staging: brcm80211: decreased indentation level of brcms_c_wme_setparams function

[zen-stable.git] / arch / arm / kernel / perf_event_v6.c

/*
 * ARMv6 Performance counter handling code.
 *
 * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
 *
 * ARMv6 has 2 configurable performance counters and a single cycle counter.
 * They all share a single reset bit but can be written to zero so we can use
 * that for a reset.
 *
 * The counters can't be individually enabled or disabled so when we remove
 * one event and replace it with another we could get spurious counts from the
 * wrong event. However, we can take advantage of the fact that the
 * performance counters can export events to the event bus, and the event bus
 * itself can be monitored. This requires that we *don't* export the events to
 * the event bus. The procedure for disabling a configurable counter is:
 *      - change the counter to count the ETMEXTOUT[0] signal (0x20). This
 *        effectively stops the counter from counting.
 *      - disable the counter's interrupt generation (each counter has it's
 *        own interrupt enable bit).
 * Once stopped, the counter value can be written as 0 to reset.
 *
 * To enable a counter:
 *      - enable the counter's interrupt generation.
 *      - set the new event type.
 *
 * Note: the dedicated cycle counter only counts cycles and can't be
 * enabled/disabled independently of the others. When we want to disable the
 * cycle counter, we have to just disable the interrupt reporting and start
 * ignoring that counter. When re-enabling, we have to reset the value and
 * enable the interrupt.
 */

#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
enum armv6_perf_types {
        ARMV6_PERFCTR_ICACHE_MISS           = 0x0,
        ARMV6_PERFCTR_IBUF_STALL            = 0x1,
        ARMV6_PERFCTR_DDEP_STALL            = 0x2,
        ARMV6_PERFCTR_ITLB_MISS             = 0x3,
        ARMV6_PERFCTR_DTLB_MISS             = 0x4,
        ARMV6_PERFCTR_BR_EXEC               = 0x5,
        ARMV6_PERFCTR_BR_MISPREDICT         = 0x6,
        ARMV6_PERFCTR_INSTR_EXEC            = 0x7,
        ARMV6_PERFCTR_DCACHE_HIT            = 0x9,
        ARMV6_PERFCTR_DCACHE_ACCESS         = 0xA,
        ARMV6_PERFCTR_DCACHE_MISS           = 0xB,
        ARMV6_PERFCTR_DCACHE_WBACK          = 0xC,
        ARMV6_PERFCTR_SW_PC_CHANGE          = 0xD,
        ARMV6_PERFCTR_MAIN_TLB_MISS         = 0xF,
        ARMV6_PERFCTR_EXPL_D_ACCESS         = 0x10,
        ARMV6_PERFCTR_LSU_FULL_STALL        = 0x11,
        ARMV6_PERFCTR_WBUF_DRAINED          = 0x12,
        ARMV6_PERFCTR_CPU_CYCLES            = 0xFF,
        ARMV6_PERFCTR_NOP                   = 0x20,
};

enum armv6_counters {
        ARMV6_CYCLE_COUNTER = 1,
        ARMV6_COUNTER0,
        ARMV6_COUNTER1,
};

/*
 * The hardware events that we support. We do support cache operations but
 * we have harvard caches and no way to combine instruction and data
 * accesses/misses in hardware.
 */
static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6_PERFCTR_CPU_CYCLES,
        [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6_PERFCTR_INSTR_EXEC,
        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6_PERFCTR_BR_MISPREDICT,
        [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
};

static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
                                          [PERF_COUNT_HW_CACHE_OP_MAX]
                                          [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
        [C(L1D)] = {
                /*
                 * The performance counters don't differentiate between read
                 * and write accesses/misses so this isn't strictly correct,
                 * but it's the best we can do. Writes and reads get
                 * combined.
                 */
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(L1I)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(LL)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(DTLB)] = {
                /*
                 * The ARM performance counters can count micro DTLB misses,
                 * micro ITLB misses and main TLB misses. There isn't an event
                 * for TLB misses, so use the micro misses here and if users
                 * want the main TLB misses they can use a raw counter.
                 */
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(ITLB)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(BPU)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(NODE)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
                },
        },
};

