arch/powerpc/platforms/83xx/usb.c

   1 /*
   2  * Freescale 83xx USB SOC setup code
   3  *
   4  * Copyright (C) 2007 Freescale Semiconductor, Inc.
   5  * Author: Li Yang
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13
  14 #include <linux/stddef.h>
  15 #include <linux/kernel.h>
  16 #include <linux/errno.h>
  17 #include <linux/of.h>
  18
  19 #include <asm/io.h>
  20 #include <asm/prom.h>
  21 #include <sysdev/fsl_soc.h>
  22
  23 #include "mpc83xx.h"
  24
  25
  26 #ifdef CONFIG_PPC_MPC834x
  27 int mpc834x_usb_cfg(void)
  28 {
  29         unsigned long sccr, sicrl, sicrh;
  30         void __iomem *immap;
  31         struct device_node *np = NULL;
  32         int port0_is_dr = 0, port1_is_dr = 0;
  33         const void *prop, *dr_mode;
  34
  35         immap = ioremap(get_immrbase(), 0x1000);
  36         if (!immap)
  37                 return -ENOMEM;
  38
  39         /* Read registers */
  40         /* Note: DR and MPH must use the same clock setting in SCCR */
  41         sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK;
  42         sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
  43         sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
  44
  45         np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
  46         if (np) {
  47                 sccr |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
  48
  49                 prop = of_get_property(np, "phy_type", NULL);
  50                 port1_is_dr = 1;
  51                 if (prop && (!strcmp(prop, "utmi") ||
  52                                         !strcmp(prop, "utmi_wide"))) {
  53                         sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
  54                         sicrh |= MPC834X_SICRH_USB_UTMI;
  55                         port0_is_dr = 1;
  56                 } else if (prop && !strcmp(prop, "serial")) {
  57                         dr_mode = of_get_property(np, "dr_mode", NULL);
  58                         if (dr_mode && !strcmp(dr_mode, "otg")) {
  59                                 sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
  60                                 port0_is_dr = 1;
  61                         } else {
  62                                 sicrl |= MPC834X_SICRL_USB1;
  63                         }
  64                 } else if (prop && !strcmp(prop, "ulpi")) {
  65                         sicrl |= MPC834X_SICRL_USB1;
  66                 } else {
  67                         printk(KERN_WARNING "834x USB PHY type not supported\n");
  68                 }
  69                 of_node_put(np);
  70         }
  71         np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
  72         if (np) {
  73                 sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
  74
  75                 prop = of_get_property(np, "port0", NULL);
  76                 if (prop) {
  77                         if (port0_is_dr)
  78                                 printk(KERN_WARNING
  79                                         "834x USB port0 can't be used by both DR and MPH!\n");
  80                         sicrl &= ~MPC834X_SICRL_USB0;
  81                 }
  82                 prop = of_get_property(np, "port1", NULL);
  83                 if (prop) {
  84                         if (port1_is_dr)
  85                                 printk(KERN_WARNING
  86                                         "834x USB port1 can't be used by both DR and MPH!\n");
  87                         sicrl &= ~MPC834X_SICRL_USB1;
  88                 }
  89                 of_node_put(np);
  90         }
  91
  92         /* Write back */
  93         out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
  94         out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
  95         out_be32(immap + MPC83XX_SICRH_OFFS, sicrh);
  96
  97         iounmap(immap);
  98         return 0;
  99 }
 100 #endif /* CONFIG_PPC_MPC834x */
 101
 102 #ifdef CONFIG_PPC_MPC831x
 103 int mpc831x_usb_cfg(void)
 104 {
 105         u32 temp;
 106         void __iomem *immap, *usb_regs;
 107         struct device_node *np = NULL;
 108         struct device_node *immr_node = NULL;
 109         const void *prop;
 110         struct resource res;
 111         int ret = 0;
 112 #ifdef CONFIG_USB_OTG
 113         const void *dr_mode;
 114 #endif
 115
 116         np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
 117         if (!np)
 118                 return -ENODEV;
 119         prop = of_get_property(np, "phy_type", NULL);
 120
 121         /* Map IMMR space for pin and clock settings */
 122         immap = ioremap(get_immrbase(), 0x1000);
 123         if (!immap) {
 124                 of_node_put(np);
 125                 return -ENOMEM;
 126         }
 127
 128         /* Configure clock */
 129         immr_node = of_get_parent(np);
 130         if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") ||
 131                         of_device_is_compatible(immr_node, "fsl,mpc8308-immr")))
 132                 clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
 133                                 MPC8315_SCCR_USB_MASK,
 134                                 MPC8315_SCCR_USB_DRCM_01);
