets,
454 * as well packets to set / remove a hardware breakpoint, if used.
455 * If there are additional packets which the hardware needs to handle,
456 * they are handled here. The code should return -1 if it wants to
457 * process more packets, and a %0 or %1 if it wants to exit from the
458 * kgdb callback.
460 int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
461 char *remcomInBuffer, char *remcomOutBuffer,
462 struct pt_regs *linux_regs)
464 unsigned long addr;
465 char *ptr;
467 switch (remcomInBuffer[0]) {
468 case 'c':
469 case 's':
470 /* try to read optional parameter, pc unchanged if no parm */
471 ptr = &remcomInBuffer[1];
472 if (kgdb_hex2long(&ptr, &addr))
473 linux_regs->ip = addr;
474 case 'D':
475 case 'k':
476 /* clear the trace bit */
477 linux_regs->flags &= ~X86_EFLAGS_TF;
478 atomic_set(&kgdb_cpu_doing_single_step, -1);
480 /* set the trace bit if we're stepping */
481 if (remcomInBuffer[0] == 's') {
482 linux_regs->flags |= X86_EFLAGS_TF;
483 atomic_set(&kgdb_cpu_doing_single_step,
484 raw_smp_processor_id());
487 return 0;
490 /* this means that we do not want to exit from the handler: */
491 return -1;
494 static inline int
495 single_step_cont(struct pt_regs *regs, struct die_args *args)
498 * Single step exception from kernel space to user space so
499 * eat the exception and continue the process:
501 printk(KERN_ERR "KGDB: trap/step from kernel to user space, "
502 "resuming...\n");
503 kgdb_arch_handle_exception(args->trapnr, args->signr,
504 args->err, "c", "", regs);
506 * Reset the BS bit in dr6 (pointed by args->err) to
507 * denote completion of processing
509 (*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
511 return NOTIFY_STOP;
514 static int was_in_debug_nmi[NR_CPUS];
516 static int kgdb_nmi_handler(unsigned int cmd, struct pt_regs *regs)
518 switch (cmd) {
519 case NMI_LOCAL:
520 if (atomic_read(&kgdb_active) != -1) {
521 /* KGDB CPU roundup */
522 kgdb_nmicallback(raw_smp_processor_id(), regs);
523 was_in_debug_nmi[raw_smp_processor_id()] = 1;
524 touch_nmi_watchdog();
525 return NMI_HANDLED;
527 break;
529 case NMI_UNKNOWN:
530 if (was_in_debug_nmi[raw_smp_processor_id()]) {
531 was_in_debug_nmi[raw_smp_processor_id()] = 0;
532 return NMI_HANDLED;
534 break;
535 default:
536 /* do nothing */
537 break;
539 return NMI_DONE;
542 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
544 struct pt_regs *regs = args->regs;
546 switch (cmd) {
547 case DIE_DEBUG:
548 if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
549 if (user_mode(regs))
550 return single_step_cont(regs, args);
551 break;
552 } else if (test_thread_flag(TIF_SINGLESTEP))
553 /* This means a user thread is single stepping
554 * a system call which should be ignored
556 return NOTIFY_DONE;
557 /* fall through */
558 default:
559 if (user_mode(regs))
560 return NOTIFY_DONE;
563 if (kgdb_handle_exception(args->trapnr, args->signr, cmd, regs))
564 return NOTIFY_DONE;
566 /* Must touch watchdog before return to normal operation */
567 touch_nmi_watchdog();
568 return NOTIFY_STOP;
571 int kgdb_ll_trap(int cmd, const char *str,
572 struct pt_regs *regs, long err, int trap, int sig)
574 struct die_args args = {
575 .regs = regs,
576 .str = str,
577 .err = err,
578 .trapnr = trap,
579 .signr = sig,
583 if (!kgdb_io_module_registered)
584 return NOTIFY_DONE;
586 return __kgdb_notify(&args, cmd);
589 static int
590 kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
592 unsigned long flags;
593 int ret;
595 local_irq_save(flags);
596 ret = __kgdb_notify(ptr, cmd);
597 local_irq_restore(flags);
599 return ret;
602 static struct notifier_block kgdb_notifier = {
603 .notifier_call = kgdb_notify,
607 * kgdb_arch_init - Perform any architecture specific initalization.
609 * This function will handle the initalization of any architecture
610 * specific callbacks.
612 int kgdb_arch_init(void)
614 int retval;
616 retval = register_die_notifier(&kgdb_notifier);
617 if (retval)
618 goto out;
620 retval = register_nmi_handler(NMI_LOCAL, kgdb_nmi_handler,
621 0, "kgdb");
622 if (retval)
623 goto out1;
625 retval = register_nmi_handler(NMI_UNKNOWN, kgdb_nmi_handler,
626 0, "kgdb");
628 if (retval)
629 goto out2;
631 return retval;
633 out2:
634 unregister_nmi_handler(NMI_LOCAL, "kgdb");
635 out1:
636 unregister_die_notifier(&kgdb_notifier);
637 out:
638 return retval;
641 static void kgdb_hw_overflow_handler(struct perf_event *event,
642 struct perf_sample_data *data, struct pt_regs *regs)
644 struct task_struct *tsk = current;
645 int i;
647 for (i = 0; i < 4; i++)
648 if (breakinfo[i].enabled)
649 tsk->thread.debugreg6 |= (DR_TRAP0 << i);
652 void kgdb_arch_late(void)
654 int i, cpu;
655 struct perf_event_attr attr;
656 struct perf_event **pevent;
659 * Pre-allocate the hw breakpoint structions in the non-atomic
660 * portion of kgdb because this operation requires mutexs to
661 * complete.
