2 * Copyright (c) 2010-2011 Atheros Communications Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/export.h>
19 #include "ar9003_phy.h"
21 static const int firstep_table
[] =
22 /* level: 0 1 2 3 4 5 6 7 8 */
23 { -4, -2, 0, 2, 4, 6, 8, 10, 12 }; /* lvl 0-8, default 2 */
25 static const int cycpwrThr1_table
[] =
26 /* level: 0 1 2 3 4 5 6 7 8 */
27 { -6, -4, -2, 0, 2, 4, 6, 8 }; /* lvl 0-7, default 3 */
30 * register values to turn OFDM weak signal detection OFF
32 static const int m1ThreshLow_off
= 127;
33 static const int m2ThreshLow_off
= 127;
34 static const int m1Thresh_off
= 127;
35 static const int m2Thresh_off
= 127;
36 static const int m2CountThr_off
= 31;
37 static const int m2CountThrLow_off
= 63;
38 static const int m1ThreshLowExt_off
= 127;
39 static const int m2ThreshLowExt_off
= 127;
40 static const int m1ThreshExt_off
= 127;
41 static const int m2ThreshExt_off
= 127;
44 * ar9003_hw_set_channel - set channel on single-chip device
45 * @ah: atheros hardware structure
48 * This is the function to change channel on single-chip devices, that is
49 * for AR9300 family of chipsets.
51 * This function takes the channel value in MHz and sets
52 * hardware channel value. Assumes writes have been enabled to analog bus.
57 * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
61 * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10)
62 * (freq_ref = 40MHz/(24>>amodeRefSel))
64 * For 5GHz channels which are 5MHz spaced,
65 * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
68 static int ar9003_hw_set_channel(struct ath_hw
*ah
, struct ath9k_channel
*chan
)
70 u16 bMode
, fracMode
= 0, aModeRefSel
= 0;
71 u32 freq
, channelSel
= 0, reg32
= 0;
72 struct chan_centers centers
;
75 ath9k_hw_get_channel_centers(ah
, chan
, ¢ers
);
76 freq
= centers
.synth_center
;
78 if (freq
< 4800) { /* 2 GHz, fractional mode */
79 if (AR_SREV_9330(ah
)) {
88 channelSel
= (freq
* 4) / div
;
89 chan_frac
= (((freq
* 4) % div
) * 0x20000) / div
;
90 channelSel
= (channelSel
<< 17) | chan_frac
;
91 } else if (AR_SREV_9485(ah
)) {
95 * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0
96 * ndiv = ((chan_mhz * 4) / 3) / freq_ref;
97 * chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000
99 channelSel
= (freq
* 4) / 120;
100 chan_frac
= (((freq
* 4) % 120) * 0x20000) / 120;
101 channelSel
= (channelSel
<< 17) | chan_frac
;
102 } else if (AR_SREV_9340(ah
)) {
103 if (ah
->is_clk_25mhz
) {
106 channelSel
= (freq
* 2) / 75;
107 chan_frac
= (((freq
* 2) % 75) * 0x20000) / 75;
108 channelSel
= (channelSel
<< 17) | chan_frac
;
110 channelSel
= CHANSEL_2G(freq
) >> 1;
112 channelSel
= CHANSEL_2G(freq
);
116 if (AR_SREV_9340(ah
) && ah
->is_clk_25mhz
) {
119 channelSel
= (freq
* 2) / 75;
120 chan_frac
= (((freq
* 2) % 75) * 0x20000) / 75;
121 channelSel
= (channelSel
<< 17) | chan_frac
;
123 channelSel
= CHANSEL_5G(freq
);
124 /* Doubler is ON, so, divide channelSel by 2. */
131 /* Enable fractional mode for all channels */
134 loadSynthChannel
= 0;
136 reg32
= (bMode
<< 29);
137 REG_WRITE(ah
, AR_PHY_SYNTH_CONTROL
, reg32
);
139 /* Enable Long shift Select for Synthesizer */
140 REG_RMW_FIELD(ah
, AR_PHY_65NM_CH0_SYNTH4
,
141 AR_PHY_SYNTH4_LONG_SHIFT_SELECT
, 1);
143 /* Program Synth. setting */
144 reg32
= (channelSel
<< 2) | (fracMode
<< 30) |
145 (aModeRefSel
<< 28) | (loadSynthChannel
<< 31);
146 REG_WRITE(ah
, AR_PHY_65NM_CH0_SYNTH7
, reg32
);
148 /* Toggle Load Synth channel bit */
149 loadSynthChannel
= 1;
150 reg32
= (channelSel
<< 2) | (fracMode
<< 30) |
151 (aModeRefSel
<< 28) | (loadSynthChannel
<< 31);
152 REG_WRITE(ah
, AR_PHY_65NM_CH0_SYNTH7
, reg32
);
155 ah
->curchan_rad_index
= -1;
161 * ar9003_hw_spur_mitigate_mrc_cck - convert baseband spur frequency
162 * @ah: atheros hardware structure
165 * For single-chip solutions. Converts to baseband spur frequency given the
166 * input channel frequency and compute register settings below.
168 * Spur mitigation for MRC CCK
170 static void ar9003_hw_spur_mitigate_mrc_cck(struct ath_hw
*ah
,
171 struct ath9k_channel
*chan
)
173 static const u32 spur_freq
[4] = { 2420, 2440, 2464, 2480 };
174 int cur_bb_spur
, negative
= 0, cck_spur_freq
;
176 int range
, max_spur_cnts
, synth_freq
;
177 u8
*spur_fbin_ptr
= NULL
;
180 * Need to verify range +/- 10 MHz in control channel, otherwise spur
181 * is out-of-band and can be ignored.
