spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / drivers / net / wireless / libertas / host.h
blob2e2dbfa2ee500f8072f8696df7f8d6711d58fbd9
1 /*
2 * This file function prototypes, data structure
3 * and definitions for all the host/station commands
4 */
6 #ifndef _LBS_HOST_H_
7 #define _LBS_HOST_H_
9 #include "types.h"
10 #include "defs.h"
12 #define DEFAULT_AD_HOC_CHANNEL 6
14 #define CMD_OPTION_WAITFORRSP 0x0002
16 /* Host command IDs */
19 * Return command are almost always the same as the host command, but with
20 * bit 15 set high. There are a few exceptions, though...
22 #define CMD_RET(cmd) (0x8000 | cmd)
24 /* Return command convention exceptions: */
25 #define CMD_RET_802_11_ASSOCIATE 0x8012
27 /* Command codes */
28 #define CMD_GET_HW_SPEC 0x0003
29 #define CMD_EEPROM_UPDATE 0x0004
30 #define CMD_802_11_RESET 0x0005
31 #define CMD_802_11_SCAN 0x0006
32 #define CMD_802_11_GET_LOG 0x000b
33 #define CMD_MAC_MULTICAST_ADR 0x0010
34 #define CMD_802_11_AUTHENTICATE 0x0011
35 #define CMD_802_11_EEPROM_ACCESS 0x0059
36 #define CMD_802_11_ASSOCIATE 0x0050
37 #define CMD_802_11_SET_WEP 0x0013
38 #define CMD_802_11_GET_STAT 0x0014
39 #define CMD_802_3_GET_STAT 0x0015
40 #define CMD_802_11_SNMP_MIB 0x0016
41 #define CMD_MAC_REG_MAP 0x0017
42 #define CMD_BBP_REG_MAP 0x0018
43 #define CMD_MAC_REG_ACCESS 0x0019
44 #define CMD_BBP_REG_ACCESS 0x001a
45 #define CMD_RF_REG_ACCESS 0x001b
46 #define CMD_802_11_RADIO_CONTROL 0x001c
47 #define CMD_802_11_RF_CHANNEL 0x001d
48 #define CMD_802_11_RF_TX_POWER 0x001e
49 #define CMD_802_11_RSSI 0x001f
50 #define CMD_802_11_RF_ANTENNA 0x0020
51 #define CMD_802_11_PS_MODE 0x0021
52 #define CMD_802_11_DATA_RATE 0x0022
53 #define CMD_RF_REG_MAP 0x0023
54 #define CMD_802_11_DEAUTHENTICATE 0x0024
55 #define CMD_802_11_REASSOCIATE 0x0025
56 #define CMD_MAC_CONTROL 0x0028
57 #define CMD_802_11_AD_HOC_START 0x002b
58 #define CMD_802_11_AD_HOC_JOIN 0x002c
59 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
60 #define CMD_802_11_ENABLE_RSN 0x002f
61 #define CMD_802_11_SET_AFC 0x003c
62 #define CMD_802_11_GET_AFC 0x003d
63 #define CMD_802_11_DEEP_SLEEP 0x003e
64 #define CMD_802_11_AD_HOC_STOP 0x0040
65 #define CMD_802_11_HOST_SLEEP_CFG 0x0043
66 #define CMD_802_11_WAKEUP_CONFIRM 0x0044
67 #define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
68 #define CMD_802_11_BEACON_STOP 0x0049
69 #define CMD_802_11_MAC_ADDRESS 0x004d
70 #define CMD_802_11_LED_GPIO_CTRL 0x004e
71 #define CMD_802_11_EEPROM_ACCESS 0x0059
72 #define CMD_802_11_BAND_CONFIG 0x0058
73 #define CMD_GSPI_BUS_CONFIG 0x005a
74 #define CMD_802_11D_DOMAIN_INFO 0x005b
75 #define CMD_802_11_KEY_MATERIAL 0x005e
76 #define CMD_802_11_SLEEP_PARAMS 0x0066
77 #define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
78 #define CMD_802_11_SLEEP_PERIOD 0x0068
79 #define CMD_802_11_TPC_CFG 0x0072
80 #define CMD_802_11_PA_CFG 0x0073
81 #define CMD_802_11_FW_WAKE_METHOD 0x0074
82 #define CMD_802_11_SUBSCRIBE_EVENT 0x0075
83 #define CMD_802_11_RATE_ADAPT_RATESET 0x0076
84 #define CMD_802_11_TX_RATE_QUERY 0x007f
85 #define CMD_GET_TSF 0x0080
86 #define CMD_BT_ACCESS 0x0087
87 #define CMD_FWT_ACCESS 0x0095
88 #define CMD_802_11_MONITOR_MODE 0x0098
89 #define CMD_MESH_ACCESS 0x009b
90 #define CMD_MESH_CONFIG_OLD 0x00a3
91 #define CMD_MESH_CONFIG 0x00ac
92 #define CMD_SET_BOOT2_VER 0x00a5
93 #define CMD_FUNC_INIT 0x00a9
94 #define CMD_FUNC_SHUTDOWN 0x00aa
95 #define CMD_802_11_BEACON_CTRL 0x00b0
