spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / drivers / net / wireless / iwlwifi / iwl-agn-rxon.c
blob1c66594166216ead48f032417f34e10ea6ebd2f3
1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 #include "iwl-dev.h"
28 #include "iwl-agn.h"
29 #include "iwl-core.h"
30 #include "iwl-agn-calib.h"
31 #include "iwl-trans.h"
32 #include "iwl-shared.h"
34 static int iwlagn_disable_bss(struct iwl_priv *priv,
35 struct iwl_rxon_context *ctx,
36 struct iwl_rxon_cmd *send)
38 __le32 old_filter = send->filter_flags;
39 int ret;
41 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
42 ret = iwl_trans_send_cmd_pdu(trans(priv), ctx->rxon_cmd,
43 CMD_SYNC, sizeof(*send), send);
45 send->filter_flags = old_filter;
47 if (ret)
48 IWL_DEBUG_QUIET_RFKILL(priv,
49 "Error clearing ASSOC_MSK on BSS (%d)\n", ret);
51 return ret;
54 static int iwlagn_disable_pan(struct iwl_priv *priv,
55 struct iwl_rxon_context *ctx,
56 struct iwl_rxon_cmd *send)
58 struct iwl_notification_wait disable_wait;
59 __le32 old_filter = send->filter_flags;
60 u8 old_dev_type = send->dev_type;
61 int ret;
63 iwl_init_notification_wait(priv->shrd, &disable_wait,
64 REPLY_WIPAN_DEACTIVATION_COMPLETE,
65 NULL, NULL);
67 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
68 send->dev_type = RXON_DEV_TYPE_P2P;
69 ret = iwl_trans_send_cmd_pdu(trans(priv), ctx->rxon_cmd,
70 CMD_SYNC, sizeof(*send), send);
72 send->filter_flags = old_filter;
73 send->dev_type = old_dev_type;
75 if (ret) {
76 IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
77 iwl_remove_notification(priv->shrd, &disable_wait);
78 } else {
79 ret = iwl_wait_notification(priv->shrd, &disable_wait, HZ);
80 if (ret)
81 IWL_ERR(priv, "Timed out waiting for PAN disable\n");
84 return ret;
87 static int iwlagn_disconn_pan(struct iwl_priv *priv,
88 struct iwl_rxon_context *ctx,
89 struct iwl_rxon_cmd *send)
91 __le32 old_filter = send->filter_flags;
92 int ret;
94 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
95 ret = iwl_trans_send_cmd_pdu(trans(priv), ctx->rxon_cmd, CMD_SYNC,
96 sizeof(*send), send);
98 send->filter_flags = old_filter;
100 return ret;
103 static void iwlagn_update_qos(struct iwl_priv *priv,
104 struct iwl_rxon_context *ctx)
106 int ret;
108 if (!ctx->is_active)
109 return;
111 ctx->qos_data.def_qos_parm.qos_flags = 0;
113 if (ctx->qos_data.qos_active)
114 ctx->qos_data.def_qos_parm.qos_flags |=
115 QOS_PARAM_FLG_UPDATE_EDCA_MSK;
117 if (ctx->ht.enabled)
118 ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
120 IWL_DEBUG_INFO(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
121 ctx->qos_data.qos_active,
122 ctx->qos_data.def_qos_parm.qos_flags);
124 ret = iwl_trans_send_cmd_pdu(trans(priv), ctx->qos_cmd, CMD_SYNC,
125 sizeof(struct iwl_qosparam_cmd),
126 &ctx->qos_data.def_qos_parm);
127 if (ret)
128 IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n");
131 static int iwlagn_update_beacon(struct iwl_priv *priv,
132 struct ieee80211_vif *vif)
134 lockdep_assert_held(&priv->shrd->mutex);
136 dev_kfree_skb(priv->beacon_skb);
137 priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
138 if (!priv->beacon_skb)
139 return -ENOMEM;
140 return iwlagn_send_beacon_cmd(priv);
143 static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
144 struct iwl_rxon_context *ctx)
146 int ret = 0;
147 struct iwl_rxon_assoc_cmd rxon_assoc;
148 const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
149 const struct iwl_rxon_cmd *rxon2 = &ctx->active;
151 if ((rxon1->flags == rxon2->flags) &&
152 (rxon1->filter_flags == rxon2->filter_flags) &&