184 if (AR_SREV_9485(ah
) || AR_SREV_9340(ah
) || AR_SREV_9330(ah
)) {
185 spur_fbin_ptr
= ar9003_get_spur_chan_ptr(ah
,
187 if (spur_fbin_ptr
[0] == 0) /* No spur */
190 if (IS_CHAN_HT40(chan
)) {
192 if (REG_READ_FIELD(ah
, AR_PHY_GEN_CTRL
,
193 AR_PHY_GC_DYN2040_PRI_CH
) == 0)
194 synth_freq
= chan
->channel
+ 10;
196 synth_freq
= chan
->channel
- 10;
199 synth_freq
= chan
->channel
;
202 range
= AR_SREV_9462(ah
) ? 5 : 10;
204 synth_freq
= chan
->channel
;
207 for (i
= 0; i
< max_spur_cnts
; i
++) {
208 if (AR_SREV_9462(ah
) && (i
== 0 || i
== 3))
211 if (AR_SREV_9485(ah
) || AR_SREV_9340(ah
) || AR_SREV_9330(ah
))
212 cur_bb_spur
= FBIN2FREQ(spur_fbin_ptr
[i
],
213 IS_CHAN_2GHZ(chan
)) - synth_freq
;
215 cur_bb_spur
= spur_freq
[i
] - synth_freq
;
217 if (cur_bb_spur
< 0) {
219 cur_bb_spur
= -cur_bb_spur
;
221 if (cur_bb_spur
< range
) {
222 cck_spur_freq
= (int)((cur_bb_spur
<< 19) / 11);
225 cck_spur_freq
= -cck_spur_freq
;
227 cck_spur_freq
= cck_spur_freq
& 0xfffff;
229 REG_RMW_FIELD(ah
, AR_PHY_AGC_CONTROL
,
230 AR_PHY_AGC_CONTROL_YCOK_MAX
, 0x7);
231 REG_RMW_FIELD(ah
, AR_PHY_CCK_SPUR_MIT
,
232 AR_PHY_CCK_SPUR_MIT_SPUR_RSSI_THR
, 0x7f);
233 REG_RMW_FIELD(ah
, AR_PHY_CCK_SPUR_MIT
,
234 AR_PHY_CCK_SPUR_MIT_SPUR_FILTER_TYPE
,
236 REG_RMW_FIELD(ah
, AR_PHY_CCK_SPUR_MIT
,
237 AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT
,
239 REG_RMW_FIELD(ah
, AR_PHY_CCK_SPUR_MIT
,
240 AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ
,
247 REG_RMW_FIELD(ah
, AR_PHY_AGC_CONTROL
,
248 AR_PHY_AGC_CONTROL_YCOK_MAX
, 0x5);
249 REG_RMW_FIELD(ah
, AR_PHY_CCK_SPUR_MIT
,
250 AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT
, 0x0);
251 REG_RMW_FIELD(ah
, AR_PHY_CCK_SPUR_MIT
,
252 AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ
, 0x0);
255 /* Clean all spur register fields */
256 static void ar9003_hw_spur_ofdm_clear(struct ath_hw
*ah
)
258 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
259 AR_PHY_TIMING4_ENABLE_SPUR_FILTER
, 0);
260 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
261 AR_PHY_TIMING11_SPUR_FREQ_SD
, 0);
262 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
263 AR_PHY_TIMING11_SPUR_DELTA_PHASE
, 0);
264 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_EXT
,
265 AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD
, 0);
266 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
267 AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC
, 0);
268 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
269 AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR
, 0);
270 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
271 AR_PHY_TIMING4_ENABLE_SPUR_RSSI
, 0);
272 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
273 AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI
, 0);
274 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
275 AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT
, 0);
277 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
278 AR_PHY_SPUR_REG_ENABLE_MASK_PPM
, 0);
279 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
280 AR_PHY_TIMING4_ENABLE_PILOT_MASK
, 0);
281 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
282 AR_PHY_TIMING4_ENABLE_CHAN_MASK
, 0);
283 REG_RMW_FIELD(ah
, AR_PHY_PILOT_SPUR_MASK
,
284 AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A
, 0);
285 REG_RMW_FIELD(ah
, AR_PHY_SPUR_MASK_A
,
286 AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A
, 0);
287 REG_RMW_FIELD(ah
, AR_PHY_CHAN_SPUR_MASK
,
288 AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A
, 0);
289 REG_RMW_FIELD(ah
, AR_PHY_PILOT_SPUR_MASK
,
290 AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A
, 0);
291 REG_RMW_FIELD(ah
, AR_PHY_CHAN_SPUR_MASK
,
292 AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A
, 0);
293 REG_RMW_FIELD(ah
, AR_PHY_SPUR_MASK_A
,
294 AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A
, 0);
295 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
296 AR_PHY_SPUR_REG_MASK_RATE_CNTL
, 0);
299 static void ar9003_hw_spur_ofdm(struct ath_hw
*ah
,
302 int spur_delta_phase
,
303 int spur_subchannel_sd
)
307 /* OFDM Spur mitigation */
308 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
309 AR_PHY_TIMING4_ENABLE_SPUR_FILTER
, 0x1);
310 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
311 AR_PHY_TIMING11_SPUR_FREQ_SD
, spur_freq_sd
);
312 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
313 AR_PHY_TIMING11_SPUR_DELTA_PHASE
, spur_delta_phase
);
314 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_EXT
,
315 AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD
, spur_subchannel_sd
);
316 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
317 AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC
, 0x1);
318 REG_RMW_FIELD(ah
, AR_PHY_TIMING11
,
319 AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR
, 0x1);
320 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
321 AR_PHY_TIMING4_ENABLE_SPUR_RSSI
, 0x1);
322 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
323 AR_PHY_SPUR_REG_SPUR_RSSI_THRESH
, 34);
324 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
325 AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI
, 1);
327 if (REG_READ_FIELD(ah
, AR_PHY_MODE
,
328 AR_PHY_MODE_DYNAMIC
) == 0x1)
329 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
330 AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT
, 1);
332 mask_index
= (freq_offset
<< 4) / 5;
334 mask_index
= mask_index
- 1;
336 mask_index
= mask_index
& 0x7f;
338 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
339 AR_PHY_SPUR_REG_ENABLE_MASK_PPM
, 0x1);
340 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
341 AR_PHY_TIMING4_ENABLE_PILOT_MASK
, 0x1);
342 REG_RMW_FIELD(ah
, AR_PHY_TIMING4
,
343 AR_PHY_TIMING4_ENABLE_CHAN_MASK
, 0x1);
344 REG_RMW_FIELD(ah
, AR_PHY_PILOT_SPUR_MASK
,
345 AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A
, mask_index
);
346 REG_RMW_FIELD(ah
, AR_PHY_SPUR_MASK_A
,
347 AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A
, mask_index
);
348 REG_RMW_FIELD(ah
, AR_PHY_CHAN_SPUR_MASK
,
349 AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A
, mask_index
);
350 REG_RMW_FIELD(ah
, AR_PHY_PILOT_SPUR_MASK
,
351 AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A
, 0xc);
352 REG_RMW_FIELD(ah
, AR_PHY_CHAN_SPUR_MASK
,
353 AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A
, 0xc);
354 REG_RMW_FIELD(ah
, AR_PHY_SPUR_MASK_A
,
355 AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A
, 0xa0);
356 REG_RMW_FIELD(ah
, AR_PHY_SPUR_REG
,
357 AR_PHY_SPUR_REG_MASK_RATE_CNTL
, 0xff);
360 static void ar9003_hw_spur_ofdm_work(struct ath_hw
*ah
,
361 struct ath9k_channel
*chan
,
364 int spur_freq_sd
= 0;
365 int spur_subchannel_sd
= 0;
366 int spur_delta_phase
= 0;
368 if (IS_CHAN_HT40(chan
)) {
369 if (freq_offset
< 0) {
370 if (REG_READ_FIELD(ah
, AR_PHY_GEN_CTRL
,
371 AR_PHY_GC_DYN2040_PRI_CH
) == 0x0)
372 spur_subchannel_sd
= 1;
374 spur_subchannel_sd
= 0;
376 spur_freq_sd
