spi-topcliff-pch: add recovery processing in case wait-event timeout
[zen-stable.git] / sound / soc / samsung / smdk_wm8580pcm.c
blobfab5322e9f055002a3acb8a1d6b0bae06f457f38
1 /*
2 * sound/soc/samsung/smdk_wm8580pcm.c
4 * Copyright (c) 2011 Samsung Electronics Co. Ltd
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
11 #include <linux/module.h>
12 #include <sound/soc.h>
13 #include <sound/pcm_params.h>
14 #include <sound/pcm.h>
16 #include <asm/mach-types.h>
18 #include "../codecs/wm8580.h"
19 #include "dma.h"
20 #include "pcm.h"
23 * Board Settings:
24 * o '1' means 'ON'
25 * o '0' means 'OFF'
26 * o 'X' means 'Don't care'
28 * SMDK6410, SMDK6440, SMDK6450 Base B/D: CFG1-0000, CFG2-1111
29 * SMDKC110, SMDKV210: CFGB11-100100, CFGB12-0000
32 #define SMDK_WM8580_EXT_OSC 12000000
33 #define SMDK_WM8580_EXT_MCLK 4096000
34 #define SMDK_WM8580_EXT_VOICE 2048000
36 static unsigned long mclk_freq;
37 static unsigned long xtal_freq;
40 * If MCLK clock directly gets from XTAL, we don't have to use PLL
41 * to make MCLK, but if XTAL clock source connects with other codec
42 * pin (like XTI), we should have to set codec's PLL to make MCLK.
43 * Because Samsung SoC does not support pcmcdclk output like I2S.
46 static int smdk_wm8580_pcm_hw_params(struct snd_pcm_substream *substream,
47 struct snd_pcm_hw_params *params)
49 struct snd_soc_pcm_runtime *rtd = substream->private_data;
50 struct snd_soc_dai *codec_dai = rtd->codec_dai;
51 struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
52 int rfs, ret;
54 switch (params_rate(params)) {
55 case 8000:
56 break;
57 default:
58 printk(KERN_ERR "%s:%d Sampling Rate %u not supported!\n",
59 __func__, __LINE__, params_rate(params));
60 return -EINVAL;
63 rfs = mclk_freq / params_rate(params) / 2;
65 /* Set the codec DAI configuration */
66 ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B
67 | SND_SOC_DAIFMT_IB_NF
68 | SND_SOC_DAIFMT_CBS_CFS);
69 if (ret < 0)
70 return ret;
72 /* Set the cpu DAI configuration */
73 ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B
74 | SND_SOC_DAIFMT_IB_NF
75 | SND_SOC_DAIFMT_CBS_CFS);
76 if (ret < 0)
77 return ret;
79 if (mclk_freq == xtal_freq) {
80 ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_MCLK,
81 mclk_freq, SND_SOC_CLOCK_IN);
82 if (ret < 0)
83 return ret;
85 ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
86 WM8580_CLKSRC_MCLK);
87 if (ret < 0)
88 return ret;
89 } else {
90 ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
91 mclk_freq, SND_SOC_CLOCK_IN);
92 if (ret < 0)
93 return ret;
95 ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
96 WM8580_CLKSRC_PLLA);
97 if (ret < 0)
98 return ret;
100 ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
101 xtal_freq, mclk_freq);
102 if (ret < 0)
103 return ret;
106 /* Set PCM source clock on CPU */
107 ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX,
108 mclk_freq, SND_SOC_CLOCK_IN);
109 if (ret < 0)
110 return ret;
112 /* Set SCLK_DIV for making bclk */
113 ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs);
114 if (ret < 0)
115 return ret;
117 return 0;
120 static struct snd_soc_ops smdk_wm8580_pcm_ops = {
121 .hw_params = smdk_wm8580_pcm_hw_params,
124 static struct snd_soc_dai_link smdk_dai[] = {
126 .name = "WM8580 PAIF PCM RX",
127 .stream_name = "Playback",
128 .cpu_dai_name = "samsung-pcm.0",
129 .codec_dai_name = "wm8580-hifi-playback",
130 .platform_name = "samsung-audio",
131 .codec_name = "wm8580.0-001b",
132 .ops = &smdk_wm8580_pcm_ops,
133 }, {
134 .name = "WM8580 PAIF PCM TX",
135 .stream_name = "Capture",
136 .cpu_dai_name = "samsung-pcm.0",
137 .codec_dai_name = "wm8580-hifi-capture",
138 .platform_name = "samsung-audio",
139 .codec_name = "wm8580.0-001b",
140 .ops = &smdk_wm8580_pcm_ops,
144 static struct snd_soc_card smdk_pcm = {
145 .name = "SMDK-PCM",
146 .owner = THIS_MODULE,
147 .dai_link = smdk_dai,
148 .num_links = 2,
152 * After SMDKC110 Base Board's Rev is '0.1', 12MHz External OSC(X1)
153 * is absent (or not connected), so we connect EXT_VOICE_CLK(OSC4),
154 * 2.0484Mhz, directly with MCLK both Codec and SoC.
156 static int __devinit snd_smdk_probe(struct platform_device *pdev)
158 int ret = 0;
160 xtal_freq = SMDK_WM8580_EXT_OSC;
161 mclk_freq = SMDK_WM8580_EXT_MCLK;
163 if (machine_is_smdkc110() || machine_is_smdkv210())
164 xtal_freq = mclk_freq = SMDK_WM8580_EXT_VOICE;
166 smdk_pcm.dev = &pdev->dev;
167 ret = snd_soc_register_card(&smdk_pcm);
168 if (ret) {
169 dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
170 return ret;
173 return 0;
176 static int __devexit snd_smdk_remove(struct platform_device *pdev)
178 snd_soc_unregister_card(&smdk_pcm);
179 platform_set_drvdata(pdev, NULL);
180 return 0;
183 static struct platform_driver snd_smdk_driver = {
184 .driver = {
185 .owner = THIS_MODULE,
186 .name = "samsung-smdk-pcm",
188 .probe = snd_smdk_probe,
189 .remove = __devexit_p(snd_smdk_remove),
192 module_platform_driver(snd_smdk_driver);
194 MODULE_AUTHOR("Sangbeom Kim, <sbkim73@samsung.com>");
195 MODULE_DESCRIPTION("ALSA SoC SMDK WM8580 for PCM");
196 MODULE_LICENSE("GPL");