spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / drivers / staging / cxt1e1 / libsbew.h
blob4254c0426db99ba74379f2661f61b9859f9e126c
1 #ifndef _INC_LIBSBEW_H_
2 #define _INC_LIBSBEW_H_
4 /*-----------------------------------------------------------------------------
5 * libsbew.h - common library elements, charge across mulitple boards
7 * This file contains common Ioctl structures and contents definitions.
9 * Copyright (C) 2004-2005 SBE, Inc.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * For further information, contact via email: support@sbei.com
22 * SBE, Inc. San Ramon, California U.S.A.
23 *-----------------------------------------------------------------------------
26 /********************************/
27 /** set driver logging level **/
28 /********************************/
30 /* routine/ioctl: wancfg_set_loglevel() - SBE_IOC_SET_LOGLEVEL */
32 #define LOG_NONE 0
33 #define LOG_ERROR 1
34 #define LOG_SBEBUG3 3 /* hidden, for development/debug usage */
35 #define LOG_LSCHANGE 5 /* line state change logging */
36 #define LOG_LSIMMEDIATE 6 /* line state change logging w/o hysterisis */
37 #define LOG_WARN 8
38 #define LOG_MONITOR 10
39 #define LOG_SBEBUG12 12 /* hidden, for development/debug usage */
40 #define LOG_MONITOR2 14 /* hidden, for development/debug usage */
41 #define LOG_DEBUG 16
43 /* TEMPORARY DEFINES *//* RLD DEBUG */
44 #define c4_LOG_NONE LOG_NONE
45 #define c4_LOG_ERROR LOG_ERROR
46 #define c4_LOG_WARN LOG_WARN
47 #define c4_LOG_sTrace LOG_MONITOR /* do some trace logging into
48 * functions */
49 #define c4_LOG_DEBUG LOG_DEBUG
50 #define c4_LOG_MAX LOG_DEBUG
54 /******************************/
55 /** get driver information **/
56 /******************************/
58 /* routine/ioctl: wancfg_get_drvinfo() - SBE_IOC_GET_DRVINFO */
60 #define REL_STRLEN 80
61 struct sbe_drv_info
63 int rel_strlen;
64 char release[REL_STRLEN];
68 /*****************************/
69 /** get board information **/
70 /*****************************/
72 /* routine/ioctl: wancfg_get_brdinfo() - SBE_IOC_GET_BRDINFO */
74 #define CHNM_STRLEN 16
75 struct sbe_brd_info
77 u_int32_t brd_id; /* SBE's unique PCI VENDOR/DEVID */
78 u_int32_t brd_sn;
79 int brd_chan_cnt; /* number of channels being used */
80 int brd_port_cnt; /* number of ports being used */
81 unsigned char brdno; /* our board number */
82 unsigned char brd_pci_speed; /* PCI speed, 33/66Mhz */
83 u_int8_t brd_mac_addr[6];
84 char first_iname[CHNM_STRLEN]; /* first assigned channel's
85 * interface name */
86 char last_iname[CHNM_STRLEN]; /* last assigned channel's
87 * interface name */
88 u_int8_t brd_hdw_id; /* on/board unique hdw ID */
89 u_int8_t reserved8[3]; /* alignment preservation */
90 u_int32_t reserved32[3]; /* size preservation */
93 /* These IDs are sometimes available thru pci_ids.h, but not currently. */
95 #define PCI_VENDOR_ID_SBE 0x1176
96 #define PCI_DEVICE_ID_WANPMC_C4T1E1 0x0701 /* BID 0x0X, BTYP 0x0X */
97 #define PCI_DEVICE_ID_WANPTMC_C4T1E1 0x0702 /* BID 0x41 */
98 #define PCI_DEVICE_ID_WANADAPT_HC4T1E1 0x0703 /* BID 0x44 */
99 #define PCI_DEVICE_ID_WANPTMC_256T3_T1 0x0704 /* BID 0x42 (T1 Version) */
