staging: brcm80211: decreased indentation level of brcms_c_wme_setparams function
[zen-stable.git] / arch / x86 / kernel / acpi / cstate.c
blobf50e7fb2a201b752c5c007dc9da41397ca9c6c46
1 /*
2 * Copyright (C) 2005 Intel Corporation
3 * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
4 * - Added _PDC for SMP C-states on Intel CPUs
5 */
7 #include <linux/kernel.h>
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/acpi.h>
11 #include <linux/cpu.h>
12 #include <linux/sched.h>
14 #include <acpi/processor.h>
15 #include <asm/acpi.h>
16 #include <asm/mwait.h>
19 * Initialize bm_flags based on the CPU cache properties
20 * On SMP it depends on cache configuration
21 * - When cache is not shared among all CPUs, we flush cache
22 * before entering C3.
23 * - When cache is shared among all CPUs, we use bm_check
24 * mechanism as in UP case
26 * This routine is called only after all the CPUs are online
28 void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
29 unsigned int cpu)
31 struct cpuinfo_x86 *c = &cpu_data(cpu);
33 flags->bm_check = 0;
34 if (num_online_cpus() == 1)
35 flags->bm_check = 1;
36 else if (c->x86_vendor == X86_VENDOR_INTEL) {
38 * Today all MP CPUs that support C3 share cache.
39 * And caches should not be flushed by software while
40 * entering C3 type state.
42 flags->bm_check = 1;
46 * On all recent Intel platforms, ARB_DISABLE is a nop.
47 * So, set bm_control to zero to indicate that ARB_DISABLE
48 * is not required while entering C3 type state on
49 * P4, Core and beyond CPUs
51 if (c->x86_vendor == X86_VENDOR_INTEL &&
52 (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 0x0f)))
53 flags->bm_control = 0;
55 EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
57 /* The code below handles cstate entry with monitor-mwait pair on Intel*/
59 struct cstate_entry {
60 struct {
61 unsigned int eax;
62 unsigned int ecx;
63 } states[ACPI_PROCESSOR_MAX_POWER];
65 static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */
67 static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
69 #define NATIVE_CSTATE_BEYOND_HALT (2)
71 static long acpi_processor_ffh_cstate_probe_cpu(void *_cx)
73 struct acpi_processor_cx *cx = _cx;
74 long retval;
75 unsigned int eax, ebx, ecx, edx;
76 unsigned int edx_part;
77 unsigned int cstate_type; /* C-state type and not ACPI C-state type */
78 unsigned int num_cstate_subtype;
80 cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
82 /* Check whether this particular cx_type (in CST) is supported or not */
83 cstate_type = ((cx->address >> MWAIT_SUBSTATE_SIZE) &
84 MWAIT_CSTATE_MASK) + 1;
85 edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE);
86 num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK;
88 retval = 0;
89 if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) {
90 retval = -1;
91 goto out;
94 /* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */
95 if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
96 !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) {
97 retval = -1;
98 goto out;
101 if (!mwait_supported[cstate_type]) {
102 mwait_supported[cstate_type] = 1;
103 printk(KERN_DEBUG
104 "Monitor-Mwait will be used to enter C-%d "
105 "state\n", cx->type);
107 snprintf(cx->desc,
108 ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x",
109 cx->address);
110 out:
111 return retval;
114 int acpi_processor_ffh_cstate_probe(unsigned int cpu,
115 struct acpi_processor_cx *cx, struct acpi_power_register *reg)
117 struct cstate_entry *percpu_entry;
118 struct cpuinfo_x86 *c = &cpu_data(cpu);
119 long retval;
121 if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF)
122 return -1;
124 if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT)
125 return -1;
127 percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
128 percpu_entry->states[cx->index].eax = 0;
129 percpu_entry->states[cx->index].ecx = 0;
131 /* Make sure we are running on right CPU */
133 retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx);
134 if (retval == 0) {
135 /* Use the hint in CST */
136 percpu_entry->states[cx->index].eax = cx->address;
137 percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
141 * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
142 * then we should skip checking BM_STS for this C-state.
143 * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
145 if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
146 cx->bm_sts_skip = 1;
148 return retval;
150 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
153 * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
154 * which can obviate IPI to trigger checking of need_resched.
155 * We execute MONITOR against need_resched and enter optimized wait state
156 * through MWAIT. Whenever someone changes need_resched, we would be woken
157 * up from MWAIT (without an IPI).
159 * New with Core Duo processors, MWAIT can take some hints based on CPU
160 * capability.
162 void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
164 if (!need_resched()) {
165 if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
166 clflush((void *)&current_thread_info()->flags);
168 __monitor((void *)&current_thread_info()->flags, 0, 0);
169 smp_mb();
170 if (!need_resched())
171 __mwait(ax, cx);
175 void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
177 unsigned int cpu = smp_processor_id();
178 struct cstate_entry *percpu_entry;
180 percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
181 mwait_idle_with_hints(percpu_entry->states[cx->index].eax,
182 percpu_entry->states[cx->index].ecx);
184 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter);
186 static int __init ffh_cstate_init(void)
188 struct cpuinfo_x86 *c = &boot_cpu_data;
189 if (c->x86_vendor != X86_VENDOR_INTEL)
190 return -1;
192 cpu_cstate_entry = alloc_percpu(struct cstate_entry);
193 return 0;
196 static void __exit ffh_cstate_exit(void)
198 free_percpu(cpu_cstate_entry);
199 cpu_cstate_entry = NULL;
202 arch_initcall(ffh_cstate_init);
203 __exitcall(ffh_cstate_exit);