spi-topcliff-pch: add recovery processing in case wait-event timeout

[zen-stable.git] / drivers / net / ethernet / chelsio / cxgb4vf / t4vf_hw.c

/*
 * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
 * driver for Linux.
 *
 * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include <linux/pci.h>

#include "t4vf_common.h"
#include "t4vf_defs.h"

#include "../cxgb4/t4_regs.h"
#include "../cxgb4/t4fw_api.h"

/*
 * Wait for the device to become ready (signified by our "who am I" register
 * returning a value other than all 1's).  Return an error if it doesn't
 * become ready ...
 */
int __devinit t4vf_wait_dev_ready(struct adapter *adapter)
{
        const u32 whoami = T4VF_PL_BASE_ADDR + PL_VF_WHOAMI;
        const u32 notready1 = 0xffffffff;
        const u32 notready2 = 0xeeeeeeee;
        u32 val;

        val = t4_read_reg(adapter, whoami);
        if (val != notready1 && val != notready2)
                return 0;
        msleep(500);
        val = t4_read_reg(adapter, whoami);
        if (val != notready1 && val != notready2)
                return 0;
        else
                return -EIO;
}

/*
 * Get the reply to a mailbox command and store it in @rpl in big-endian order
 * (since the firmware data structures are specified in a big-endian layout).
 */
static void get_mbox_rpl(struct adapter *adapter, __be64 *rpl, int size,
                         u32 mbox_data)
{
        for ( ; size; size -= 8, mbox_data += 8)
                *rpl++ = cpu_to_be64(t4_read_reg64(adapter, mbox_data));
}

/*
 * Dump contents of mailbox with a leading tag.
 */
static void dump_mbox(struct adapter *adapter, const char *tag, u32 mbox_data)
{
        dev_err(adapter->pdev_dev,
                "mbox %s: %llx %llx %llx %llx %llx %llx %llx %llx\n", tag,
                (unsigned long long)t4_read_reg64(adapter, mbox_data +  0),
                (unsigned long long)t4_read_reg64(adapter, mbox_data +  8),
                (unsigned long long)t4_read_reg64(adapter, mbox_data + 16),
                (unsigned long long)t4_read_reg64(adapter, mbox_data + 24),
                (unsigned long long)t4_read_reg64(adapter, mbox_data + 32),
                (unsigned long long)t4_read_reg64(adapter, mbox_data + 40),
                (unsigned long long)t4_read_reg64(adapter, mbox_data + 48),
                (unsigned long long)t4_read_reg64(adapter, mbox_data + 56));
}

/**
 *      t4vf_wr_mbox_core - send a command to FW through the mailbox
 *      @adapter: the adapter
 *      @cmd: the command to write
 *      @size: command length in bytes
 *      @rpl: where to optionally store the reply
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Sends the given command to FW through the mailbox and waits for the
 *      FW to execute the command.  If @rpl is not %NULL it is used to store
 *      the FW's reply to the command.  The command and its optional reply
 *      are of the same length.  FW can take up to 500 ms to respond.
 *      @sleep_ok determines whether we may sleep while awaiting the response.
 *      If sleeping is allowed we use progressive backoff otherwise we spin.
 *
 *      The return value is 0 on success or a negative errno on failure.  A
 *      failure can happen either because we are not able to execute the
 *      command or FW executes it but signals an error.  In the latter case
 *      the return value is the error code indicated by FW (negated).
 */
int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
                      void *rpl, bool sleep_ok)
{
        static const int delay[] = {
                1, 1, 3, 5, 10, 10, 20, 50, 100
        };

        u32 v;
        int i, ms, delay_idx;
        const __be64 *p;
        u32 mbox_data = T4VF_MBDATA_BASE_ADDR;
        u32 mbox_ctl = T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL;

        /*
         * Commands must be multiples of 16 bytes in length and may not be
         * larger than the size of the Mailbox Data register array.
         */
        if ((size % 16) != 0 ||
            size > NUM_CIM_VF_MAILBOX_DATA_INSTANCES * 4)
                return -EINVAL;

        /*
         * Loop trying to get ownership of the mailbox.  Return an error
         * if we can't gain ownership.
         */
        v = MBOWNER_GET(t4_read_reg(adapter, mbox_ctl));
        for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
                v = MBOWNER_GET(t4_read_reg(adapter, mbox_ctl));
        if (v != MBOX_OWNER_DRV)
                return v == MBOX_OWNER_FW ? -EBUSY : -ETIMEDOUT;

        /*
         * Write the command array into the Mailbox Data register array and
         * transfer ownership of the mailbox to the firmware.
         *
         * For the VFs, the Mailbox Data "registers" are actually backed by
         * T4's "MA" interface rather than PL Registers (as is the case for
         * the PFs).  Because these are in different coherency domains, the
         * write to the VF's PL-register-backed Mailbox Control can race in
         * front of the writes to the MA-backed VF Mailbox Data "registers".
         * So we need to do a read-back on at least one byte of the VF Mailbox
         * Data registers before doing the write to the VF Mailbox Control
         * register.
         */
        for (i = 0, p = cmd; i < size; i += 8)
                t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++));
        t4_read_reg(adapter, mbox_data);         /* flush write */

        t4_write_reg(adapter, mbox_ctl,
                     MBMSGVALID | MBOWNER(MBOX_OWNER_FW));
        t4_read_reg(adapter, mbox_ctl);          /* flush write */

        /*
         * Spin waiting for firmware to acknowledge processing our command.
         */
        delay_idx = 0;
        ms = delay[0];

        for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) {
                if (sleep_ok) {
                        ms = delay[delay_idx];
                        if (delay_idx < ARRAY_SIZE(delay) - 1)
                                delay_idx++;
                        msleep(ms);
                } else
                        mdelay(ms);