100 #define PCI_DEVICE_ID_WANPCI_C4T1E1 0x0705 /* BID 0x1X, BTYP 0x0X */
101 #define PCI_DEVICE_ID_WANPMC_C1T3 0x0706 /* BID 0x45 */
102 #define PCI_DEVICE_ID_WANPCI_C2T1E1 0x0707 /* BID 0x1X, BTYP 0x2X */
103 #define PCI_DEVICE_ID_WANPCI_C1T1E1 0x0708 /* BID 0x1X, BTYP 0x1X */
104 #define PCI_DEVICE_ID_WANPMC_C2T1E1 0x0709 /* BID 0x0X, BTYP 0x2X */
105 #define PCI_DEVICE_ID_WANPMC_C1T1E1 0x070A /* BID 0x0X, BTYP 0x1X */
106 #define PCI_DEVICE_ID_WANPTMC_256T3_E1 0x070B /* BID 0x46 (E1 Version) */
107 #define PCI_DEVICE_ID_WANPTMC_C24TE1 0x070C /* BID 0x47 */
108 #define PCI_DEVICE_ID_WANPMC_C4T1E1_L 0x070D /* BID 0x2X, BTYPE 0x0X w/FP
109 * LEDs */
110 #define PCI_DEVICE_ID_WANPMC_C2T1E1_L 0x070E /* BID 0x2X, BTYPE 0x2X w/FP
111 * LEDs */
112 #define PCI_DEVICE_ID_WANPMC_C1T1E1_L 0x070F /* BID 0x2X, BTYPE 0x1X w/FP
113 * LEDs */
114 #define PCI_DEVICE_ID_WANPMC_2SSI 0x0801
115 #define PCI_DEVICE_ID_WANPCI_4SSI 0x0802
116 #define PCI_DEVICE_ID_WANPMC_2T3E3 0x0900 /* BID 0x43 */
117 #define SBE_BOARD_ID(v,id) ((v<<16) | id)
119 #define BINFO_PCI_SPEED_unk 0
120 #define BINFO_PCI_SPEED_33 1
121 #define BINFO_PCI_SPEED_66 2
123 /***************************/
124 /** obtain interface ID **/
125 /***************************/
127 /* routine/ioctl: wancfg_get_iid() - SBE_IOC_IID_GET */
129 struct sbe_iid_info
131 u_int32_t channum; /* channel requested */
132 char iname[CHNM_STRLEN]; /* channel's interface name */
135 /**************************************/
136 /** get board address information **/
137 /**************************************/
139 /* routine/ioctl: wancfg_get_brdaddr() - SBE_IOC_BRDADDR_GET */
141 struct sbe_brd_addr
143 unsigned char func; /* select PCI address space function */
144 unsigned char brdno; /* returns brdno requested */
145 unsigned char irq;
146 unsigned char size; /* returns size of address */
147 #define BRDADDR_SIZE_64 1
148 #define BRDADDR_SIZE_32 2
149 int reserved1; /* mod64 align, reserved for future use */
151 union
153 unsigned long virt64; /* virtual/mapped address */
154 u_int32_t virt32[2];
155 } v;
156 union
158 unsigned long phys64; /* physical bus address */
159 u_int32_t phys32[2];
160 } p;
161 int reserved2[4]; /* reserved for future use */
164 /**********************************/
165 /** read/write board registers **/
166 /**********************************/
168 /* routine/ioctl: wancfg_read_vec() - SBE_IOC_READ_VEC */
169 /* routine/ioctl: wancfg_write_vec() - SBE_IOC_WRITE_VEC */
171 struct sbecom_wrt_vec
173 u_int32_t reg;
174 u_int32_t data;
177 #define C1T3_CHIP_MSCC_32 0x01000000
178 #define C1T3_CHIP_TECT3_8 0x02000000
179 #define C1T3_CHIP_CPLD_8 0x03000000
180 #define C1T3_CHIP_EEPROM_8 0x04000000
182 #define W256T3_CHIP_MUSYCC_32 0x02000000
183 #define W256T3_CHIP_TEMUX_8 0x10000000
184 #define W256T3_CHIP_T8110_8 0x20000000
185 #define W256T3_CHIP_T8110_32 0x22000000
186 #define W256T3_CHIP_CPLD_8 0x30000000
187 #define W256T3_CHIP_EEPROM_8 0x40000000
190 /**********************************/
191 /** read write port parameters **/
192 /**********************************/
194 /* routine/ioctl: wancfg_getset_port_param() - SBE_IOC_PORT_GET */
195 /* routine/ioctl: wancfg_set_port_param() - SBE_IOC_PORT_SET */
