staging: brcm80211: decreased indentation level of brcms_c_wme_setparams function
[zen-stable.git] / arch / x86 / pci / xen.c
blob1017c7bee388ddd5016895fa17618254f10467bc
1 /*
2 * Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and
3 * initial domain support. We also handle the DSDT _PRT callbacks for GSI's
4 * used in HVM and initial domain mode (PV does not parse ACPI, so it has no
5 * concept of GSIs). Under PV we hook under the pnbbios API for IRQs and
6 * 0xcf8 PCI configuration read/write.
8 * Author: Ryan Wilson <hap9@epoch.ncsc.mil>
9 * Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
10 * Stefano Stabellini <stefano.stabellini@eu.citrix.com>
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/acpi.h>
17 #include <linux/io.h>
18 #include <asm/io_apic.h>
19 #include <asm/pci_x86.h>
21 #include <asm/xen/hypervisor.h>
23 #include <xen/features.h>
24 #include <xen/events.h>
25 #include <asm/xen/pci.h>
27 static int xen_pcifront_enable_irq(struct pci_dev *dev)
29 int rc;
30 int share = 1;
31 int pirq;
32 u8 gsi;
34 rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
35 if (rc < 0) {
36 dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
37 rc);
38 return rc;
40 /* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
41 pirq = gsi;
43 if (gsi < NR_IRQS_LEGACY)
44 share = 0;
46 rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
47 if (rc < 0) {
48 dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
49 gsi, pirq, rc);
50 return rc;
53 dev->irq = rc;
54 dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
55 return 0;
58 #ifdef CONFIG_ACPI
59 static int xen_register_pirq(u32 gsi, int gsi_override, int triggering,
60 bool set_pirq)
62 int rc, pirq = -1, irq = -1;
63 struct physdev_map_pirq map_irq;
64 int shareable = 0;
65 char *name;
67 if (set_pirq)
68 pirq = gsi;
70 map_irq.domid = DOMID_SELF;
71 map_irq.type = MAP_PIRQ_TYPE_GSI;
72 map_irq.index = gsi;
73 map_irq.pirq = pirq;
75 rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
76 if (rc) {
77 printk(KERN_WARNING "xen map irq failed %d\n", rc);
78 return -1;
81 if (triggering == ACPI_EDGE_SENSITIVE) {
82 shareable = 0;
83 name = "ioapic-edge";
84 } else {
85 shareable = 1;
86 name = "ioapic-level";
89 if (gsi_override >= 0)
90 gsi = gsi_override;
92 irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
93 if (irq < 0)
94 goto out;
96 printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
97 out:
98 return irq;
101 static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
102 int trigger, int polarity)
104 if (!xen_hvm_domain())
105 return -1;
107 return xen_register_pirq(gsi, -1 /* no GSI override */, trigger,
108 false /* no mapping of GSI to PIRQ */);
111 #ifdef CONFIG_XEN_DOM0
112 static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
114 int rc, irq;
115 struct physdev_setup_gsi setup_gsi;
117 if (!xen_pv_domain())
118 return -1;
120 printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
121 gsi, triggering, polarity);
123 irq = xen_register_pirq(gsi, gsi_override, triggering, true);
125 setup_gsi.gsi = gsi;
126 setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
127 setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
129 rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
130 if (rc == -EEXIST)
131 printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
132 else if (rc) {
133 printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
134 gsi, rc);
137 return irq;
140 static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
141 int trigger, int polarity)
143 return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
145 #endif
146 #endif
148 #if defined(CONFIG_PCI_MSI)
149 #include <linux/msi.h>
150 #include <asm/msidef.h>
152 struct xen_pci_frontend_ops *xen_pci_frontend;
153 EXPORT_SYMBOL_GPL(xen_pci_frontend);
155 static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
157 int irq, ret, i;
158 struct msi_desc *msidesc;
159 int *v;
161 v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
162 if (!v)
163 return -ENOMEM;
165 if (type == PCI_CAP_ID_MSIX)
166 ret = xen_pci_frontend_enable_msix(dev, v, nvec);
167 else
168 ret = xen_pci_frontend_enable_msi(dev, v);
169 if (ret)
170 goto error;
171 i = 0;
172 list_for_each_entry(msidesc, &dev->msi_list, list) {
173 irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
174 (type == PCI_CAP_ID_MSIX) ?