= (freq_offset
<< 9) / 11;
379 if (REG_READ_FIELD(ah
, AR_PHY_GEN_CTRL
,
380 AR_PHY_GC_DYN2040_PRI_CH
) == 0x0)
381 spur_subchannel_sd
= 0;
383 spur_subchannel_sd
= 1;
385 spur_freq_sd
= (freq_offset
<< 9) / 11;
389 spur_delta_phase
= (freq_offset
<< 17) / 5;
392 spur_subchannel_sd
= 0;
393 spur_freq_sd
= (freq_offset
<< 9) /11;
394 spur_delta_phase
= (freq_offset
<< 18) / 5;
397 spur_freq_sd
= spur_freq_sd
& 0x3ff;
398 spur_delta_phase
= spur_delta_phase
& 0xfffff;
400 ar9003_hw_spur_ofdm(ah
,
407 /* Spur mitigation for OFDM */
408 static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw
*ah
,
409 struct ath9k_channel
*chan
)
417 struct ar9300_eeprom
*eep
= &ah
->eeprom
.ar9300_eep
;
419 if (IS_CHAN_5GHZ(chan
)) {
420 spurChansPtr
= &(eep
->modalHeader5G
.spurChans
[0]);
424 spurChansPtr
= &(eep
->modalHeader2G
.spurChans
[0]);
428 if (spurChansPtr
[0] == 0)
429 return; /* No spur in the mode */
431 if (IS_CHAN_HT40(chan
)) {
433 if (REG_READ_FIELD(ah
, AR_PHY_GEN_CTRL
,
434 AR_PHY_GC_DYN2040_PRI_CH
) == 0x0)
435 synth_freq
= chan
->channel
- 10;
437 synth_freq
= chan
->channel
+ 10;
440 synth_freq
= chan
->channel
;
443 ar9003_hw_spur_ofdm_clear(ah
);
445 for (i
= 0; i
< AR_EEPROM_MODAL_SPURS
&& spurChansPtr
[i
]; i
++) {
446 freq_offset
= FBIN2FREQ(spurChansPtr
[i
], mode
) - synth_freq
;
447 if (abs(freq_offset
) < range
) {
448 ar9003_hw_spur_ofdm_work(ah
, chan
, freq_offset
);
454 static void ar9003_hw_spur_mitigate(struct ath_hw
*ah
,
455 struct ath9k_channel
*chan
)
457 ar9003_hw_spur_mitigate_mrc_cck(ah
, chan
);
458 ar9003_hw_spur_mitigate_ofdm(ah
, chan
);
461 static u32
ar9003_hw_compute_pll_control(struct ath_hw
*ah
,
462 struct ath9k_channel
*chan
)
466 pll
= SM(0x5, AR_RTC_9300_PLL_REFDIV
);
468 if (chan
&& IS_CHAN_HALF_RATE(chan
))
469 pll
|= SM(0x1, AR_RTC_9300_PLL_CLKSEL
);
470 else if (chan
&& IS_CHAN_QUARTER_RATE(chan
))
471 pll
|= SM(0x2, AR_RTC_9300_PLL_CLKSEL
);
473 pll
|= SM(0x2c, AR_RTC_9300_PLL_DIV
);
478 static void ar9003_hw_set_channel_regs(struct ath_hw
*ah
,
479 struct ath9k_channel
*chan
)
482 u32 enableDacFifo
= 0;
485 (REG_READ(ah
, AR_PHY_GEN_CTRL
) & AR_PHY_GC_ENABLE_DAC_FIFO
);
487 /* Enable 11n HT, 20 MHz */
488 phymode
= AR_PHY_GC_HT_EN
| AR_PHY_GC_SINGLE_HT_LTF1
|
489 AR_PHY_GC_SHORT_GI_40
| enableDacFifo
;
491 /* Configure baseband for dynamic 20/40 operation */
492 if (IS_CHAN_HT40(chan
)) {
493 phymode
|= AR_PHY_GC_DYN2040_EN
;
494 /* Configure control (primary) channel at +-10MHz */
495 if ((chan
->chanmode
== CHANNEL_A_HT40PLUS
) ||
496 (chan
->chanmode
== CHANNEL_G_HT40PLUS
))
497 phymode
|= AR_PHY_GC_DYN2040_PRI_CH
;
501 /* make sure we preserve INI settings */
502 phymode
|= REG_READ(ah
, AR_PHY_GEN_CTRL
);
503 /* turn off Green Field detection for STA for now */
504 phymode
&= ~AR_PHY_GC_GF_DETECT_EN
;
506 REG_WRITE(ah
, AR_PHY_GEN_CTRL
, phymode
);
508 /* Configure MAC for 20/40 operation */
509 ath9k_hw_set11nmac2040(ah
);
511 /* global transmit timeout (25 TUs default)*/
512 REG_WRITE(ah
, AR_GTXTO
, 25 << AR_GTXTO_TIMEOUT_LIMIT_S
);
513 /* carrier sense timeout */
514 REG_WRITE(ah
, AR_CST
, 0xF << AR_CST_TIMEOUT_LIMIT_S
);
517 static void ar9003_hw_init_bb(struct ath_hw
*ah
,
518 struct ath9k_channel
*chan
)
523 * Wait for the frequency synth to settle (synth goes on
524 * via AR_PHY_ACTIVE_EN). Read the phy active delay register.
525 * Value is in 100ns increments.
527 synthDelay
= REG_READ(ah
, AR_PHY_RX_DELAY
) & AR_PHY_RX_DELAY_DELAY
;
529 synthDelay
= (4 * synthDelay
) / 22;
533 /* Activate the PHY (includes baseband activate + synthesizer on) */
534 REG_WRITE(ah
, AR_PHY_ACTIVE
, AR_PHY_ACTIVE_EN
);
537 * There is an issue if the AP starts the calibration before
538 * the base band timeout completes. This could result in the
539 * rx_clear false triggering. As a workaround we add delay an
540 * extra BASE_ACTIVATE_DELAY usecs to ensure this condition
543 udelay(synthDelay
+ BASE_ACTIVATE_DELAY
);
546 static void ar9003_hw_set_chain_masks(struct ath_hw
*ah
, u8 rx
, u8 tx
)
550 REG_SET_BIT(ah
, AR_PHY_ANALOG_SWAP
,
551 AR_PHY_SWAP_ALT_CHAIN
);
556 REG_WRITE(ah
, AR_PHY_RX_CHAINMASK
, rx
);
557 REG_WRITE(ah
, AR_PHY_CAL_CHAINMASK
, rx
);
563 if ((ah
->caps
.hw_caps
& ATH9K_HW_CAP_APM
) && (tx
== 0x7))
564 REG_WRITE(ah
, AR_SELFGEN_MASK
, 0x3);
565 else if (AR_SREV_9462(ah
))
566 /* xxx only when MCI support is enabled */
567 REG_WRITE(ah
, AR_SELFGEN_MASK
, 0x3);
569 REG_WRITE(ah
, AR_SELFGEN_MASK
, tx
);
572 REG_SET_BIT(ah
, AR_PHY_ANALOG_SWAP
,
573 AR_PHY_SWAP_ALT_CHAIN
);
578 * Override INI values with chip specific configuration.
580 static void ar9003_hw_override_ini(struct ath_hw
*ah
)
585 * Set the RX_ABORT and RX_DIS and clear it only after
586 * RXE is set for MAC. This prevents frames with
587 * corrupted descriptor status.
589 REG_SET_BIT(ah
, AR_DIAG_SW
, (AR_DIAG_RX_DIS
| AR_DIAG_RX_ABORT
));
592 * For AR9280 and above, there is a new feature that allows
593 * Multicast search based on both MAC Address and Key ID. By default,
594 * this feature is enabled. But since the driver is not using this
595 * feature, we switch it off; otherwise multicast search based on
596 * MAC addr only will fail.
598 val
= REG_READ(ah
, AR_PCU_MISC_MODE2
) & (~AR_ADHOC_MCAST_KEYID_ENABLE
);
599 REG_WRITE(ah
, AR_PCU_MISC_MODE2
,
600 val
| AR_AGG_WEP_ENABLE_FIX
| AR_AGG_WEP_ENABLE
);
602 REG_SET_BIT(ah
, AR_PHY_CCK_DETECT
,
603 AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV
);
606 static void ar9003_hw_prog_ini(struct ath_hw
*ah
,
607 struct ar5416IniArray
*iniArr
,
610 unsigned int i
, regWrites
= 0;
612 /* New INI format: Array may be undefined (pre, core, post arrays) */
613 if (!iniArr
->ia_array
)
617 * New INI format: Pre, core, and post arrays for a given subsystem
618 * may be modal (> 2 columns) or non-modal (2 columns). Determine if
619 * the array is non-modal and force the column to 1.
621 if (column
>= iniArr
->ia_columns
)
624 for (i
= 0; i
< iniArr
->ia_rows
; i
++) {
625 u32 reg
= INI_RA(iniArr
, i
, 0);
626 u32 val
= INI_RA(iniArr
, i
, column
);
628 REG_WRITE(ah
, reg
, val
);
634 static int ar9003_hw_process_ini(struct ath_hw
*ah
,
635 struct ath9k_channel
*chan
)
637 unsigned int regWrites
= 0, i
;
640 switch (chan
->chanmode
) {
645 case CHANNEL_A_HT40PLUS
:
646 case CHANNEL_A_HT40MINUS
:
654 case CHANNEL_G_HT40PLUS
:
655 case CHANNEL_G_HT40MINUS
:
663 for (i
= 0; i
< ATH_INI_NUM_SPLIT
; i
++) {
664 ar9003_hw_prog_ini(ah
, &ah
->iniSOC
[i
], modesIndex
);
665 ar9003_hw_prog_ini(ah
, &ah
->iniMac
[i
], modesIndex
);
666 ar9003_hw_prog_ini(ah
, &ah
->iniBB
[i
], modesIndex
);
667 ar9003_hw_prog_ini(ah
, &ah
->iniRadio
[i
], modesIndex
);
668 if (i
== ATH_INI_POST
&& AR_SREV_9462_20(ah
))
669 ar9003_hw_prog_ini(ah
,
670 &ah
->ini_radio_post_sys2ant
,
674 REG_WRITE_ARRAY(&ah
->iniModesRxGain
, 1, regWrites
);
675 REG_WRITE_ARRAY(&ah
->iniModesTxGain
, modesIndex
, regWrites
);
678 * For 5GHz channels requiring Fast Clock, apply
679 * different modal values.