197 /* NOTE: this structure supports hardware which supports individual per/port control */
199 struct sbecom_port_param
201 u_int8_t portnum;
202 u_int8_t port_mode; /* variations of T1 or E1 mode */
203 u_int8_t portStatus;
204 u_int8_t portP; /* more port parameters (clock source - 0x80;
205 * and LBO - 0xf; */
206 /* bits 0x70 are reserved for future use ) */
207 #ifdef SBE_PMCC4_ENABLE
208 u_int32_t hypersize; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */
209 #endif
210 int reserved[3-1]; /* reserved for future use */
211 int _res[4];
214 #define CFG_CLK_PORT_MASK 0x80 /* Loop timing */
215 #define CFG_CLK_PORT_INTERNAL 0x80 /* Loop timing */
216 #define CFG_CLK_PORT_EXTERNAL 0x00 /* Loop timing */
218 #define CFG_LBO_MASK 0x0F
219 #define CFG_LBO_unk 0 /* <not defined> */
220 #define CFG_LBO_LH0 1 /* T1 Long Haul (default) */
221 #define CFG_LBO_LH7_5 2 /* T1 Long Haul */
222 #define CFG_LBO_LH15 3 /* T1 Long Haul */
223 #define CFG_LBO_LH22_5 4 /* T1 Long Haul */
224 #define CFG_LBO_SH110 5 /* T1 Short Haul */
225 #define CFG_LBO_SH220 6 /* T1 Short Haul */
226 #define CFG_LBO_SH330 7 /* T1 Short Haul */
227 #define CFG_LBO_SH440 8 /* T1 Short Haul */
228 #define CFG_LBO_SH550 9 /* T1 Short Haul */
229 #define CFG_LBO_SH660 10 /* T1 Short Haul */
230 #define CFG_LBO_E75 11 /* E1 75 Ohm */
231 #define CFG_LBO_E120 12 /* E1 120 Ohm (default) */
234 /*************************************/
235 /** read write channel parameters **/
236 /*************************************/
238 /* routine/ioctl: wancfg_getset_chan_param() - SBE_IOC_CHAN_GET */
239 /* routine/ioctl: wancfg_set_chan_param() - SBE_IOC_CHAN_SET */
241 /* NOTE: this structure supports hardware which supports individual per/channel control */
243 struct sbecom_chan_param
245 u_int32_t channum; /* 0: */
246 #ifdef SBE_PMCC4_ENABLE
247 u_int32_t card; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */
248 u_int32_t port; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */
249 u_int8_t bitmask[32];
250 #endif
251 u_int32_t intr_mask; /* 4: interrupt mask, specify ored
252 * (SS7_)INTR_* to disable */
253 u_int8_t status; /* 8: channel transceiver status (TX_ENABLED,
254 * RX_ENABLED) */
255 u_int8_t chan_mode; /* 9: protocol mode */
256 u_int8_t idlecode; /* A: idle code, in (FLAG_7E, FLAG_FF,
257 * FLAG_00) */
258 u_int8_t pad_fill_count; /* B: pad fill count (1-127), 0 - pad
259 * fill disabled */
260 u_int8_t data_inv; /* C: channel data inversion selection */
261 u_int8_t mode_56k; /* D: 56kbps mode */
262 u_int8_t reserved[2 + 8]; /* E: */
265 /* SS7 interrupt signals <intr_mask> */
266 #define SS7_INTR_SFILT 0x00000020
267 #define SS7_INTR_SDEC 0x00000040
268 #define SS7_INTR_SINC 0x00000080
269 #define SS7_INTR_SUERR 0x00000100
270 /* Other interrupts that can be masked */
271 #define INTR_BUFF 0x00000002
272 #define INTR_EOM 0x00000004
273 #define INTR_MSG 0x00000008
274 #define INTR_IDLE 0x00000010
276 /* transceiver status flags <status> */
277 #define TX_ENABLED 0x01
278 #define RX_ENABLED 0x02
280 /* Protocol modes <mode> */
281 #define CFG_CH_PROTO_TRANS 0
282 #define CFG_CH_PROTO_SS7 1
283 #define CFG_CH_PROTO_HDLC_FCS16 2
