Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[zen-stable.git] / include / scsi / fc / fc_fs.h
blob50f28b143451a5ea376777905006358d8a8d5595
1 /*
2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 * Maintained at www.Open-FCoE.org
20 #ifndef _FC_FS_H_
21 #define _FC_FS_H_
23 #include <linux/types.h>
26 * Fibre Channel Framing and Signalling definitions.
27 * From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
31 * Frame header
33 struct fc_frame_header {
34 __u8 fh_r_ctl; /* routing control */
35 __u8 fh_d_id[3]; /* Destination ID */
37 __u8 fh_cs_ctl; /* class of service control / pri */
38 __u8 fh_s_id[3]; /* Source ID */
40 __u8 fh_type; /* see enum fc_fh_type below */
41 __u8 fh_f_ctl[3]; /* frame control */
43 __u8 fh_seq_id; /* sequence ID */
44 __u8 fh_df_ctl; /* data field control */
45 __be16 fh_seq_cnt; /* sequence count */
47 __be16 fh_ox_id; /* originator exchange ID */
48 __be16 fh_rx_id; /* responder exchange ID */
49 __be32 fh_parm_offset; /* parameter or relative offset */
52 #define FC_FRAME_HEADER_LEN 24 /* expected length of structure */
54 #define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */
55 #define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */
57 #define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
58 #define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
61 * fh_r_ctl - Routing control definitions.
64 * FC-4 device_data.
66 enum fc_rctl {
67 FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */
68 FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */
69 FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */
70 FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */
71 FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */
72 FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */
73 FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */
74 FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */
76 #define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */
77 #define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */
80 * Extended Link_Data
82 FC_RCTL_ELS_REQ = 0x22, /* extended link services request */
83 FC_RCTL_ELS_REP = 0x23, /* extended link services reply */
84 FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */
85 FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */
87 * Optional Extended Headers
89 FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */
90 FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */
91 FC_RCTL_ENCH = 0x52, /* encapsulation header */
93 * Basic Link Services fh_r_ctl values.
95 FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */
96 FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */
97 FC_RCTL_BA_RMC = 0x82, /* remove connection */
98 FC_RCTL_BA_ACC = 0x84, /* basic accept */
99 FC_RCTL_BA_RJT = 0x85, /* basic reject */
100 FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */
102 * Link Control Information.
104 FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */
105 FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */
106 FC_RCTL_P_RJT = 0xc2, /* port reject */
107 FC_RCTL_F_RJT = 0xc3, /* fabric reject */
108 FC_RCTL_P_BSY = 0xc4, /* port busy */
109 FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */
110 FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */
111 FC_RCTL_LCR = 0xc7, /* link credit reset */
112 FC_RCTL_END = 0xc9, /* end */
114 /* incomplete list of definitions */
117 * R_CTL names initializer.
118 * Please keep this matching the above definitions.
120 #define FC_RCTL_NAMES_INIT { \
121 [FC_RCTL_DD_UNCAT] = "uncat", \
122 [FC_RCTL_DD_SOL_DATA] = "sol data", \
123 [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \
124 [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \
125 [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \
126 [FC_RCTL_DD_DATA_DESC] = "data desc", \
127 [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \
128 [FC_RCTL_DD_CMD_STATUS] = "cmd status", \
129 [FC_RCTL_ELS_REQ] = "ELS req", \
130 [FC_RCTL_ELS_REP] = "ELS rep", \
131 [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \
132 [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \
133 [FC_RCTL_BA_NOP] = "BLS NOP", \
134 [FC_RCTL_BA_ABTS] = "BLS abort", \
135 [FC_RCTL_BA_RMC] = "BLS remove connection", \
136 [FC_RCTL_BA_ACC] = "BLS accept", \
137 [FC_RCTL_BA_RJT] = "BLS reject", \
138 [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \
139 [FC_RCTL_ACK_1] = "LC ACK_1", \
140 [FC_RCTL_ACK_0] = "LC ACK_0", \
141 [FC_RCTL_P_RJT] = "LC port reject", \
142 [FC_RCTL_F_RJT] = "LC fabric reject", \
143 [FC_RCTL_P_BSY] = "LC port busy", \
144 [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \
145 [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\
146 [FC_RCTL_LCR] = "LC link credit reset", \
147 [FC_RCTL_END] = "LC end", \
151 * Well-known fabric addresses.
153 enum fc_well_known_fid {
154 FC_FID_NONE = 0x000000, /* No destination */
155 FC_FID_BCAST = 0xffffff, /* broadcast */
156 FC_FID_FLOGI = 0xfffffe, /* fabric login */
157 FC_FID_FCTRL = 0xfffffd, /* fabric controller */
158 FC_FID_DIR_SERV = 0xfffffc, /* directory server */
159 FC_FID_TIME_SERV = 0xfffffb, /* time server */
160 FC_FID_MGMT_SERV = 0xfffffa, /* management server */
161 FC_FID_QOS = 0xfffff9, /* QoS Facilitator */
162 FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */
163 FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */
164 FC_FID_CLOCK = 0xfffff6, /* clock synch server */
165 FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */
168 #define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */
169 #define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */
172 * Other well-known addresses, outside the above contiguous range.
174 #define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */
177 * Fabric ID bytes.