153 (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
154 (rxon1->ofdm_ht_single_stream_basic_rates ==
155 rxon2->ofdm_ht_single_stream_basic_rates) &&
156 (rxon1->ofdm_ht_dual_stream_basic_rates ==
157 rxon2->ofdm_ht_dual_stream_basic_rates) &&
158 (rxon1->ofdm_ht_triple_stream_basic_rates ==
159 rxon2->ofdm_ht_triple_stream_basic_rates) &&
160 (rxon1->acquisition_data == rxon2->acquisition_data) &&
161 (rxon1->rx_chain == rxon2->rx_chain) &&
162 (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
163 IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
164 return 0;
167 rxon_assoc.flags = ctx->staging.flags;
168 rxon_assoc.filter_flags = ctx->staging.filter_flags;
169 rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
170 rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
171 rxon_assoc.reserved1 = 0;
172 rxon_assoc.reserved2 = 0;
173 rxon_assoc.reserved3 = 0;
174 rxon_assoc.ofdm_ht_single_stream_basic_rates =
175 ctx->staging.ofdm_ht_single_stream_basic_rates;
176 rxon_assoc.ofdm_ht_dual_stream_basic_rates =
177 ctx->staging.ofdm_ht_dual_stream_basic_rates;
178 rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
179 rxon_assoc.ofdm_ht_triple_stream_basic_rates =
180 ctx->staging.ofdm_ht_triple_stream_basic_rates;
181 rxon_assoc.acquisition_data = ctx->staging.acquisition_data;
183 ret = iwl_trans_send_cmd_pdu(trans(priv), ctx->rxon_assoc_cmd,
184 CMD_ASYNC, sizeof(rxon_assoc), &rxon_assoc);
185 return ret;
188 static int iwlagn_rxon_disconn(struct iwl_priv *priv,
189 struct iwl_rxon_context *ctx)
191 int ret;
192 struct iwl_rxon_cmd *active = (void *)&ctx->active;
194 if (ctx->ctxid == IWL_RXON_CTX_BSS) {
195 ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
196 } else {
197 ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
198 if (ret)
199 return ret;
200 if (ctx->vif) {
201 ret = iwl_send_rxon_timing(priv, ctx);
202 if (ret) {
203 IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
204 return ret;
206 ret = iwlagn_disconn_pan(priv, ctx, &ctx->staging);
209 if (ret)
210 return ret;
213 * Un-assoc RXON clears the station table and WEP
214 * keys, so we have to restore those afterwards.
216 iwl_clear_ucode_stations(priv, ctx);
217 /* update -- might need P2P now */
218 iwl_update_bcast_station(priv, ctx);
219 iwl_restore_stations(priv, ctx);
220 ret = iwl_restore_default_wep_keys(priv, ctx);
221 if (ret) {
222 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
223 return ret;
226 memcpy(active, &ctx->staging, sizeof(*active));
227 return 0;
230 static int iwlagn_rxon_connect(struct iwl_priv *priv,
231 struct iwl_rxon_context *ctx)
233 int ret;
234 struct iwl_rxon_cmd *active = (void *)&ctx->active;
236 /* RXON timing must be before associated RXON */
237 if (ctx->ctxid == IWL_RXON_CTX_BSS) {
238 ret = iwl_send_rxon_timing(priv, ctx);
239 if (ret) {
240 IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
241 return ret;
244 /* QoS info may be cleared by previous un-assoc RXON */
245 iwlagn_update_qos(priv, ctx);
248 * We'll run into this code path when beaconing is
249 * enabled, but then we also need to send the beacon
250 * to the device.
252 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
253 ret = iwlagn_update_beacon(priv, ctx->vif);
254 if (ret) {
255 IWL_ERR(priv,
256 "Error sending required beacon (%d)!\n",
257 ret);
258 return ret;
262 priv->start_calib = 0;
264 * Apply the new configuration.
266 * Associated RXON doesn't clear the station table in uCode,
267 * so we don't need to restore stations etc. after this.