284 #define CFG_CH_PROTO_HDLC_FCS32 3
285 #define CFG_CH_PROTO_ISLP_MODE 4
287 /* Possible idle code assignments <idlecode> */
288 #define CFG_CH_FLAG_7E 0
289 #define CFG_CH_FLAG_FF 1
290 #define CFG_CH_FLAG_00 2
292 /* data inversion selection <data_inv> */
293 #define CFG_CH_DINV_NONE 0x00
294 #define CFG_CH_DINV_RX 0x01
295 #define CFG_CH_DINV_TX 0x02
298 /* Possible resettable chipsets/functions */
299 #define RESET_DEV_TEMUX 1
300 #define RESET_DEV_TECT3 RESET_DEV_TEMUX
301 #define RESET_DEV_PLL 2
304 /*********************************************/
305 /** read reset channel thruput statistics **/
306 /*********************************************/
308 /* routine/ioctl: wancfg_get_chan_stats() - SBE_IOC_CHAN_GET_STAT */
309 /* routine/ioctl: wancfg_del_chan_stats() - SBE_IOC_CHAN_DEL_STAT */
310 /* routine/ioctl: wancfg_get_card_chan_stats() - SBE_IOC_CARD_CHAN_STAT */
312 struct sbecom_chan_stats
314 unsigned long rx_packets; /* total packets received */
315 unsigned long tx_packets; /* total packets transmitted */
316 unsigned long rx_bytes; /* total bytes received */
317 unsigned long tx_bytes; /* total bytes transmitted */
318 unsigned long rx_errors;/* bad packets received */
319 unsigned long tx_errors;/* packet transmit problems */
320 unsigned long rx_dropped; /* no space in linux buffers */
321 unsigned long tx_dropped; /* no space available in linux */
323 /* detailed rx_errors: */
324 unsigned long rx_length_errors;
325 unsigned long rx_over_errors; /* receiver ring buff overflow */
326 unsigned long rx_crc_errors; /* recved pkt with crc error */
327 unsigned long rx_frame_errors; /* recv'd frame alignment error */
328 unsigned long rx_fifo_errors; /* recv'r fifo overrun */
329 unsigned long rx_missed_errors; /* receiver missed packet */
331 /* detailed tx_errors */
332 unsigned long tx_aborted_errors;
333 unsigned long tx_fifo_errors;
334 unsigned long tx_pending;
338 /****************************************/
339 /** read write card level parameters **/
340 /****************************************/
342 /* NOTE: this structure supports hardware which supports per/card control */
344 struct sbecom_card_param
346 u_int8_t framing_type; /* 0: CBP or M13 */
347 u_int8_t loopback; /* 1: one of LOOPBACK_* */
348 u_int8_t line_build_out; /* 2: boolean */
349 u_int8_t receive_eq; /* 3: boolean */
350 u_int8_t transmit_ones; /* 4: boolean */
351 u_int8_t clock; /* 5: 0 - internal, i>0 - external (recovered
352 * from framer i) */
353 u_int8_t h110enable; /* 6: */
354 u_int8_t disable_leds; /* 7: */
355 u_int8_t reserved1; /* 8: available - old 256t3 hypersized, but
356 * never used */
357 u_int8_t rear_io; /* 9: rear I/O off/on */
358 u_int8_t disable_tx; /* A: disable TX off/on */
359 u_int8_t mute_los; /* B: mute LOS off/on */
360 u_int8_t los_threshold; /* C: LOS threshold norm/low
361 * (default: norm) */
362 u_int8_t ds1_mode; /* D: DS1 mode T1/E1 (default: T1) */
363 u_int8_t ds3_unchan; /* E: DS3 unchannelized mode off/on */
364 u_int8_t reserved[1 + 16]; /* reserved for expansion - must be
365 * ZERO filled */
368 /* framing types <framing_type> */
369 #define FRAMING_M13 0