175 "pcifront-msi-x" :
176 "pcifront-msi",
177 DOMID_SELF);
178 if (irq < 0)
179 goto free;
180 i++;
182 kfree(v);
183 return 0;
185 error:
186 dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
187 free:
188 kfree(v);
189 return ret;
192 #define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
193 MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
195 static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
196 struct msi_msg *msg)
198 /* We set vector == 0 to tell the hypervisor we don't care about it,
199 * but we want a pirq setup instead.
200 * We use the dest_id field to pass the pirq that we want. */
201 msg->address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(pirq);
202 msg->address_lo =
203 MSI_ADDR_BASE_LO |
204 MSI_ADDR_DEST_MODE_PHYSICAL |
205 MSI_ADDR_REDIRECTION_CPU |
206 MSI_ADDR_DEST_ID(pirq);
208 msg->data = XEN_PIRQ_MSI_DATA;
211 static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
213 int irq, pirq;
214 struct msi_desc *msidesc;
215 struct msi_msg msg;
217 list_for_each_entry(msidesc, &dev->msi_list, list) {
218 __read_msi_msg(msidesc, &msg);
219 pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
220 ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
221 if (msg.data != XEN_PIRQ_MSI_DATA ||
222 xen_irq_from_pirq(pirq) < 0) {
223 pirq = xen_allocate_pirq_msi(dev, msidesc);
224 if (pirq < 0)
225 goto error;
226 xen_msi_compose_msg(dev, pirq, &msg);
227 __write_msi_msg(msidesc, &msg);
228 dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq);
229 } else {
230 dev_dbg(&dev->dev,
231 "xen: msi already bound to pirq=%d\n", pirq);
233 irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq, 0,
234 (type == PCI_CAP_ID_MSIX) ?
235 "msi-x" : "msi",
236 DOMID_SELF);
237 if (irq < 0)
238 goto error;
239 dev_dbg(&dev->dev,
240 "xen: msi --> pirq=%d --> irq=%d\n", pirq, irq);
242 return 0;
244 error:
245 dev_err(&dev->dev,
246 "Xen PCI frontend has not registered MSI/MSI-X support!\n");
247 return -ENODEV;
250 #ifdef CONFIG_XEN_DOM0
251 static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
253 int ret = 0;
254 struct msi_desc *msidesc;
256 list_for_each_entry(msidesc, &dev->msi_list, list) {
257 struct physdev_map_pirq map_irq;
258 domid_t domid;
260 domid = ret = xen_find_device_domain_owner(dev);
261 /* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
262 * hence check ret value for < 0. */
263 if (ret < 0)
264 domid = DOMID_SELF;
266 memset(&map_irq, 0, sizeof(map_irq));
267 map_irq.domid = domid;
268 map_irq.type = MAP_PIRQ_TYPE_MSI;
269 map_irq.index = -1;
270 map_irq.pirq = -1;
271 map_irq.bus = dev->bus->number;
272 map_irq.devfn = dev->devfn;
274 if (type == PCI_CAP_ID_MSIX) {
275 int pos;
276 u32 table_offset, bir;
278 pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
280 pci_read_config_dword(dev, pos + PCI_MSIX_TABLE,
281 &table_offset);
282 bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK);
284 map_irq.table_base = pci_resource_start(dev, bir);
285 map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
288 ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
289 if (ret) {
290 dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
291 ret, domid);
292 goto out;
295 ret = xen_bind_pirq_msi_to_irq(dev, msidesc,
296 map_irq.pirq, map_irq.index,
297 (type == PCI_CAP_ID_MSIX) ?
298 "msi-x" : "msi",
299 domid);
300 if (ret < 0)
301 goto out;
303 ret = 0;
304 out:
305 return ret;
307 #endif
309 static void xen_teardown_msi_irqs(struct pci_dev *dev)
311 struct msi_desc *msidesc;
313 msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
314 if (msidesc->msi_attrib.is_msix)
315 xen_pci_frontend_disable_msix(dev);
316 else
317 xen_pci_frontend_disable_msi(dev);
319 /* Free the IRQ's and the msidesc using the generic code. */
320 default_teardown_msi_irqs(dev);
323 static void xen_teardown_msi_irq(unsigned int irq)
325 xen_destroy_irq(irq);
328 #endif
330 int __init pci_xen_init(void)
332 if (!xen_pv_domain() || xen_initial_domain())
333 return -ENODEV;
335 printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n");
337 pcibios_set_cache_line_size();
339 pcibios_enable_irq = xen_pcifront_enable_irq;
340 pcibios_disable_irq = NULL;
342 #ifdef CONFIG_ACPI
343 /* Keep ACPI out of the picture */
344 acpi_noirq = 1;
345 #endif
347 #ifdef CONFIG_PCI_MSI
348 x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
349 x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
350 x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
351 #endif
352 return 0;
355 int __init pci_xen_hvm_init(void)
357 if (!xen_feature(XENFEAT_hvm_pirqs))
358 return 0;
360 #ifdef CONFIG_ACPI
362 * We don't want to change the actual ACPI delivery model,
363 * just how GSIs get registered.
