staging: brcm80211: decreased indentation level of brcms_c_wme_setparams function
[zen-stable.git] / sound / pci / echoaudio / darla24.c
blob95b03306e02685fec156e7907bf3a3a87e1bf7f7
1 /*
2 * ALSA driver for Echoaudio soundcards.
3 * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 #define ECHOGALS_FAMILY
20 #define ECHOCARD_DARLA24
21 #define ECHOCARD_NAME "Darla24"
22 #define ECHOCARD_HAS_MONITOR
23 #define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
24 #define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
25 #define ECHOCARD_HAS_EXTERNAL_CLOCK
26 #define ECHOCARD_HAS_SUPER_INTERLEAVE
28 /* Pipe indexes */
29 #define PX_ANALOG_OUT 0 /* 8 */
30 #define PX_DIGITAL_OUT 8 /* 0 */
31 #define PX_ANALOG_IN 8 /* 2 */
32 #define PX_DIGITAL_IN 10 /* 0 */
33 #define PX_NUM 10
35 /* Bus indexes */
36 #define BX_ANALOG_OUT 0 /* 8 */
37 #define BX_DIGITAL_OUT 8 /* 0 */
38 #define BX_ANALOG_IN 8 /* 2 */
39 #define BX_DIGITAL_IN 10 /* 0 */
40 #define BX_NUM 10
43 #include <linux/delay.h>
44 #include <linux/init.h>
45 #include <linux/interrupt.h>
46 #include <linux/pci.h>
47 #include <linux/moduleparam.h>
48 #include <linux/firmware.h>
49 #include <linux/slab.h>
50 #include <sound/core.h>
51 #include <sound/info.h>
52 #include <sound/control.h>
53 #include <sound/tlv.h>
54 #include <sound/pcm.h>
55 #include <sound/pcm_params.h>
56 #include <sound/asoundef.h>
57 #include <sound/initval.h>
58 #include <asm/io.h>
59 #include <linux/atomic.h>
60 #include "echoaudio.h"
62 MODULE_FIRMWARE("ea/darla24_dsp.fw");
64 #define FW_DARLA24_DSP 0
66 static const struct firmware card_fw[] = {
67 {0, "darla24_dsp.fw"}
70 static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
71 {0x1057, 0x1801, 0xECC0, 0x0040, 0, 0, 0}, /* DSP 56301 Darla24 rev.0 */
72 {0x1057, 0x1801, 0xECC0, 0x0041, 0, 0, 0}, /* DSP 56301 Darla24 rev.1 */
73 {0,}
76 static struct snd_pcm_hardware pcm_hardware_skel = {
77 .info = SNDRV_PCM_INFO_MMAP |
78 SNDRV_PCM_INFO_INTERLEAVED |
79 SNDRV_PCM_INFO_BLOCK_TRANSFER |
80 SNDRV_PCM_INFO_MMAP_VALID |
81 SNDRV_PCM_INFO_PAUSE |
82 SNDRV_PCM_INFO_SYNC_START,
83 .formats = SNDRV_PCM_FMTBIT_U8 |
84 SNDRV_PCM_FMTBIT_S16_LE |
85 SNDRV_PCM_FMTBIT_S24_3LE |
86 SNDRV_PCM_FMTBIT_S32_LE |
87 SNDRV_PCM_FMTBIT_S32_BE,
88 .rates = SNDRV_PCM_RATE_8000_48000 |
89 SNDRV_PCM_RATE_88200 |
90 SNDRV_PCM_RATE_96000,
91 .rate_min = 8000,
92 .rate_max = 96000,
93 .channels_min = 1,
94 .channels_max = 8,
95 .buffer_bytes_max = 262144,
96 .period_bytes_min = 32,
97 .period_bytes_max = 131072,
98 .periods_min = 2,
99 .periods_max = 220,
100 /* One page (4k) contains 512 instructions. I don't know if the hw
101 supports lists longer than this. In this case periods_max=220 is a
102 safe limit to make sure the list never exceeds 512 instructions. */
106 #include "darla24_dsp.c"
107 #include "echoaudio_dsp.c"
108 #include "echoaudio.c"