spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / drivers / net / ethernet / brocade / bna / bfi_reg.h
blobefacff3ab51d5799f9cb392d971bddc590e0bf47
1 /*
2 * Linux network driver for Brocade Converged Network Adapter.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License (GPL) Version 2 as
6 * published by the Free Software Foundation
8 * This program is distributed in the hope that it will be useful, but
9 * WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 * General Public License for more details.
14 * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
15 * All rights reserved
16 * www.brocade.com
20 * bfi_reg.h ASIC register defines for all Brocade adapter ASICs
23 #ifndef __BFI_REG_H__
24 #define __BFI_REG_H__
26 #define HOSTFN0_INT_STATUS 0x00014000 /* cb/ct */
27 #define HOSTFN1_INT_STATUS 0x00014100 /* cb/ct */
28 #define HOSTFN2_INT_STATUS 0x00014300 /* ct */
29 #define HOSTFN3_INT_STATUS 0x00014400 /* ct */
30 #define HOSTFN0_INT_MSK 0x00014004 /* cb/ct */
31 #define HOSTFN1_INT_MSK 0x00014104 /* cb/ct */
32 #define HOSTFN2_INT_MSK 0x00014304 /* ct */
33 #define HOSTFN3_INT_MSK 0x00014404 /* ct */
35 #define HOST_PAGE_NUM_FN0 0x00014008 /* cb/ct */
36 #define HOST_PAGE_NUM_FN1 0x00014108 /* cb/ct */
37 #define HOST_PAGE_NUM_FN2 0x00014308 /* ct */
38 #define HOST_PAGE_NUM_FN3 0x00014408 /* ct */
40 #define APP_PLL_LCLK_CTL_REG 0x00014204 /* cb/ct */
41 #define __P_LCLK_PLL_LOCK 0x80000000
42 #define __APP_PLL_LCLK_SRAM_USE_100MHZ 0x00100000
43 #define __APP_PLL_LCLK_RESET_TIMER_MK 0x000e0000
44 #define __APP_PLL_LCLK_RESET_TIMER_SH 17
45 #define __APP_PLL_LCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)
46 #define __APP_PLL_LCLK_LOGIC_SOFT_RESET 0x00010000
47 #define __APP_PLL_LCLK_CNTLMT0_1_MK 0x0000c000
48 #define __APP_PLL_LCLK_CNTLMT0_1_SH 14
49 #define __APP_PLL_LCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)
50 #define __APP_PLL_LCLK_JITLMT0_1_MK 0x00003000
51 #define __APP_PLL_LCLK_JITLMT0_1_SH 12
52 #define __APP_PLL_LCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)
53 #define __APP_PLL_LCLK_HREF 0x00000800
54 #define __APP_PLL_LCLK_HDIV 0x00000400
55 #define __APP_PLL_LCLK_P0_1_MK 0x00000300
56 #define __APP_PLL_LCLK_P0_1_SH 8
57 #define __APP_PLL_LCLK_P0_1(_v) ((_v) << __APP_PLL_LCLK_P0_1_SH)
58 #define __APP_PLL_LCLK_Z0_2_MK 0x000000e0
59 #define __APP_PLL_LCLK_Z0_2_SH 5
60 #define __APP_PLL_LCLK_Z0_2(_v) ((_v) << __APP_PLL_LCLK_Z0_2_SH)
61 #define __APP_PLL_LCLK_RSEL200500 0x00000010
62 #define __APP_PLL_LCLK_ENARST 0x00000008
63 #define __APP_PLL_LCLK_BYPASS 0x00000004
64 #define __APP_PLL_LCLK_LRESETN 0x00000002
65 #define __APP_PLL_LCLK_ENABLE 0x00000001
66 #define APP_PLL_SCLK_CTL_REG 0x00014208 /* cb/ct */
67 #define __P_SCLK_PLL_LOCK 0x80000000