370 #define FRAMING_CBP 1
372 /* card level loopback options <loopback> */
373 #define CFG_CARD_LOOPBACK_NONE 0x00
374 #define CFG_CARD_LOOPBACK_DIAG 0x01
375 #define CFG_CARD_LOOPBACK_LINE 0x02
376 #define CFG_CARD_LOOPBACK_PAYLOAD 0x03
378 /* line level loopback options <loopback> */
379 #define CFG_LIU_LOOPBACK_NONE 0x00
380 #define CFG_LIU_LOOPBACK_ANALOG 0x10
381 #define CFG_LIU_LOOPBACK_DIGITAL 0x11
382 #define CFG_LIU_LOOPBACK_REMOTE 0x12
384 /* card level clock options <clock> */
385 #define CFG_CLK_INTERNAL 0x00
386 #define CFG_CLK_EXTERNAL 0x01
388 /* legacy 256T3 loopback values */
389 #define LOOPBACK_NONE 0
390 #define LOOPBACK_LIU_ANALOG 1
391 #define LOOPBACK_LIU_DIGITAL 2
392 #define LOOPBACK_FRAMER_DS3 3
393 #define LOOPBACK_FRAMER_T1 4
394 #define LOOPBACK_LIU_REMOTE 5
396 /* DS1 mode <ds1_mode> */
397 #define CFG_DS1_MODE_MASK 0x0f
398 #define CFG_DS1_MODE_T1 0x00
399 #define CFG_DS1_MODE_E1 0x01
400 #define CFG_DS1_MODE_CHANGE 0x80
402 /* DS3 unchannelized values <ds1_unchan> */
403 #define CFG_DS3_UNCHAN_MASK 0x01
404 #define CFG_DS3_UNCHAN_OFF 0x00
405 #define CFG_DS3_UNCHAN_ON 0x01
408 /************************************/
409 /** read write framer parameters **/
410 /************************************/
412 /* routine/ioctl: wancfg_get_framer() - SBE_IOC_FRAMER_GET */
413 /* routine/ioctl: wancfg_set_framer() - SBE_IOC_FRAMER_SET */
415 struct sbecom_framer_param
417 u_int8_t framer_num;
418 u_int8_t frame_type; /* SF, ESF, E1PLAIN, E1CAS, E1CRC, E1CRC+CAS */
419 u_int8_t loopback_type; /* DIGITAL, LINE, PAYLOAD */
420 u_int8_t auto_alarms;/* auto alarms */
421 u_int8_t reserved[12]; /* reserved for expansion - must be
422 * ZERO filled */
425 /* frame types <frame_type> */
426 #define CFG_FRAME_NONE 0
427 #define CFG_FRAME_SF 1 /* T1 B8ZS */
428 #define CFG_FRAME_ESF 2 /* T1 B8ZS */
429 #define CFG_FRAME_E1PLAIN 3 /* HDB3 w/o CAS,CRC */
430 #define CFG_FRAME_E1CAS 4 /* HDB3 */
431 #define CFG_FRAME_E1CRC 5 /* HDB3 */
432 #define CFG_FRAME_E1CRC_CAS 6 /* HDB3 */
433 #define CFG_FRAME_SF_AMI 7 /* T1 AMI */
434 #define CFG_FRAME_ESF_AMI 8 /* T1 AMI */
435 #define CFG_FRAME_E1PLAIN_AMI 9 /* E1 AMI w/o CAS,CRC */
436 #define CFG_FRAME_E1CAS_AMI 10 /* E1 AMI */
437 #define CFG_FRAME_E1CRC_AMI 11 /* E1 AMI */
438 #define CFG_FRAME_E1CRC_CAS_AMI 12 /* E1 AMI */
440 #define IS_FRAME_ANY_T1(field) \
441 (((field) == CFG_FRAME_NONE) || \
442 ((field) == CFG_FRAME_SF) || \
443 ((field) == CFG_FRAME_ESF) || \
444 ((field) == CFG_FRAME_SF_AMI) || \
445 ((field) == CFG_FRAME_ESF_AMI))
447 #define IS_FRAME_ANY_T1ESF(field) \
448 (((field) == CFG_FRAME_ESF) || \
449 ((field) == CFG_FRAME_ESF_AMI))
451 #define IS_FRAME_ANY_E1(field) \
452 (((field) == CFG_FRAME_E1PLAIN) || \
453 ((field) == CFG_FRAME_E1CAS) || \
454 ((field) == CFG_FRAME_E1CRC) || \
455 ((field) == CFG_FRAME_E1CRC_CAS) || \
456 ((field) == CFG_FRAME_E1PLAIN_AMI) || \
457 ((field) == CFG_FRAME_E1CAS_AMI) || \
458 ((field) == CFG_FRAME_E1CRC_AMI) || \
459 ((field) == CFG_FRAME_E1CRC_CAS_AMI))
461 #define IS_FRAME_ANY_AMI(field) \
462 (((field) == CFG_FRAME_SF_AMI) || \
463 ((field) == CFG_FRAME_ESF_AMI) || \
464 ((field) == CFG_FRAME_E1PLAIN_AMI) || \