681 if (IS_CHAN_A_FAST_CLOCK(ah
, chan
))
682 REG_WRITE_ARRAY(&ah
->iniModesAdditional
,
683 modesIndex
, regWrites
);
685 if (AR_SREV_9330(ah
))
686 REG_WRITE_ARRAY(&ah
->iniModesAdditional
, 1, regWrites
);
688 if (AR_SREV_9340(ah
) && !ah
->is_clk_25mhz
)
689 REG_WRITE_ARRAY(&ah
->iniModesAdditional_40M
, 1, regWrites
);
691 if (AR_SREV_9462(ah
))
692 ar9003_hw_prog_ini(ah
, &ah
->ini_BTCOEX_MAX_TXPWR
, 1);
694 ah
->modes_index
= modesIndex
;
695 ar9003_hw_override_ini(ah
);
696 ar9003_hw_set_channel_regs(ah
, chan
);
697 ar9003_hw_set_chain_masks(ah
, ah
->rxchainmask
, ah
->txchainmask
);
698 ath9k_hw_apply_txpower(ah
, chan
);
700 if (AR_SREV_9462(ah
)) {
701 if (REG_READ_FIELD(ah
, AR_PHY_TX_IQCAL_CONTROL_0
,
702 AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL
))
703 ah
->enabled_cals
|= TX_IQ_CAL
;
705 ah
->enabled_cals
&= ~TX_IQ_CAL
;
707 if (REG_READ(ah
, AR_PHY_CL_CAL_CTL
) & AR_PHY_CL_CAL_ENABLE
)
708 ah
->enabled_cals
|= TX_CL_CAL
;
710 ah
->enabled_cals
&= ~TX_CL_CAL
;
716 static void ar9003_hw_set_rfmode(struct ath_hw
*ah
,
717 struct ath9k_channel
*chan
)
724 rfMode
|= (IS_CHAN_B(chan
) || IS_CHAN_G(chan
))
725 ? AR_PHY_MODE_DYNAMIC
: AR_PHY_MODE_OFDM
;
727 if (IS_CHAN_A_FAST_CLOCK(ah
, chan
))
728 rfMode
|= (AR_PHY_MODE_DYNAMIC
| AR_PHY_MODE_DYN_CCK_DISABLE
);
730 REG_WRITE(ah
, AR_PHY_MODE
, rfMode
);
733 static void ar9003_hw_mark_phy_inactive(struct ath_hw
*ah
)
735 REG_WRITE(ah
, AR_PHY_ACTIVE
, AR_PHY_ACTIVE_DIS
);
738 static void ar9003_hw_set_delta_slope(struct ath_hw
*ah
,
739 struct ath9k_channel
*chan
)
741 u32 coef_scaled
, ds_coef_exp
, ds_coef_man
;
742 u32 clockMhzScaled
= 0x64000000;
743 struct chan_centers centers
;
746 * half and quarter rate can divide the scaled clock by 2 or 4
747 * scale for selected channel bandwidth
749 if (IS_CHAN_HALF_RATE(chan
))
750 clockMhzScaled
= clockMhzScaled
>> 1;
751 else if (IS_CHAN_QUARTER_RATE(chan
))
752 clockMhzScaled
= clockMhzScaled
>> 2;
755 * ALGO -> coef = 1e8/fcarrier*fclock/40;
756 * scaled coef to provide precision for this floating calculation
758 ath9k_hw_get_channel_centers(ah
, chan
, ¢ers
);
759 coef_scaled
= clockMhzScaled
/ centers
.synth_center
;
761 ath9k_hw_get_delta_slope_vals(ah
, coef_scaled
, &ds_coef_man
,
764 REG_RMW_FIELD(ah
, AR_PHY_TIMING3
,
765 AR_PHY_TIMING3_DSC_MAN
, ds_coef_man
);
766 REG_RMW_FIELD(ah
, AR_PHY_TIMING3
,
767 AR_PHY_TIMING3_DSC_EXP
, ds_coef_exp
);
771 * scaled coeff is 9/10 that of normal coeff
773 coef_scaled
= (9 * coef_scaled
) / 10;
775 ath9k_hw_get_delta_slope_vals(ah
, coef_scaled
, &ds_coef_man
,
779 REG_RMW_FIELD(ah
, AR_PHY_SGI_DELTA
,
780 AR_PHY_SGI_DSC_MAN
, ds_coef_man
);
781 REG_RMW_FIELD(ah
, AR_PHY_SGI_DELTA
,
782 AR_PHY_SGI_DSC_EXP
, ds_coef_exp
);
785 static bool ar9003_hw_rfbus_req(struct ath_hw
*ah
)
787 REG_WRITE(ah
, AR_PHY_RFBUS_REQ
, AR_PHY_RFBUS_REQ_EN
);
788 return ath9k_hw_wait(ah
, AR_PHY_RFBUS_GRANT
, AR_PHY_RFBUS_GRANT_EN
,
789 AR_PHY_RFBUS_GRANT_EN
, AH_WAIT_TIMEOUT
);
793 * Wait for the frequency synth to settle (synth goes on via PHY_ACTIVE_EN).
794 * Read the phy active delay register. Value is in 100ns increments.
796 static void ar9003_hw_rfbus_done(struct ath_hw
*ah
)
798 u32 synthDelay
= REG_READ(ah
, AR_PHY_RX_DELAY
) & AR_PHY_RX_DELAY_DELAY
;
799 if (IS_CHAN_B(ah
->curchan
))
800 synthDelay
= (4 * synthDelay
) / 22;
804 udelay(synthDelay
+ BASE_ACTIVATE_DELAY
);
806 REG_WRITE(ah
, AR_PHY_RFBUS_REQ
, 0);
809 static bool ar9003_hw_ani_control(struct ath_hw
*ah
,
810 enum ath9k_ani_cmd cmd
, int param
)
812 struct ath_common
*common
= ath9k_hw_common(ah
);
813 struct ath9k_channel
*chan
= ah
->curchan
;
814 struct ar5416AniState
*aniState
= &chan
->ani
;
817 switch (cmd
& ah
->ani_function
) {
818 case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION
:{
820 * on == 1 means ofdm weak signal detection is ON
821 * on == 1 is the default, for less noise immunity
823 * on == 0 means ofdm weak signal detection is OFF
824 * on == 0 means more noise imm
826 u32 on
= param
? 1 : 0;
828 * make register setting for default
829 * (weak sig detect ON) come from INI file
831 int m1ThreshLow
= on
?
832 aniState
->iniDef
.m1ThreshLow
: m1ThreshLow_off
;
833 int m2ThreshLow
= on
?
834 aniState
->iniDef
.m2ThreshLow
: m2ThreshLow_off
;
836 aniState
->iniDef
.m1Thresh
: m1Thresh_off
;
838 aniState
->iniDef
.m2Thresh
: m2Thresh_off
;
839 int m2CountThr
= on
?
840 aniState
->iniDef
.m2CountThr
: m2CountThr_off
;
841 int m2CountThrLow
= on
?
842 aniState
->iniDef
.m2CountThrLow
: m2CountThrLow_off
;
843 int m1ThreshLowExt
= on
?
844 aniState
->iniDef
.m1ThreshLowExt
: m1ThreshLowExt_off
;
845 int m2ThreshLowExt
= on
?
846 aniState
->iniDef
.m2ThreshLowExt
: m2ThreshLowExt_off
;
847 int m1ThreshExt
= on
?
848 aniState
->iniDef
.m1ThreshExt
: m1ThreshExt_off
;
849 int m2ThreshExt
= on
?