68 #define __APP_PLL_SCLK_RESET_TIMER_MK 0x000e0000
69 #define __APP_PLL_SCLK_RESET_TIMER_SH 17
70 #define __APP_PLL_SCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)
71 #define __APP_PLL_SCLK_LOGIC_SOFT_RESET 0x00010000
72 #define __APP_PLL_SCLK_CNTLMT0_1_MK 0x0000c000
73 #define __APP_PLL_SCLK_CNTLMT0_1_SH 14
74 #define __APP_PLL_SCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)
75 #define __APP_PLL_SCLK_JITLMT0_1_MK 0x00003000
76 #define __APP_PLL_SCLK_JITLMT0_1_SH 12
77 #define __APP_PLL_SCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)
78 #define __APP_PLL_SCLK_HREF 0x00000800
79 #define __APP_PLL_SCLK_HDIV 0x00000400
80 #define __APP_PLL_SCLK_P0_1_MK 0x00000300
81 #define __APP_PLL_SCLK_P0_1_SH 8
82 #define __APP_PLL_SCLK_P0_1(_v) ((_v) << __APP_PLL_SCLK_P0_1_SH)
83 #define __APP_PLL_SCLK_Z0_2_MK 0x000000e0
84 #define __APP_PLL_SCLK_Z0_2_SH 5
85 #define __APP_PLL_SCLK_Z0_2(_v) ((_v) << __APP_PLL_SCLK_Z0_2_SH)
86 #define __APP_PLL_SCLK_RSEL200500 0x00000010
87 #define __APP_PLL_SCLK_ENARST 0x00000008
88 #define __APP_PLL_SCLK_BYPASS 0x00000004
89 #define __APP_PLL_SCLK_LRESETN 0x00000002
90 #define __APP_PLL_SCLK_ENABLE 0x00000001
91 #define __ENABLE_MAC_AHB_1 0x00800000 /* ct */
92 #define __ENABLE_MAC_AHB_0 0x00400000 /* ct */
93 #define __ENABLE_MAC_1 0x00200000 /* ct */
94 #define __ENABLE_MAC_0 0x00100000 /* ct */
96 #define HOST_SEM0_REG 0x00014230 /* cb/ct */
97 #define HOST_SEM1_REG 0x00014234 /* cb/ct */
98 #define HOST_SEM2_REG 0x00014238 /* cb/ct */
99 #define HOST_SEM3_REG 0x0001423c /* cb/ct */
100 #define HOST_SEM4_REG 0x00014610 /* cb/ct */
101 #define HOST_SEM5_REG 0x00014614 /* cb/ct */
102 #define HOST_SEM6_REG 0x00014618 /* cb/ct */
103 #define HOST_SEM7_REG 0x0001461c /* cb/ct */
104 #define HOST_SEM0_INFO_REG 0x00014240 /* cb/ct */
105 #define HOST_SEM1_INFO_REG 0x00014244 /* cb/ct */
106 #define HOST_SEM2_INFO_REG 0x00014248 /* cb/ct */
107 #define HOST_SEM3_INFO_REG 0x0001424c /* cb/ct */
108 #define HOST_SEM4_INFO_REG 0x00014620 /* cb/ct */
109 #define HOST_SEM5_INFO_REG 0x00014624 /* cb/ct */
110 #define HOST_SEM6_INFO_REG 0x00014628 /* cb/ct */
111 #define HOST_SEM7_INFO_REG 0x0001462c /* cb/ct */
113 #define HOSTFN0_LPU0_CMD_STAT 0x00019000 /* cb/ct */
114 #define HOSTFN0_LPU1_CMD_STAT 0x00019004 /* cb/ct */
115 #define HOSTFN1_LPU0_CMD_STAT 0x00019010 /* cb/ct */
116 #define HOSTFN1_LPU1_CMD_STAT 0x00019014 /* cb/ct */
117 #define HOSTFN2_LPU0_CMD_STAT 0x00019150 /* ct */
118 #define HOSTFN2_LPU1_CMD_STAT 0x00019154 /* ct */
119 #define HOSTFN3_LPU0_CMD_STAT 0x00019160 /* ct */
120 #define HOSTFN3_LPU1_CMD_STAT 0x00019164 /* ct */
121 #define LPU0_HOSTFN0_CMD_STAT 0x00019008 /* cb/ct */
122 #define LPU1_HOSTFN0_CMD_STAT 0x0001900c /* cb/ct */
123 #define LPU0_HOSTFN1_CMD_STAT 0x00019018 /* cb/ct */