269 ret = iwl_trans_send_cmd_pdu(trans(priv), ctx->rxon_cmd, CMD_SYNC,
270 sizeof(struct iwl_rxon_cmd), &ctx->staging);
271 if (ret) {
272 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
273 return ret;
275 memcpy(active, &ctx->staging, sizeof(*active));
277 iwl_reprogram_ap_sta(priv, ctx);
279 /* IBSS beacon needs to be sent after setting assoc */
280 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
281 if (iwlagn_update_beacon(priv, ctx->vif))
282 IWL_ERR(priv, "Error sending IBSS beacon\n");
283 iwl_init_sensitivity(priv);
286 * If we issue a new RXON command which required a tune then
287 * we must send a new TXPOWER command or we won't be able to
288 * Tx any frames.
290 * It's expected we set power here if channel is changing.
292 ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
293 if (ret) {
294 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
295 return ret;
298 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
299 cfg(priv)->ht_params && cfg(priv)->ht_params->smps_mode)
300 ieee80211_request_smps(ctx->vif,
301 cfg(priv)->ht_params->smps_mode);
303 return 0;
306 int iwlagn_set_pan_params(struct iwl_priv *priv)
308 struct iwl_wipan_params_cmd cmd;
309 struct iwl_rxon_context *ctx_bss, *ctx_pan;
310 int slot0 = 300, slot1 = 0;
311 int ret;
313 if (priv->shrd->valid_contexts == BIT(IWL_RXON_CTX_BSS))
314 return 0;
316 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
318 lockdep_assert_held(&priv->shrd->mutex);
320 ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS];
321 ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN];
324 * If the PAN context is inactive, then we don't need
325 * to update the PAN parameters, the last thing we'll
326 * have done before it goes inactive is making the PAN
327 * parameters be WLAN-only.
329 if (!ctx_pan->is_active)
330 return 0;
332 memset(&cmd, 0, sizeof(cmd));
334 /* only 2 slots are currently allowed */
335 cmd.num_slots = 2;
337 cmd.slots[0].type = 0; /* BSS */
338 cmd.slots[1].type = 1; /* PAN */
340 if (priv->hw_roc_setup) {
341 /* both contexts must be used for this to happen */
342 slot1 = IWL_MIN_SLOT_TIME;
343 slot0 = 3000;
344 } else if (ctx_bss->vif && ctx_pan->vif) {
345 int bcnint = ctx_pan->beacon_int;
346 int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1;
348 /* should be set, but seems unused?? */
349 cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE);
351 if (ctx_pan->vif->type == NL80211_IFTYPE_AP &&
352 bcnint &&
353 bcnint != ctx_bss->beacon_int) {
354 IWL_ERR(priv,
355 "beacon intervals don't match (%d, %d)\n",
356 ctx_bss->beacon_int, ctx_pan->beacon_int);
357 } else
358 bcnint = max_t(int, bcnint,
359 ctx_bss->beacon_int);
360 if (!bcnint)
361 bcnint = DEFAULT_BEACON_INTERVAL;
362 slot0 = bcnint / 2;
363 slot1 = bcnint - slot0;
365 if (test_bit(STATUS_SCAN_HW, &priv->shrd->status) ||
366 (!ctx_bss->vif->bss_conf.idle &&
367 !ctx_bss->vif->bss_conf.assoc)) {
368 slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
369 slot1 = IWL_MIN_SLOT_TIME;
370 } else if (!ctx_pan->vif->bss_conf.idle &&
371 !ctx_pan->vif->bss_conf.assoc) {
372 slot1 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
373 slot0 = IWL_MIN_SLOT_TIME;
375 } else if (ctx_pan->vif) {
376 slot0 = 0;
377 slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) *
378 ctx_pan->beacon_int;
379 slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1);
381 if (test_bit(STATUS_SCAN_HW, &priv->shrd->status)) {
382 slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME;
383 slot1 = IWL_MIN_SLOT_TIME;
387 cmd.slots[0].width = cpu_to_le16(slot0);
388 cmd.slots[1].width = cpu_to_le16(slot1);
390 ret = iwl_trans_send_cmd_pdu(trans(priv), REPLY_WIPAN_PARAMS, CMD_SYNC,
391 sizeof(cmd), &cmd);
392 if (ret)
393 IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret);
395 return ret;
399 * iwlagn_commit_rxon - commit staging_rxon to hardware
401 * The RXON command in staging_rxon is committed to the hardware and
402 * the active_rxon structure is updated with the new data. This
403 * function correctly transitions out of the RXON_ASSOC_MSK state if
404 * a HW tune is required based on the RXON structure changes.