850 aniState
->iniDef
.m2ThreshExt
: m2ThreshExt_off
;
852 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_LOW
,
853 AR_PHY_SFCORR_LOW_M1_THRESH_LOW
,
855 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_LOW
,
856 AR_PHY_SFCORR_LOW_M2_THRESH_LOW
,
858 REG_RMW_FIELD(ah
, AR_PHY_SFCORR
,
859 AR_PHY_SFCORR_M1_THRESH
, m1Thresh
);
860 REG_RMW_FIELD(ah
, AR_PHY_SFCORR
,
861 AR_PHY_SFCORR_M2_THRESH
, m2Thresh
);
862 REG_RMW_FIELD(ah
, AR_PHY_SFCORR
,
863 AR_PHY_SFCORR_M2COUNT_THR
, m2CountThr
);
864 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_LOW
,
865 AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW
,
868 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_EXT
,
869 AR_PHY_SFCORR_EXT_M1_THRESH_LOW
, m1ThreshLowExt
);
870 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_EXT
,
871 AR_PHY_SFCORR_EXT_M2_THRESH_LOW
, m2ThreshLowExt
);
872 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_EXT
,
873 AR_PHY_SFCORR_EXT_M1_THRESH
, m1ThreshExt
);
874 REG_RMW_FIELD(ah
, AR_PHY_SFCORR_EXT
,
875 AR_PHY_SFCORR_EXT_M2_THRESH
, m2ThreshExt
);
878 REG_SET_BIT(ah
, AR_PHY_SFCORR_LOW
,
879 AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW
);
881 REG_CLR_BIT(ah
, AR_PHY_SFCORR_LOW
,
882 AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW
);
884 if (!on
!= aniState
->ofdmWeakSigDetectOff
) {
886 "** ch %d: ofdm weak signal: %s=>%s\n",
888 !aniState
->ofdmWeakSigDetectOff
?
892 ah
->stats
.ast_ani_ofdmon
++;
894 ah
->stats
.ast_ani_ofdmoff
++;
895 aniState
->ofdmWeakSigDetectOff
= !on
;
899 case ATH9K_ANI_FIRSTEP_LEVEL
:{
902 if (level
>= ARRAY_SIZE(firstep_table
)) {
904 "ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n",
905 level
, ARRAY_SIZE(firstep_table
));
910 * make register setting relative to default
911 * from INI file & cap value
913 value
= firstep_table
[level
] -
914 firstep_table
[ATH9K_ANI_FIRSTEP_LVL_NEW
] +
915 aniState
->iniDef
.firstep
;
916 if (value
< ATH9K_SIG_FIRSTEP_SETTING_MIN
)
917 value
= ATH9K_SIG_FIRSTEP_SETTING_MIN
;
918 if (value
> ATH9K_SIG_FIRSTEP_SETTING_MAX
)
919 value
= ATH9K_SIG_FIRSTEP_SETTING_MAX
;
920 REG_RMW_FIELD(ah
, AR_PHY_FIND_SIG
,
921 AR_PHY_FIND_SIG_FIRSTEP
,
924 * we need to set first step low register too
925 * make register setting relative to default
926 * from INI file & cap value
928 value2
= firstep_table
[level
] -
929 firstep_table
[ATH9K_ANI_FIRSTEP_LVL_NEW
] +
930 aniState
->iniDef
.firstepLow
;
931 if (value2
< ATH9K_SIG_FIRSTEP_SETTING_MIN
)
932 value2
= ATH9K_SIG_FIRSTEP_SETTING_MIN
;
933 if (value2
> ATH9K_SIG_FIRSTEP_SETTING_MAX
)
934 value2
= ATH9K_SIG_FIRSTEP_SETTING_MAX
;
936 REG_RMW_FIELD(ah
, AR_PHY_FIND_SIG_LOW
,
937 AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW
, value2
);
939 if (level
!= aniState
->firstepLevel
) {
941 "** ch %d: level %d=>%d[def:%d] firstep[level]=%d ini=%d\n",
943 aniState
->firstepLevel
,
945 ATH9K_ANI_FIRSTEP_LVL_NEW
,
947 aniState
->iniDef
.firstep
);
949 "** ch %d: level %d=>%d[def:%d] firstep_low[level]=%d ini=%d\n",
951 aniState
->firstepLevel
,
953 ATH9K_ANI_FIRSTEP_LVL_NEW
,
955 aniState
->iniDef
.firstepLow
);
956 if (level
> aniState
->firstepLevel
)
957 ah
->stats
.ast_ani_stepup
++;
958 else if (level
< aniState
->firstepLevel
)
959 ah
->stats
.ast_ani_stepdown
++;
960 aniState
->firstepLevel
= level
;
964 case ATH9K_ANI_SPUR_IMMUNITY_LEVEL
:{
967 if (level
>= ARRAY_SIZE(cycpwrThr1_table
)) {
969 "ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level out of range (%u > %zu)\n",
970 level
, ARRAY_SIZE(cycpwrThr1_table
));
974 * make register setting relative to default
975 * from INI file & cap value
977 value
= cycpwrThr1_table
[level
] -
978 cycpwrThr1_table
[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW
] +
979 aniState
->iniDef
.cycpwrThr1
;
980 if (value
< ATH9K_SIG_SPUR_IMM_SETTING_MIN
)
981 value
= ATH9K_SIG_SPUR_IMM_SETTING_MIN
;
982 if (value
> ATH9K_SIG_SPUR_IMM_SETTING_MAX
)
983 value
= ATH9K_SIG_SPUR_IMM_SETTING_MAX
;
984 REG_RMW_FIELD(ah
, AR_PHY_TIMING5
,
985 AR_PHY_TIMING5_CYCPWR_THR1
,
989 * set AR_PHY_EXT_CCA for extension channel
990 * make register setting relative to default
991 * from INI file & cap value
993 value2
= cycpwrThr1_table
[level
] -
994 cycpwrThr1_table
[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW
] +
995 aniState
->iniDef
.cycpwrThr1Ext
;
996 if (value2
< ATH9K_SIG_SPUR_IMM_SETTING_MIN
)
997 value2
= ATH9K_SIG_SPUR_IMM_SETTING_MIN
;
998 if (value2
> ATH9K_SIG_SPUR_IMM_SETTING_MAX
)
999 value2
= ATH9K_SIG_SPUR_IMM_SETTING_MAX
;
1000 REG_RMW_FIELD(ah
, AR_PHY_EXT_CCA
,
1001 AR_PHY_EXT_CYCPWR_THR1
, value2
);
1003 if (level
!= aniState
->spurImmunityLevel
) {
1004 ath_dbg(common
, ANI
,
1005 "** ch %d: level %d=>%d[def:%d] cycpwrThr1[level]=%d ini=%d\n",