465 ((field) == CFG_FRAME_E1CAS_AMI) || \
466 ((field) == CFG_FRAME_E1CRC_AMI) || \
467 ((field) == CFG_FRAME_E1CRC_CAS_AMI))
469 /* frame level loopback options <loopback_type> */
470 #define CFG_FRMR_LOOPBACK_NONE 0
471 #define CFG_FRMR_LOOPBACK_DIAG 1
472 #define CFG_FRMR_LOOPBACK_LINE 2
473 #define CFG_FRMR_LOOPBACK_PAYLOAD 3
476 /****************************************/
477 /** read reset card error statistics **/
478 /****************************************/
480 /* routine/ioctl: wancfg_get_card_stats() - SBE_IOC_CARD_GET_STAT */
481 /* routine/ioctl: wancfg_del_card_stats() - SBE_IOC_CARD_DEL_STAT */
483 struct temux_card_stats
485 struct temux_stats
487 /* TEMUX DS3 PMON counters */
488 u_int32_t lcv;
489 u_int32_t err_framing;
490 u_int32_t febe;
491 u_int32_t err_cpbit;
492 u_int32_t err_parity;
493 /* TEMUX DS3 FRMR status */
494 u_int8_t los;
495 u_int8_t oof;
496 u_int8_t red;
497 u_int8_t yellow;
498 u_int8_t idle;
499 u_int8_t ais;
500 u_int8_t cbit;
501 /* TEMUX DS3 FEAC receiver */
502 u_int8_t feac;
503 u_int8_t feac_last;
504 } t;
505 u_int32_t tx_pending; /* total */
508 /**************************************************************/
510 struct wancfg
512 int cs, ds;
513 char *p;
515 typedef struct wancfg wcfg_t;
517 extern wcfg_t *wancfg_init (char *, char *);
518 extern int wancfg_card_blink (wcfg_t *, int);
519 extern int wancfg_ctl (wcfg_t *, int, void *, int, void *, int);
520 extern int wancfg_del_card_stats (wcfg_t *);
521 extern int wancfg_del_chan_stats (wcfg_t *, int);
522 extern int wancfg_enable_ports (wcfg_t *, int);
523 extern int wancfg_free (wcfg_t *);
524 extern int wancfg_get_brdaddr (wcfg_t *, struct sbe_brd_addr *);
525 extern int wancfg_get_brdinfo (wcfg_t *, struct sbe_brd_info *);
526 extern int wancfg_get_card (wcfg_t *, struct sbecom_card_param *);
527 extern int wancfg_get_card_chan_stats (wcfg_t *, struct sbecom_chan_stats *);
528 extern int wancfg_get_card_sn (wcfg_t *);
529 extern int wancfg_get_card_stats (wcfg_t *, struct temux_card_stats *);
530 extern int wancfg_get_chan (wcfg_t *, int, struct sbecom_chan_param *);
531 extern int wancfg_get_chan_stats (wcfg_t *, int, struct sbecom_chan_stats *);
532 extern int wancfg_get_drvinfo (wcfg_t *, int, struct sbe_drv_info *);
533 extern int wancfg_get_framer (wcfg_t *, int, struct sbecom_framer_param *);
534 extern int wancfg_get_iid (wcfg_t *, int, struct sbe_iid_info *);
535 extern int wancfg_get_sn (wcfg_t *, unsigned int *);
536 extern int wancfg_read (wcfg_t *, int, struct sbecom_wrt_vec *);
537 extern int wancfg_reset_device (wcfg_t *, int);
538 extern int wancfg_set_card (wcfg_t *, struct sbecom_card_param *);
539 extern int wancfg_set_chan (wcfg_t *, int, struct sbecom_chan_param *);
540 extern int wancfg_set_framer (wcfg_t *, int, struct sbecom_framer_param *);
541 extern int wancfg_set_loglevel (wcfg_t *, uint);
542 extern int wancfg_write (wcfg_t *, int, struct sbecom_wrt_vec *);
544 #ifdef NOT_YET_COMMON
545 extern int wancfg_get_tsioc (wcfg_t *, struct wanc1t3_ts_hdr *, struct wanc1t3_ts_param *);
546 extern int wancfg_set_tsioc (wcfg_t *, struct wanc1t3_ts_param *);
547 #endif
549 #endif /*** _INC_LIBSBEW_H_ ***/