enum armv6mpcore_perf_types {
        ARMV6MPCORE_PERFCTR_ICACHE_MISS     = 0x0,
        ARMV6MPCORE_PERFCTR_IBUF_STALL      = 0x1,
        ARMV6MPCORE_PERFCTR_DDEP_STALL      = 0x2,
        ARMV6MPCORE_PERFCTR_ITLB_MISS       = 0x3,
        ARMV6MPCORE_PERFCTR_DTLB_MISS       = 0x4,
        ARMV6MPCORE_PERFCTR_BR_EXEC         = 0x5,
        ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
        ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
        ARMV6MPCORE_PERFCTR_INSTR_EXEC      = 0x8,
        ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
        ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
        ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
        ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
        ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
        ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
        ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
        ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
        ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
        ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
        ARMV6MPCORE_PERFCTR_CPU_CYCLES      = 0xFF,
};

/*
 * The hardware events that we support. We do support cache operations but
 * we have harvard caches and no way to combine instruction and data
 * accesses/misses in hardware.
 */
static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
        [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
        [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
        [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
        [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
        [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
        [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
        [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
};

static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
                                        [PERF_COUNT_HW_CACHE_OP_MAX]
                                        [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
        [C(L1D)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]  =
                                ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
                        [C(RESULT_MISS)]    =
                                ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]  =
                                ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
                        [C(RESULT_MISS)]    =
                                ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(L1I)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(LL)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(DTLB)] = {
                /*
                 * The ARM performance counters can count micro DTLB misses,
                 * micro ITLB misses and main TLB misses. There isn't an event
                 * for TLB misses, so use the micro misses here and if users
                 * want the main TLB misses they can use a raw counter.
                 */
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(ITLB)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(BPU)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
        },
        [C(NODE)] = {
                [C(OP_READ)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_WRITE)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
                [C(OP_PREFETCH)] = {
                        [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
                        [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
                },
        },
};

static inline unsigned long
armv6_pmcr_read(void)
{
        u32 val;
        asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
        return val;
}

static inline void
armv6_pmcr_write(unsigned long val)
{
        asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
}

#define ARMV6_PMCR_ENABLE               (1 << 0)
#define ARMV6_PMCR_CTR01_RESET          (1 << 1)
#define ARMV6_PMCR_CCOUNT_RESET         (1 << 2)
#define ARMV6_PMCR_CCOUNT_DIV           (1 << 3)
#define ARMV6_PMCR_COUNT0_IEN           (1 << 4)
#define ARMV6_PMCR_COUNT1_IEN           (1 << 5)
#define ARMV6_PMCR_CCOUNT_IEN           (1 << 6)
#define ARMV6_PMCR_COUNT0_OVERFLOW      (1 << 8)
#define ARMV6_PMCR_COUNT1_OVERFLOW      (1 << 9)
#define ARMV6_PMCR_CCOUNT_OVERFLOW      (1 << 10)
#define ARMV6_PMCR_EVT_COUNT0_SHIFT     20
#define ARMV6_PMCR_EVT_COUNT0_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
#define ARMV6_PMCR_EVT_COUNT1_SHIFT     12
#define ARMV6_PMCR_EVT_COUNT1_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)

#define ARMV6_PMCR_OVERFLOWED_MASK \
        (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
         ARMV6_PMCR_CCOUNT_OVERFLOW)

static inline int
armv6_pmcr_has_overflowed(unsigned long pmcr)
{
        return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
}

static inline int
armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
                                  enum armv6_counters counter)
{
        int ret = 0;

        if (ARMV6_CYCLE_COUNTER == counter)
                ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
        else if (ARMV6_COUNTER0 == counter)
                ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
        else if (ARMV6_COUNTER1 == counter)
                ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
        else
                WARN_ONCE(1, "invalid counter number (%d)\n", counter);

        return ret;
}

static inline u32
armv6pmu_read_counter(int counter)
{
        unsigned long value = 0;

        if (ARMV6_CYCLE_COUNTER == counter)
                asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
        else if (ARMV6_COUNTER0 == counter)
                asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
        else if (ARMV6_COUNTER1 == counter)
                asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
        else
                WARN_ONCE(1, "invalid counter number (%d)\n", counter);

        return value;
}

static inline void
armv6pmu_write_counter(int counter,
                       u32 value)
{
        if (ARMV6_CYCLE_COUNTER == counter)
                asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
        else if (ARMV6_COUNTER0 == counter)
                asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
        else if (ARMV6_COUNTER1 == counter)
                asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
        else
                WARN_ONCE(1, "invalid counter number (%d)\n", counter);
}