                /*
                 * If we're the owner, see if this is the reply we wanted.
                 */
                v = t4_read_reg(adapter, mbox_ctl);
                if (MBOWNER_GET(v) == MBOX_OWNER_DRV) {
                        /*
                         * If the Message Valid bit isn't on, revoke ownership
                         * of the mailbox and continue waiting for our reply.
                         */
                        if ((v & MBMSGVALID) == 0) {
                                t4_write_reg(adapter, mbox_ctl,
                                             MBOWNER(MBOX_OWNER_NONE));
                                continue;
                        }

                        /*
                         * We now have our reply.  Extract the command return
                         * value, copy the reply back to our caller's buffer
                         * (if specified) and revoke ownership of the mailbox.
                         * We return the (negated) firmware command return
                         * code (this depends on FW_SUCCESS == 0).
                         */

                        /* return value in low-order little-endian word */
                        v = t4_read_reg(adapter, mbox_data);
                        if (FW_CMD_RETVAL_GET(v))
                                dump_mbox(adapter, "FW Error", mbox_data);

                        if (rpl) {
                                /* request bit in high-order BE word */
                                WARN_ON((be32_to_cpu(*(const u32 *)cmd)
                                         & FW_CMD_REQUEST) == 0);
                                get_mbox_rpl(adapter, rpl, size, mbox_data);
                                WARN_ON((be32_to_cpu(*(u32 *)rpl)
                                         & FW_CMD_REQUEST) != 0);
                        }
                        t4_write_reg(adapter, mbox_ctl,
                                     MBOWNER(MBOX_OWNER_NONE));
                        return -FW_CMD_RETVAL_GET(v);
                }
        }

        /*
         * We timed out.  Return the error ...
         */
        dump_mbox(adapter, "FW Timeout", mbox_data);
        return -ETIMEDOUT;
}

/**
 *      hash_mac_addr - return the hash value of a MAC address
 *      @addr: the 48-bit Ethernet MAC address
 *
 *      Hashes a MAC address according to the hash function used by hardware
 *      inexact (hash) address matching.
 */
static int hash_mac_addr(const u8 *addr)
{
        u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2];
        u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5];
        a ^= b;
        a ^= (a >> 12);
        a ^= (a >> 6);
        return a & 0x3f;
}

/**
 *      init_link_config - initialize a link's SW state
 *      @lc: structure holding the link state
 *      @caps: link capabilities
 *
 *      Initializes the SW state maintained for each link, including the link's
 *      capabilities and default speed/flow-control/autonegotiation settings.
 */
static void __devinit init_link_config(struct link_config *lc,
                                       unsigned int caps)
{
        lc->supported = caps;
        lc->requested_speed = 0;
        lc->speed = 0;
        lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
        if (lc->supported & SUPPORTED_Autoneg) {
                lc->advertising = lc->supported;
                lc->autoneg = AUTONEG_ENABLE;
                lc->requested_fc |= PAUSE_AUTONEG;
        } else {
                lc->advertising = 0;
                lc->autoneg = AUTONEG_DISABLE;
        }
}

/**
 *      t4vf_port_init - initialize port hardware/software state
 *      @adapter: the adapter
 *      @pidx: the adapter port index
 */
int __devinit t4vf_port_init(struct adapter *adapter, int pidx)
{
        struct port_info *pi = adap2pinfo(adapter, pidx);
        struct fw_vi_cmd vi_cmd, vi_rpl;
        struct fw_port_cmd port_cmd, port_rpl;
        int v;
        u32 word;

        /*
         * Execute a VI Read command to get our Virtual Interface information
         * like MAC address, etc.
         */
        memset(&vi_cmd, 0, sizeof(vi_cmd));
        vi_cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) |
                                       FW_CMD_REQUEST |
                                       FW_CMD_READ);
        vi_cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(vi_cmd));
        vi_cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID(pi->viid));
        v = t4vf_wr_mbox(adapter, &vi_cmd, sizeof(vi_cmd), &vi_rpl);
        if (v)
                return v;

        BUG_ON(pi->port_id != FW_VI_CMD_PORTID_GET(vi_rpl.portid_pkd));
        pi->rss_size = FW_VI_CMD_RSSSIZE_GET(be16_to_cpu(vi_rpl.rsssize_pkd));
        t4_os_set_hw_addr(adapter, pidx, vi_rpl.mac);

        /*
         * If we don't have read access to our port information, we're done
         * now.  Otherwise, execute a PORT Read command to get it ...
         */
        if (!(adapter->params.vfres.r_caps & FW_CMD_CAP_PORT))
                return 0;

        memset(&port_cmd, 0, sizeof(port_cmd));
        port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP(FW_PORT_CMD) |
                                            FW_CMD_REQUEST |
                                            FW_CMD_READ |
                                            FW_PORT_CMD_PORTID(pi->port_id));
        port_cmd.action_to_len16 =
                cpu_to_be32(FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) |
                            FW_LEN16(port_cmd));
        v = t4vf_wr_mbox(adapter, &port_cmd, sizeof(port_cmd), &port_rpl);
        if (v)
                return v;

        v = 0;
        word = be16_to_cpu(port_rpl.u.info.pcap);
        if (word & FW_PORT_CAP_SPEED_100M)
                v |= SUPPORTED_100baseT_Full;
        if (word & FW_PORT_CAP_SPEED_1G)
                v |= SUPPORTED_1000baseT_Full;
        if (word & FW_PORT_CAP_SPEED_10G)
                v |= SUPPORTED_10000baseT_Full;
        if (word & FW_PORT_CAP_ANEG)
                v |= SUPPORTED_Autoneg;
        init_link_config(&pi->link_cfg, v);

        return 0;
}

/**
 *      t4vf_fw_reset - issue a reset to FW
 *      @adapter: the adapter
 *
 *      Issues a reset command to FW.  For a Physical Function this would
 *      result in the Firmware reseting all of its state.  For a Virtual
 *      Function this just resets the state associated with the VF.
 */
int t4vf_fw_reset(struct adapter *adapter)
{
        struct fw_reset_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RESET_CMD) |
                                      FW_CMD_WRITE);
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}