97 /* For the IEEE Power Save */
98 #define PS_MODE_ACTION_ENTER_PS 0x0030
99 #define PS_MODE_ACTION_EXIT_PS 0x0031
100 #define PS_MODE_ACTION_SLEEP_CONFIRMED 0x0034
102 #define CMD_ENABLE_RSN 0x0001
103 #define CMD_DISABLE_RSN 0x0000
105 #define CMD_ACT_GET 0x0000
106 #define CMD_ACT_SET 0x0001
108 /* Define action or option for CMD_802_11_SET_WEP */
109 #define CMD_ACT_ADD 0x0002
110 #define CMD_ACT_REMOVE 0x0004
112 #define CMD_TYPE_WEP_40_BIT 0x01
113 #define CMD_TYPE_WEP_104_BIT 0x02
115 #define CMD_NUM_OF_WEP_KEYS 4
117 #define CMD_WEP_KEY_INDEX_MASK 0x3fff
119 /* Define action or option for CMD_802_11_SCAN */
120 #define CMD_BSS_TYPE_BSS 0x0001
121 #define CMD_BSS_TYPE_IBSS 0x0002
122 #define CMD_BSS_TYPE_ANY 0x0003
124 /* Define action or option for CMD_802_11_SCAN */
125 #define CMD_SCAN_TYPE_ACTIVE 0x0000
126 #define CMD_SCAN_TYPE_PASSIVE 0x0001
128 #define CMD_SCAN_RADIO_TYPE_BG 0
130 #define CMD_SCAN_PROBE_DELAY_TIME 0
132 /* Define action or option for CMD_MAC_CONTROL */
133 #define CMD_ACT_MAC_RX_ON 0x0001
134 #define CMD_ACT_MAC_TX_ON 0x0002
135 #define CMD_ACT_MAC_LOOPBACK_ON 0x0004
136 #define CMD_ACT_MAC_WEP_ENABLE 0x0008
137 #define CMD_ACT_MAC_INT_ENABLE 0x0010
138 #define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
139 #define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
140 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
141 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
142 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
144 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
145 #define CMD_SUBSCRIBE_RSSI_LOW 0x0001
146 #define CMD_SUBSCRIBE_SNR_LOW 0x0002
147 #define CMD_SUBSCRIBE_FAILCOUNT 0x0004
148 #define CMD_SUBSCRIBE_BCNMISS 0x0008
149 #define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
150 #define CMD_SUBSCRIBE_SNR_HIGH 0x0020
152 #define RADIO_PREAMBLE_LONG 0x00
153 #define RADIO_PREAMBLE_SHORT 0x02
154 #define RADIO_PREAMBLE_AUTO 0x04
156 /* Define action or option for CMD_802_11_RF_CHANNEL */
157 #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
158 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
160 /* Define action or option for CMD_802_11_DATA_RATE */
161 #define CMD_ACT_SET_TX_AUTO 0x0000
162 #define CMD_ACT_SET_TX_FIX_RATE 0x0001
163 #define CMD_ACT_GET_TX_RATE 0x0002
165 /* Options for CMD_802_11_FW_WAKE_METHOD */
166 #define CMD_WAKE_METHOD_UNCHANGED 0x0000
167 #define CMD_WAKE_METHOD_COMMAND_INT 0x0001
168 #define CMD_WAKE_METHOD_GPIO 0x0002
170 /* Object IDs for CMD_802_11_SNMP_MIB */
171 #define SNMP_MIB_OID_BSS_TYPE 0x0000
172 #define SNMP_MIB_OID_OP_RATE_SET 0x0001
173 #define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
174 #define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
175 #define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
176 #define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
177 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
178 #define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
179 #define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
180 #define SNMP_MIB_OID_11D_ENABLE 0x0009
181 #define SNMP_MIB_OID_11H_ENABLE 0x000A
183 /* Define action or option for CMD_BT_ACCESS */
184 enum cmd_bt_access_opts {
185 /* The bt commands start at 5 instead of 1 because the old dft commands
186 * are mapped to 1-4. These old commands are no longer maintained and
187 * should not be called.