 135         else
 136                 clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
 137                                 MPC83XX_SCCR_USB_MASK,
 138                                 MPC83XX_SCCR_USB_DRCM_11);
 139
 140         /* Configure pin mux for ULPI.  There is no pin mux for UTMI */
 141         if (prop && !strcmp(prop, "ulpi")) {
 142                 if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
 143                         clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
 144                                         MPC8308_SICRH_USB_MASK,
 145                                         MPC8308_SICRH_USB_ULPI);
 146                 } else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
 147                         clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
 148                                         MPC8315_SICRL_USB_MASK,
 149                                         MPC8315_SICRL_USB_ULPI);
 150                         clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
 151                                         MPC8315_SICRH_USB_MASK,
 152                                         MPC8315_SICRH_USB_ULPI);
 153                 } else {
 154                         clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
 155                                         MPC831X_SICRL_USB_MASK,
 156                                         MPC831X_SICRL_USB_ULPI);
 157                         clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
 158                                         MPC831X_SICRH_USB_MASK,
 159                                         MPC831X_SICRH_USB_ULPI);
 160                 }
 161         }
 162
 163         iounmap(immap);
 164
 165         if (immr_node)
 166                 of_node_put(immr_node);
 167
 168         /* Map USB SOC space */
 169         ret = of_address_to_resource(np, 0, &res);
 170         if (ret) {
 171                 of_node_put(np);
 172                 return ret;
 173         }
 174         usb_regs = ioremap(res.start, resource_size(&res));
 175
 176         /* Using on-chip PHY */
 177         if (prop && (!strcmp(prop, "utmi_wide") ||
 178                      !strcmp(prop, "utmi"))) {
 179                 u32 refsel;
 180
 181                 if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))
 182                         goto out;
 183
 184                 if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
 185                         refsel = CONTROL_REFSEL_24MHZ;
 186                 else
 187                         refsel = CONTROL_REFSEL_48MHZ;
 188                 /* Set UTMI_PHY_EN and REFSEL */
 189                 out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
 190                                 CONTROL_UTMI_PHY_EN | refsel);
 191         /* Using external UPLI PHY */
 192         } else if (prop && !strcmp(prop, "ulpi")) {
 193                 /* Set PHY_CLK_SEL to ULPI */
 194                 temp = CONTROL_PHY_CLK_SEL_ULPI;
 195 #ifdef CONFIG_USB_OTG
 196                 /* Set OTG_PORT */
 197                 if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
 198                         dr_mode = of_get_property(np, "dr_mode", NULL);
 199                         if (dr_mode && !strcmp(dr_mode, "otg"))
 200                                 temp |= CONTROL_OTG_PORT;
 201                 }
 202 #endif /* CONFIG_USB_OTG */
 203                 out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp);
 204         } else {
 205                 printk(KERN_WARNING "831x USB PHY type not supported\n");
 206                 ret = -EINVAL;
 207         }
 208
 209 out:
 210         iounmap(usb_regs);
 211         of_node_put(np);
 212         return ret;
 213 }
 214 #endif /* CONFIG_PPC_MPC831x */
 215
 216 #ifdef CONFIG_PPC_MPC837x
 217 int mpc837x_usb_cfg(void)
 218 {
 219         void __iomem *immap;
 220         struct device_node *np = NULL;
 221         const void *prop;
 222         int ret = 0;
 223
 224         np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
 225         if (!np || !of_device_is_available(np))
 226                 return -ENODEV;
 227         prop = of_get_property(np, "phy_type", NULL);
 228
 229         if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
 230                 printk(KERN_WARNING "837x USB PHY type not supported\n");
 231                 of_node_put(np);
 232                 return -EINVAL;
 233         }
 234
 235         /* Map IMMR space for pin and clock settings */
 236         immap = ioremap(get_immrbase(), 0x1000);
 237         if (!immap) {
 238                 of_node_put(np);
 239                 return -ENOMEM;
 240         }
 241
 242         /* Configure clock */
 243         clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
 244                         MPC837X_SCCR_USB_DRCM_11);
 245
 246         /* Configure pin mux for ULPI/serial */
 247         clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
 248                         MPC837X_SICRL_USB_ULPI);
 249
 250         iounmap(immap);
 251         of_node_put(np);
 252         return ret;
 253 }
 254 #endif /* CONFIG_PPC_MPC837x */