/**
 *      t4vf_query_params - query FW or device parameters
 *      @adapter: the adapter
 *      @nparams: the number of parameters
 *      @params: the parameter names
 *      @vals: the parameter values
 *
 *      Reads the values of firmware or device parameters.  Up to 7 parameters
 *      can be queried at once.
 */
int t4vf_query_params(struct adapter *adapter, unsigned int nparams,
                      const u32 *params, u32 *vals)
{
        int i, ret;
        struct fw_params_cmd cmd, rpl;
        struct fw_params_param *p;
        size_t len16;

        if (nparams > 7)
                return -EINVAL;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PARAMS_CMD) |
                                    FW_CMD_REQUEST |
                                    FW_CMD_READ);
        len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd,
                                      param[nparams].mnem), 16);
        cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
        for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++)
                p->mnem = htonl(*params++);

        ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
        if (ret == 0)
                for (i = 0, p = &rpl.param[0]; i < nparams; i++, p++)
                        *vals++ = be32_to_cpu(p->val);
        return ret;
}

/**
 *      t4vf_set_params - sets FW or device parameters
 *      @adapter: the adapter
 *      @nparams: the number of parameters
 *      @params: the parameter names
 *      @vals: the parameter values
 *
 *      Sets the values of firmware or device parameters.  Up to 7 parameters
 *      can be specified at once.
 */
int t4vf_set_params(struct adapter *adapter, unsigned int nparams,
                    const u32 *params, const u32 *vals)
{
        int i;
        struct fw_params_cmd cmd;
        struct fw_params_param *p;
        size_t len16;

        if (nparams > 7)
                return -EINVAL;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PARAMS_CMD) |
                                    FW_CMD_REQUEST |
                                    FW_CMD_WRITE);
        len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd,
                                      param[nparams]), 16);
        cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
        for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++) {
                p->mnem = cpu_to_be32(*params++);
                p->val = cpu_to_be32(*vals++);
        }

        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}

/**
 *      t4vf_get_sge_params - retrieve adapter Scatter gather Engine parameters
 *      @adapter: the adapter
 *
 *      Retrieves various core SGE parameters in the form of hardware SGE
 *      register values.  The caller is responsible for decoding these as
 *      needed.  The SGE parameters are stored in @adapter->params.sge.
 */
int t4vf_get_sge_params(struct adapter *adapter)
{
        struct sge_params *sge_params = &adapter->params.sge;
        u32 params[7], vals[7];
        int v;

        params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_CONTROL));
        params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_HOST_PAGE_SIZE));
        params[2] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_FL_BUFFER_SIZE0));
        params[3] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_FL_BUFFER_SIZE1));
        params[4] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_0_AND_1));
        params[5] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_2_AND_3));
        params[6] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_4_AND_5));
        v = t4vf_query_params(adapter, 7, params, vals);
        if (v)
                return v;
        sge_params->sge_control = vals[0];
        sge_params->sge_host_page_size = vals[1];
        sge_params->sge_fl_buffer_size[0] = vals[2];
        sge_params->sge_fl_buffer_size[1] = vals[3];
        sge_params->sge_timer_value_0_and_1 = vals[4];
        sge_params->sge_timer_value_2_and_3 = vals[5];
        sge_params->sge_timer_value_4_and_5 = vals[6];

        params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
                     FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD));
        v = t4vf_query_params(adapter, 1, params, vals);
        if (v)
                return v;
        sge_params->sge_ingress_rx_threshold = vals[0];

        return 0;
}

/**
 *      t4vf_get_vpd_params - retrieve device VPD paremeters
 *      @adapter: the adapter
 *
 *      Retrives various device Vital Product Data parameters.  The parameters
 *      are stored in @adapter->params.vpd.
 */
int t4vf_get_vpd_params(struct adapter *adapter)
{
        struct vpd_params *vpd_params = &adapter->params.vpd;
        u32 params[7], vals[7];
        int v;

        params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
                     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK));
        v = t4vf_query_params(adapter, 1, params, vals);
        if (v)
                return v;
        vpd_params->cclk = vals[0];

        return 0;
}

/**
 *      t4vf_get_dev_params - retrieve device paremeters
 *      @adapter: the adapter
 *
 *      Retrives various device parameters.  The parameters are stored in
 *      @adapter->params.dev.
 */
int t4vf_get_dev_params(struct adapter *adapter)
{
        struct dev_params *dev_params = &adapter->params.dev;
        u32 params[7], vals[7];
        int v;

        params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
                     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FWREV));
        params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
                     FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_TPREV));
        v = t4vf_query_params(adapter, 2, params, vals);
        if (v)
                return v;
        dev_params->fwrev = vals[0];
        dev_params->tprev = vals[1];

        return 0;
}

/**
 *      t4vf_get_rss_glb_config - retrieve adapter RSS Global Configuration
 *      @adapter: the adapter
 *
 *      Retrieves global RSS mode and parameters with which we have to live
 *      and stores them in the @adapter's RSS parameters.
 */
int t4vf_get_rss_glb_config(struct adapter *adapter)
{
        struct rss_params *rss = &adapter->params.rss;
        struct fw_rss_glb_config_cmd cmd, rpl;
        int v;