189 CMD_ACT_BT_ACCESS_ADD = 5,
190 CMD_ACT_BT_ACCESS_DEL,
191 CMD_ACT_BT_ACCESS_LIST,
192 CMD_ACT_BT_ACCESS_RESET,
193 CMD_ACT_BT_ACCESS_SET_INVERT,
194 CMD_ACT_BT_ACCESS_GET_INVERT
197 /* Define action or option for CMD_FWT_ACCESS */
198 enum cmd_fwt_access_opts {
199 CMD_ACT_FWT_ACCESS_ADD = 1,
200 CMD_ACT_FWT_ACCESS_DEL,
201 CMD_ACT_FWT_ACCESS_LOOKUP,
202 CMD_ACT_FWT_ACCESS_LIST,
203 CMD_ACT_FWT_ACCESS_LIST_ROUTE,
204 CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
205 CMD_ACT_FWT_ACCESS_RESET,
206 CMD_ACT_FWT_ACCESS_CLEANUP,
207 CMD_ACT_FWT_ACCESS_TIME,
210 /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
211 enum cmd_wol_cfg_opts {
212 CMD_ACT_ACTION_NONE = 0,
213 CMD_ACT_SET_WOL_RULE,
214 CMD_ACT_GET_WOL_RULE,
215 CMD_ACT_RESET_WOL_RULE,
218 /* Define action or option for CMD_MESH_ACCESS */
219 enum cmd_mesh_access_opts {
220 CMD_ACT_MESH_GET_TTL = 1,
221 CMD_ACT_MESH_SET_TTL,
222 CMD_ACT_MESH_GET_STATS,
223 CMD_ACT_MESH_GET_ANYCAST,
224 CMD_ACT_MESH_SET_ANYCAST,
225 CMD_ACT_MESH_SET_LINK_COSTS,
226 CMD_ACT_MESH_GET_LINK_COSTS,
227 CMD_ACT_MESH_SET_BCAST_RATE,
228 CMD_ACT_MESH_GET_BCAST_RATE,
229 CMD_ACT_MESH_SET_RREQ_DELAY,
230 CMD_ACT_MESH_GET_RREQ_DELAY,
231 CMD_ACT_MESH_SET_ROUTE_EXP,
232 CMD_ACT_MESH_GET_ROUTE_EXP,
233 CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
234 CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
235 CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
238 /* Define actions and types for CMD_MESH_CONFIG */
239 enum cmd_mesh_config_actions {
240 CMD_ACT_MESH_CONFIG_STOP = 0,
241 CMD_ACT_MESH_CONFIG_START,
242 CMD_ACT_MESH_CONFIG_SET,
243 CMD_ACT_MESH_CONFIG_GET,
246 enum cmd_mesh_config_types {
247 CMD_TYPE_MESH_SET_BOOTFLAG = 1,
248 CMD_TYPE_MESH_SET_BOOTTIME,
249 CMD_TYPE_MESH_SET_DEF_CHANNEL,
250 CMD_TYPE_MESH_SET_MESH_IE,
251 CMD_TYPE_MESH_GET_DEFAULTS,
252 CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
255 /* Card Event definition */
256 #define MACREG_INT_CODE_TX_PPA_FREE 0
257 #define MACREG_INT_CODE_TX_DMA_DONE 1
258 #define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
259 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
260 #define MACREG_INT_CODE_LINK_SENSED 4
261 #define MACREG_INT_CODE_CMD_FINISHED 5
262 #define MACREG_INT_CODE_MIB_CHANGED 6
263 #define MACREG_INT_CODE_INIT_DONE 7
264 #define MACREG_INT_CODE_DEAUTHENTICATED 8
265 #define MACREG_INT_CODE_DISASSOCIATED 9
266 #define MACREG_INT_CODE_PS_AWAKE 10
267 #define MACREG_INT_CODE_PS_SLEEP 11
268 #define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
269 #define MACREG_INT_CODE_MIC_ERR_UNICAST 14
270 #define MACREG_INT_CODE_WM_AWAKE 15
271 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