static void
armv6pmu_enable_event(struct hw_perf_event *hwc,
                      int idx)
{
        unsigned long val, mask, evt, flags;

        if (ARMV6_CYCLE_COUNTER == idx) {
                mask    = 0;
                evt     = ARMV6_PMCR_CCOUNT_IEN;
        } else if (ARMV6_COUNTER0 == idx) {
                mask    = ARMV6_PMCR_EVT_COUNT0_MASK;
                evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
                          ARMV6_PMCR_COUNT0_IEN;
        } else if (ARMV6_COUNTER1 == idx) {
                mask    = ARMV6_PMCR_EVT_COUNT1_MASK;
                evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
                          ARMV6_PMCR_COUNT1_IEN;
        } else {
                WARN_ONCE(1, "invalid counter number (%d)\n", idx);
                return;
        }

        /*
         * Mask out the current event and set the counter to count the event
         * that we're interested in.
         */
        raw_spin_lock_irqsave(&pmu_lock, flags);
        val = armv6_pmcr_read();
        val &= ~mask;
        val |= evt;
        armv6_pmcr_write(val);
        raw_spin_unlock_irqrestore(&pmu_lock, flags);
}

static irqreturn_t
armv6pmu_handle_irq(int irq_num,
                    void *dev)
{
        unsigned long pmcr = armv6_pmcr_read();
        struct perf_sample_data data;
        struct cpu_hw_events *cpuc;
        struct pt_regs *regs;
        int idx;

        if (!armv6_pmcr_has_overflowed(pmcr))
                return IRQ_NONE;

        regs = get_irq_regs();

        /*
         * The interrupts are cleared by writing the overflow flags back to
         * the control register. All of the other bits don't have any effect
         * if they are rewritten, so write the whole value back.
         */
        armv6_pmcr_write(pmcr);

        perf_sample_data_init(&data, 0);

        cpuc = &__get_cpu_var(cpu_hw_events);
        for (idx = 0; idx <= armpmu->num_events; ++idx) {
                struct perf_event *event = cpuc->events[idx];
                struct hw_perf_event *hwc;

                if (!test_bit(idx, cpuc->active_mask))
                        continue;

                /*
                 * We have a single interrupt for all counters. Check that
                 * each counter has overflowed before we process it.
                 */
                if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
                        continue;

                hwc = &event->hw;
                armpmu_event_update(event, hwc, idx, 1);
                data.period = event->hw.last_period;
                if (!armpmu_event_set_period(event, hwc, idx))
                        continue;

                if (perf_event_overflow(event, &data, regs))
                        armpmu->disable(hwc, idx);
        }

        /*
         * Handle the pending perf events.
         *
         * Note: this call *must* be run with interrupts disabled. For
         * platforms that can have the PMU interrupts raised as an NMI, this
         * will not work.
         */
        irq_work_run();

        return IRQ_HANDLED;
}

static void
armv6pmu_start(void)
{
        unsigned long flags, val;

        raw_spin_lock_irqsave(&pmu_lock, flags);
        val = armv6_pmcr_read();
        val |= ARMV6_PMCR_ENABLE;
        armv6_pmcr_write(val);
        raw_spin_unlock_irqrestore(&pmu_lock, flags);
}

static void
armv6pmu_stop(void)
{
        unsigned long flags, val;

        raw_spin_lock_irqsave(&pmu_lock, flags);
        val = armv6_pmcr_read();
        val &= ~ARMV6_PMCR_ENABLE;
        armv6_pmcr_write(val);
        raw_spin_unlock_irqrestore(&pmu_lock, flags);
}

static int
armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
                       struct hw_perf_event *event)
{
        /* Always place a cycle counter into the cycle counter. */
        if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
                if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
                        return -EAGAIN;

                return ARMV6_CYCLE_COUNTER;
        } else {
                /*
                 * For anything other than a cycle counter, try and use
                 * counter0 and counter1.
                 */
                if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
                        return ARMV6_COUNTER1;

                if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
                        return ARMV6_COUNTER0;