124 #define LPU1_HOSTFN1_CMD_STAT 0x0001901c /* cb/ct */
125 #define LPU0_HOSTFN2_CMD_STAT 0x00019158 /* ct */
126 #define LPU1_HOSTFN2_CMD_STAT 0x0001915c /* ct */
127 #define LPU0_HOSTFN3_CMD_STAT 0x00019168 /* ct */
128 #define LPU1_HOSTFN3_CMD_STAT 0x0001916c /* ct */
130 #define PSS_CTL_REG 0x00018800 /* cb/ct */
131 #define __PSS_I2C_CLK_DIV_MK 0x007f0000
132 #define __PSS_I2C_CLK_DIV_SH 16
133 #define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
134 #define __PSS_LMEM_INIT_DONE 0x00001000
135 #define __PSS_LMEM_RESET 0x00000200
136 #define __PSS_LMEM_INIT_EN 0x00000100
137 #define __PSS_LPU1_RESET 0x00000002
138 #define __PSS_LPU0_RESET 0x00000001
139 #define PSS_ERR_STATUS_REG 0x00018810 /* cb/ct */
140 #define ERR_SET_REG 0x00018818 /* cb/ct */
141 #define PSS_GPIO_OUT_REG 0x000188c0 /* cb/ct */
142 #define __PSS_GPIO_OUT_REG 0x00000fff
143 #define PSS_GPIO_OE_REG 0x000188c8 /* cb/ct */
144 #define __PSS_GPIO_OE_REG 0x000000ff
146 #define HOSTFN0_LPU_MBOX0_0 0x00019200 /* cb/ct */
147 #define HOSTFN1_LPU_MBOX0_8 0x00019260 /* cb/ct */
148 #define LPU_HOSTFN0_MBOX0_0 0x00019280 /* cb/ct */
149 #define LPU_HOSTFN1_MBOX0_8 0x000192e0 /* cb/ct */
150 #define HOSTFN2_LPU_MBOX0_0 0x00019400 /* ct */
151 #define HOSTFN3_LPU_MBOX0_8 0x00019460 /* ct */
152 #define LPU_HOSTFN2_MBOX0_0 0x00019480 /* ct */
153 #define LPU_HOSTFN3_MBOX0_8 0x000194e0 /* ct */
155 #define HOST_MSIX_ERR_INDEX_FN0 0x0001400c /* ct */
156 #define HOST_MSIX_ERR_INDEX_FN1 0x0001410c /* ct */
157 #define HOST_MSIX_ERR_INDEX_FN2 0x0001430c /* ct */
158 #define HOST_MSIX_ERR_INDEX_FN3 0x0001440c /* ct */
160 #define MBIST_CTL_REG 0x00014220 /* ct */
161 #define __EDRAM_BISTR_START 0x00000004
162 #define MBIST_STAT_REG 0x00014224 /* ct */
163 #define ETH_MAC_SER_REG 0x00014288 /* ct */
164 #define __APP_EMS_CKBUFAMPIN 0x00000020
165 #define __APP_EMS_REFCLKSEL 0x00000010
166 #define __APP_EMS_CMLCKSEL 0x00000008
167 #define __APP_EMS_REFCKBUFEN2 0x00000004
168 #define __APP_EMS_REFCKBUFEN1 0x00000002
169 #define __APP_EMS_CHANNEL_SEL 0x00000001
170 #define FNC_PERS_REG 0x00014604 /* ct */
171 #define __F3_FUNCTION_ACTIVE 0x80000000
172 #define __F3_FUNCTION_MODE 0x40000000
173 #define __F3_PORT_MAP_MK 0x30000000
174 #define __F3_PORT_MAP_SH 28
175 #define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
176 #define __F3_VM_MODE 0x08000000
177 #define __F3_INTX_STATUS_MK 0x07000000
178 #define __F3_INTX_STATUS_SH 24
179 #define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
180 #define __F2_FUNCTION_ACTIVE 0x00800000
181 #define __F2_FUNCTION_MODE 0x00400000
182 #define __F2_PORT_MAP_MK 0x00300000
183 #define __F2_PORT_MAP_SH 20
184 #define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
185 #define __F2_VM_MODE 0x00080000
186 #define __F2_INTX_STATUS_MK 0x00070000
187 #define __F2_INTX_STATUS_SH 16
188 #define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
189 #define __F1_FUNCTION_ACTIVE 0x00008000
190 #define __F1_FUNCTION_MODE 0x00004000
191 #define __F1_PORT_MAP_MK 0x00003000
192 #define __F1_PORT_MAP_SH 12
193 #define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
194 #define __F1_VM_MODE 0x00000800
195 #define __F1_INTX_STATUS_MK 0x00000700
196 #define __F1_INTX_STATUS_SH 8
197 #define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
198 #define __F0_FUNCTION_ACTIVE 0x00000080
199 #define __F0_FUNCTION_MODE 0x00000040
200 #define __F0_PORT_MAP_MK 0x00000030
201 #define __F0_PORT_MAP_SH 4
202 #define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
203 #define __F0_VM_MODE 0x00000008
204 #define __F0_INTX_STATUS 0x00000007
205 enum {
206 __F0_INTX_STATUS_MSIX = 0x0,
207 __F0_INTX_STATUS_INTA = 0x1,
208 __F0_INTX_STATUS_INTB = 0x2,
209 __F0_INTX_STATUS_INTC = 0x3,
210 __F0_INTX_STATUS_INTD = 0x4,
213 #define OP_MODE 0x0001460c
214 #define __APP_ETH_CLK_LOWSPEED 0x00000004
215 #define __GLOBAL_CORECLK_HALFSPEED 0x00000002
216 #define __GLOBAL_FCOE_MODE 0x00000001
217 #define FW_INIT_HALT_P0 0x000191ac
218 #define __FW_INIT_HALT_P 0x00000001
219 #define FW_INIT_HALT_P1 0x000191bc
220 #define PMM_1T_RESET_REG_P0 0x0002381c
221 #define __PMM_1T_RESET_P 0x00000001
222 #define PMM_1T_RESET_REG_P1 0x00023c1c
225 * Brocade 1860 Adapter specific defines
227 #define CT2_PCI_CPQ_BASE 0x00030000
228 #define CT2_PCI_APP_BASE 0x00030100
229 #define CT2_PCI_ETH_BASE 0x00030400
232 * APP block registers
234 #define CT2_HOSTFN_INT_STATUS (CT2_PCI_APP_BASE + 0x00)
235 #define CT2_HOSTFN_INTR_MASK (CT2_PCI_APP_BASE + 0x04)
236 #define CT2_HOSTFN_PERSONALITY0 (CT2_PCI_APP_BASE + 0x08)
237 #define __PME_STATUS_ 0x00200000
238 #define __PF_VF_BAR_SIZE_MODE__MK 0x00180000
239 #define __PF_VF_BAR_SIZE_MODE__SH 19
240 #define __PF_VF_BAR_SIZE_MODE_(_v) ((_v) << __PF_VF_BAR_SIZE_MODE__SH)
241 #define __FC_LL_PORT_MAP__MK 0x00060000
242 #define __FC_LL_PORT_MAP__SH 17
243 #define __FC_LL_PORT_MAP_(_v) ((_v) << __FC_LL_PORT_MAP__SH)
244 #define __PF_VF_ACTIVE_ 0x00010000
245 #define __PF_VF_CFG_RDY_ 0x00008000
246 #define __PF_VF_ENABLE_ 0x00004000
247 #define __PF_DRIVER_ACTIVE_ 0x00002000
248 #define __PF_PME_SEND_ENABLE_ 0x00001000
249 #define __PF_EXROM_OFFSET__MK 0x00000ff0
250 #define __PF_EXROM_OFFSET__SH 4
251 #define __PF_EXROM_OFFSET_(_v) ((_v) << __PF_EXROM_OFFSET__SH)
252 #define __FC_LL_MODE_ 0x00000008
253 #define __PF_INTX_PIN_ 0x00000007
254 #define CT2_HOSTFN_PERSONALITY1 (CT2_PCI_APP_BASE + 0x0C)
255 #define __PF_NUM_QUEUES1__MK 0xff000000
256 #define __PF_NUM_QUEUES1__SH 24
257 #define __PF_NUM_QUEUES1_(_v) ((_v) << __PF_NUM_QUEUES1__SH)