272 #define MACREG_INT_CODE_ADHOC_BCN_LOST 17
273 #define MACREG_INT_CODE_HOST_AWAKE 18
274 #define MACREG_INT_CODE_STOP_TX 19
275 #define MACREG_INT_CODE_START_TX 20
276 #define MACREG_INT_CODE_CHANNEL_SWITCH 21
277 #define MACREG_INT_CODE_MEASUREMENT_RDY 22
278 #define MACREG_INT_CODE_WMM_CHANGE 23
279 #define MACREG_INT_CODE_BG_SCAN_REPORT 24
280 #define MACREG_INT_CODE_RSSI_LOW 25
281 #define MACREG_INT_CODE_SNR_LOW 26
282 #define MACREG_INT_CODE_MAX_FAIL 27
283 #define MACREG_INT_CODE_RSSI_HIGH 28
284 #define MACREG_INT_CODE_SNR_HIGH 29
285 #define MACREG_INT_CODE_MESH_AUTO_STARTED 35
286 #define MACREG_INT_CODE_FIRMWARE_READY 48
289 /* 802.11-related definitions */
291 /* TxPD descriptor */
292 struct txpd {
293 /* union to cope up with later FW revisions */
294 union {
295 /* Current Tx packet status */
296 __le32 tx_status;
297 struct {
298 /* BSS type: client, AP, etc. */
299 u8 bss_type;
300 /* BSS number */
301 u8 bss_num;
302 /* Reserved */
303 __le16 reserved;
304 } bss;
305 } u;
306 /* Tx control */
307 __le32 tx_control;
308 __le32 tx_packet_location;
309 /* Tx packet length */
310 __le16 tx_packet_length;
311 /* First 2 byte of destination MAC address */
312 u8 tx_dest_addr_high[2];
313 /* Last 4 byte of destination MAC address */
314 u8 tx_dest_addr_low[4];
315 /* Pkt Priority */
316 u8 priority;
317 /* Pkt Trasnit Power control */
318 u8 powermgmt;
319 /* Amount of time the packet has been queued (units = 2ms) */
320 u8 pktdelay_2ms;
321 /* reserved */
322 u8 reserved1;
323 } __packed;
325 /* RxPD Descriptor */
326 struct rxpd {
327 /* union to cope up with later FW revisions */
328 union {
329 /* Current Rx packet status */
330 __le16 status;
331 struct {
332 /* BSS type: client, AP, etc. */
333 u8 bss_type;
334 /* BSS number */
335 u8 bss_num;
336 } __packed bss;
337 } __packed u;
339 /* SNR */
340 u8 snr;
342 /* Tx control */
343 u8 rx_control;
345 /* Pkt length */
346 __le16 pkt_len;
348 /* Noise Floor */
349 u8 nf;
351 /* Rx Packet Rate */
352 u8 rx_rate;
354 /* Pkt addr */
355 __le32 pkt_ptr;
357 /* Next Rx RxPD addr */
358 __le32 next_rxpd_ptr;
360 /* Pkt Priority */
361 u8 priority;
362 u8 reserved[3];
363 } __packed;
365 struct cmd_header {
366 __le16 command;
367 __le16 size;
368 __le16 seqnum;
369 __le16 result;
370 } __packed;
372 /* Generic structure to hold all key types. */
373 struct enc_key {
374 u16 len;
375 u16 flags; /* KEY_INFO_* from defs.h */
376 u16 type; /* KEY_TYPE_* from defs.h */
377 u8 key[32];
380 /* lbs_offset_value */
381 struct lbs_offset_value {
382 u32 offset;
383 u32 value;
384 } __packed;
386 #define MAX_11D_TRIPLETS 83
388 struct mrvl_ie_domain_param_set {
