spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / drivers / net / wireless / libertas / defs.h
blobab966f08024a0013194c8eaf82e472d866f3492e
1 /*
2 * This header file contains global constant/enum definitions,
3 * global variable declaration.
4 */
5 #ifndef _LBS_DEFS_H_
6 #define _LBS_DEFS_H_
8 #include <linux/spinlock.h>
10 #ifdef CONFIG_LIBERTAS_DEBUG
11 #define DEBUG
12 #define PROC_DEBUG
13 #endif
15 #ifndef DRV_NAME
16 #define DRV_NAME "libertas"
17 #endif
20 #define LBS_DEB_ENTER 0x00000001
21 #define LBS_DEB_LEAVE 0x00000002
22 #define LBS_DEB_MAIN 0x00000004
23 #define LBS_DEB_NET 0x00000008
24 #define LBS_DEB_MESH 0x00000010
25 #define LBS_DEB_WEXT 0x00000020
26 #define LBS_DEB_IOCTL 0x00000040
27 #define LBS_DEB_SCAN 0x00000080
28 #define LBS_DEB_ASSOC 0x00000100
29 #define LBS_DEB_JOIN 0x00000200
30 #define LBS_DEB_11D 0x00000400
31 #define LBS_DEB_DEBUGFS 0x00000800
32 #define LBS_DEB_ETHTOOL 0x00001000
33 #define LBS_DEB_HOST 0x00002000
34 #define LBS_DEB_CMD 0x00004000
35 #define LBS_DEB_RX 0x00008000
36 #define LBS_DEB_TX 0x00010000
37 #define LBS_DEB_USB 0x00020000
38 #define LBS_DEB_CS 0x00040000
39 #define LBS_DEB_FW 0x00080000
40 #define LBS_DEB_THREAD 0x00100000
41 #define LBS_DEB_HEX 0x00200000
42 #define LBS_DEB_SDIO 0x00400000
43 #define LBS_DEB_SYSFS 0x00800000
44 #define LBS_DEB_SPI 0x01000000
45 #define LBS_DEB_CFG80211 0x02000000
47 extern unsigned int lbs_debug;
49 #ifdef DEBUG
50 #define LBS_DEB_LL(grp, grpnam, fmt, args...) \
51 do { if ((lbs_debug & (grp)) == (grp)) \
52 printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \
53 in_interrupt() ? " (INT)" : "", ## args); } while (0)
54 #else
55 #define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0)
56 #endif
58 #define lbs_deb_enter(grp) \
59 LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s()\n", __func__);
60 #define lbs_deb_enter_args(grp, fmt, args...) \
61 LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args);
62 #define lbs_deb_leave(grp) \
63 LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s()\n", __func__);
64 #define lbs_deb_leave_args(grp, fmt, args...) \
65 LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s(), " fmt "\n", \
66 __func__, ##args);
67 #define lbs_deb_main(fmt, args...) LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args)
68 #define lbs_deb_net(fmt, args...) LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args)
69 #define lbs_deb_mesh(fmt, args...) LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args)
70 #define lbs_deb_wext(fmt, args...) LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args)
71 #define lbs_deb_ioctl(fmt, args...) LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args)
72 #define lbs_deb_scan(fmt, args...) LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args)
73 #define lbs_deb_assoc(fmt, args...) LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args)
74 #define lbs_deb_join(fmt, args...) LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args)
75 #define lbs_deb_11d(fmt, args...) LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args)
76 #define lbs_deb_debugfs(fmt, args...) LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args)
77 #define lbs_deb_ethtool(fmt, args...) LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args)
78 #define lbs_deb_host(fmt, args...) LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args)
79 #define lbs_deb_cmd(fmt, args...) LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args)
80 #define lbs_deb_rx(fmt, args...) LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args)
81 #define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
82 #define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
83 #define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
84 #define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
85 #define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
86 #define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
87 #define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
88 #define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
89 #define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
90 #define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
92 #ifdef DEBUG
93 static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
95 int i = 0;
97 if (len &&
98 (lbs_debug & LBS_DEB_HEX) &&
99 (lbs_debug & grp))
101 for (i = 1; i <= len; i++) {
102 if ((i & 0xf) == 1) {
103 if (i != 1)
104 printk("\n");
105 printk(DRV_NAME " %s: ", prompt);
107 printk("%02x ", (u8) * buf);
108 buf++;
110 printk("\n");
113 #else
114 #define lbs_deb_hex(grp,prompt,buf,len) do {} while (0)
115 #endif
119 /* Buffer Constants */
121 /* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
122 * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
123 * driver has more local TxPDs. Each TxPD on the host memory is associated
124 * with a Tx control node. The driver maintains 8 RxPD descriptors for
125 * station firmware to store Rx packet information.
127 * Current version of MAC has a 32x6 multicast address buffer.