1007 aniState
->spurImmunityLevel
,
1009 ATH9K_ANI_SPUR_IMMUNE_LVL_NEW
,
1011 aniState
->iniDef
.cycpwrThr1
);
1012 ath_dbg(common
, ANI
,
1013 "** ch %d: level %d=>%d[def:%d] cycpwrThr1Ext[level]=%d ini=%d\n",
1015 aniState
->spurImmunityLevel
,
1017 ATH9K_ANI_SPUR_IMMUNE_LVL_NEW
,
1019 aniState
->iniDef
.cycpwrThr1Ext
);
1020 if (level
> aniState
->spurImmunityLevel
)
1021 ah
->stats
.ast_ani_spurup
++;
1022 else if (level
< aniState
->spurImmunityLevel
)
1023 ah
->stats
.ast_ani_spurdown
++;
1024 aniState
->spurImmunityLevel
= level
;
1028 case ATH9K_ANI_MRC_CCK
:{
1030 * is_on == 1 means MRC CCK ON (default, less noise imm)
1031 * is_on == 0 means MRC CCK is OFF (more noise imm)
1033 bool is_on
= param
? 1 : 0;
1034 REG_RMW_FIELD(ah
, AR_PHY_MRC_CCK_CTRL
,
1035 AR_PHY_MRC_CCK_ENABLE
, is_on
);
1036 REG_RMW_FIELD(ah
, AR_PHY_MRC_CCK_CTRL
,
1037 AR_PHY_MRC_CCK_MUX_REG
, is_on
);
1038 if (!is_on
!= aniState
->mrcCCKOff
) {
1039 ath_dbg(common
, ANI
, "** ch %d: MRC CCK: %s=>%s\n",
1041 !aniState
->mrcCCKOff
? "on" : "off",
1042 is_on
? "on" : "off");
1044 ah
->stats
.ast_ani_ccklow
++;
1046 ah
->stats
.ast_ani_cckhigh
++;
1047 aniState
->mrcCCKOff
= !is_on
;
1051 case ATH9K_ANI_PRESENT
:
1054 ath_dbg(common
, ANI
, "invalid cmd %u\n", cmd
);
1058 ath_dbg(common
, ANI
,
1059 "ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
1060 aniState
->spurImmunityLevel
,
1061 !aniState
->ofdmWeakSigDetectOff
? "on" : "off",
1062 aniState
->firstepLevel
,
1063 !aniState
->mrcCCKOff
? "on" : "off",
1064 aniState
->listenTime
,
1065 aniState
->ofdmPhyErrCount
,
1066 aniState
->cckPhyErrCount
);
1070 static void ar9003_hw_do_getnf(struct ath_hw
*ah
,
1071 int16_t nfarray
[NUM_NF_READINGS
])
1073 #define AR_PHY_CH_MINCCA_PWR 0x1FF00000
1074 #define AR_PHY_CH_MINCCA_PWR_S 20
1075 #define AR_PHY_CH_EXT_MINCCA_PWR 0x01FF0000
1076 #define AR_PHY_CH_EXT_MINCCA_PWR_S 16
1081 for (i
= 0; i
< AR9300_MAX_CHAINS
; i
++) {
1082 if (ah
->rxchainmask
& BIT(i
)) {
1083 nf
= MS(REG_READ(ah
, ah
->nf_regs
[i
]),
1084 AR_PHY_CH_MINCCA_PWR
);
1085 nfarray
[i
] = sign_extend32(nf
, 8);
1087 if (IS_CHAN_HT40(ah
->curchan
)) {
1088 u8 ext_idx
= AR9300_MAX_CHAINS
+ i
;
1090 nf
= MS(REG_READ(ah
, ah
->nf_regs
[ext_idx
]),
1091 AR_PHY_CH_EXT_MINCCA_PWR
);
1092 nfarray
[ext_idx
] = sign_extend32(nf
, 8);
1098 static void ar9003_hw_set_nf_limits(struct ath_hw
*ah
)
1100 ah
->nf_2g
.max
= AR_PHY_CCA_MAX_GOOD_VAL_9300_2GHZ
;
1101 ah
->nf_2g
.min
= AR_PHY_CCA_MIN_GOOD_VAL_9300_2GHZ
;
1102 if (AR_SREV_9330(ah
))
1103 ah
->nf_2g
.nominal
= AR_PHY_CCA_NOM_VAL_9330_2GHZ
;
1105 ah
->nf_2g
.nominal
= AR_PHY_CCA_NOM_VAL_9300_2GHZ
;
1106 ah
->nf_5g
.max
= AR_PHY_CCA_MAX_GOOD_VAL_9300_5GHZ
;
1107 ah
->nf_5g
.min
= AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ
;
1108 ah
->nf_5g
.nominal
= AR_PHY_CCA_NOM_VAL_9300_5GHZ
;
1112 * Initialize the ANI register values with default (ini) values.
1113 * This routine is called during a (full) hardware reset after
1114 * all the registers are initialised from the INI.
1116 static void ar9003_hw_ani_cache_ini_regs(struct ath_hw
*ah
)
1118 struct ar5416AniState
*aniState
;
1119 struct ath_common
*common
= ath9k_hw_common(ah
);
1120 struct ath9k_channel
*chan
= ah
->curchan
;
1121 struct ath9k_ani_default
*iniDef
;
1124 aniState
= &ah
->curchan
->ani
;
1125 iniDef
= &aniState
->iniDef
;
1127 ath_dbg(common
, ANI
, "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
1128 ah
->hw_version
.macVersion
,
1129 ah
->hw_version
.macRev
,
1132 chan
->channelFlags
);
1134 val
= REG_READ(ah
, AR_PHY_SFCORR
);
1135 iniDef
->m1Thresh
= MS(val
, AR_PHY_SFCORR_M1_THRESH
);
1136 iniDef
->m2Thresh
= MS(val
, AR_PHY_SFCORR_M2_THRESH
);
1137 iniDef
->m2CountThr
= MS(val
, AR_PHY_SFCORR_M2COUNT_THR
);
1139 val
= REG_READ(ah
, AR_PHY_SFCORR_LOW
);
1140 iniDef
->m1ThreshLow
= MS(val
, AR_PHY_SFCORR_LOW_M1_THRESH_LOW
);
1141 iniDef
->m2ThreshLow
= MS(val
, AR_PHY_SFCORR_LOW_M2_THRESH_LOW
);
1142 iniDef
->m2CountThrLow
= MS(val
, AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW
);
1144 val
= REG_READ(ah
, AR_PHY_SFCORR_EXT
);
1145 iniDef
->m1ThreshExt
= MS(val
, AR_PHY_SFCORR_EXT_M1_THRESH
);
1146 iniDef
->m2ThreshExt
= MS(val
, AR_PHY_SFCORR_EXT_M2_THRESH
);
1147 iniDef
->m1ThreshLowExt
= MS(val
, AR_PHY_SFCORR_EXT_M1_THRESH_LOW
);
1148 iniDef
->m2ThreshLowExt
= MS(val
, AR_PHY_SFCORR_EXT_M2_THRESH_LOW
);
1149 iniDef
->firstep
= REG_READ_FIELD(ah
,
1151 AR_PHY_FIND_SIG_FIRSTEP
);
1152 iniDef
->firstepLow
= REG_READ_FIELD(ah
,
1153 AR_PHY_FIND_SIG_LOW
,
1154 AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW
);
1155 iniDef
->cycpwrThr1
= REG_READ_FIELD(ah
,
1157 AR_PHY_TIMING5_CYCPWR_THR1
);
1158 iniDef
->cycpwrThr1Ext
= REG_READ_FIELD(ah