389 struct mrvl_ie_header header;
391 u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
392 struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
393 } __packed;
395 struct cmd_ds_802_11d_domain_info {
396 struct cmd_header hdr;
398 __le16 action;
399 struct mrvl_ie_domain_param_set domain;
400 } __packed;
403 * Define data structure for CMD_GET_HW_SPEC
404 * This structure defines the response for the GET_HW_SPEC command
406 struct cmd_ds_get_hw_spec {
407 struct cmd_header hdr;
409 /* HW Interface version number */
410 __le16 hwifversion;
411 /* HW version number */
412 __le16 version;
413 /* Max number of TxPD FW can handle */
414 __le16 nr_txpd;
415 /* Max no of Multicast address */
416 __le16 nr_mcast_adr;
417 /* MAC address */
418 u8 permanentaddr[6];
420 /* region Code */
421 __le16 regioncode;
423 /* Number of antenna used */
424 __le16 nr_antenna;
426 /* FW release number, example 0x01030304 = 2.3.4p1 */
427 __le32 fwrelease;
429 /* Base Address of TxPD queue */
430 __le32 wcb_base;
431 /* Read Pointer of RxPd queue */
432 __le32 rxpd_rdptr;
434 /* Write Pointer of RxPd queue */
435 __le32 rxpd_wrptr;
437 /*FW/HW capability */
438 __le32 fwcapinfo;
439 } __packed;
441 struct cmd_ds_802_11_subscribe_event {
442 struct cmd_header hdr;
444 __le16 action;
445 __le16 events;
447 /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
448 * number of TLVs. From the v5.1 manual, those TLVs would add up to
449 * 40 bytes. However, future firmware might add additional TLVs, so I
450 * bump this up a bit.
452 uint8_t tlv[128];
453 } __packed;
456 * This scan handle Country Information IE(802.11d compliant)
457 * Define data structure for CMD_802_11_SCAN
459 struct cmd_ds_802_11_scan {
460 struct cmd_header hdr;
462 uint8_t bsstype;
463 uint8_t bssid[ETH_ALEN];
464 uint8_t tlvbuffer[0];
465 } __packed;
467 struct cmd_ds_802_11_scan_rsp {
468 struct cmd_header hdr;
470 __le16 bssdescriptsize;
471 uint8_t nr_sets;
472 uint8_t bssdesc_and_tlvbuffer[0];
473 } __packed;
475 struct cmd_ds_802_11_get_log {
476 struct cmd_header hdr;
478 __le32 mcasttxframe;
479 __le32 failed;
480 __le32 retry;
481 __le32 multiretry;
482 __le32 framedup;
483 __le32 rtssuccess;
484 __le32 rtsfailure;
485 __le32 ackfailure;
486 __le32 rxfrag;
487 __le32 mcastrxframe;
488 __le32 fcserror;
489 __le32 txframe;
490 __le32 wepundecryptable;
491 } __packed;
493 struct cmd_ds_mac_control {
494 struct cmd_header hdr;
495 __le16 action;
496 u16 reserved;
497 } __packed;
499 struct cmd_ds_mac_multicast_adr {
500 struct cmd_header hdr;
501 __le16 action;
502 __le16 nr_of_adrs;
503 u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
504 } __packed;
506 struct cmd_ds_802_11_authenticate {