        /*
         * Execute an RSS Global Configuration read command to retrieve
         * our RSS configuration.
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) |
                                      FW_CMD_REQUEST |
                                      FW_CMD_READ);
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
        v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
        if (v)
                return v;

        /*
         * Transate the big-endian RSS Global Configuration into our
         * cpu-endian format based on the RSS mode.  We also do first level
         * filtering at this point to weed out modes which don't support
         * VF Drivers ...
         */
        rss->mode = FW_RSS_GLB_CONFIG_CMD_MODE_GET(
                        be32_to_cpu(rpl.u.manual.mode_pkd));
        switch (rss->mode) {
        case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: {
                u32 word = be32_to_cpu(
                                rpl.u.basicvirtual.synmapen_to_hashtoeplitz);

                rss->u.basicvirtual.synmapen =
                        ((word & FW_RSS_GLB_CONFIG_CMD_SYNMAPEN) != 0);
                rss->u.basicvirtual.syn4tupenipv6 =
                        ((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV6) != 0);
                rss->u.basicvirtual.syn2tupenipv6 =
                        ((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV6) != 0);
                rss->u.basicvirtual.syn4tupenipv4 =
                        ((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV4) != 0);
                rss->u.basicvirtual.syn2tupenipv4 =
                        ((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV4) != 0);

                rss->u.basicvirtual.ofdmapen =
                        ((word & FW_RSS_GLB_CONFIG_CMD_OFDMAPEN) != 0);

                rss->u.basicvirtual.tnlmapen =
                        ((word & FW_RSS_GLB_CONFIG_CMD_TNLMAPEN) != 0);
                rss->u.basicvirtual.tnlalllookup =
                        ((word  & FW_RSS_GLB_CONFIG_CMD_TNLALLLKP) != 0);

                rss->u.basicvirtual.hashtoeplitz =
                        ((word & FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ) != 0);

                /* we need at least Tunnel Map Enable to be set */
                if (!rss->u.basicvirtual.tnlmapen)
                        return -EINVAL;
                break;
        }

        default:
                /* all unknown/unsupported RSS modes result in an error */
                return -EINVAL;
        }

        return 0;
}

/**
 *      t4vf_get_vfres - retrieve VF resource limits
 *      @adapter: the adapter
 *
 *      Retrieves configured resource limits and capabilities for a virtual
 *      function.  The results are stored in @adapter->vfres.
 */
int t4vf_get_vfres(struct adapter *adapter)
{
        struct vf_resources *vfres = &adapter->params.vfres;
        struct fw_pfvf_cmd cmd, rpl;
        int v;
        u32 word;

        /*
         * Execute PFVF Read command to get VF resource limits; bail out early
         * with error on command failure.
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PFVF_CMD) |
                                    FW_CMD_REQUEST |
                                    FW_CMD_READ);
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
        v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
        if (v)
                return v;

        /*
         * Extract VF resource limits and return success.
         */
        word = be32_to_cpu(rpl.niqflint_niq);
        vfres->niqflint = FW_PFVF_CMD_NIQFLINT_GET(word);
        vfres->niq = FW_PFVF_CMD_NIQ_GET(word);

        word = be32_to_cpu(rpl.type_to_neq);
        vfres->neq = FW_PFVF_CMD_NEQ_GET(word);
        vfres->pmask = FW_PFVF_CMD_PMASK_GET(word);

        word = be32_to_cpu(rpl.tc_to_nexactf);
        vfres->tc = FW_PFVF_CMD_TC_GET(word);
        vfres->nvi = FW_PFVF_CMD_NVI_GET(word);
        vfres->nexactf = FW_PFVF_CMD_NEXACTF_GET(word);

        word = be32_to_cpu(rpl.r_caps_to_nethctrl);
        vfres->r_caps = FW_PFVF_CMD_R_CAPS_GET(word);
        vfres->wx_caps = FW_PFVF_CMD_WX_CAPS_GET(word);
        vfres->nethctrl = FW_PFVF_CMD_NETHCTRL_GET(word);

        return 0;
}

/**
 *      t4vf_read_rss_vi_config - read a VI's RSS configuration
 *      @adapter: the adapter
 *      @viid: Virtual Interface ID
 *      @config: pointer to host-native VI RSS Configuration buffer
 *
 *      Reads the Virtual Interface's RSS configuration information and
 *      translates it into CPU-native format.
 */
int t4vf_read_rss_vi_config(struct adapter *adapter, unsigned int viid,
                            union rss_vi_config *config)
{
        struct fw_rss_vi_config_cmd cmd, rpl;
        int v;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_READ |
                                     FW_RSS_VI_CONFIG_CMD_VIID(viid));
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
        v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
        if (v)
                return v;

        switch (adapter->params.rss.mode) {
        case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: {
                u32 word = be32_to_cpu(rpl.u.basicvirtual.defaultq_to_udpen);

                config->basicvirtual.ip6fourtupen =
                        ((word & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN) != 0);
                config->basicvirtual.ip6twotupen =
                        ((word & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) != 0);
                config->basicvirtual.ip4fourtupen =
                        ((word & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN) != 0);
                config->basicvirtual.ip4twotupen =
                        ((word & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) != 0);
                config->basicvirtual.udpen =
                        ((word & FW_RSS_VI_CONFIG_CMD_UDPEN) != 0);
                config->basicvirtual.defaultq =
                        FW_RSS_VI_CONFIG_CMD_DEFAULTQ_GET(word);
                break;
        }