,
1160 AR_PHY_EXT_CYCPWR_THR1
);
1162 /* these levels just got reset to defaults by the INI */
1163 aniState
->spurImmunityLevel
= ATH9K_ANI_SPUR_IMMUNE_LVL_NEW
;
1164 aniState
->firstepLevel
= ATH9K_ANI_FIRSTEP_LVL_NEW
;
1165 aniState
->ofdmWeakSigDetectOff
= !ATH9K_ANI_USE_OFDM_WEAK_SIG
;
1166 aniState
->mrcCCKOff
= !ATH9K_ANI_ENABLE_MRC_CCK
;
1169 static void ar9003_hw_set_radar_params(struct ath_hw
*ah
,
1170 struct ath_hw_radar_conf
*conf
)
1172 u32 radar_0
= 0, radar_1
= 0;
1175 REG_CLR_BIT(ah
, AR_PHY_RADAR_0
, AR_PHY_RADAR_0_ENA
);
1179 radar_0
|= AR_PHY_RADAR_0_ENA
| AR_PHY_RADAR_0_FFT_ENA
;
1180 radar_0
|= SM(conf
->fir_power
, AR_PHY_RADAR_0_FIRPWR
);
1181 radar_0
|= SM(conf
->radar_rssi
, AR_PHY_RADAR_0_RRSSI
);
1182 radar_0
|= SM(conf
->pulse_height
, AR_PHY_RADAR_0_HEIGHT
);
1183 radar_0
|= SM(conf
->pulse_rssi
, AR_PHY_RADAR_0_PRSSI
);
1184 radar_0
|= SM(conf
->pulse_inband
, AR_PHY_RADAR_0_INBAND
);
1186 radar_1
|= AR_PHY_RADAR_1_MAX_RRSSI
;
1187 radar_1
|= AR_PHY_RADAR_1_BLOCK_CHECK
;
1188 radar_1
|= SM(conf
->pulse_maxlen
, AR_PHY_RADAR_1_MAXLEN
);
1189 radar_1
|= SM(conf
->pulse_inband_step
, AR_PHY_RADAR_1_RELSTEP_THRESH
);
1190 radar_1
|= SM(conf
->radar_inband
, AR_PHY_RADAR_1_RELPWR_THRESH
);
1192 REG_WRITE(ah
, AR_PHY_RADAR_0
, radar_0
);
1193 REG_WRITE(ah
, AR_PHY_RADAR_1
, radar_1
);
1194 if (conf
->ext_channel
)
1195 REG_SET_BIT(ah
, AR_PHY_RADAR_EXT
, AR_PHY_RADAR_EXT_ENA
);
1197 REG_CLR_BIT(ah
, AR_PHY_RADAR_EXT
, AR_PHY_RADAR_EXT_ENA
);
1200 static void ar9003_hw_set_radar_conf(struct ath_hw
*ah
)
1202 struct ath_hw_radar_conf
*conf
= &ah
->radar_conf
;
1204 conf
->fir_power
= -28;
1205 conf
->radar_rssi
= 0;
1206 conf
->pulse_height
= 10;
1207 conf
->pulse_rssi
= 24;
1208 conf
->pulse_inband
= 8;
1209 conf
->pulse_maxlen
= 255;
1210 conf
->pulse_inband_step
= 12;
1211 conf
->radar_inband
= 8;
1214 static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw
*ah
,
1215 struct ath_hw_antcomb_conf
*antconf
)
1219 regval
= REG_READ(ah
, AR_PHY_MC_GAIN_CTRL
);
1220 antconf
->main_lna_conf
= (regval
& AR_PHY_9485_ANT_DIV_MAIN_LNACONF
) >>
1221 AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S
;
1222 antconf
->alt_lna_conf
= (regval
& AR_PHY_9485_ANT_DIV_ALT_LNACONF
) >>
1223 AR_PHY_9485_ANT_DIV_ALT_LNACONF_S
;
1224 antconf
->fast_div_bias
= (regval
& AR_PHY_9485_ANT_FAST_DIV_BIAS
) >>
1225 AR_PHY_9485_ANT_FAST_DIV_BIAS_S
;
1227 if (AR_SREV_9330_11(ah
)) {
1228 antconf
->lna1_lna2_delta
= -9;
1229 antconf
->div_group
= 1;
1230 } else if (AR_SREV_9485(ah
)) {
1231 antconf
->lna1_lna2_delta
= -9;
1232 antconf
->div_group
= 2;
1234 antconf
->lna1_lna2_delta
= -3;
1235 antconf
->div_group
= 0;
1239 static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw
*ah
,
1240 struct ath_hw_antcomb_conf
*antconf
)
1244 regval
= REG_READ(ah
, AR_PHY_MC_GAIN_CTRL
);
1245 regval
&= ~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF
|
1246 AR_PHY_9485_ANT_DIV_ALT_LNACONF
|
1247 AR_PHY_9485_ANT_FAST_DIV_BIAS
|
1248 AR_PHY_9485_ANT_DIV_MAIN_GAINTB
|
1249 AR_PHY_9485_ANT_DIV_ALT_GAINTB
);
1250 regval
|= ((antconf
->main_lna_conf
<<
1251 AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S
)
1252 & AR_PHY_9485_ANT_DIV_MAIN_LNACONF
);
1253 regval
|= ((antconf
->alt_lna_conf
<< AR_PHY_9485_ANT_DIV_ALT_LNACONF_S
)
1254 & AR_PHY_9485_ANT_DIV_ALT_LNACONF
);
1255 regval
|= ((antconf
->fast_div_bias
<< AR_PHY_9485_ANT_FAST_DIV_BIAS_S
)
1256 & AR_PHY_9485_ANT_FAST_DIV_BIAS
);
1257 regval
|= ((antconf
->main_gaintb
<< AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S
)
1258 & AR_PHY_9485_ANT_DIV_MAIN_GAINTB
);
1259 regval
|= ((antconf
->alt_gaintb
<< AR_PHY_9485_ANT_DIV_ALT_GAINTB_S
)
1260 & AR_PHY_9485_ANT_DIV_ALT_GAINTB
);
1262 REG_WRITE(ah
, AR_PHY_MC_GAIN_CTRL
, regval
);
1265 static int ar9003_hw_fast_chan_change(struct ath_hw
*ah
,
1266 struct ath9k_channel
*chan
,
1269 unsigned int regWrites
= 0;
1272 switch (chan
->chanmode
) {
1274 case CHANNEL_A_HT20
:
1277 case CHANNEL_A_HT40PLUS
:
1278 case CHANNEL_A_HT40MINUS
:
1282 case CHANNEL_G_HT20
:
1286 case CHANNEL_G_HT40PLUS
:
1287 case CHANNEL_G_HT40MINUS
:
1295 if (modesIndex
== ah
->modes_index
) {
1296 *ini_reloaded
= false;
1300 ar9003_hw_prog_ini(ah
, &ah
->iniSOC
[ATH_INI_POST
], modesIndex
);
1301 ar9003_hw_prog_ini(ah
, &ah
->iniMac
[ATH_INI_POST
], modesIndex
);
1302 ar9003_hw_prog_ini(ah
, &ah
->iniBB
[ATH_INI_POST
], modesIndex
);
1303 ar9003_hw_prog_ini(ah
, &ah
->iniRadio
[ATH_INI_POST
], modesIndex
);
1304 if (AR_SREV_9462_20(ah
))
1305 ar9003_hw_prog_ini(ah
,
1306 &ah
->ini_radio_post_sys2ant
,
1309 REG_WRITE_ARRAY(&ah
->iniModesTxGain
, modesIndex
, regWrites
);
1312 * For 5GHz channels requiring Fast Clock, apply
1313 * different modal values.