406 * The connect/disconnect flow should be as the following:
408 * 1. make sure send RXON command with association bit unset if not connect
409 * this should include the channel and the band for the candidate
410 * to be connected to
411 * 2. Add Station before RXON association with the AP
412 * 3. RXON_timing has to send before RXON for connection
413 * 4. full RXON command - associated bit set
414 * 5. use RXON_ASSOC command to update any flags changes
416 int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
418 /* cast away the const for active_rxon in this function */
419 struct iwl_rxon_cmd *active = (void *)&ctx->active;
420 bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
421 int ret;
423 lockdep_assert_held(&priv->shrd->mutex);
425 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
426 return -EINVAL;
428 if (!iwl_is_alive(priv->shrd))
429 return -EBUSY;
431 /* This function hardcodes a bunch of dual-mode assumptions */
432 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
434 if (!ctx->is_active)
435 return 0;
437 /* override BSSID if necessary due to preauth */
438 if (ctx->preauth_bssid)
439 memcpy(ctx->staging.bssid_addr, ctx->bssid, ETH_ALEN);
441 /* always get timestamp with Rx frame */
442 ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
445 * force CTS-to-self frames protection if RTS-CTS is not preferred
446 * one aggregation protection method
448 if (!(cfg(priv)->ht_params &&
449 cfg(priv)->ht_params->use_rts_for_aggregation))
450 ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
452 if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
453 !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
454 ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
455 else
456 ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
458 iwl_print_rx_config_cmd(priv, ctx->ctxid);
459 ret = iwl_check_rxon_cmd(priv, ctx);
460 if (ret) {
461 IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
462 return -EINVAL;
466 * receive commit_rxon request
467 * abort any previous channel switch if still in process
469 if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status) &&
470 (priv->switch_channel != ctx->staging.channel)) {
471 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
472 le16_to_cpu(priv->switch_channel));
473 iwl_chswitch_done(priv, false);
477 * If we don't need to send a full RXON, we can use
478 * iwl_rxon_assoc_cmd which is used to reconfigure filter
479 * and other flags for the current radio configuration.
481 if (!iwl_full_rxon_required(priv, ctx)) {
482 ret = iwlagn_send_rxon_assoc(priv, ctx);
483 if (ret) {
484 IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
485 return ret;
488 memcpy(active, &ctx->staging, sizeof(*active));
490 * We do not commit tx power settings while channel changing,
491 * do it now if after settings changed.
493 iwl_set_tx_power(priv, priv->tx_power_next, false);
495 /* make sure we are in the right PS state */
496 iwl_power_update_mode(priv, true);
498 return 0;
501 iwl_set_rxon_hwcrypto(priv, ctx, !iwlagn_mod_params.sw_crypto);
503 IWL_DEBUG_INFO(priv,
504 "Going to commit RXON\n"
505 " * with%s RXON_FILTER_ASSOC_MSK\n"
506 " * channel = %d\n"
507 " * bssid = %pM\n",
508 (new_assoc ? "" : "out"),
509 le16_to_cpu(ctx->staging.channel),
510 ctx->staging.bssid_addr);
513 * Always clear associated first, but with the correct config.
514 * This is required as for example station addition for the
515 * AP station must be done after the BSSID is set to correctly
516 * set up filters in the device.