129 * 802.11b can have up to 14 channels, the driver keeps the
130 * BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
133 #define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
134 #define LBS_NUM_CMD_BUFFERS 10
135 #define LBS_CMD_BUFFER_SIZE (2 * 1024)
136 #define MRVDRV_MAX_CHANNEL_SIZE 14
137 #define MRVDRV_ASSOCIATION_TIME_OUT 255
138 #define MRVDRV_SNAP_HEADER_LEN 8
140 #define LBS_UPLD_SIZE 2312
141 #define DEV_NAME_LEN 32
143 /* Wake criteria for HOST_SLEEP_CFG command */
144 #define EHS_WAKE_ON_BROADCAST_DATA 0x0001
145 #define EHS_WAKE_ON_UNICAST_DATA 0x0002
146 #define EHS_WAKE_ON_MAC_EVENT 0x0004
147 #define EHS_WAKE_ON_MULTICAST_DATA 0x0008
148 #define EHS_REMOVE_WAKEUP 0xFFFFFFFF
149 /* Wake rules for Host_Sleep_CFG command */
150 #define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00
151 #define WOL_RULE_NET_TYPE_MESH 0x10
152 #define WOL_RULE_ADDR_TYPE_BCAST 0x01
153 #define WOL_RULE_ADDR_TYPE_MCAST 0x08
154 #define WOL_RULE_ADDR_TYPE_UCAST 0x02
155 #define WOL_RULE_OP_AND 0x01
156 #define WOL_RULE_OP_OR 0x02
157 #define WOL_RULE_OP_INVALID 0xFF
158 #define WOL_RESULT_VALID_CMD 0
159 #define WOL_RESULT_NOSPC_ERR 1
160 #define WOL_RESULT_EEXIST_ERR 2
162 /* Misc constants */
163 /* This section defines 802.11 specific contants */
165 #define MRVDRV_MAX_BSS_DESCRIPTS 16
166 #define MRVDRV_MAX_REGION_CODE 6
168 #define MRVDRV_DEFAULT_LISTEN_INTERVAL 10
170 #define MRVDRV_CHANNELS_PER_SCAN 4
171 #define MRVDRV_MAX_CHANNELS_PER_SCAN 14
173 #define MRVDRV_MIN_BEACON_INTERVAL 20
174 #define MRVDRV_MAX_BEACON_INTERVAL 1000
175 #define MRVDRV_BEACON_INTERVAL 100
177 #define MARVELL_MESH_IE_LENGTH 9
180 * Values used to populate the struct mrvl_mesh_ie. The only time you need this
181 * is when enabling the mesh using CMD_MESH_CONFIG.
183 #define MARVELL_MESH_IE_TYPE 4
184 #define MARVELL_MESH_IE_SUBTYPE 0
185 #define MARVELL_MESH_IE_VERSION 0
186 #define MARVELL_MESH_PROTO_ID_HWMP 0
187 #define MARVELL_MESH_METRIC_ID 0
188 #define MARVELL_MESH_CAPABILITY 0
190 /* INT status Bit Definition */
191 #define MRVDRV_TX_DNLD_RDY 0x0001
192 #define MRVDRV_RX_UPLD_RDY 0x0002
193 #define MRVDRV_CMD_DNLD_RDY 0x0004
194 #define MRVDRV_CMD_UPLD_RDY 0x0008
195 #define MRVDRV_CARDEVENT 0x0010
197 /* Automatic TX control default levels */
198 #define POW_ADAPT_DEFAULT_P0 13
199 #define POW_ADAPT_DEFAULT_P1 15
200 #define POW_ADAPT_DEFAULT_P2 18
201 #define TPC_DEFAULT_P0 5
202 #define TPC_DEFAULT_P1 10
203 #define TPC_DEFAULT_P2 13
205 /* TxPD status */
208 * Station firmware use TxPD status field to report final Tx transmit
209 * result, Bit masks are used to present combined situations.
212 #define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
213 #define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
215 /* Tx mesh flag */
217 * Currently we are using normal WDS flag as mesh flag.
218 * TODO: change to proper mesh flag when MAC understands it.
220 #define TxPD_CONTROL_WDS_FRAME (1<<17)
221 #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
223 /* Mesh interface ID */
224 #define MESH_IFACE_ID 0x0001
225 /* Mesh id should be in bits 14-13-12 */
226 #define MESH_IFACE_BIT_OFFSET 0x000c
227 /* Mesh enable bit in FW capability */
228 #define MESH_CAPINFO_ENABLE_MASK (1<<16)
230 /* FW definition from Marvell v4 */
231 #define MRVL_FW_V4 (0x04)
232 /* FW definition from Marvell v5 */
233 #define MRVL_FW_V5 (0x05)
234 /* FW definition from Marvell v10 */
235 #define MRVL_FW_V10 (0x0a)
236 /* FW major revision definition */
237 #define MRVL_FW_MAJOR_REV(x) ((x)>>24)
239 /* RxPD status */
241 #define MRVDRV_RXPD_STATUS_OK 0x0001
243 /* RxPD status - Received packet types */
244 /* Rx mesh flag */
246 * Currently we are using normal WDS flag as mesh flag.