1315 if (IS_CHAN_A_FAST_CLOCK(ah
, chan
))
1316 REG_WRITE_ARRAY(&ah
->iniModesAdditional
, modesIndex
, regWrites
);
1318 if (AR_SREV_9330(ah
))
1319 REG_WRITE_ARRAY(&ah
->iniModesAdditional
, 1, regWrites
);
1321 if (AR_SREV_9340(ah
) && !ah
->is_clk_25mhz
)
1322 REG_WRITE_ARRAY(&ah
->iniModesAdditional_40M
, 1, regWrites
);
1324 ah
->modes_index
= modesIndex
;
1325 *ini_reloaded
= true;
1328 ar9003_hw_set_rfmode(ah
, chan
);
1332 void ar9003_hw_attach_phy_ops(struct ath_hw
*ah
)
1334 struct ath_hw_private_ops
*priv_ops
= ath9k_hw_private_ops(ah
);
1335 struct ath_hw_ops
*ops
= ath9k_hw_ops(ah
);
1336 static const u32 ar9300_cca_regs
[6] = {
1345 priv_ops
->rf_set_freq
= ar9003_hw_set_channel
;
1346 priv_ops
->spur_mitigate_freq
= ar9003_hw_spur_mitigate
;
1347 priv_ops
->compute_pll_control
= ar9003_hw_compute_pll_control
;
1348 priv_ops
->set_channel_regs
= ar9003_hw_set_channel_regs
;
1349 priv_ops
->init_bb
= ar9003_hw_init_bb
;
1350 priv_ops
->process_ini
= ar9003_hw_process_ini
;
1351 priv_ops
->set_rfmode
= ar9003_hw_set_rfmode
;
1352 priv_ops
->mark_phy_inactive
= ar9003_hw_mark_phy_inactive
;
1353 priv_ops
->set_delta_slope
= ar9003_hw_set_delta_slope
;
1354 priv_ops
->rfbus_req
= ar9003_hw_rfbus_req
;
1355 priv_ops
->rfbus_done
= ar9003_hw_rfbus_done
;
1356 priv_ops
->ani_control
= ar9003_hw_ani_control
;
1357 priv_ops
->do_getnf
= ar9003_hw_do_getnf
;
1358 priv_ops
->ani_cache_ini_regs
= ar9003_hw_ani_cache_ini_regs
;
1359 priv_ops
->set_radar_params
= ar9003_hw_set_radar_params
;
1360 priv_ops
->fast_chan_change
= ar9003_hw_fast_chan_change
;
1362 ops
->antdiv_comb_conf_get
= ar9003_hw_antdiv_comb_conf_get
;
1363 ops
->antdiv_comb_conf_set
= ar9003_hw_antdiv_comb_conf_set
;
1365 ar9003_hw_set_nf_limits(ah
);
1366 ar9003_hw_set_radar_conf(ah
);
1367 memcpy(ah
->nf_regs
, ar9300_cca_regs
, sizeof(ah
->nf_regs
));
1370 void ar9003_hw_bb_watchdog_config(struct ath_hw
*ah
)
1372 struct ath_common
*common
= ath9k_hw_common(ah
);
1373 u32 idle_tmo_ms
= ah
->bb_watchdog_timeout_ms
;
1374 u32 val
, idle_count
;
1377 /* disable IRQ, disable chip-reset for BB panic */
1378 REG_WRITE(ah
, AR_PHY_WATCHDOG_CTL_2
,
1379 REG_READ(ah
, AR_PHY_WATCHDOG_CTL_2
) &
1380 ~(AR_PHY_WATCHDOG_RST_ENABLE
|
1381 AR_PHY_WATCHDOG_IRQ_ENABLE
));
1383 /* disable watchdog in non-IDLE mode, disable in IDLE mode */
1384 REG_WRITE(ah
, AR_PHY_WATCHDOG_CTL_1
,
1385 REG_READ(ah
, AR_PHY_WATCHDOG_CTL_1
) &
1386 ~(AR_PHY_WATCHDOG_NON_IDLE_ENABLE
|
1387 AR_PHY_WATCHDOG_IDLE_ENABLE
));
1389 ath_dbg(common
, RESET
, "Disabled BB Watchdog\n");
1393 /* enable IRQ, disable chip-reset for BB watchdog */
1394 val
= REG_READ(ah
, AR_PHY_WATCHDOG_CTL_2
) & AR_PHY_WATCHDOG_CNTL2_MASK
;
1395 REG_WRITE(ah
, AR_PHY_WATCHDOG_CTL_2
,
1396 (val
| AR_PHY_WATCHDOG_IRQ_ENABLE
) &
1397 ~AR_PHY_WATCHDOG_RST_ENABLE
);
1399 /* bound limit to 10 secs */
1400 if (idle_tmo_ms
> 10000)
1401 idle_tmo_ms
= 10000;
1404 * The time unit for watchdog event is 2^15 44/88MHz cycles.
1406 * For HT20 we have a time unit of 2^15/44 MHz = .74 ms per tick
1407 * For HT40 we have a time unit of 2^15/88 MHz = .37 ms per tick
1409 * Given we use fast clock now in 5 GHz, these time units should
1410 * be common for both 2 GHz and 5 GHz.
1412 idle_count
= (100 * idle_tmo_ms
) / 74;
1413 if (ah
->curchan
&& IS_CHAN_HT40(ah
->curchan
))
1414 idle_count
= (100 * idle_tmo_ms
) / 37;
1417 * enable watchdog in non-IDLE mode, disable in IDLE mode,
1418 * set idle time-out.
1420 REG_WRITE(ah
, AR_PHY_WATCHDOG_CTL_1
,
1421 AR_PHY_WATCHDOG_NON_IDLE_ENABLE
|
1422 AR_PHY_WATCHDOG_IDLE_MASK
|
1423 (AR_PHY_WATCHDOG_NON_IDLE_MASK
& (idle_count
<< 2)));
1425 ath_dbg(common
, RESET
, "Enabled BB Watchdog timeout (%u ms)\n",
1429 void ar9003_hw_bb_watchdog_read(struct ath_hw
*ah
)
1432 * we want to avoid printing in ISR context so we save the
1433 * watchdog status to be printed later in bottom half context.
1435 ah
->bb_watchdog_last_status
= REG_READ(ah
, AR_PHY_WATCHDOG_STATUS
);
1438 * the watchdog timer should reset on status read but to be sure
1439 * sure we write 0 to the watchdog status bit.
1441 REG_WRITE(ah
, AR_PHY_WATCHDOG_STATUS
,
1442 ah
->bb_watchdog_last_status
& ~AR_PHY_WATCHDOG_STATUS_CLR
);
1445 void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw
*ah
)
1447 struct ath_common
*common
= ath9k_hw_common(ah
);
1450 if (likely(!(common
->debug_mask
& ATH_DBG_RESET
)))
1453 status
= ah
->bb_watchdog_last_status
;
1454 ath_dbg(common
, RESET
,
1455 "\n==== BB update: BB status=0x%08x ====\n", status
);
1456 ath_dbg(common
, RESET
,
1457 "** BB state: wd=%u det=%u rdar=%u rOFDM=%d rCCK=%u tOFDM=%u tCCK=%u agc=%u src=%u **\n",
1458 MS(status
, AR_PHY_WATCHDOG_INFO
),
1459 MS(status
, AR_PHY_WATCHDOG_DET_HANG
),
1460 MS(status
, AR_PHY_WATCHDOG_RADAR_SM
),
1461 MS(status
, AR_PHY_WATCHDOG_RX_OFDM_SM
),
1462 MS(status
, AR_PHY_WATCHDOG_RX_CCK_SM
),
1463 MS(status
, AR_PHY_WATCHDOG_TX_OFDM_SM
),
1464 MS(status
, AR_PHY_WATCHDOG_TX_CCK_SM
),
1465 MS(status
, AR_PHY_WATCHDOG_AGC_SM
),
1466 MS(status
, AR_PHY_WATCHDOG_SRCH_SM
));
1468 ath_dbg(common
, RESET
, "** BB WD cntl: cntl1=0x%08x cntl2=0x%08x **\n",
1469 REG_READ(ah
, AR_PHY_WATCHDOG_CTL_1
),
1470 REG_READ(ah
, AR_PHY_WATCHDOG_CTL_2
));
1471 ath_dbg(common
, RESET
, "** BB mode: BB_gen_controls=0x%08x **\n",
1472 REG_READ(ah
, AR_PHY_GEN_CTRL
));
1474 #define PCT(_field) (common->cc_survey._field * 100 / common->cc_survey.cycles)
1475 if (common
->cc_survey
.cycles
)
1476 ath_dbg(common
, RESET
,
1477 "** BB busy times: rx_clear=%d%%, rx_frame=%d%%, tx_frame=%d%% **\n",
1478 PCT(rx_busy
), PCT(rx_frame
), PCT(tx_frame
));
1480 ath_dbg(common
, RESET
, "==== BB update: done ====\n\n");
1482 EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info
);
1484 void ar9003_hw_disable_phy_restart(struct ath_hw
*ah
)
1488 /* While receiving unsupported rate frame rx state machine
1489 * gets into a state 0xb and if phy_restart happens in that
1490 * state, BB would go hang. If RXSM is in 0xb state after
1491 * first bb panic, ensure to disable the phy_restart.
1493 if (!((MS(ah
->bb_watchdog_last_status
,
1494 AR_PHY_WATCHDOG_RX_OFDM_SM
) == 0xb) ||
1495 ah
->bb_hang_rx_ofdm
))
1498 ah
->bb_hang_rx_ofdm
= true;
1499 val
= REG_READ(ah
, AR_PHY_RESTART
);
1500 val
&= ~AR_PHY_RESTART_ENA
;
1502 REG_WRITE(ah
, AR_PHY_RESTART
, val
);
1504 EXPORT_SYMBOL(ar9003_hw_disable_phy_restart
);