518 ret = iwlagn_rxon_disconn(priv, ctx);
519 if (ret)
520 return ret;
522 ret = iwlagn_set_pan_params(priv);
523 if (ret)
524 return ret;
526 if (new_assoc)
527 return iwlagn_rxon_connect(priv, ctx);
529 return 0;
532 void iwlagn_config_ht40(struct ieee80211_conf *conf,
533 struct iwl_rxon_context *ctx)
535 if (conf_is_ht40_minus(conf)) {
536 ctx->ht.extension_chan_offset =
537 IEEE80211_HT_PARAM_CHA_SEC_BELOW;
538 ctx->ht.is_40mhz = true;
539 } else if (conf_is_ht40_plus(conf)) {
540 ctx->ht.extension_chan_offset =
541 IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
542 ctx->ht.is_40mhz = true;
543 } else {
544 ctx->ht.extension_chan_offset =
545 IEEE80211_HT_PARAM_CHA_SEC_NONE;
546 ctx->ht.is_40mhz = false;
550 int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
552 struct iwl_priv *priv = hw->priv;
553 struct iwl_rxon_context *ctx;
554 struct ieee80211_conf *conf = &hw->conf;
555 struct ieee80211_channel *channel = conf->channel;
556 const struct iwl_channel_info *ch_info;
557 int ret = 0;
559 IWL_DEBUG_MAC80211(priv, "enter: changed %#x", changed);
561 mutex_lock(&priv->shrd->mutex);
563 if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
564 goto out;
566 if (unlikely(test_bit(STATUS_SCANNING, &priv->shrd->status))) {
567 IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
568 goto out;
571 if (!iwl_is_ready(priv->shrd)) {
572 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
573 goto out;
576 if (changed & (IEEE80211_CONF_CHANGE_SMPS |
577 IEEE80211_CONF_CHANGE_CHANNEL)) {
578 /* mac80211 uses static for non-HT which is what we want */
579 priv->current_ht_config.smps = conf->smps_mode;
582 * Recalculate chain counts.
584 * If monitor mode is enabled then mac80211 will
585 * set up the SM PS mode to OFF if an HT channel is
586 * configured.
588 for_each_context(priv, ctx)
589 iwlagn_set_rxon_chain(priv, ctx);
592 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
593 unsigned long flags;
595 ch_info = iwl_get_channel_info(priv, channel->band,
596 channel->hw_value);
597 if (!is_channel_valid(ch_info)) {
598 IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
599 ret = -EINVAL;
600 goto out;
603 spin_lock_irqsave(&priv->shrd->lock, flags);
605 for_each_context(priv, ctx) {
606 /* Configure HT40 channels */
607 if (ctx->ht.enabled != conf_is_ht(conf))
608 ctx->ht.enabled = conf_is_ht(conf);
610 if (ctx->ht.enabled) {
611 /* if HT40 is used, it should not change
612 * after associated except channel switch */
613 if (!ctx->ht.is_40mhz ||
614 !iwl_is_associated_ctx(ctx))
615 iwlagn_config_ht40(conf, ctx);
616 } else
617 ctx->ht.is_40mhz = false;
620 * Default to no protection. Protection mode will
621 * later be set from BSS config in iwl_ht_conf
623 ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
625 /* if we are switching from ht to 2.4 clear flags
626 * from any ht related info since 2.4 does not
627 * support ht */
628 if (le16_to_cpu(ctx->staging.channel) !=
629 channel->hw_value)
630 ctx->staging.flags = 0;
632 iwl_set_rxon_channel(priv, channel, ctx);
633 iwl_set_rxon_ht(priv, &priv->current_ht_config);
635 iwl_set_flags_for_band(priv, ctx, channel->band,
636 ctx->vif);
639 spin_unlock_irqrestore(&priv->shrd->lock, flags);
641 iwl_update_bcast_stations(priv);
644 * The list of supported rates and rate mask can be different
645 * for each band; since the band may have changed, reset
646 * the rate mask to what mac80211 lists.