179 #define FC_FID_DOMAIN 0
180 #define FC_FID_PORT 1
181 #define FC_FID_LINK 2
184 * fh_type codes
186 enum fc_fh_type {
187 FC_TYPE_BLS = 0x00, /* basic link service */
188 FC_TYPE_ELS = 0x01, /* extended link service */
189 FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */
190 FC_TYPE_FCP = 0x08, /* SCSI FCP */
191 FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */
192 FC_TYPE_ILS = 0x22, /* internal link service */
196 * FC_TYPE names initializer.
197 * Please keep this matching the above definitions.
199 #define FC_TYPE_NAMES_INIT { \
200 [FC_TYPE_BLS] = "BLS", \
201 [FC_TYPE_ELS] = "ELS", \
202 [FC_TYPE_IP] = "IP", \
203 [FC_TYPE_FCP] = "FCP", \
204 [FC_TYPE_CT] = "CT", \
205 [FC_TYPE_ILS] = "ILS", \
209 * Exchange IDs.
211 #define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */
212 #define FC_XID_MIN 0x0 /* supported min exchange ID */
213 #define FC_XID_MAX 0xfffe /* supported max exchange ID */
216 * fh_f_ctl - Frame control flags.
218 #define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */
219 #define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */
220 #define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */
221 #define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */
222 #define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */
223 #define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */
224 #define FC_FC_RES_B17 (1 << 17) /* reserved */
225 #define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */
226 #define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */
227 #define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */
229 #define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */
230 #define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */
231 #define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */
233 #define FC_FC_RES_B11 (1 << 11) /* reserved */
234 #define FC_FC_RES_B10 (1 << 10) /* reserved */
235 #define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */
236 #define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */
237 #define FC_FC_CONT_SEQ(i) ((i) << 6)
238 #define FC_FC_ABT_SEQ(i) ((i) << 4)
239 #define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */
240 #define FC_FC_RES2 (1 << 2) /* reserved */
241 #define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */
244 * BA_ACC payload.
246 struct fc_ba_acc {
247 __u8 ba_seq_id_val; /* SEQ_ID validity */
248 #define FC_BA_SEQ_ID_VAL 0x80
249 __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */
250 __u8 ba_resvd[2]; /* reserved */
251 __be16 ba_ox_id; /* OX_ID for aborted seq or exch */
252 __be16 ba_rx_id; /* RX_ID for aborted seq or exch */
253 __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */
254 __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */
258 * BA_RJT: Basic Reject payload.
260 struct fc_ba_rjt {
261 __u8 br_resvd; /* reserved */
262 __u8 br_reason; /* reason code */
263 __u8 br_explan; /* reason explanation */
264 __u8 br_vendor; /* vendor unique code */
268 * BA_RJT reason codes.
269 * From FS-2.
271 enum fc_ba_rjt_reason {
272 FC_BA_RJT_NONE = 0, /* in software this means no reject */
273 FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */
274 FC_BA_RJT_LOG_ERR = 0x03, /* logical error */
275 FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */
276 FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */
277 FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */
278 FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */
282 * BA_RJT reason code explanations.
284 enum fc_ba_rjt_explan {
285 FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */
286 FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */
287 FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */
291 * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field.
293 struct fc_pf_rjt {
294 __u8 rj_action; /* reserved */
295 __u8 rj_reason; /* reason code */
296 __u8 rj_resvd; /* reserved */
297 __u8 rj_vendor; /* vendor unique code */
301 * P_RJT and F_RJT reject reason codes.
303 enum fc_pf_rjt_reason {
304 FC_RJT_NONE = 0, /* non-reject (reserved by standard) */
305 FC_RJT_INVL_DID = 0x01, /* invalid destination ID */
306 FC_RJT_INVL_SID = 0x02, /* invalid source ID */
307 FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */
308 FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */
309 FC_RJT_CLS_UNSUP = 0x05, /* class not supported */
310 FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */
311 FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */
312 FC_RJT_LINK_CTL = 0x08, /* invalid link control */
313 FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */
314 FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */
315 FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */
316 FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */
317 FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */
318 FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */
319 FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */
320 FC_RJT_PARAM = 0x10, /* invalid parameter field */
321 FC_RJT_EXCH_ERR = 0x11, /* exchange error */
322 FC_RJT_PROTO = 0x12, /* protocol error */
323 FC_RJT_LEN = 0x13, /* incorrect length */
324 FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */
325 FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */
326 FC_RJT_LOGI_REQ = 0x16, /* login required */
327 FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */
328 FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */
329 FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */
330 FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */
331 FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */
332 FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */
333 FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */
334 FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */
335 FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */
336 FC_RJT_MCAST_ERR = 0x22, /* multicast error */
337 FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */
338 FC_RJT_PRLI_REQ = 0x24, /* process login required */
339 FC_RJT_INVL_ATT = 0x25, /* invalid attachment */
340 FC_RJT_VENDOR = 0xff, /* vendor specific reject */
343 /* default timeout values */
345 #define FC_DEF_E_D_TOV 2000UL
346 #define FC_DEF_R_A_TOV 10000UL
348 #endif /* _FC_FS_H_ */