663 hw_breakpoint_init(&attr);
664 attr.bp_addr = (unsigned long)kgdb_arch_init;
665 attr.bp_len = HW_BREAKPOINT_LEN_1;
666 attr.bp_type = HW_BREAKPOINT_W;
667 attr.disabled = 1;
668 for (i = 0; i < HBP_NUM; i++) {
669 if (breakinfo[i].pev)
670 continue;
671 breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL, NULL);
672 if (IS_ERR((void * __force)breakinfo[i].pev)) {
673 printk(KERN_ERR "kgdb: Could not allocate hw"
674 "breakpoints\nDisabling the kernel debugger\n");
675 breakinfo[i].pev = NULL;
676 kgdb_arch_exit();
677 return;
679 for_each_online_cpu(cpu) {
680 pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
681 pevent[0]->hw.sample_period = 1;
682 pevent[0]->overflow_handler = kgdb_hw_overflow_handler;
683 if (pevent[0]->destroy != NULL) {
684 pevent[0]->destroy = NULL;
685 release_bp_slot(*pevent);
692 * kgdb_arch_exit - Perform any architecture specific uninitalization.
694 * This function will handle the uninitalization of any architecture
695 * specific callbacks, for dynamic registration and unregistration.
697 void kgdb_arch_exit(void)
699 int i;
700 for (i = 0; i < 4; i++) {
701 if (breakinfo[i].pev) {
702 unregister_wide_hw_breakpoint(breakinfo[i].pev);
703 breakinfo[i].pev = NULL;
706 unregister_nmi_handler(NMI_UNKNOWN, "kgdb");
707 unregister_nmi_handler(NMI_LOCAL, "kgdb");
708 unregister_die_notifier(&kgdb_notifier);
713 * kgdb_skipexception - Bail out of KGDB when we've been triggered.
714 * @exception: Exception vector number
715 * @regs: Current &struct pt_regs.
717 * On some architectures we need to skip a breakpoint exception when
718 * it occurs after a breakpoint has been removed.
720 * Skip an int3 exception when it occurs after a breakpoint has been
721 * removed. Backtrack eip by 1 since the int3 would have caused it to
722 * increment by 1.
724 int kgdb_skipexception(int exception, struct pt_regs *regs)
726 if (exception == 3 && kgdb_isremovedbreak(regs->ip - 1)) {
727 regs->ip -= 1;
728 return 1;
730 return 0;
733 unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
735 if (exception == 3)
736 return instruction_pointer(regs) - 1;
737 return instruction_pointer(regs);
740 void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
742 regs->ip = ip;
745 int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
747 int err;
748 char opc[BREAK_INSTR_SIZE];
750 bpt->type = BP_BREAKPOINT;
751 err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
752 BREAK_INSTR_SIZE);
753 if (err)
754 return err;
755 err = probe_kernel_write((char *)bpt->bpt_addr,
756 arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
757 #ifdef CONFIG_DEBUG_RODATA
758 if (!err)
759 return err;
761 * It is safe to call text_poke() because normal kernel execution
762 * is stopped on all cores, so long as the text_mutex is not locked.
764 if (mutex_is_locked(&text_mutex))
765 return -EBUSY;
766 text_poke((void *)bpt->bpt_addr, arch_kgdb_ops.gdb_bpt_instr,
767 BREAK_INSTR_SIZE);
768 err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE);
769 if (err)
770 return err;
771 if (memcmp(opc, arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE))
772 return -EINVAL;
773 bpt->type = BP_POKE_BREAKPOINT;
774 #endif /* CONFIG_DEBUG_RODATA */
775 return err;
778 int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
780 #ifdef CONFIG_DEBUG_RODATA
781 int err;
782 char opc[BREAK_INSTR_SIZE];
784 if (bpt->type != BP_POKE_BREAKPOINT)
785 goto knl_write;
787 * It is safe to call text_poke() because normal kernel execution
788 * is stopped on all cores, so long as the text_mutex is not locked.
790 if (mutex_is_locked(&text_mutex))
791 goto knl_write;
792 text_poke((void *)bpt->bpt_addr, bpt->saved_instr, BREAK_INSTR_SIZE);
793 err = probe_kernel_read(opc, (char *)bpt->bpt_addr, BREAK_INSTR_SIZE);
794 if (err || memcmp(opc, bpt->saved_instr, BREAK_INSTR_SIZE))
795 goto knl_write;
796 return err;
797 knl_write:
798 #endif /* CONFIG_DEBUG_RODATA */
799 return probe_kernel_write((char *)bpt->bpt_addr,
800 (char *)bpt->saved_instr, BREAK_INSTR_SIZE);
803 struct kgdb_arch arch_kgdb_ops = {
804 /* Breakpoint instruction: */
805 .gdb_bpt_instr = { 0xcc },
806 .flags = KGDB_HW_BREAKPOINT,
807 .set_hw_breakpoint = kgdb_set_hw_break,
808 .remove_hw_breakpoint = kgdb_remove_hw_break,
809 .disable_hw_break = kgdb_disable_hw_debug,
810 .remove_all_hw_break = kgdb_remove_all_hw_break,
811 .correct_hw_break = kgdb_correct_hw_break,