365 __acpi_register_gsi = acpi_register_gsi_xen_hvm;
366 #endif
368 #ifdef CONFIG_PCI_MSI
369 x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
370 x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
371 #endif
372 return 0;
375 #ifdef CONFIG_XEN_DOM0
376 static __init void xen_setup_acpi_sci(void)
378 int rc;
379 int trigger, polarity;
380 int gsi = acpi_sci_override_gsi;
381 int irq = -1;
382 int gsi_override = -1;
384 if (!gsi)
385 return;
387 rc = acpi_get_override_irq(gsi, &trigger, &polarity);
388 if (rc) {
389 printk(KERN_WARNING "xen: acpi_get_override_irq failed for acpi"
390 " sci, rc=%d\n", rc);
391 return;
393 trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
394 polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
396 printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
397 "polarity=%d\n", gsi, trigger, polarity);
399 /* Before we bind the GSI to a Linux IRQ, check whether
400 * we need to override it with bus_irq (IRQ) value. Usually for
401 * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
402 * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
403 * but there are oddballs where the IRQ != GSI:
404 * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
405 * which ends up being: gsi_to_irq[9] == 20
406 * (which is what acpi_gsi_to_irq ends up calling when starting the
407 * the ACPI interpreter and keels over since IRQ 9 has not been
408 * setup as we had setup IRQ 20 for it).
410 if (acpi_gsi_to_irq(gsi, &irq) == 0) {
411 /* Use the provided value if it's valid. */
412 if (irq >= 0)
413 gsi_override = irq;
416 gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
417 printk(KERN_INFO "xen: acpi sci %d\n", gsi);
419 return;
422 int __init pci_xen_initial_domain(void)
424 int irq;
426 #ifdef CONFIG_PCI_MSI
427 x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
428 x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
429 #endif
430 xen_setup_acpi_sci();
431 __acpi_register_gsi = acpi_register_gsi_xen;
432 /* Pre-allocate legacy irqs */
433 for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
434 int trigger, polarity;
436 if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
437 continue;
439 xen_register_pirq(irq, -1 /* no GSI override */,
440 trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE,
441 true /* Map GSI to PIRQ */);
443 if (0 == nr_ioapics) {
444 for (irq = 0; irq < NR_IRQS_LEGACY; irq++)
445 xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
447 return 0;
450 struct xen_device_domain_owner {
451 domid_t domain;
452 struct pci_dev *dev;
453 struct list_head list;
456 static DEFINE_SPINLOCK(dev_domain_list_spinlock);
457 static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
459 static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
461 struct xen_device_domain_owner *owner;
463 list_for_each_entry(owner, &dev_domain_list, list) {
464 if (owner->dev == dev)
465 return owner;
467 return NULL;
470 int xen_find_device_domain_owner(struct pci_dev *dev)
472 struct xen_device_domain_owner *owner;
473 int domain = -ENODEV;
475 spin_lock(&dev_domain_list_spinlock);
476 owner = find_device(dev);
477 if (owner)
478 domain = owner->domain;
479 spin_unlock(&dev_domain_list_spinlock);
480 return domain;
482 EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
484 int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
486 struct xen_device_domain_owner *owner;
488 owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
489 if (!owner)
490 return -ENODEV;
492 spin_lock(&dev_domain_list_spinlock);
493 if (find_device(dev)) {
494 spin_unlock(&dev_domain_list_spinlock);
495 kfree(owner);
496 return -EEXIST;
498 owner->domain = domain;
499 owner->dev = dev;
500 list_add_tail(&owner->list, &dev_domain_list);
501 spin_unlock(&dev_domain_list_spinlock);
502 return 0;
504 EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
506 int xen_unregister_device_domain_owner(struct pci_dev *dev)
508 struct xen_device_domain_owner *owner;
510 spin_lock(&dev_domain_list_spinlock);
511 owner = find_device(dev);
512 if (!owner) {
513 spin_unlock(&dev_domain_list_spinlock);
514 return -ENODEV;
516 list_del(&owner->list);
517 spin_unlock(&dev_domain_list_spinlock);
518 kfree(owner);
519 return 0;
521 EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
522 #endif