507 struct cmd_header hdr;
509 u8 bssid[ETH_ALEN];
510 u8 authtype;
511 u8 reserved[10];
512 } __packed;
514 struct cmd_ds_802_11_deauthenticate {
515 struct cmd_header hdr;
517 u8 macaddr[ETH_ALEN];
518 __le16 reasoncode;
519 } __packed;
521 struct cmd_ds_802_11_associate {
522 struct cmd_header hdr;
524 u8 bssid[6];
525 __le16 capability;
526 __le16 listeninterval;
527 __le16 bcnperiod;
528 u8 dtimperiod;
529 u8 iebuf[512]; /* Enough for required and most optional IEs */
530 } __packed;
532 struct cmd_ds_802_11_associate_response {
533 struct cmd_header hdr;
535 __le16 capability;
536 __le16 statuscode;
537 __le16 aid;
538 u8 iebuf[512];
539 } __packed;
541 struct cmd_ds_802_11_set_wep {
542 struct cmd_header hdr;
544 /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
545 __le16 action;
547 /* key Index selected for Tx */
548 __le16 keyindex;
550 /* 40, 128bit or TXWEP */
551 uint8_t keytype[4];
552 uint8_t keymaterial[4][16];
553 } __packed;
555 struct cmd_ds_802_11_snmp_mib {
556 struct cmd_header hdr;
558 __le16 action;
559 __le16 oid;
560 __le16 bufsize;
561 u8 value[128];
562 } __packed;
564 struct cmd_ds_reg_access {
565 struct cmd_header hdr;
567 __le16 action;
568 __le16 offset;
569 union {
570 u8 bbp_rf; /* for BBP and RF registers */
571 __le32 mac; /* for MAC registers */
572 } value;
573 } __packed;
575 struct cmd_ds_802_11_radio_control {
576 struct cmd_header hdr;
578 __le16 action;
579 __le16 control;
580 } __packed;
582 struct cmd_ds_802_11_beacon_control {
583 struct cmd_header hdr;
585 __le16 action;
586 __le16 beacon_enable;
587 __le16 beacon_period;
588 } __packed;
590 struct cmd_ds_802_11_sleep_params {
591 struct cmd_header hdr;
593 /* ACT_GET/ACT_SET */
594 __le16 action;
596 /* Sleep clock error in ppm */
597 __le16 error;
599 /* Wakeup offset in usec */
600 __le16 offset;
602 /* Clock stabilization time in usec */
603 __le16 stabletime;
605 /* control periodic calibration */
606 uint8_t calcontrol;
608 /* control the use of external sleep clock */
609 uint8_t externalsleepclk;
611 /* reserved field, should be set to zero */
612 __le16 reserved;
613 } __packed;
615 struct cmd_ds_802_11_rf_channel {
616 struct cmd_header hdr;
618 __le16 action;
619 __le16 channel;
620 __le16 rftype; /* unused */
621 __le16 reserved; /* unused */
622 u8 channellist[32]; /* unused */
623 } __packed;
625 struct cmd_ds_802_11_rssi {
626 struct cmd_header hdr;
629 * request: number of beacons (N) to average the SNR and NF over
630 * response: SNR of most recent beacon
632 __le16 n_or_snr;
635 * The following fields are only set in the response.
636 * In the request these are reserved and should be set to 0.