258 #define __PF_VF_QUE_OFFSET1__MK 0x00ff0000
259 #define __PF_VF_QUE_OFFSET1__SH 16
260 #define __PF_VF_QUE_OFFSET1_(_v) ((_v) << __PF_VF_QUE_OFFSET1__SH)
261 #define __PF_VF_NUM_QUEUES__MK 0x0000ff00
262 #define __PF_VF_NUM_QUEUES__SH 8
263 #define __PF_VF_NUM_QUEUES_(_v) ((_v) << __PF_VF_NUM_QUEUES__SH)
264 #define __PF_VF_QUE_OFFSET_ 0x000000ff
265 #define CT2_HOSTFN_PAGE_NUM (CT2_PCI_APP_BASE + 0x18)
266 #define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR (CT2_PCI_APP_BASE + 0x38)
269 * Brocade 1860 adapter CPQ block registers
271 #define CT2_HOSTFN_LPU0_MBOX0 (CT2_PCI_CPQ_BASE + 0x00)
272 #define CT2_HOSTFN_LPU1_MBOX0 (CT2_PCI_CPQ_BASE + 0x20)
273 #define CT2_LPU0_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x40)
274 #define CT2_LPU1_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x60)
275 #define CT2_HOSTFN_LPU0_CMD_STAT (CT2_PCI_CPQ_BASE + 0x80)
276 #define CT2_HOSTFN_LPU1_CMD_STAT (CT2_PCI_CPQ_BASE + 0x84)
277 #define CT2_LPU0_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x88)
278 #define CT2_LPU1_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x8c)
279 #define CT2_HOSTFN_LPU0_READ_STAT (CT2_PCI_CPQ_BASE + 0x90)
280 #define CT2_HOSTFN_LPU1_READ_STAT (CT2_PCI_CPQ_BASE + 0x94)
281 #define CT2_LPU0_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x98)
282 #define CT2_LPU1_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x9C)
283 #define CT2_HOST_SEM0_REG 0x000148f0
284 #define CT2_HOST_SEM1_REG 0x000148f4
285 #define CT2_HOST_SEM2_REG 0x000148f8
286 #define CT2_HOST_SEM3_REG 0x000148fc
287 #define CT2_HOST_SEM4_REG 0x00014900
288 #define CT2_HOST_SEM5_REG 0x00014904
289 #define CT2_HOST_SEM6_REG 0x00014908
290 #define CT2_HOST_SEM7_REG 0x0001490c
291 #define CT2_HOST_SEM0_INFO_REG 0x000148b0
292 #define CT2_HOST_SEM1_INFO_REG 0x000148b4
293 #define CT2_HOST_SEM2_INFO_REG 0x000148b8
294 #define CT2_HOST_SEM3_INFO_REG 0x000148bc
295 #define CT2_HOST_SEM4_INFO_REG 0x000148c0
296 #define CT2_HOST_SEM5_INFO_REG 0x000148c4
297 #define CT2_HOST_SEM6_INFO_REG 0x000148c8
298 #define CT2_HOST_SEM7_INFO_REG 0x000148cc
300 #define CT2_APP_PLL_LCLK_CTL_REG 0x00014808
301 #define __APP_LPUCLK_HALFSPEED 0x40000000
302 #define __APP_PLL_LCLK_LOAD 0x20000000
303 #define __APP_PLL_LCLK_FBCNT_MK 0x1fe00000
304 #define __APP_PLL_LCLK_FBCNT_SH 21
305 #define __APP_PLL_LCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
306 enum {
307 __APP_PLL_LCLK_FBCNT_425_MHZ = 6,
308 __APP_PLL_LCLK_FBCNT_468_MHZ = 4,
310 #define __APP_PLL_LCLK_EXTFB 0x00000800
311 #define __APP_PLL_LCLK_ENOUTS 0x00000400
312 #define __APP_PLL_LCLK_RATE 0x00000010
313 #define CT2_APP_PLL_SCLK_CTL_REG 0x0001480c
314 #define __P_SCLK_PLL_LOCK 0x80000000
315 #define __APP_PLL_SCLK_REFCLK_SEL 0x40000000
316 #define __APP_PLL_SCLK_CLK_DIV2 0x20000000