        default:
                return -EINVAL;
        }

        return 0;
}

/**
 *      t4vf_write_rss_vi_config - write a VI's RSS configuration
 *      @adapter: the adapter
 *      @viid: Virtual Interface ID
 *      @config: pointer to host-native VI RSS Configuration buffer
 *
 *      Write the Virtual Interface's RSS configuration information
 *      (translating it into firmware-native format before writing).
 */
int t4vf_write_rss_vi_config(struct adapter *adapter, unsigned int viid,
                             union rss_vi_config *config)
{
        struct fw_rss_vi_config_cmd cmd, rpl;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_WRITE |
                                     FW_RSS_VI_CONFIG_CMD_VIID(viid));
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
        switch (adapter->params.rss.mode) {
        case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: {
                u32 word = 0;

                if (config->basicvirtual.ip6fourtupen)
                        word |= FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN;
                if (config->basicvirtual.ip6twotupen)
                        word |= FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN;
                if (config->basicvirtual.ip4fourtupen)
                        word |= FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN;
                if (config->basicvirtual.ip4twotupen)
                        word |= FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN;
                if (config->basicvirtual.udpen)
                        word |= FW_RSS_VI_CONFIG_CMD_UDPEN;
                word |= FW_RSS_VI_CONFIG_CMD_DEFAULTQ(
                                config->basicvirtual.defaultq);
                cmd.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(word);
                break;
        }

        default:
                return -EINVAL;
        }

        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
}

/**
 *      t4vf_config_rss_range - configure a portion of the RSS mapping table
 *      @adapter: the adapter
 *      @viid: Virtual Interface of RSS Table Slice
 *      @start: starting entry in the table to write
 *      @n: how many table entries to write
 *      @rspq: values for the "Response Queue" (Ingress Queue) lookup table
 *      @nrspq: number of values in @rspq
 *
 *      Programs the selected part of the VI's RSS mapping table with the
 *      provided values.  If @nrspq < @n the supplied values are used repeatedly
 *      until the full table range is populated.
 *
 *      The caller must ensure the values in @rspq are in the range 0..1023.
 */
int t4vf_config_rss_range(struct adapter *adapter, unsigned int viid,
                          int start, int n, const u16 *rspq, int nrspq)
{
        const u16 *rsp = rspq;
        const u16 *rsp_end = rspq+nrspq;
        struct fw_rss_ind_tbl_cmd cmd;

        /*
         * Initialize firmware command template to write the RSS table.
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_IND_TBL_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_WRITE |
                                     FW_RSS_IND_TBL_CMD_VIID(viid));
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));

        /*
         * Each firmware RSS command can accommodate up to 32 RSS Ingress
         * Queue Identifiers.  These Ingress Queue IDs are packed three to
         * a 32-bit word as 10-bit values with the upper remaining 2 bits
         * reserved.
         */
        while (n > 0) {
                __be32 *qp = &cmd.iq0_to_iq2;
                int nq = min(n, 32);
                int ret;

                /*
                 * Set up the firmware RSS command header to send the next
                 * "nq" Ingress Queue IDs to the firmware.
                 */
                cmd.niqid = cpu_to_be16(nq);
                cmd.startidx = cpu_to_be16(start);

                /*
                 * "nq" more done for the start of the next loop.
                 */
                start += nq;
                n -= nq;

                /*
                 * While there are still Ingress Queue IDs to stuff into the
                 * current firmware RSS command, retrieve them from the
                 * Ingress Queue ID array and insert them into the command.
                 */
                while (nq > 0) {
                        /*
                         * Grab up to the next 3 Ingress Queue IDs (wrapping
                         * around the Ingress Queue ID array if necessary) and
                         * insert them into the firmware RSS command at the
                         * current 3-tuple position within the commad.
                         */
                        u16 qbuf[3];
                        u16 *qbp = qbuf;
                        int nqbuf = min(3, nq);

                        nq -= nqbuf;
                        qbuf[0] = qbuf[1] = qbuf[2] = 0;
                        while (nqbuf) {
                                nqbuf--;
                                *qbp++ = *rsp++;
                                if (rsp >= rsp_end)
                                        rsp = rspq;
                        }
                        *qp++ = cpu_to_be32(FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) |
                                            FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) |
                                            FW_RSS_IND_TBL_CMD_IQ2(qbuf[2]));
                }

                /*
                 * Send this portion of the RRS table update to the firmware;
                 * bail out on any errors.
                 */
                ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
                if (ret)
                        return ret;
        }
        return 0;
}

/**
 *      t4vf_alloc_vi - allocate a virtual interface on a port
 *      @adapter: the adapter
 *      @port_id: physical port associated with the VI
 *
 *      Allocate a new Virtual Interface and bind it to the indicated
 *      physical port.  Return the new Virtual Interface Identifier on
 *      success, or a [negative] error number on failure.
 */
int t4vf_alloc_vi(struct adapter *adapter, int port_id)
{
        struct fw_vi_cmd cmd, rpl;
        int v;

        /*
         * Execute a VI command to allocate Virtual Interface and return its
         * VIID.
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) |
                                    FW_CMD_REQUEST |
                                    FW_CMD_WRITE |
                                    FW_CMD_EXEC);
        cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) |
                                         FW_VI_CMD_ALLOC);
        cmd.portid_pkd = FW_VI_CMD_PORTID(port_id);
        v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
        if (v)
                return v;

        return FW_VI_CMD_VIID_GET(be16_to_cpu(rpl.type_viid));
}

/**
 *      t4vf_free_vi -- free a virtual interface
 *      @adapter: the adapter
 *      @viid: the virtual interface identifier
 *
 *      Free a previously allocated Virtual Interface.  Return an error on
 *      failure.
 */
int t4vf_free_vi(struct adapter *adapter, int viid)
{
        struct fw_vi_cmd cmd;