638 __le16 nf; /* most recent beacon noise floor */
639 __le16 avg_snr; /* average SNR weighted by N from request */
640 __le16 avg_nf; /* average noise floor weighted by N from request */
641 } __packed;
643 struct cmd_ds_802_11_mac_address {
644 struct cmd_header hdr;
646 __le16 action;
647 u8 macadd[ETH_ALEN];
648 } __packed;
650 struct cmd_ds_802_11_rf_tx_power {
651 struct cmd_header hdr;
653 __le16 action;
654 __le16 curlevel;
655 s8 maxlevel;
656 s8 minlevel;
657 } __packed;
659 /* MONITOR_MODE only exists in OLPC v5 firmware */
660 struct cmd_ds_802_11_monitor_mode {
661 struct cmd_header hdr;
663 __le16 action;
664 __le16 mode;
665 } __packed;
667 struct cmd_ds_set_boot2_ver {
668 struct cmd_header hdr;
670 __le16 action;
671 __le16 version;
672 } __packed;
674 struct cmd_ds_802_11_fw_wake_method {
675 struct cmd_header hdr;
677 __le16 action;
678 __le16 method;
679 } __packed;
681 struct cmd_ds_802_11_ps_mode {
682 struct cmd_header hdr;
684 __le16 action;
687 * Interval for keepalive in PS mode:
688 * 0x0000 = don't change
689 * 0x001E = firmware default
690 * 0xFFFF = disable
692 __le16 nullpktinterval;
695 * Number of DTIM intervals to wake up for:
696 * 0 = don't change
697 * 1 = firmware default
698 * 5 = max
700 __le16 multipledtim;
702 __le16 reserved;
703 __le16 locallisteninterval;
706 * AdHoc awake period (FW v9+ only):
707 * 0 = don't change
708 * 1 = always awake (IEEE standard behavior)
709 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
710 * 32 - 254 = invalid
711 * 255 = sleep at each ATIM
713 __le16 adhoc_awake_period;
714 } __packed;
716 struct cmd_confirm_sleep {
717 struct cmd_header hdr;
719 __le16 action;
720 __le16 nullpktinterval;
721 __le16 multipledtim;
722 __le16 reserved;
723 __le16 locallisteninterval;
724 } __packed;
726 struct cmd_ds_802_11_data_rate {
727 struct cmd_header hdr;
729 __le16 action;
730 __le16 reserved;
731 u8 rates[MAX_RATES];
732 } __packed;
734 struct cmd_ds_802_11_rate_adapt_rateset {
735 struct cmd_header hdr;
736 __le16 action;
737 __le16 enablehwauto;
738 __le16 bitmap;
739 } __packed;
741 struct cmd_ds_802_11_ad_hoc_start {
742 struct cmd_header hdr;
744 u8 ssid[IEEE80211_MAX_SSID_LEN];
745 u8 bsstype;
746 __le16 beaconperiod;
747 u8 dtimperiod; /* Reserved on v9 and later */
748 struct ieee_ie_ibss_param_set ibss;
749 u8 reserved1[4];
750 struct ieee_ie_ds_param_set ds;
751 u8 reserved2[4];
752 __le16 probedelay; /* Reserved on v9 and later */
753 __le16 capability;
754 u8 rates[MAX_RATES];
755 u8 tlv_memory_size_pad[100];
756 } __packed;
758 struct cmd_ds_802_11_ad_hoc_result {
759 struct cmd_header hdr;
761 u8 pad[3];
762 u8 bssid[ETH_ALEN];
763 } __packed;
765 struct adhoc_bssdesc {
766 u8 bssid[ETH_ALEN];
767 u8 ssid[IEEE80211_MAX_SSID_LEN];
768 u8 type;
769 __le16 beaconperiod;
770 u8 dtimperiod;
771 __le64 timestamp;
772 __le64 localtime;
773 struct ieee_ie_ds_param_set ds;
774 u8 reserved1[4];
775 struct ieee_ie_ibss_param_set ibss;
776 u8 reserved2[4];
777 __le16 capability;
778 u8 rates[MAX_RATES];
781 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
782 * Adhoc join command and will cause a binary layout mismatch with
783 * the firmware
785 } __packed;
787 struct cmd_ds_802_11_ad_hoc_join {
788 struct cmd_header hdr;
790 struct adhoc_bssdesc bss;
791 __le16 failtimeout; /* Reserved on v9 and later */
792 __le16 probedelay; /* Reserved on v9 and later */
793 } __packed;