317 #define __APP_PLL_SCLK_LOAD 0x10000000
318 #define __APP_PLL_SCLK_FBCNT_MK 0x0ff00000
319 #define __APP_PLL_SCLK_FBCNT_SH 20
320 #define __APP_PLL_SCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
321 enum {
322 __APP_PLL_SCLK_FBCNT_NORM = 6,
323 __APP_PLL_SCLK_FBCNT_10G_FC = 10,
325 #define __APP_PLL_SCLK_EXTFB 0x00000800
326 #define __APP_PLL_SCLK_ENOUTS 0x00000400
327 #define __APP_PLL_SCLK_RATE 0x00000010
328 #define CT2_PCIE_MISC_REG 0x00014804
329 #define __ETH_CLK_ENABLE_PORT1 0x00000010
330 #define CT2_CHIP_MISC_PRG 0x000148a4
331 #define __ETH_CLK_ENABLE_PORT0 0x00004000
332 #define __APP_LPU_SPEED 0x00000002
333 #define CT2_MBIST_STAT_REG 0x00014818
334 #define CT2_MBIST_CTL_REG 0x0001481c
335 #define CT2_PMM_1T_CONTROL_REG_P0 0x0002381c
336 #define __PMM_1T_PNDB_P 0x00000002
337 #define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c
338 #define CT2_WGN_STATUS 0x00014990
339 #define __A2T_AHB_LOAD 0x00000800
340 #define __WGN_READY 0x00000400
341 #define __GLBL_PF_VF_CFG_RDY 0x00000200
342 #define CT2_NFC_CSR_SET_REG 0x00027424
343 #define __HALT_NFC_CONTROLLER 0x00000002
344 #define __NFC_CONTROLLER_HALTED 0x00001000
346 #define CT2_CSI_MAC0_CONTROL_REG 0x000270d0
347 #define __CSI_MAC_RESET 0x00000010
348 #define __CSI_MAC_AHB_RESET 0x00000008
349 #define CT2_CSI_MAC1_CONTROL_REG 0x000270d4
350 #define CT2_CSI_MAC_CONTROL_REG(__n) \
351 (CT2_CSI_MAC0_CONTROL_REG + \
352 (__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
355 * Name semaphore registers based on usage
357 #define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
358 #define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
359 #define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
360 #define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
361 #define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
362 #define BFA_IOC_FAIL_SYNC HOST_SEM5_INFO_REG
365 * CT2 semaphore register locations changed
367 #define CT2_BFA_IOC0_HBEAT_REG CT2_HOST_SEM0_INFO_REG
368 #define CT2_BFA_IOC0_STATE_REG CT2_HOST_SEM1_INFO_REG
369 #define CT2_BFA_IOC1_HBEAT_REG CT2_HOST_SEM2_INFO_REG
370 #define CT2_BFA_IOC1_STATE_REG CT2_HOST_SEM3_INFO_REG
371 #define CT2_BFA_FW_USE_COUNT CT2_HOST_SEM4_INFO_REG
372 #define CT2_BFA_IOC_FAIL_SYNC CT2_HOST_SEM5_INFO_REG
374 #define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
375 #define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
378 * And corresponding host interrupt status bit field defines
380 #define __HFN_INT_CPE_Q0 0x00000001U
381 #define __HFN_INT_CPE_Q1 0x00000002U
382 #define __HFN_INT_CPE_Q2 0x00000004U
383 #define __HFN_INT_CPE_Q3 0x00000008U
384 #define __HFN_INT_CPE_Q4 0x00000010U
385 #define __HFN_INT_CPE_Q5 0x00000020U
386 #define __HFN_INT_CPE_Q6 0x00000040U
