staging: brcm80211: decreased indentation level of brcms_c_wme_setparams function
[zen-stable.git] / arch / powerpc / platforms / fsl_uli1575.c
blob8b0c2082a78305967c2f05089add88a2a6d3965b
1 /*
2 * ULI M1575 setup code - specific to Freescale boards
4 * Copyright 2007 Freescale Semiconductor Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
12 #include <linux/stddef.h>
13 #include <linux/kernel.h>
14 #include <linux/pci.h>
15 #include <linux/interrupt.h>
16 #include <linux/mc146818rtc.h>
18 #include <asm/system.h>
19 #include <asm/pci-bridge.h>
21 #define ULI_PIRQA 0x08
22 #define ULI_PIRQB 0x09
23 #define ULI_PIRQC 0x0a
24 #define ULI_PIRQD 0x0b
25 #define ULI_PIRQE 0x0c
26 #define ULI_PIRQF 0x0d
27 #define ULI_PIRQG 0x0e
29 #define ULI_8259_NONE 0x00
30 #define ULI_8259_IRQ1 0x08
31 #define ULI_8259_IRQ3 0x02
32 #define ULI_8259_IRQ4 0x04
33 #define ULI_8259_IRQ5 0x05
34 #define ULI_8259_IRQ6 0x07
35 #define ULI_8259_IRQ7 0x06
36 #define ULI_8259_IRQ9 0x01
37 #define ULI_8259_IRQ10 0x03
38 #define ULI_8259_IRQ11 0x09
39 #define ULI_8259_IRQ12 0x0b
40 #define ULI_8259_IRQ14 0x0d
41 #define ULI_8259_IRQ15 0x0f
43 u8 uli_pirq_to_irq[8] = {
44 ULI_8259_IRQ9, /* PIRQA */
45 ULI_8259_IRQ10, /* PIRQB */
46 ULI_8259_IRQ11, /* PIRQC */
47 ULI_8259_IRQ12, /* PIRQD */
48 ULI_8259_IRQ5, /* PIRQE */
49 ULI_8259_IRQ6, /* PIRQF */
50 ULI_8259_IRQ7, /* PIRQG */
51 ULI_8259_NONE, /* PIRQH */
54 static inline bool is_quirk_valid(void)
56 return (machine_is(mpc86xx_hpcn) ||
57 machine_is(mpc8544_ds) ||
58 machine_is(p2020_ds) ||
59 machine_is(mpc8572_ds));
62 /* Bridge */
63 static void __devinit early_uli5249(struct pci_dev *dev)
65 unsigned char temp;
67 if (!is_quirk_valid())
68 return;
70 pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
71 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
73 /* read/write lock */
74 pci_read_config_byte(dev, 0x7c, &temp);
75 pci_write_config_byte(dev, 0x7c, 0x80);
77 /* set as P2P bridge */
78 pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
79 dev->class |= 0x1;
81 /* restore lock */
82 pci_write_config_byte(dev, 0x7c, temp);
86 static void __devinit quirk_uli1575(struct pci_dev *dev)
88 int i;
90 if (!is_quirk_valid())
91 return;
94 * ULI1575 interrupts route setup
97 /* ULI1575 IRQ mapping conf register maps PIRQx to IRQn */
98 for (i = 0; i < 4; i++) {
99 u8 val = uli_pirq_to_irq[i*2] | (uli_pirq_to_irq[i*2+1] << 4);
100 pci_write_config_byte(dev, 0x48 + i, val);
103 /* USB 1.1 OHCI controller 1: dev 28, func 0 - IRQ12 */
104 pci_write_config_byte(dev, 0x86, ULI_PIRQD);
106 /* USB 1.1 OHCI controller 2: dev 28, func 1 - IRQ9 */
107 pci_write_config_byte(dev, 0x87, ULI_PIRQA);
109 /* USB 1.1 OHCI controller 3: dev 28, func 2 - IRQ10 */
110 pci_write_config_byte(dev, 0x88, ULI_PIRQB);
112 /* Lan controller: dev 27, func 0 - IRQ6 */
113 pci_write_config_byte(dev, 0x89, ULI_PIRQF);
115 /* AC97 Audio controller: dev 29, func 0 - IRQ6 */
116 pci_write_config_byte(dev, 0x8a, ULI_PIRQF);
118 /* Modem controller: dev 29, func 1 - IRQ6 */
119 pci_write_config_byte(dev, 0x8b, ULI_PIRQF);
121 /* HD Audio controller: dev 29, func 2 - IRQ6 */
122 pci_write_config_byte(dev, 0x8c, ULI_PIRQF);
124 /* SATA controller: dev 31, func 1 - IRQ5 */
125 pci_write_config_byte(dev, 0x8d, ULI_PIRQE);
127 /* SMB interrupt: dev 30, func 1 - IRQ7 */
128 pci_write_config_byte(dev, 0x8e, ULI_PIRQG);
130 /* PMU ACPI SCI interrupt: dev 30, func 2 - IRQ7 */
131 pci_write_config_byte(dev, 0x8f, ULI_PIRQG);
133 /* USB 2.0 controller: dev 28, func 3 */
134 pci_write_config_byte(dev, 0x74, ULI_8259_IRQ11);
136 /* Primary PATA IDE IRQ: 14
137 * Secondary PATA IDE IRQ: 15
139 pci_write_config_byte(dev, 0x44, 0x30 | ULI_8259_IRQ14);
140 pci_write_config_byte(dev, 0x75, ULI_8259_IRQ15);
143 static void __devinit quirk_final_uli1575(struct pci_dev *dev)
145 /* Set i8259 interrupt trigger
146 * IRQ 3: Level
147 * IRQ 4: Level
148 * IRQ 5: Level
149 * IRQ 6: Level
150 * IRQ 7: Level
151 * IRQ 9: Level
152 * IRQ 10: Level
153 * IRQ 11: Level
154 * IRQ 12: Level
155 * IRQ 14: Edge
156 * IRQ 15: Edge
158 if (!is_quirk_valid())
159 return;
161 outb(0xfa, 0x4d0);
162 outb(0x1e, 0x4d1);
164 /* setup RTC */
165 CMOS_WRITE(RTC_SET, RTC_CONTROL);
166 CMOS_WRITE(RTC_24H, RTC_CONTROL);
168 /* ensure month, date, and week alarm fields are ignored */
169 CMOS_WRITE(0, RTC_VALID);
171 outb_p(0x7c, 0x72);
172 outb_p(RTC_ALARM_DONT_CARE, 0x73);
174 outb_p(0x7d, 0x72);
175 outb_p(RTC_ALARM_DONT_CARE, 0x73);
178 /* SATA */
179 static void __devinit quirk_uli5288(struct pci_dev *dev)
181 unsigned char c;
182 unsigned int d;
184 if (!is_quirk_valid())
185 return;
187 /* read/write lock */
188 pci_read_config_byte(dev, 0x83, &c);
189 pci_write_config_byte(dev, 0x83, c|0x80);
191 pci_read_config_dword(dev, PCI_CLASS_REVISION, &d);