648 iwl_set_rate(priv);
651 if (changed & (IEEE80211_CONF_CHANGE_PS |
652 IEEE80211_CONF_CHANGE_IDLE)) {
653 ret = iwl_power_update_mode(priv, false);
654 if (ret)
655 IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
658 if (changed & IEEE80211_CONF_CHANGE_POWER) {
659 IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
660 priv->tx_power_user_lmt, conf->power_level);
662 iwl_set_tx_power(priv, conf->power_level, false);
665 for_each_context(priv, ctx) {
666 if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
667 continue;
668 iwlagn_commit_rxon(priv, ctx);
670 out:
671 mutex_unlock(&priv->shrd->mutex);
672 IWL_DEBUG_MAC80211(priv, "leave\n");
674 return ret;
677 static void iwlagn_check_needed_chains(struct iwl_priv *priv,
678 struct iwl_rxon_context *ctx,
679 struct ieee80211_bss_conf *bss_conf)
681 struct ieee80211_vif *vif = ctx->vif;
682 struct iwl_rxon_context *tmp;
683 struct ieee80211_sta *sta;
684 struct iwl_ht_config *ht_conf = &priv->current_ht_config;
685 struct ieee80211_sta_ht_cap *ht_cap;
686 bool need_multiple;
688 lockdep_assert_held(&priv->shrd->mutex);
690 switch (vif->type) {
691 case NL80211_IFTYPE_STATION:
692 rcu_read_lock();
693 sta = ieee80211_find_sta(vif, bss_conf->bssid);
694 if (!sta) {
696 * If at all, this can only happen through a race
697 * when the AP disconnects us while we're still
698 * setting up the connection, in that case mac80211
699 * will soon tell us about that.
701 need_multiple = false;
702 rcu_read_unlock();
703 break;
706 ht_cap = &sta->ht_cap;
708 need_multiple = true;
711 * If the peer advertises no support for receiving 2 and 3
712 * stream MCS rates, it can't be transmitting them either.
714 if (ht_cap->mcs.rx_mask[1] == 0 &&
715 ht_cap->mcs.rx_mask[2] == 0) {
716 need_multiple = false;
717 } else if (!(ht_cap->mcs.tx_params &
718 IEEE80211_HT_MCS_TX_DEFINED)) {
719 /* If it can't TX MCS at all ... */
720 need_multiple = false;
721 } else if (ht_cap->mcs.tx_params &
722 IEEE80211_HT_MCS_TX_RX_DIFF) {
723 int maxstreams;
726 * But if it can receive them, it might still not
727 * be able to transmit them, which is what we need
728 * to check here -- so check the number of streams
729 * it advertises for TX (if different from RX).
732 maxstreams = (ht_cap->mcs.tx_params &
733 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK);
734 maxstreams >>=
735 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
736 maxstreams += 1;
738 if (maxstreams <= 1)
739 need_multiple = false;
742 rcu_read_unlock();
743 break;
744 case NL80211_IFTYPE_ADHOC:
745 /* currently */
746 need_multiple = false;
747 break;
748 default:
749 /* only AP really */
750 need_multiple = true;
751 break;
754 ctx->ht_need_multiple_chains = need_multiple;
756 if (!need_multiple) {
757 /* check all contexts */
758 for_each_context(priv, tmp) {
759 if (!tmp->vif)
760 continue;
761 if (tmp->ht_need_multiple_chains) {
762 need_multiple = true;
763 break;
768 ht_conf->single_chain_sufficient = !need_multiple;
771 static void iwlagn_chain_noise_reset(struct iwl_priv *priv)
773 struct iwl_chain_noise_data *data = &priv->chain_noise_data;
774 int ret;
776 if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
777 iwl_is_any_associated(priv)) {
778 struct iwl_calib_chain_noise_reset_cmd cmd;
780 /* clear data for chain noise calibration algorithm */
781 data->chain_noise_a = 0;
782 data->chain_noise_b = 0;
783 data->chain_noise_c = 0;
784 data->chain_signal_a = 0;
785 data->chain_signal_b = 0;
786 data->chain_signal_c = 0;
787 data->beacon_count = 0;
789 memset(&cmd, 0, sizeof(cmd));
790 iwl_set_calib_hdr(&cmd.hdr,
791 priv->phy_calib_chain_noise_reset_cmd);
792 ret = iwl_trans_send_cmd_pdu(trans(priv),
793 REPLY_PHY_CALIBRATION_CMD,
794 CMD_SYNC, sizeof(cmd), &cmd);
795 if (ret)
796 IWL_ERR(priv,
797 "Could not send REPLY_PHY_CALIBRATION_CMD\n");
798 data->state = IWL_CHAIN_NOISE_ACCUMULATE;
799 IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
803 void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
804 struct ieee80211_vif *vif,
805 struct ieee80211_bss_conf *bss_conf,
806 u32 changes)
808 struct iwl_priv *priv = hw->priv;
809 struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
810 int ret;
811 bool force = false;
813 mutex_lock(&priv->shrd->mutex);
815 if (unlikely(!iwl_is_ready(priv->shrd))) {
816 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
817 mutex_unlock(&priv->shrd->mutex);
818 return;
821 if (unlikely(!ctx->vif)) {
822 IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
823 mutex_unlock(&priv->shrd->mutex);
824 return;
827 if (changes & BSS_CHANGED_BEACON_INT)
828 force = true;
830 if (changes & BSS_CHANGED_QOS) {
831 ctx->qos_data.qos_active = bss_conf->qos;
832 iwlagn_update_qos(priv, ctx);
835 ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
836 if (vif->bss_conf.use_short_preamble)
837 ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
838 else
839 ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
841 if (changes & BSS_CHANGED_ASSOC) {
842 if (bss_conf->assoc) {
843 priv->timestamp = bss_conf->timestamp;
844 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
845 } else {
847 * If we disassociate while there are pending
848 * frames, just wake up the queues and let the
849 * frames "escape" ... This shouldn't really
850 * be happening to start with, but we should
851 * not get stuck in this case either since it
852 * can happen if userspace gets confused.