387 #define __HFN_INT_CPE_Q7 0x00000080U
388 #define __HFN_INT_RME_Q0 0x00000100U
389 #define __HFN_INT_RME_Q1 0x00000200U
390 #define __HFN_INT_RME_Q2 0x00000400U
391 #define __HFN_INT_RME_Q3 0x00000800U
392 #define __HFN_INT_RME_Q4 0x00001000U
393 #define __HFN_INT_RME_Q5 0x00002000U
394 #define __HFN_INT_RME_Q6 0x00004000U
395 #define __HFN_INT_RME_Q7 0x00008000U
396 #define __HFN_INT_ERR_EMC 0x00010000U
397 #define __HFN_INT_ERR_LPU0 0x00020000U
398 #define __HFN_INT_ERR_LPU1 0x00040000U
399 #define __HFN_INT_ERR_PSS 0x00080000U
400 #define __HFN_INT_MBOX_LPU0 0x00100000U
401 #define __HFN_INT_MBOX_LPU1 0x00200000U
402 #define __HFN_INT_MBOX1_LPU0 0x00400000U
403 #define __HFN_INT_MBOX1_LPU1 0x00800000U
404 #define __HFN_INT_LL_HALT 0x01000000U
405 #define __HFN_INT_CPE_MASK 0x000000ffU
406 #define __HFN_INT_RME_MASK 0x0000ff00U
407 #define __HFN_INT_ERR_MASK \
408 (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
409 __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)
410 #define __HFN_INT_FN0_MASK \
411 (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
412 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
413 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)
414 #define __HFN_INT_FN1_MASK \
415 (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
416 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
417 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)
420 * Host interrupt status defines for 1860
422 #define __HFN_INT_MBOX_LPU0_CT2 0x00010000U
423 #define __HFN_INT_MBOX_LPU1_CT2 0x00020000U
424 #define __HFN_INT_ERR_PSS_CT2 0x00040000U
425 #define __HFN_INT_ERR_LPU0_CT2 0x00080000U
426 #define __HFN_INT_ERR_LPU1_CT2 0x00100000U
427 #define __HFN_INT_CPQ_HALT_CT2 0x00200000U
428 #define __HFN_INT_ERR_WGN_CT2 0x00400000U
429 #define __HFN_INT_ERR_LEHRX_CT2 0x00800000U
430 #define __HFN_INT_ERR_LEHTX_CT2 0x01000000U
431 #define __HFN_INT_ERR_MASK_CT2 \
432 (__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
433 __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
434 __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
435 __HFN_INT_ERR_LEHTX_CT2)
436 #define __HFN_INT_FN0_MASK_CT2 \
437 (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
438 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
439 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)
440 #define __HFN_INT_FN1_MASK_CT2 \
441 (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
442 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
443 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)
446 * asic memory map.
448 #define PSS_SMEM_PAGE_START 0x8000
449 #define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
450 #define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
452 #endif /* __BFI_REG_H__ */