| blob | e34a71e7d24204a0cc6dd0a3cb12fd043ec2636a |
1 /*
2 * Copyright (c) 2010 Broadcom Corporation
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
17 /*
18 * phy_hal.h: functionality exported from the phy to higher layers
19 */
21 #ifndef _BRCM_PHY_HAL_H_
22 #define _BRCM_PHY_HAL_H_
24 #include <brcmu_utils.h>
25 #include <brcmu_wifi.h>
26 #include <phy_shim.h>
28 #define IDCODE_VER_MASK 0x0000000f
29 #define IDCODE_VER_SHIFT 0
30 #define IDCODE_MFG_MASK 0x00000fff
31 #define IDCODE_MFG_SHIFT 0
32 #define IDCODE_ID_MASK 0x0ffff000
33 #define IDCODE_ID_SHIFT 12
34 #define IDCODE_REV_MASK 0xf0000000
35 #define IDCODE_REV_SHIFT 28
37 #define NORADIO_ID 0xe4f5
38 #define NORADIO_IDCODE 0x4e4f5246
40 #define BCM2055_ID 0x2055
41 #define BCM2055_IDCODE 0x02055000
42 #define BCM2055A0_IDCODE 0x1205517f
44 #define BCM2056_ID 0x2056
45 #define BCM2056_IDCODE 0x02056000
46 #define BCM2056A0_IDCODE 0x1205617f
48 #define BCM2057_ID 0x2057
49 #define BCM2057_IDCODE 0x02057000
50 #define BCM2057A0_IDCODE 0x1205717f
52 #define BCM2064_ID 0x2064
53 #define BCM2064_IDCODE 0x02064000
54 #define BCM2064A0_IDCODE 0x0206417f
56 #define PHY_TPC_HW_OFF false
57 #define PHY_TPC_HW_ON true
59 #define PHY_PERICAL_DRIVERUP 1
60 #define PHY_PERICAL_WATCHDOG 2
61 #define PHY_PERICAL_PHYINIT 3
62 #define PHY_PERICAL_JOIN_BSS 4
63 #define PHY_PERICAL_START_IBSS 5
64 #define PHY_PERICAL_UP_BSS 6
65 #define PHY_PERICAL_CHAN 7
66 #define PHY_FULLCAL 8
68 #define PHY_PERICAL_DISABLE 0
69 #define PHY_PERICAL_SPHASE 1
70 #define PHY_PERICAL_MPHASE 2
71 #define PHY_PERICAL_MANUAL 3
73 #define PHY_HOLD_FOR_ASSOC 1
74 #define PHY_HOLD_FOR_SCAN 2
75 #define PHY_HOLD_FOR_RM 4
76 #define PHY_HOLD_FOR_PLT 8
77 #define PHY_HOLD_FOR_MUTE 16
78 #define PHY_HOLD_FOR_NOT_ASSOC 0x20
80 #define PHY_MUTE_FOR_PREISM 1
81 #define PHY_MUTE_ALL 0xffffffff
83 #define PHY_NOISE_FIXED_VAL (-95)
84 #define PHY_NOISE_FIXED_VAL_NPHY (-92)
85 #define PHY_NOISE_FIXED_VAL_LCNPHY (-92)
87 #define PHY_MODE_CAL 0x0002
88 #define PHY_MODE_NOISEM 0x0004
90 #define BRCMS_TXPWR_DB_FACTOR 4
92 /* a large TX Power as an init value to factor out of min() calculations,
93 * keep low enough to fit in an s8, units are .25 dBm
94 */
97 #define BRCMS_NUM_RATES_CCK 4
98 #define BRCMS_NUM_RATES_OFDM 8
99 #define BRCMS_NUM_RATES_MCS_1_STREAM 8
100 #define BRCMS_NUM_RATES_MCS_2_STREAM 8
101 #define BRCMS_NUM_RATES_MCS_3_STREAM 8
102 #define BRCMS_NUM_RATES_MCS_4_STREAM 8
127 u8 mcs32;
128 };
131 u32 flags;
140 * without adjustment */
143 /* Index of the rate with the max target power */
145 /* User limit */
147 /* Regulatory power limit */
149 /* Max power board can support (SROM) */
151 /* Latest target power */
153 };
158 };
162 };
167 uint unit;
168 uint corerev;
169 u16 vid;
170 u16 did;
171 uint chip;
172 uint chiprev;
173 uint chippkg;
174 uint sromrev;
175 uint boardtype;
176 uint boardrev;
177 u32 boardflags;
178 u32 boardflags2;
179 };
204 u16 chanspec);
207 u16 newch);
230 uint band);
240 u16 chanspec);
255 u8 rxchain);
257 u8 rxchain);
262 u16 chanspec);
283 u8 txpwr_percent);
297 u8 mcs_offset);