854 if (ctx->last_tx_rejected) {
855 ctx->last_tx_rejected = false;
856 iwl_trans_wake_any_queue(trans(priv),
857 ctx->ctxid,
858 "Disassoc: flush queue");
860 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
862 if (ctx->ctxid == IWL_RXON_CTX_BSS)
863 priv->have_rekey_data = false;
866 iwlagn_bt_coex_rssi_monitor(priv);
869 if (ctx->ht.enabled) {
870 ctx->ht.protection = bss_conf->ht_operation_mode &
871 IEEE80211_HT_OP_MODE_PROTECTION;
872 ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
873 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
874 iwlagn_check_needed_chains(priv, ctx, bss_conf);
875 iwl_set_rxon_ht(priv, &priv->current_ht_config);
878 iwlagn_set_rxon_chain(priv, ctx);
880 if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
881 ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
882 else
883 ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
885 if (bss_conf->use_cts_prot)
886 ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
887 else
888 ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
890 memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
892 if (vif->type == NL80211_IFTYPE_AP ||
893 vif->type == NL80211_IFTYPE_ADHOC) {
894 if (vif->bss_conf.enable_beacon) {
895 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
896 priv->beacon_ctx = ctx;
897 } else {
898 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
899 priv->beacon_ctx = NULL;
903 if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
904 iwlagn_commit_rxon(priv, ctx);
906 if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
908 * The chain noise calibration will enable PM upon
909 * completion. If calibration has already been run
910 * then we need to enable power management here.
912 if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
913 iwl_power_update_mode(priv, false);
915 /* Enable RX differential gain and sensitivity calibrations */
916 if (!priv->disable_chain_noise_cal)
917 iwlagn_chain_noise_reset(priv);
918 priv->start_calib = 1;
919 WARN_ON(ctx->preauth_bssid);
922 if (changes & BSS_CHANGED_IBSS) {
923 ret = iwlagn_manage_ibss_station(priv, vif,
924 bss_conf->ibss_joined);
925 if (ret)
926 IWL_ERR(priv, "failed to %s IBSS station %pM\n",
927 bss_conf->ibss_joined ? "add" : "remove",
928 bss_conf->bssid);
931 if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
932 priv->beacon_ctx) {
933 if (iwlagn_update_beacon(priv, vif))
934 IWL_ERR(priv, "Error sending IBSS beacon\n");
937 mutex_unlock(&priv->shrd->mutex);
940 void iwlagn_post_scan(struct iwl_priv *priv)
942 struct iwl_rxon_context *ctx;
945 * We do not commit power settings while scan is pending,
946 * do it now if the settings changed.
948 iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false);
949 iwl_set_tx_power(priv, priv->tx_power_next, false);
952 * Since setting the RXON may have been deferred while
953 * performing the scan, fire one off if needed
955 for_each_context(priv, ctx)
956 if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
957 iwlagn_commit_rxon(priv, ctx);
959 iwlagn_set_pan_params(priv);