        /*
         * Execute a VI command to free the Virtual Interface.
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) |
                                    FW_CMD_REQUEST |
                                    FW_CMD_EXEC);
        cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) |
                                         FW_VI_CMD_FREE);
        cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID(viid));
        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}

/**
 *      t4vf_enable_vi - enable/disable a virtual interface
 *      @adapter: the adapter
 *      @viid: the Virtual Interface ID
 *      @rx_en: 1=enable Rx, 0=disable Rx
 *      @tx_en: 1=enable Tx, 0=disable Tx
 *
 *      Enables/disables a virtual interface.
 */
int t4vf_enable_vi(struct adapter *adapter, unsigned int viid,
                   bool rx_en, bool tx_en)
{
        struct fw_vi_enable_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_ENABLE_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_EXEC |
                                     FW_VI_ENABLE_CMD_VIID(viid));
        cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN(rx_en) |
                                       FW_VI_ENABLE_CMD_EEN(tx_en) |
                                       FW_LEN16(cmd));
        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}

/**
 *      t4vf_identify_port - identify a VI's port by blinking its LED
 *      @adapter: the adapter
 *      @viid: the Virtual Interface ID
 *      @nblinks: how many times to blink LED at 2.5 Hz
 *
 *      Identifies a VI's port by blinking its LED.
 */
int t4vf_identify_port(struct adapter *adapter, unsigned int viid,
                       unsigned int nblinks)
{
        struct fw_vi_enable_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_ENABLE_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_EXEC |
                                     FW_VI_ENABLE_CMD_VIID(viid));
        cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED |
                                       FW_LEN16(cmd));
        cmd.blinkdur = cpu_to_be16(nblinks);
        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}

/**
 *      t4vf_set_rxmode - set Rx properties of a virtual interface
 *      @adapter: the adapter
 *      @viid: the VI id
 *      @mtu: the new MTU or -1 for no change
 *      @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
 *      @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
 *      @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
 *      @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it,
 *              -1 no change
 *
 *      Sets Rx properties of a virtual interface.
 */
int t4vf_set_rxmode(struct adapter *adapter, unsigned int viid,
                    int mtu, int promisc, int all_multi, int bcast, int vlanex,
                    bool sleep_ok)
{
        struct fw_vi_rxmode_cmd cmd;

        /* convert to FW values */
        if (mtu < 0)
                mtu = FW_VI_RXMODE_CMD_MTU_MASK;
        if (promisc < 0)
                promisc = FW_VI_RXMODE_CMD_PROMISCEN_MASK;
        if (all_multi < 0)
                all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_MASK;
        if (bcast < 0)
                bcast = FW_VI_RXMODE_CMD_BROADCASTEN_MASK;
        if (vlanex < 0)
                vlanex = FW_VI_RXMODE_CMD_VLANEXEN_MASK;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_RXMODE_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_WRITE |
                                     FW_VI_RXMODE_CMD_VIID(viid));
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
        cmd.mtu_to_vlanexen =
                cpu_to_be32(FW_VI_RXMODE_CMD_MTU(mtu) |
                            FW_VI_RXMODE_CMD_PROMISCEN(promisc) |
                            FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) |
                            FW_VI_RXMODE_CMD_BROADCASTEN(bcast) |
                            FW_VI_RXMODE_CMD_VLANEXEN(vlanex));
        return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok);
}

/**
 *      t4vf_alloc_mac_filt - allocates exact-match filters for MAC addresses
 *      @adapter: the adapter
 *      @viid: the Virtual Interface Identifier
 *      @free: if true any existing filters for this VI id are first removed
 *      @naddr: the number of MAC addresses to allocate filters for (up to 7)
 *      @addr: the MAC address(es)
 *      @idx: where to store the index of each allocated filter
 *      @hash: pointer to hash address filter bitmap
 *      @sleep_ok: call is allowed to sleep
 *
 *      Allocates an exact-match filter for each of the supplied addresses and
 *      sets it to the corresponding address.  If @idx is not %NULL it should
 *      have at least @naddr entries, each of which will be set to the index of
 *      the filter allocated for the corresponding MAC address.  If a filter
 *      could not be allocated for an address its index is set to 0xffff.
 *      If @hash is not %NULL addresses that fail to allocate an exact filter
 *      are hashed and update the hash filter bitmap pointed at by @hash.
 *
 *      Returns a negative error number or the number of filters allocated.
 */
int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free,
                        unsigned int naddr, const u8 **addr, u16 *idx,
                        u64 *hash, bool sleep_ok)
{
        int offset, ret = 0;
        unsigned nfilters = 0;
        unsigned int rem = naddr;
        struct fw_vi_mac_cmd cmd, rpl;

        if (naddr > FW_CLS_TCAM_NUM_ENTRIES)
                return -EINVAL;

        for (offset = 0; offset < naddr; /**/) {
                unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact)
                                         ? rem
                                         : ARRAY_SIZE(cmd.u.exact));
                size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
                                                     u.exact[fw_naddr]), 16);
                struct fw_vi_mac_exact *p;
                int i;

                memset(&cmd, 0, sizeof(cmd));
                cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
                                             FW_CMD_REQUEST |
                                             FW_CMD_WRITE |
                                             (free ? FW_CMD_EXEC : 0) |
                                             FW_VI_MAC_CMD_VIID(viid));
                cmd.freemacs_to_len16 =
                        cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
                                    FW_CMD_LEN16(len16));

                for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) {
                        p->valid_to_idx = cpu_to_be16(
                                FW_VI_MAC_CMD_VALID |
                                FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
                        memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
                }


                ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl,
                                        sleep_ok);
                if (ret && ret != -ENOMEM)
                        break;

                for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) {
                        u16 index = FW_VI_MAC_CMD_IDX_GET(
                                be16_to_cpu(p->valid_to_idx));