                /* The counters are all in use. */
                return -EAGAIN;
        }
}

static void
armv6pmu_disable_event(struct hw_perf_event *hwc,
                       int idx)
{
        unsigned long val, mask, evt, flags;

        if (ARMV6_CYCLE_COUNTER == idx) {
                mask    = ARMV6_PMCR_CCOUNT_IEN;
                evt     = 0;
        } else if (ARMV6_COUNTER0 == idx) {
                mask    = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
                evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
        } else if (ARMV6_COUNTER1 == idx) {
                mask    = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
                evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
        } else {
                WARN_ONCE(1, "invalid counter number (%d)\n", idx);
                return;
        }

        /*
         * Mask out the current event and set the counter to count the number
         * of ETM bus signal assertion cycles. The external reporting should
         * be disabled and so this should never increment.
         */
        raw_spin_lock_irqsave(&pmu_lock, flags);
        val = armv6_pmcr_read();
        val &= ~mask;
        val |= evt;
        armv6_pmcr_write(val);
        raw_spin_unlock_irqrestore(&pmu_lock, flags);
}

static void
armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
                              int idx)
{
        unsigned long val, mask, flags, evt = 0;

        if (ARMV6_CYCLE_COUNTER == idx) {
                mask    = ARMV6_PMCR_CCOUNT_IEN;
        } else if (ARMV6_COUNTER0 == idx) {
                mask    = ARMV6_PMCR_COUNT0_IEN;
        } else if (ARMV6_COUNTER1 == idx) {
                mask    = ARMV6_PMCR_COUNT1_IEN;
        } else {
                WARN_ONCE(1, "invalid counter number (%d)\n", idx);
                return;
        }

        /*
         * Unlike UP ARMv6, we don't have a way of stopping the counters. We
         * simply disable the interrupt reporting.
         */
        raw_spin_lock_irqsave(&pmu_lock, flags);
        val = armv6_pmcr_read();
        val &= ~mask;
        val |= evt;
        armv6_pmcr_write(val);
        raw_spin_unlock_irqrestore(&pmu_lock, flags);
}

static const struct arm_pmu armv6pmu = {
        .id                     = ARM_PERF_PMU_ID_V6,
        .name                   = "v6",
        .handle_irq             = armv6pmu_handle_irq,
        .enable                 = armv6pmu_enable_event,
        .disable                = armv6pmu_disable_event,
        .read_counter           = armv6pmu_read_counter,
        .write_counter          = armv6pmu_write_counter,
        .get_event_idx          = armv6pmu_get_event_idx,
        .start                  = armv6pmu_start,
        .stop                   = armv6pmu_stop,
        .cache_map              = &armv6_perf_cache_map,
        .event_map              = &armv6_perf_map,
        .raw_event_mask         = 0xFF,
        .num_events             = 3,
        .max_period             = (1LLU << 32) - 1,
};

static const struct arm_pmu *__init armv6pmu_init(void)
{
        return &armv6pmu;
}

/*
 * ARMv6mpcore is almost identical to single core ARMv6 with the exception
 * that some of the events have different enumerations and that there is no
 * *hack* to stop the programmable counters. To stop the counters we simply
 * disable the interrupt reporting and update the event. When unthrottling we
 * reset the period and enable the interrupt reporting.
 */
static const struct arm_pmu armv6mpcore_pmu = {
        .id                     = ARM_PERF_PMU_ID_V6MP,
        .name                   = "v6mpcore",
        .handle_irq             = armv6pmu_handle_irq,
        .enable                 = armv6pmu_enable_event,
        .disable                = armv6mpcore_pmu_disable_event,
        .read_counter           = armv6pmu_read_counter,
        .write_counter          = armv6pmu_write_counter,
        .get_event_idx          = armv6pmu_get_event_idx,
        .start                  = armv6pmu_start,
        .stop                   = armv6pmu_stop,
        .cache_map              = &armv6mpcore_perf_cache_map,
        .event_map              = &armv6mpcore_perf_map,
        .raw_event_mask         = 0xFF,
        .num_events             = 3,
        .max_period             = (1LLU << 32) - 1,
};

static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
        return &armv6mpcore_pmu;
}
#else
static const struct arm_pmu *__init armv6pmu_init(void)
{
        return NULL;
}

static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
        return NULL;
}
#endif  /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */