2 * Speyside audio support
4 * Copyright 2011 Wolfson Microelectronics
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
12 #include <sound/soc.h>
13 #include <sound/soc-dapm.h>
14 #include <sound/jack.h>
15 #include <linux/gpio.h>
16 #include <linux/module.h>
18 #include "../codecs/wm8996.h"
19 #include "../codecs/wm9081.h"
21 #define WM8996_HPSEL_GPIO 214
22 #define MCLK_AUDIO_RATE (512 * 48000)
24 static int speyside_set_bias_level(struct snd_soc_card
*card
,
25 struct snd_soc_dapm_context
*dapm
,
26 enum snd_soc_bias_level level
)
28 struct snd_soc_dai
*codec_dai
= card
->rtd
[0].codec_dai
;
31 if (dapm
->dev
!= codec_dai
->dev
)
35 case SND_SOC_BIAS_STANDBY
:
36 ret
= snd_soc_dai_set_sysclk(codec_dai
, WM8996_SYSCLK_MCLK2
,
37 32768, SND_SOC_CLOCK_IN
);
41 ret
= snd_soc_dai_set_pll(codec_dai
, WM8996_FLL_MCLK2
,
44 pr_err("Failed to stop FLL\n");
56 static int speyside_set_bias_level_post(struct snd_soc_card
*card
,
57 struct snd_soc_dapm_context
*dapm
,
58 enum snd_soc_bias_level level
)
60 struct snd_soc_dai
*codec_dai
= card
->rtd
[0].codec_dai
;
63 if (dapm
->dev
!= codec_dai
->dev
)
67 case SND_SOC_BIAS_PREPARE
:
68 if (card
->dapm
.bias_level
== SND_SOC_BIAS_STANDBY
) {
69 ret
= snd_soc_dai_set_pll(codec_dai
, 0,
71 32768, MCLK_AUDIO_RATE
);
73 pr_err("Failed to start FLL\n");
77 ret
= snd_soc_dai_set_sysclk(codec_dai
,
90 card
->dapm
.bias_level
= level
;
95 static int speyside_hw_params(struct snd_pcm_substream
*substream
,
96 struct snd_pcm_hw_params
*params
)
98 struct snd_soc_pcm_runtime
*rtd
= substream
->private_data
;
99 struct snd_soc_dai
*cpu_dai
= rtd
->cpu_dai
;
100 struct snd_soc_dai
*codec_dai
= rtd
->codec_dai
;
103 ret
= snd_soc_dai_set_fmt(codec_dai
, SND_SOC_DAIFMT_I2S
104 | SND_SOC_DAIFMT_NB_NF
105 | SND_SOC_DAIFMT_CBM_CFM
);
109 ret
= snd_soc_dai_set_fmt(cpu_dai
, SND_SOC_DAIFMT_I2S
110 | SND_SOC_DAIFMT_NB_NF
111 | SND_SOC_DAIFMT_CBM_CFM
);
118 static struct snd_soc_ops speyside_ops
= {
119 .hw_params
= speyside_hw_params
,
122 static struct snd_soc_jack speyside_headset
;
124 /* Headset jack detection DAPM pins */
125 static struct snd_soc_jack_pin speyside_headset_pins
[] = {
127 .pin
= "Headset Mic",
128 .mask
= SND_JACK_MICROPHONE
,
132 /* Default the headphone selection to active high */
133 static int speyside_jack_polarity
;
135 static int speyside_get_micbias(struct snd_soc_dapm_widget
*source
,
136 struct snd_soc_dapm_widget
*sink
)
138 if (speyside_jack_polarity
&& (strcmp(source
->name
, "MICB1") == 0))
140 if (!speyside_jack_polarity
&& (strcmp(source
->name
, "MICB2") == 0))
146 static void speyside_set_polarity(struct snd_soc_codec
*codec
,
149 speyside_jack_polarity
= !polarity
;
150 gpio_direction_output(WM8996_HPSEL_GPIO
, speyside_jack_polarity
);
152 /* Re-run DAPM to make sure we're using the correct mic bias */
153 snd_soc_dapm_sync(&codec
->dapm
);
156 static int speyside_wm8996_init(struct snd_soc_pcm_runtime
*rtd
)
158 struct snd_soc_dai
*dai
= rtd
->codec_dai
;
159 struct snd_soc_codec
*codec
= rtd
->codec
;
162 ret
= snd_soc_dai_set_sysclk(dai
, WM8996_SYSCLK_MCLK2
, 32768, 0);
166 ret
= gpio_request(WM8996_HPSEL_GPIO
, "HP_SEL");
168 pr_err("Failed to request HP_SEL GPIO: %d\n", ret
);
169 gpio_direction_output(WM8996_HPSEL_GPIO
, speyside_jack_polarity
);
171 ret
= snd_soc_jack_new(codec
, "Headset",
172 SND_JACK_LINEOUT
| SND_JACK_HEADSET
|
178 ret
= snd_soc_jack_add_pins(&speyside_headset
,
179 ARRAY_SIZE(speyside_headset_pins
),
180 speyside_headset_pins
);
184 wm8996_detect(codec
, &speyside_headset
, speyside_set_polarity
);
189 static int speyside_late_probe(struct snd_soc_card
*card
)
191 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Headphone");
192 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Headset Mic");
193 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Main AMIC");
194 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Main DMIC");
195 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Main Speaker");