                        if (idx)
                                idx[offset+i] =
                                        (index >= FW_CLS_TCAM_NUM_ENTRIES
                                         ? 0xffff
                                         : index);
                        if (index < FW_CLS_TCAM_NUM_ENTRIES)
                                nfilters++;
                        else if (hash)
                                *hash |= (1ULL << hash_mac_addr(addr[offset+i]));
                }

                free = false;
                offset += fw_naddr;
                rem -= fw_naddr;
        }

        /*
         * If there were no errors or we merely ran out of room in our MAC
         * address arena, return the number of filters actually written.
         */
        if (ret == 0 || ret == -ENOMEM)
                ret = nfilters;
        return ret;
}

/**
 *      t4vf_change_mac - modifies the exact-match filter for a MAC address
 *      @adapter: the adapter
 *      @viid: the Virtual Interface ID
 *      @idx: index of existing filter for old value of MAC address, or -1
 *      @addr: the new MAC address value
 *      @persist: if idx < 0, the new MAC allocation should be persistent
 *
 *      Modifies an exact-match filter and sets it to the new MAC address.
 *      Note that in general it is not possible to modify the value of a given
 *      filter so the generic way to modify an address filter is to free the
 *      one being used by the old address value and allocate a new filter for
 *      the new address value.  @idx can be -1 if the address is a new
 *      addition.
 *
 *      Returns a negative error number or the index of the filter with the new
 *      MAC value.
 */
int t4vf_change_mac(struct adapter *adapter, unsigned int viid,
                    int idx, const u8 *addr, bool persist)
{
        int ret;
        struct fw_vi_mac_cmd cmd, rpl;
        struct fw_vi_mac_exact *p = &cmd.u.exact[0];
        size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
                                             u.exact[1]), 16);

        /*
         * If this is a new allocation, determine whether it should be
         * persistent (across a "freemacs" operation) or not.
         */
        if (idx < 0)
                idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_WRITE |
                                     FW_VI_MAC_CMD_VIID(viid));
        cmd.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
        p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID |
                                      FW_VI_MAC_CMD_IDX(idx));
        memcpy(p->macaddr, addr, sizeof(p->macaddr));

        ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
        if (ret == 0) {
                p = &rpl.u.exact[0];
                ret = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx));
                if (ret >= FW_CLS_TCAM_NUM_ENTRIES)
                        ret = -ENOMEM;
        }
        return ret;
}

/**
 *      t4vf_set_addr_hash - program the MAC inexact-match hash filter
 *      @adapter: the adapter
 *      @viid: the Virtual Interface Identifier
 *      @ucast: whether the hash filter should also match unicast addresses
 *      @vec: the value to be written to the hash filter
 *      @sleep_ok: call is allowed to sleep
 *
 *      Sets the 64-bit inexact-match hash filter for a virtual interface.
 */
int t4vf_set_addr_hash(struct adapter *adapter, unsigned int viid,
                       bool ucast, u64 vec, bool sleep_ok)
{
        struct fw_vi_mac_cmd cmd;
        size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
                                             u.exact[0]), 16);

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
                                     FW_CMD_REQUEST |
                                     FW_CMD_WRITE |
                                     FW_VI_ENABLE_CMD_VIID(viid));
        cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN |
                                            FW_VI_MAC_CMD_HASHUNIEN(ucast) |
                                            FW_CMD_LEN16(len16));
        cmd.u.hash.hashvec = cpu_to_be64(vec);
        return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok);
}

/**
 *      t4vf_get_port_stats - collect "port" statistics
 *      @adapter: the adapter
 *      @pidx: the port index
 *      @s: the stats structure to fill
 *
 *      Collect statistics for the "port"'s Virtual Interface.
 */
int t4vf_get_port_stats(struct adapter *adapter, int pidx,
                        struct t4vf_port_stats *s)
{
        struct port_info *pi = adap2pinfo(adapter, pidx);
        struct fw_vi_stats_vf fwstats;
        unsigned int rem = VI_VF_NUM_STATS;
        __be64 *fwsp = (__be64 *)&fwstats;

        /*
         * Grab the Virtual Interface statistics a chunk at a time via mailbox
         * commands.  We could use a Work Request and get all of them at once
         * but that's an asynchronous interface which is awkward to use.
         */
        while (rem) {
                unsigned int ix = VI_VF_NUM_STATS - rem;
                unsigned int nstats = min(6U, rem);
                struct fw_vi_stats_cmd cmd, rpl;
                size_t len = (offsetof(struct fw_vi_stats_cmd, u) +
                              sizeof(struct fw_vi_stats_ctl));
                size_t len16 = DIV_ROUND_UP(len, 16);
                int ret;

                memset(&cmd, 0, sizeof(cmd));
                cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_STATS_CMD) |
                                             FW_VI_STATS_CMD_VIID(pi->viid) |
                                             FW_CMD_REQUEST |
                                             FW_CMD_READ);
                cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16));
                cmd.u.ctl.nstats_ix =
                        cpu_to_be16(FW_VI_STATS_CMD_IX(ix) |
                                    FW_VI_STATS_CMD_NSTATS(nstats));
                ret = t4vf_wr_mbox_ns(adapter, &cmd, len, &rpl);
                if (ret)
                        return ret;

                memcpy(fwsp, &rpl.u.ctl.stat0, sizeof(__be64) * nstats);

