spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / include / linux / led-lm3530.h
blob8eb12357a1105d7818b1cf40434297f03e007fbb
1 /*
2 * Copyright (C) 2011 ST-Ericsson SA.
3 * Copyright (C) 2009 Motorola, Inc.
5 * License Terms: GNU General Public License v2
7 * Simple driver for National Semiconductor LM35330 Backlight driver chip
9 * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
10 * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
13 #ifndef _LINUX_LED_LM3530_H__
14 #define _LINUX_LED_LM3530_H__
16 #define LM3530_FS_CURR_5mA (0) /* Full Scale Current */
17 #define LM3530_FS_CURR_8mA (1)
18 #define LM3530_FS_CURR_12mA (2)
19 #define LM3530_FS_CURR_15mA (3)
20 #define LM3530_FS_CURR_19mA (4)
21 #define LM3530_FS_CURR_22mA (5)
22 #define LM3530_FS_CURR_26mA (6)
23 #define LM3530_FS_CURR_29mA (7)
25 #define LM3530_ALS_AVRG_TIME_32ms (0) /* ALS Averaging Time */
26 #define LM3530_ALS_AVRG_TIME_64ms (1)
27 #define LM3530_ALS_AVRG_TIME_128ms (2)
28 #define LM3530_ALS_AVRG_TIME_256ms (3)
29 #define LM3530_ALS_AVRG_TIME_512ms (4)
30 #define LM3530_ALS_AVRG_TIME_1024ms (5)
31 #define LM3530_ALS_AVRG_TIME_2048ms (6)
32 #define LM3530_ALS_AVRG_TIME_4096ms (7)
34 #define LM3530_RAMP_TIME_1ms (0) /* Brigtness Ramp Time */
35 #define LM3530_RAMP_TIME_130ms (1) /* Max to 0 and vice versa */
36 #define LM3530_RAMP_TIME_260ms (2)
37 #define LM3530_RAMP_TIME_520ms (3)
38 #define LM3530_RAMP_TIME_1s (4)
39 #define LM3530_RAMP_TIME_2s (5)
40 #define LM3530_RAMP_TIME_4s (6)
41 #define LM3530_RAMP_TIME_8s (7)
43 /* ALS Resistor Select */
44 #define LM3530_ALS_IMPD_Z (0x00) /* ALS Impedance */
45 #define LM3530_ALS_IMPD_13_53kOhm (0x01)
46 #define LM3530_ALS_IMPD_9_01kOhm (0x02)
47 #define LM3530_ALS_IMPD_5_41kOhm (0x03)
48 #define LM3530_ALS_IMPD_2_27kOhm (0x04)
49 #define LM3530_ALS_IMPD_1_94kOhm (0x05)
50 #define LM3530_ALS_IMPD_1_81kOhm (0x06)
51 #define LM3530_ALS_IMPD_1_6kOhm (0x07)
52 #define LM3530_ALS_IMPD_1_138kOhm (0x08)
53 #define LM3530_ALS_IMPD_1_05kOhm (0x09)
54 #define LM3530_ALS_IMPD_1_011kOhm (0x0A)
55 #define LM3530_ALS_IMPD_941Ohm (0x0B)
56 #define LM3530_ALS_IMPD_759Ohm (0x0C)
57 #define LM3530_ALS_IMPD_719Ohm (0x0D)
58 #define LM3530_ALS_IMPD_700Ohm (0x0E)
59 #define LM3530_ALS_IMPD_667Ohm (0x0F)
61 enum lm3530_mode {
62 LM3530_BL_MODE_MANUAL = 0, /* "man" */
63 LM3530_BL_MODE_ALS, /* "als" */
64 LM3530_BL_MODE_PWM, /* "pwm" */
67 /* ALS input select */
68 enum lm3530_als_mode {
69 LM3530_INPUT_AVRG = 0, /* ALS1 and ALS2 input average */
70 LM3530_INPUT_ALS1, /* ALS1 Input */
71 LM3530_INPUT_ALS2, /* ALS2 Input */
72 LM3530_INPUT_CEIL, /* Max of ALS1 and ALS2 */
75 /**
76 * struct lm3530_platform_data
77 * @mode: mode of operation i.e. Manual, ALS or PWM
78 * @als_input_mode: select source of ALS input - ALS1/2 or average
79 * @max_current: full scale LED current
80 * @pwm_pol_hi: PWM input polarity - active high/active low
81 * @als_avrg_time: ALS input averaging time
82 * @brt_ramp_law: brightness mapping mode - exponential/linear
83 * @brt_ramp_fall: rate of fall of led current
84 * @brt_ramp_rise: rate of rise of led current
85 * @als1_resistor_sel: internal resistance from ALS1 input to ground
86 * @als2_resistor_sel: internal resistance from ALS2 input to ground
87 * @als_vmin: als input voltage calibrated for max brightness in mV
88 * @als_vmax: als input voltage calibrated for min brightness in mV
89 * @brt_val: brightness value (0-255)
91 struct lm3530_platform_data {
92 enum lm3530_mode mode;
93 enum lm3530_als_mode als_input_mode;
95 u8 max_current;
96 bool pwm_pol_hi;
97 u8 als_avrg_time;
99 bool brt_ramp_law;
100 u8 brt_ramp_fall;
101 u8 brt_ramp_rise;
103 u8 als1_resistor_sel;
104 u8 als2_resistor_sel;
106 u32 als_vmin;
107 u32 als_vmax;
109 u8 brt_val;
112 #endif /* _LINUX_LED_LM3530_H__ */