196 snd_soc_dapm_ignore_suspend(&card
->dapm
, "WM1250 Output");
197 snd_soc_dapm_ignore_suspend(&card
->dapm
, "WM1250 Input");
202 static struct snd_soc_dai_link speyside_dai
[] = {
205 .stream_name
= "CPU",
206 .cpu_dai_name
= "samsung-i2s.0",
207 .codec_dai_name
= "wm8996-aif1",
208 .platform_name
= "samsung-audio",
209 .codec_name
= "wm8996.1-001a",
210 .init
= speyside_wm8996_init
,
211 .ops
= &speyside_ops
,
215 .stream_name
= "Baseband",
216 .cpu_dai_name
= "wm8996-aif2",
217 .codec_dai_name
= "wm1250-ev1",
218 .codec_name
= "wm1250-ev1.1-0027",
219 .ops
= &speyside_ops
,
224 static int speyside_wm9081_init(struct snd_soc_dapm_context
*dapm
)
226 /* At any time the WM9081 is active it will have this clock */
227 return snd_soc_codec_set_sysclk(dapm
->codec
, WM9081_SYSCLK_MCLK
, 0,
231 static struct snd_soc_aux_dev speyside_aux_dev
[] = {
234 .codec_name
= "wm9081.1-006c",
235 .init
= speyside_wm9081_init
,
239 static struct snd_soc_codec_conf speyside_codec_conf
[] = {
241 .dev_name
= "wm9081.1-006c",
242 .name_prefix
= "Sub",
246 static const struct snd_kcontrol_new controls
[] = {
247 SOC_DAPM_PIN_SWITCH("Main Speaker"),
248 SOC_DAPM_PIN_SWITCH("Main DMIC"),
249 SOC_DAPM_PIN_SWITCH("Main AMIC"),
250 SOC_DAPM_PIN_SWITCH("WM1250 Input"),
251 SOC_DAPM_PIN_SWITCH("WM1250 Output"),
252 SOC_DAPM_PIN_SWITCH("Headphone"),
255 static struct snd_soc_dapm_widget widgets
[] = {
256 SND_SOC_DAPM_HP("Headphone", NULL
),
257 SND_SOC_DAPM_MIC("Headset Mic", NULL
),
259 SND_SOC_DAPM_SPK("Main Speaker", NULL
),
261 SND_SOC_DAPM_MIC("Main AMIC", NULL
),
262 SND_SOC_DAPM_MIC("Main DMIC", NULL
),
265 static struct snd_soc_dapm_route audio_paths
[] = {
266 { "IN1RN", NULL
, "MICB1" },
267 { "IN1RP", NULL
, "MICB1" },
268 { "IN1RN", NULL
, "MICB2" },
269 { "IN1RP", NULL
, "MICB2" },
270 { "MICB1", NULL
, "Headset Mic", speyside_get_micbias
},
271 { "MICB2", NULL
, "Headset Mic", speyside_get_micbias
},
273 { "IN1LP", NULL
, "MICB2" },
274 { "IN1RN", NULL
, "MICB1" },
275 { "MICB2", NULL
, "Main AMIC" },
277 { "DMIC1DAT", NULL
, "MICB1" },
278 { "DMIC2DAT", NULL
, "MICB1" },
279 { "MICB1", NULL
, "Main DMIC" },
281 { "Headphone", NULL
, "HPOUT1L" },
282 { "Headphone", NULL
, "HPOUT1R" },
284 { "Sub IN1", NULL
, "HPOUT2L" },
285 { "Sub IN2", NULL
, "HPOUT2R" },
287 { "Main Speaker", NULL
, "Sub SPKN" },
288 { "Main Speaker", NULL
, "Sub SPKP" },
289 { "Main Speaker", NULL
, "SPKDAT" },
292 static struct snd_soc_card speyside
= {
294 .owner
= THIS_MODULE
,
295 .dai_link
= speyside_dai
,
296 .num_links
= ARRAY_SIZE(speyside_dai
),
297 .aux_dev
= speyside_aux_dev
,
298 .num_aux_devs
= ARRAY_SIZE(speyside_aux_dev
),
299 .codec_conf
= speyside_codec_conf
,
300 .num_configs
= ARRAY_SIZE(speyside_codec_conf
),
302 .set_bias_level
= speyside_set_bias_level
,
303 .set_bias_level_post
= speyside_set_bias_level_post
,
305 .controls
= controls
,
306 .num_controls
= ARRAY_SIZE(controls
),
307 .dapm_widgets
= widgets
,
308 .num_dapm_widgets
= ARRAY_SIZE(widgets
),
309 .dapm_routes
= audio_paths
,
310 .num_dapm_routes
= ARRAY_SIZE(audio_paths
),
311 .fully_routed
= true,
313 .late_probe
= speyside_late_probe
,
316 static __devinit
int speyside_probe(struct platform_device
*pdev
)
318 struct snd_soc_card
*card
= &speyside
;
321 card
->dev
= &pdev
->dev
;
323 ret
= snd_soc_register_card(card
);
325 dev_err(&pdev
->dev
, "snd_soc_register_card() failed: %d\n",
333 static int __devexit
speyside_remove(struct platform_device
*pdev
)
335 struct snd_soc_card
*card
= platform_get_drvdata(pdev
);
337 snd_soc_unregister_card(card
);
342 static struct platform_driver speyside_driver
= {
345 .owner
= THIS_MODULE
,
346 .pm
= &snd_soc_pm_ops
,
348 .probe
= speyside_probe
,
349 .remove
= __devexit_p(speyside_remove
),
352 module_platform_driver(speyside_driver
);
354 MODULE_DESCRIPTION("Speyside audio support");
355 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
356 MODULE_LICENSE("GPL");
357 MODULE_ALIAS("platform:speyside");