192 d = (d & 0xff) | (PCI_CLASS_STORAGE_SATA_AHCI << 8);
193 pci_write_config_dword(dev, PCI_CLASS_REVISION, d);
195 /* restore lock */
196 pci_write_config_byte(dev, 0x83, c);
198 /* disable emulated PATA mode enabled */
199 pci_read_config_byte(dev, 0x84, &c);
200 pci_write_config_byte(dev, 0x84, c & ~0x01);
203 /* PATA */
204 static void __devinit quirk_uli5229(struct pci_dev *dev)
206 unsigned short temp;
208 if (!is_quirk_valid())
209 return;
211 pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
212 PCI_COMMAND_MASTER | PCI_COMMAND_IO);
214 /* Enable Native IRQ 14/15 */
215 pci_read_config_word(dev, 0x4a, &temp);
216 pci_write_config_word(dev, 0x4a, temp | 0x1000);
219 /* We have to do a dummy read on the P2P for the RTC to work, WTF */
220 static void __devinit quirk_final_uli5249(struct pci_dev *dev)
222 int i;
223 u8 *dummy;
224 struct pci_bus *bus = dev->bus;
225 struct resource *res;
226 resource_size_t end = 0;
228 for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
229 unsigned long flags = pci_resource_flags(dev, i);
230 if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM)
231 end = pci_resource_end(dev, i);
234 pci_bus_for_each_resource(bus, res, i) {
235 if (res && res->flags & IORESOURCE_MEM) {
236 if (res->end == end)
237 dummy = ioremap(res->start, 0x4);
238 else
239 dummy = ioremap(res->end - 3, 0x4);
240 if (dummy) {
241 in_8(dummy);
242 iounmap(dummy);
244 break;
249 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
250 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
251 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
252 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
253 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
254 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
255 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
257 static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
259 u32 temp32;
261 if (!machine_is(mpc86xx_hpcd))
262 return;
264 /* Disable INTx */
265 pci_read_config_dword(dev, 0x48, &temp32);
266 pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
268 /* Enable sideband interrupt */
269 pci_read_config_dword(dev, 0x90, &temp32);
270 pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
273 static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
275 unsigned char c;
277 if (!machine_is(mpc86xx_hpcd))
278 return;
280 pci_read_config_byte(dev, 0x83, &c);
281 c |= 0x80;
282 pci_write_config_byte(dev, 0x83, c);
284 pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
285 pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
287 pci_read_config_byte(dev, 0x83, &c);
288 c &= 0x7f;
289 pci_write_config_byte(dev, 0x83, c);
293 * Since 8259PIC was disabled on the board, the IDE device can not
294 * use the legacy IRQ, we need to let the IDE device work under
295 * native mode and use the interrupt line like other PCI devices.
296 * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
297 * as the interrupt for IDE device.
299 static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
301 unsigned char c;
303 if (!machine_is(mpc86xx_hpcd))
304 return;
306 pci_read_config_byte(dev, 0x4b, &c);
307 c |= 0x10;
308 pci_write_config_byte(dev, 0x4b, c);
312 * SATA interrupt pin bug fix
313 * There's a chip bug for 5288, The interrupt pin should be 2,
314 * not the read only value 1, So it use INTB#, not INTA# which
315 * actually used by the IDE device 5229.
316 * As of this bug, during the PCI initialization, 5288 read the
317 * irq of IDE device from the device tree, this function fix this
318 * bug by re-assigning a correct irq to 5288.
321 static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
323 struct pci_controller *hose = pci_bus_to_host(dev->bus);
324 struct device_node *hosenode = hose ? hose->dn : NULL;
325 struct of_irq oirq;
326 int virq, pin = 2;
327 u32 laddr[3];
329 if (!machine_is(mpc86xx_hpcd))
330 return;
332 if (!hosenode)
333 return;
335 laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
336 laddr[1] = laddr[2] = 0;
337 of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
338 virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
339 oirq.size);
340 dev->irq = virq;
343 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
344 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
345 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
346 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
348 int uli_exclude_device(struct pci_controller *hose,
349 u_char bus, u_char devfn)
351 if (bus == (hose->first_busno + 2)) {
352 /* exclude Modem controller */
353 if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1))
354 return PCIBIOS_DEVICE_NOT_FOUND;
356 /* exclude HD Audio controller */
357 if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 2))
358 return PCIBIOS_DEVICE_NOT_FOUND;
361 return PCIBIOS_SUCCESSFUL;