                rem -= nstats;
                fwsp += nstats;
        }

        /*
         * Translate firmware statistics into host native statistics.
         */
        s->tx_bcast_bytes = be64_to_cpu(fwstats.tx_bcast_bytes);
        s->tx_bcast_frames = be64_to_cpu(fwstats.tx_bcast_frames);
        s->tx_mcast_bytes = be64_to_cpu(fwstats.tx_mcast_bytes);
        s->tx_mcast_frames = be64_to_cpu(fwstats.tx_mcast_frames);
        s->tx_ucast_bytes = be64_to_cpu(fwstats.tx_ucast_bytes);
        s->tx_ucast_frames = be64_to_cpu(fwstats.tx_ucast_frames);
        s->tx_drop_frames = be64_to_cpu(fwstats.tx_drop_frames);
        s->tx_offload_bytes = be64_to_cpu(fwstats.tx_offload_bytes);
        s->tx_offload_frames = be64_to_cpu(fwstats.tx_offload_frames);

        s->rx_bcast_bytes = be64_to_cpu(fwstats.rx_bcast_bytes);
        s->rx_bcast_frames = be64_to_cpu(fwstats.rx_bcast_frames);
        s->rx_mcast_bytes = be64_to_cpu(fwstats.rx_mcast_bytes);
        s->rx_mcast_frames = be64_to_cpu(fwstats.rx_mcast_frames);
        s->rx_ucast_bytes = be64_to_cpu(fwstats.rx_ucast_bytes);
        s->rx_ucast_frames = be64_to_cpu(fwstats.rx_ucast_frames);

        s->rx_err_frames = be64_to_cpu(fwstats.rx_err_frames);

        return 0;
}

/**
 *      t4vf_iq_free - free an ingress queue and its free lists
 *      @adapter: the adapter
 *      @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
 *      @iqid: ingress queue ID
 *      @fl0id: FL0 queue ID or 0xffff if no attached FL0
 *      @fl1id: FL1 queue ID or 0xffff if no attached FL1
 *
 *      Frees an ingress queue and its associated free lists, if any.
 */
int t4vf_iq_free(struct adapter *adapter, unsigned int iqtype,
                 unsigned int iqid, unsigned int fl0id, unsigned int fl1id)
{
        struct fw_iq_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_IQ_CMD) |
                                    FW_CMD_REQUEST |
                                    FW_CMD_EXEC);
        cmd.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE |
                                         FW_LEN16(cmd));
        cmd.type_to_iqandstindex =
                cpu_to_be32(FW_IQ_CMD_TYPE(iqtype));

        cmd.iqid = cpu_to_be16(iqid);
        cmd.fl0id = cpu_to_be16(fl0id);
        cmd.fl1id = cpu_to_be16(fl1id);
        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}

/**
 *      t4vf_eth_eq_free - free an Ethernet egress queue
 *      @adapter: the adapter
 *      @eqid: egress queue ID
 *
 *      Frees an Ethernet egress queue.
 */
int t4vf_eth_eq_free(struct adapter *adapter, unsigned int eqid)
{
        struct fw_eq_eth_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_EQ_ETH_CMD) |
                                    FW_CMD_REQUEST |
                                    FW_CMD_EXEC);
        cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE |
                                         FW_LEN16(cmd));
        cmd.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID(eqid));
        return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}

/**
 *      t4vf_handle_fw_rpl - process a firmware reply message
 *      @adapter: the adapter
 *      @rpl: start of the firmware message
 *
 *      Processes a firmware message, such as link state change messages.
 */
int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
{
        const struct fw_cmd_hdr *cmd_hdr = (const struct fw_cmd_hdr *)rpl;
        u8 opcode = FW_CMD_OP_GET(be32_to_cpu(cmd_hdr->hi));

        switch (opcode) {
        case FW_PORT_CMD: {
                /*
                 * Link/module state change message.
                 */
                const struct fw_port_cmd *port_cmd =
                        (const struct fw_port_cmd *)rpl;
                u32 word;
                int action, port_id, link_ok, speed, fc, pidx;

                /*
                 * Extract various fields from port status change message.
                 */
                action = FW_PORT_CMD_ACTION_GET(
                        be32_to_cpu(port_cmd->action_to_len16));
                if (action != FW_PORT_ACTION_GET_PORT_INFO) {
                        dev_err(adapter->pdev_dev,
                                "Unknown firmware PORT reply action %x\n",
                                action);
                        break;
                }

                port_id = FW_PORT_CMD_PORTID_GET(
                        be32_to_cpu(port_cmd->op_to_portid));

                word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype);
                link_ok = (word & FW_PORT_CMD_LSTATUS) != 0;
                speed = 0;
                fc = 0;
                if (word & FW_PORT_CMD_RXPAUSE)
                        fc |= PAUSE_RX;
                if (word & FW_PORT_CMD_TXPAUSE)
                        fc |= PAUSE_TX;
                if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
                        speed = SPEED_100;
                else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
                        speed = SPEED_1000;
                else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
                        speed = SPEED_10000;

                /*
                 * Scan all of our "ports" (Virtual Interfaces) looking for
                 * those bound to the physical port which has changed.  If
                 * our recorded state doesn't match the current state,
                 * signal that change to the OS code.
                 */
                for_each_port(adapter, pidx) {
                        struct port_info *pi = adap2pinfo(adapter, pidx);
                        struct link_config *lc;

                        if (pi->port_id != port_id)
                                continue;

                        lc = &pi->link_cfg;
                        if (link_ok != lc->link_ok || speed != lc->speed ||
                            fc != lc->fc) {
                                /* something changed */
                                lc->link_ok = link_ok;
                                lc->speed = speed;
                                lc->fc = fc;
                                t4vf_os_link_changed(adapter, pidx, link_ok);
                        }
                }
                break;
        }

        default:
                dev_err(adapter->pdev_dev, "Unknown firmware reply %X\n",
                        opcode);
        }
        return 0;
}