795 struct cmd_ds_802_11_ad_hoc_stop {
796 struct cmd_header hdr;
797 } __packed;
799 struct cmd_ds_802_11_enable_rsn {
800 struct cmd_header hdr;
802 __le16 action;
803 __le16 enable;
804 } __packed;
806 struct MrvlIEtype_keyParamSet {
807 /* type ID */
808 __le16 type;
810 /* length of Payload */
811 __le16 length;
813 /* type of key: WEP=0, TKIP=1, AES=2 */
814 __le16 keytypeid;
816 /* key control Info specific to a keytypeid */
817 __le16 keyinfo;
819 /* length of key */
820 __le16 keylen;
822 /* key material of size keylen */
823 u8 key[32];
824 } __packed;
826 #define MAX_WOL_RULES 16
828 struct host_wol_rule {
829 uint8_t rule_no;
830 uint8_t rule_ops;
831 __le16 sig_offset;
832 __le16 sig_length;
833 __le16 reserve;
834 __be32 sig_mask;
835 __be32 signature;
836 } __packed;
838 struct wol_config {
839 uint8_t action;
840 uint8_t pattern;
841 uint8_t no_rules_in_cmd;
842 uint8_t result;
843 struct host_wol_rule rule[MAX_WOL_RULES];
844 } __packed;
846 struct cmd_ds_host_sleep {
847 struct cmd_header hdr;
848 __le32 criteria;
849 uint8_t gpio;
850 uint16_t gap;
851 struct wol_config wol_conf;
852 } __packed;
856 struct cmd_ds_802_11_key_material {
857 struct cmd_header hdr;
859 __le16 action;
860 struct MrvlIEtype_keyParamSet keyParamSet[2];
861 } __packed;
863 struct cmd_ds_802_11_eeprom_access {
864 struct cmd_header hdr;
865 __le16 action;
866 __le16 offset;
867 __le16 len;
868 /* firmware says it returns a maximum of 20 bytes */
869 #define LBS_EEPROM_READ_LEN 20
870 u8 value[LBS_EEPROM_READ_LEN];
871 } __packed;
873 struct cmd_ds_802_11_tpc_cfg {
874 struct cmd_header hdr;
876 __le16 action;
877 uint8_t enable;
878 int8_t P0;
879 int8_t P1;
880 int8_t P2;
881 uint8_t usesnr;
882 } __packed;
885 struct cmd_ds_802_11_pa_cfg {
886 struct cmd_header hdr;
888 __le16 action;
889 uint8_t enable;
890 int8_t P0;
891 int8_t P1;
892 int8_t P2;
893 } __packed;
896 struct cmd_ds_802_11_led_ctrl {
897 struct cmd_header hdr;
899 __le16 action;
900 __le16 numled;
901 u8 data[256];
902 } __packed;
904 /* Automatic Frequency Control */
905 struct cmd_ds_802_11_afc {
906 struct cmd_header hdr;
908 __le16 afc_auto;
909 union {
910 struct {
911 __le16 threshold;
912 __le16 period;
914 struct {
915 __le16 timing_offset; /* signed */
916 __le16 carrier_offset; /* signed */
919 } __packed;
921 struct cmd_tx_rate_query {
922 __le16 txrate;
923 } __packed;
925 struct cmd_ds_get_tsf {
926 __le64 tsfvalue;
927 } __packed;
929 struct cmd_ds_bt_access {
930 struct cmd_header hdr;
932 __le16 action;
933 __le32 id;
934 u8 addr1[ETH_ALEN];
935 u8 addr2[ETH_ALEN];
936 } __packed;
938 struct cmd_ds_fwt_access {
939 struct cmd_header hdr;
941 __le16 action;
942 __le32 id;
943 u8 valid;
944 u8 da[ETH_ALEN];
945 u8 dir;
946 u8 ra[ETH_ALEN];
947 __le32 ssn;
948 __le32 dsn;
949 __le32 metric;
950 u8 rate;
951 u8 hopcount;
952 u8 ttl;
953 __le32 expiration;
954 u8 sleepmode;
955 __le32 snr;
956 __le32 references;
957 u8 prec[ETH_ALEN];
958 } __packed;
960 struct cmd_ds_mesh_config {
961 struct cmd_header hdr;
963 __le16 action;
964 __le16 channel;
965 __le16 type;
966 __le16 length;
967 u8 data[128]; /* last position reserved */
968 } __packed;
970 struct cmd_ds_mesh_access {
971 struct cmd_header hdr;
973 __le16 action;
974 __le32 data[32]; /* last position reserved */
975 } __packed;
977 /* Number of stats counters returned by the firmware */
978 #define MESH_STATS_NUM 8
979 #endif