247 * TODO: change to proper mesh flag when MAC understands it.
249 #define RxPD_CONTROL_WDS_FRAME (0x40)
250 #define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
252 /* RSSI-related defines */
254 * RSSI constants are used to implement 802.11 RSSI threshold
255 * indication. if the Rx packet signal got too weak for 5 consecutive
256 * times, miniport driver (driver) will report this event to wrapper
259 #define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
261 /* RTS/FRAG related defines */
262 #define MRVDRV_RTS_MIN_VALUE 0
263 #define MRVDRV_RTS_MAX_VALUE 2347
264 #define MRVDRV_FRAG_MIN_VALUE 256
265 #define MRVDRV_FRAG_MAX_VALUE 2346
267 /* This is for firmware specific length */
268 #define EXTRA_LEN 36
270 #define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
271 (ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
273 #define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
274 (ETH_FRAME_LEN + sizeof(struct rxpd) \
275 + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
277 #define CMD_F_HOSTCMD (1 << 0)
278 #define FW_CAPINFO_WPA (1 << 0)
279 #define FW_CAPINFO_PS (1 << 1)
280 #define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13)
281 #define FW_CAPINFO_BOOT2_UPGRADE (1<<14)
282 #define FW_CAPINFO_PERSISTENT_CONFIG (1<<15)
284 #define KEY_LEN_WPA_AES 16
285 #define KEY_LEN_WPA_TKIP 32
286 #define KEY_LEN_WEP_104 13
287 #define KEY_LEN_WEP_40 5
289 #define RF_ANTENNA_1 0x1
290 #define RF_ANTENNA_2 0x2
291 #define RF_ANTENNA_AUTO 0xFFFF
293 #define BAND_B (0x01)
294 #define BAND_G (0x02)
295 #define ALL_802_11_BANDS (BAND_B | BAND_G)
297 #define MAX_RATES 14
299 #define MAX_LEDS 8
301 /* Global Variable Declaration */
302 extern const char lbs_driver_version[];
303 extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
306 /* ENUM definition */
307 /* SNRNF_TYPE */
308 enum SNRNF_TYPE {
309 TYPE_BEACON = 0,
310 TYPE_RXPD,
311 MAX_TYPE_B
314 /* SNRNF_DATA */
315 enum SNRNF_DATA {
316 TYPE_NOAVG = 0,
317 TYPE_AVG,
318 MAX_TYPE_AVG
321 /* LBS_802_11_POWER_MODE */
322 enum LBS_802_11_POWER_MODE {
323 LBS802_11POWERMODECAM,
324 LBS802_11POWERMODEMAX_PSP,
325 LBS802_11POWERMODEFAST_PSP,
326 /* not a real mode, defined as an upper bound */
327 LBS802_11POWEMODEMAX
330 /* PS_STATE */
331 enum PS_STATE {
332 PS_STATE_FULL_POWER,
333 PS_STATE_AWAKE,
334 PS_STATE_PRE_SLEEP,
335 PS_STATE_SLEEP
338 /* DNLD_STATE */
339 enum DNLD_STATE {
340 DNLD_RES_RECEIVED,
341 DNLD_DATA_SENT,
342 DNLD_CMD_SENT,
343 DNLD_BOOTCMD_SENT,
346 /* LBS_MEDIA_STATE */
347 enum LBS_MEDIA_STATE {
348 LBS_CONNECTED,
349 LBS_DISCONNECTED
352 /* LBS_802_11_PRIVACY_FILTER */
353 enum LBS_802_11_PRIVACY_FILTER {
354 LBS802_11PRIVFILTERACCEPTALL,
355 LBS802_11PRIVFILTER8021XWEP
358 /* mv_ms_type */
359 enum mv_ms_type {
360 MVMS_DAT = 0,
361 MVMS_CMD = 1,
362 MVMS_TXDONE = 2,
363 MVMS_EVENT
366 /* KEY_TYPE_ID */
367 enum KEY_TYPE_ID {
368 KEY_TYPE_ID_WEP = 0,
369 KEY_TYPE_ID_TKIP,
370 KEY_TYPE_ID_AES
373 /* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
374 enum KEY_INFO_WPA {
375 KEY_INFO_WPA_MCAST = 0x01,
376 KEY_INFO_WPA_UNICAST = 0x02,
377 KEY_INFO_WPA_ENABLED = 0x04
380 /* Default values for fwt commands. */
381 #define FWT_DEFAULT_METRIC 0
382 #define FWT_DEFAULT_DIR 1
383 /* Default Rate, 11Mbps */
384 #define FWT_DEFAULT_RATE 3
385 #define FWT_DEFAULT_SSN 0xffffffff
386 #define FWT_DEFAULT_DSN 0
387 #define FWT_DEFAULT_HOPCOUNT 0
388 #define FWT_DEFAULT_TTL 0
389 #define FWT_DEFAULT_EXPIRATION 0
390 #define FWT_DEFAULT_SLEEPMODE 0
391 #define FWT_DEFAULT_SNR 0
393 #endif